Yield Characteristics of a New High-quality Disease-resistant Wheat Variety Chuanmai 618

[Objectives]The paper was to analyze the yield characteristics of a new high-quality disease-resistant wheat variety Chuanmai 618.[Methods]The yield characteristics of Chuanmai 618 were analyzed using the AMMI model and GGE biplot based on data from a 2-year regional test and a 1-year production test.[Results]The analysis of the AMMI model for the 2-year regional test indicated that Chuanmai 618 had a moderate yield and good stability.During the production test,Chuanmai 618 had an average yield of 450.52 kg/666.7 m^(2),an effective spike of 235700 spike/666.7 m^(2),a 1000-seed weight of 47.93 g,and a kernel number per spike of 47.28.The AMMI analysis sequencing graph showed that the varieties were ranked in the following order:Zhongkemai 1816>Chuanmai 618>Shumai 1958>Chuanyu 42>Mianmai 367>Xikemai 5518.According to the GE analysis,Chuanmai 618 had comparative advantages.[Conclusions]The new wheat variety Chuanmai 618 is a high-quality disease-resistant variety with good yield and stability.

Long-term combined application of organic and inorganic fertilizers increases crop yield sustainability by improving soil fertility in maize-wheat cropping systems

Organic material combined with inorganic fertilizer has been shown to greatly improve crop yield and maintain soil fertility globally. However, it remains unclear if crop yield and soil fertility can be sustained in the long term under the combined application of organic and inorganic fertilizers. Three long-term field trials were conducted to investigate the effects of organic amendments on the grain sustainable yield index(SYI), soil fertility index(SFI)and nutrient balance in maize–wheat cropping systems of central and southern China during 1991–2019. Five treatments were included in the trials: 1) no fertilization(control);2) balanced mineral fertilization(NPK);3) NPK plus manure(NPKM);4) high dose of NPK plus manure(1.5NPKM);and 5) NPK plus crop straw(NPKS). Over time, the grain yields of wheat and maize showed an increasing trend in all four fertilization treatments at the Yangling(YL) and Zhengzhou(ZZ) locations, while they declined at Qiyang(QY). The grain yield in the NPKM and 1.5NPKM treatments gradually exceeded that of the NPK and NPKS treatments at the QY site. The largest SYI was recorded in the NPKM treatment across the three sites, suggesting that inorganic fertilizer combined with manure can effectively improve crop yield sustainability. Higher SYI values were recorded at the YL and ZZ sites than at the QY site, possibly because the soil was more acid at QY. The key factors affecting grain yield were soil available phosphorus(AP) and available potassium(AK) at the YL and ZZ sites, and pH and AP at the QY site.All fertilization treatments resulted in soil N and P surpluses at the three sites, but soil K surpluses were recorded only at the QY site. The SFI was greater in the 1.5NPKM, NPKM and NPKS treatments than in the NPK treatment by 13.3–40.0 and 16.4–63.6% at the YL and ZZ sites, respectively, and was significantly higher in the NPKM and 1.5NPKM treatments than in the NPK and NPKS treatments at the QY site. A significant, positive linear relationship was found between SFI and crop yield, and SYI and nutrient balance, indicating that grain yield and its sustainability significantly increased with increasing soil fertility. The apparent N, P and K balances positively affected SFI.This study suggests that the appropriate amount of manure mixed with mineral NPK fertilizer is beneficial to the development of sustainable agriculture, which effectively increases the crop yield and yield sustainability by improving soil fertility.

Effects of increased seeding density on seedling characteristics,mechanical transplantation quality,and yields of rice with crop straw boards for seedling cultivation

The high labor demand during rice seedling cultivation and transplantation poses a significant challenge in advancing machine-transplanted rice cultivation.This problem may be solved by increasing the seeding rate during seedling production while reducing the number of seedling trays.This study conducted field experiments from 2021 to 2022,using transplanting seedling ages of 10 and 15 days to explore the effects of 250,300,and 350 g/tray on the seedling quality,mechanical transplantation quality,yields,and economic benefits of rice.The commonly used combination of 150 g/tray with a 20-day seedling age in rice production was used as CK.The cultivation of seedlings under a high seeding rate and short seedling age significantly affected seedling characteristics,but there was no significant difference in seedling vitality compared to CK.The minimum number of rice trays used in the experiment was observed in the treatment of 350-10(300 g/tray and 10-day seedling age),only 152-155 trays ha^(-1),resulting in a 62%reduction in the number of trays needed.By increasing the seeding rate of rice,missed holes during mechanical transplantation decreased by 2.8 to 4%.The treatment of 300-15(300 g/tray and 15-day seedling age)achieved the highest yields and economic gains.These results indicated that using crop straw boards can reduce the application of seedling trays.On that basis,rice yields can be increased by raising the seeding rate and shortening the seedling age of rice without compromising seedling quality.

Optimizing crop yields while minimizing environmental impact through deep placement of nitrogen fertilizer

Nitrogen(N)serves as an essential nutrient for yield formation across diverse crop types.However,agricultural production encounters numerous challenges,notably high N fertilizer rates coupled with low N use efficiency and serious environmental pollution.Deep placement of nitrogen fertilizer(DPNF)is an agronomic measure that shows promise in addressing these issues.This review aims to offer a comprehensive understanding of DPNF,beginning with a succinct overview of its development and methodologies for implementation.Subsequently,the optimal fertilization depth and influencing factors for different crops are analyzed and discussed.Additionally,it investigates the regulation and mechanism underlying the DPNF on crop development,yield,N use efficiency and greenhouse gas emissions.Finally,the review delineates the limitations and challenges of this technology and provides suggestions for its improvement and application.This review provides valuable insight and reference for the promotion and adoption of DPNF in agricultural practice.

Effect of N Fertilization on Yield, N Absorption and Utilization of Two Species of Super High-Yielding Summer Maize

[Objective] The aim was to study on effects of N fertilizer on yield, N absorption and utilization of different cultivars of super high-yielding summer maize, in order to provide reference for reasonable N fertilization in accordance with different cultivars. [Method] Field experiment was conducted to study on effects of different N fertilizers on yield, N absorption and use efficiency of Zhengdan 958 and Xundan 20, in order to learn the effect differences at different N fertilizer levels. [Result] After N was applied, yields of the two summer maize increased significantly. Zhengdan 958 achieved the highest in yield and proceeds at 12 051.18 kg/hm2 and 1 722.40 yuan/hm2, respectively in low N level. In contrast, Xundan 20 achieved the highest at 13 166.00 kg/hm2 and 1 343.92 yuan/hm2 in the above two aspects in high N level. Compared with Zhengdan 958, Xundan 20 increased by 9.90%, 5.20% and 12.00% in N levels of 0, 240, and 450 kg/hm2, respectively. When N fertilizers were applied, protein yield of Xundan 20 was significantly higher than that of Zhengdan 958, so that higher N fertilizers contributed higher protein yield for Xundan 20. In high N level, N efficiency, N-fertilizer utilization and partial productivity of Xundan 20 were significantly higher than that of Zhengdan 958. [Conclusion] Lower N-fertilizer was suitable for Zhengdan 958 and Xundan 20 would get a good harvest if more N-fertilizers were applied. The results provided references for reasonable N fertilization.

Study on Matter Production and Population Photosynthetic Characteristics of High-yielding Spring Maize under Different Modes

In order to construct a good population structure, improve the light energy utilization ratio, and give a full play to the high-yielding potential of spring maize, the effects of maize variety, planting density and fertilizer management on matter production and population photosynthetic physiological indices of spring maize were investigated under three different modes （traditional mode, optimized mode and high- yielding mode）. The results showed that compared with those under the traditional mode, the yield of spring maize under the optimized mode and high-yielding mode was increased by 10.79% and 27.62%, respectively, and the barren tip length was reduced significantly. Among the three modes, the leaf area index （LA/）, leaf area duration （LAD）, dry matter accumulation （DMA） and crop growth rate （CGR） all ranked as high-yielding rnode＇s〉optimized mode＇s〉traditional mode＇s. In conclusion, optimized variety, appropriately increased planting density and strengthened fertilizer management are the key measures to obtain high yield of spring maize.

Cultivation Techniques for High-yield Corn in a Karst Area of Southwest Guizhou

The cultivation techniques for high-yield corn in a karst area of southwest Guizhou were elaborated in this research from the respects of choosing farmland, preparing farmland, picking good seeds, timely sowing, rational close planting, im-proving the quality of planting, mulching, scientific fertilization, field management, timely harvest, etc. we hoped to provide a reference for the realization of high-effi-ciency corn planting in mountain areas.

Studies on the Super-high-yield Cultivation Techniques for Oats in Tibet

[Objective] The aim was to explore the optimal levels of different factors influencing oat yield in Lhasa, Tibet. [Method] Orthogonal test was conducted to analyze oat cultivation technology in Tibet. [Result] Qingyin No.2 and Baiyan No. 8 were proved the optimal species to be grown in Lhasa with optimal sowing quantity at 150-180 kg/hm2. Sowing term is an extremely significant factor affecting growing season, and species and N fertilizer are significant factors. Al factors have none significant effects on hay yield. [Conclusion] The research provides theoretical refer-ences and technological supports for large-scale planting.

Research progress on reduced lodging of high-yield and-density maize

Increasing plant density is an effective way to enhance maize yield, but often increases lodging rate and severity, significantly elevating the risk and cost of maize production. Therefore, lodging is a major factor restricting future increases in maize yield through high-density planting. This paper reviewed previous research on the relationships between maize lodging rate and plant morphology, mechanical strength of stalks, anatomical and biochemical characteristics of stalks, root characteristics, damage from pests and diseases, environmental factors, and genomic characteristics. The effects of planting density on these factors and explored possible ways to improve lodging resistance were also analyzed in this paper. The results provide a basis for future research on increasing maize lodging resistance under high-density planting conditions and can be used to develop maize cultivation practices and lodging-resistant maize cultivars.

Effects of culm carbohydrate partitioning on basal stem strength in a high-yielding rice population

Rice culm carbohydrate transport can simultaneously affect grain filling and stem lodging resistance by regulating non-structural carbohydrate(NSC) and structural carbohydrate(SC) contents. However, the relationship between carbohydrate transposition and culm strength is not well documented. Accordingly, a high-yielding hybrid rice cultivar(Y Liangyou 2) was tested under different N fertilization regimes at two locations, Taoyuan(a special high-yield eco-site), Yunnan province and Danyang(a representative eco-site of the middle and lower Yangtze), Jiangsu province, China. Significantly higher grain yield and basal stem strength were found at Taoyuan than Danyang under all N rates throughout the two-year experiment. At heading stage, soluble sugars, starch, cellulose and lignin contents of the basal culm at Taoyuan were significantly 132.0%, 73.7%, 1.2%, and 62.7% higher than those at Danyang, respectively. At 20 days after heading, soluble sugars and starch content at Taoyuan decreased significantly compared to Danyang, but lignin content remained higher. Culm carbohydrate transport to kernels at Taoyuan was significantly greater than that at Danyang, and the proportion of soluble sugars and starch was correspondingly 62.9%lower. However, the proportion of lignin and cellulose was 22.7% higher at Taoyuan than that at Danyang. Soluble sugars and starch partitioning were significantly reduced under an increased nitrogen application rate, but SC partitioning was little affected. There were significant positive correlations between basal culm bending stress and dry weight and cellulose and lignin proportions at both locations under all N rates, suggesting that the higher SC proportion at 20 days after heading was primarily responsible for culm strength.These results suggest that high-yielding rice populations with greater culm strength require both moderate NSC transport and greater SC accumulation.

A Preliminary Study on Dynamics and Models of N,P,K Absorption for High-Yield Cotton

The field experiments were carried out to investigate the dynamics and models of N, P and K absorption for the cotton plants with a lint of 3 000 kg ha-1 in Xinjiang. The main results were as follows: The contents of N, P2O5, K2O in cotton leaves, stems, squares and bolls decreased obviously with the time over the whole growth duration and the falling extent was greater in high-yield cotton than in CK. Contents of N in leaves, squares and bolls, in particular in the leaves of fruit-bearing shoot was higher in high-yield cotton than in CK. Contents of P2O5 in squares and bolls and that of K2O in stems were higher in high-yield cotton than in CK during the whole growing period. The accumulations of N, P2O5 and K2O in the cotton plants could be described with a logistic curve equation. There was the fastest nutrient uptake at about 90 d for N, 92 d for P2O5 and 85 d for K2O after emergence, respectively. Total nutrient accumulation of N, P2O5 and K2O was 385.8, 244. 7 and 340.3 kg ha-1, respectively. Approximately 12. 5 kg N, 8. 0 kg P2O5 and 11.1 kg K2O were needed for producing 100 kg lint with the leaves and stems under the super high yield condition of 3 000 kg ha-1 in Xinjiang.

Plant Ideotype at Heading for Super High-Yielding Rice in Double-Cropping System in South China

The newly released super high-yielding hybrid rice combinations, Yueza 122, Fengyou 428, Peiza 67, and the super high-yielding conventional cultivars, Guangchao 3 and Shengtai 1, were grown in both early and late seasons. The morphological characters of each population were investigated at the heading stage, and the data were analyzed by using ANOVY and other statistic methods. The plant ideal morphological characters at the heading stage were established as follows： 1 ） for the early-season cropping, 90-105 cm plant height; 11-12 tillers per plant; 35-40 em length and 2.1-2.2 cm width of flag leaf; 46-50 cm length and 1.8-2.1 cm width of the second leaf from the top （L2）; 59-64 cm length and 1.4-1.9 cm width of the third leaf from the top （L3）; 7°-14°, 18° and 200-33° for the ideal leaf angles of the flag leaf, L2 and L3, respectively; 2） for the late-season cropping, 90-100 cm plant height; 9-15 tillers per plant; 30-41 cm length and 1.8-2.0 cm width of flag leaf; 53-61 cm length and 1.3-1.8 cm width of L2; 52-58 cm length and 1.2-1.5 cm width of L3; 9°-19°, 15°-37° and 16°-49° for the ideal leaf angles of the flag leaf, L2 and L3, respectively. The main physiological characteristics of these varieties were also analyzed.

Study on Plant Morphological Traits and Production Characteristics of Super High-Yielding Soybean

Super high-yielding soybean cultivar Liaodou 14, soybean cultivars from Ohio in the United States, and the common soybean cultivars from Liaoning Province, China, with similar geographic latitudes and identical pod-bearing habits were used as the study materials for a comparison of morphological traits and production characteristics to provide a theoretical basis for the breeding of improved super high-yielding soybean cultivars. Using a randomized block design, different soybean cultivars from the same latitude were compared under conventional and unconventional treatments for their production characteristics, including morphological traits, leaf area index （LAI）, net photosynthesis rate, and dry matter accumulation. The specific characteristics of the super high-yielding soybean cultivar Liaodou 14 were analyzed. The results showed that the plant height of Liaodou 14 was significantly lower than that of the common cultivars from Liaoning, whereas the number of its main-stem nodes was higher than that of the cultivars from Ohio or Liaoning. A high pod density was observed in Liaodou 14 under conventional treatments. Under both conventional and unconventional treatments, the branch number of Liaodou 14 was markedly higher than that of the common cultivars from Liaoning, and its branch length and leaf inclination angle were significantly higher than those of common cultivars from Liaoning or Ohio. Only small changes in the leaf inclination angle were observed in Liaodou 14 treated with conventional or unconventional methods. Under each treatment, Liaodou 14 exhibited the lowest amplitude of reduction in SPAD values and net photosynthesis rates from the grain-filling to ripening stages; the cultivars from Ohio and the common cultivars from Liaoning exhibited more significant reductions. Liaodou 14 reached its peak LAI later than the other cultivars but maintained its LAI at a higher level for a longer duration. Under both conventional and unconventional treatments, Liaodou 14 produced a higher yield than the other two cultivars, with significant differences from the Ohio cultivars. In summary, super high-yielding soybean cultivars have several main features： suitable plant height, high pod density, good leaf structure with strong functionality, and slow leaf senescence at the late reproductive stage, which is conducive to the accumulation of dry matter and improved yield.

Multi-Location Investigation of Optimum Planting Density and Boll Distribution of High-Yielding Cotton (G.hirsutum L.) in Hubei Province,China

Cotton yield per unit ground area has stagnated for a dozen years in Hubei Province, China, although a series of new high- yielding varieties have been commercialized. A multi-location investigation was carried out in 2008 and 2009 in 13 counties to determine if increased planting population density （PPD） would break the stagnant yield. The results showed that significant differences among the fields existed in theoretical yield, PPD, and bolls per square meter （BPM）. The lowest yield of 1 641.1 kg ha-I was resulted from the lowest PPD of 1.7 plants m-2 and the lowest BPM of 71.8 bolls m-2, while the highest yield of 2 779.7 kg ha-~ was resulted from the highest PPD of 2.5 plants m-2, and the highest BPM of 129.4 bolls m-z. Plant mapping revealed that boll retention rate （BRR） was maintained over 30 or 40% for the first 17-18 fruiting branches （FBs） and decreased dramatically thereafter, rotten boll rate （RBR） decreased, but open boll rate （OBR） rose first and dropped later with rising FB from the bottom to the top. But BRR, RBR, and OBR were all dropped with the fruiting positions （FPs） extending outwards. The optimum range of plant density would be 2-3 plants m-2 and the proper individual plant structure would be 16-19 FBs with 5-7 FPs for cotton production in Hubei Province.

Investigation of Tree Structure Parameters of High-quality and High-yielding Y-shaped Pear Orchards

In order to study reasonable tree structure parameters of Y-shaped pear orchards in natural conditions and at management technical level of Tai'an area, the tree structure and population structure of high-quality and high-yielding Y-shaped pear orchards were investigated. The results showed that when the yield of Y-shaped 'Oshu' was 2 550 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was about 54 000, and the number of short branches was the largest, accounting for 80.1% of total number of branches, followed by middle branches, long branches and developmental branches. As the yield of Y-shaped 'Qiuyue' was 2 875 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was 51 000, and the number of short branches was the largest, accounting for 75.6% of total number of branches, followed by middle branches, long branches and developmental branches. When the yield of Y-shaped 'Niitaka' was 3 000 kg/667 m^2 in the early fully fruiting period, the quantity of the branches per 667 m^2 was 43 000, and the number of short branches was the largest, accounting for 82.0% of total number of branches, followed by long branches, middle branches and developmental branches.

Support failure of a high-stress soft-rock roadway in deep coal mine and the equalized yielding support technology： a case study

Abstract There are many soft-rock roadway coal mines in China. The surrounding rocks of the high-stress soft-rock roadways in deep mine are especially difficult to be supported using the traditional supporting way. In this study, the south wing rail roadway on the second level of Yunjialing coal mine in China was used as an example to analyze the deformation and failure characteristics and influencing factors of roadway. On this basis, this study proposed the equalized yielding support idea which employs the yielding rings to realize the pressure equalization on the bolts and cables in the section. To achieve this purpose, the first bolt-mesh-cable equalizing pressure yielding support was integrated with the second grouting reinforcement. The results proved that the yield rings of the bolts and cables on the spandrel of the arched roadway firstly developed yielding deformation; then the deformation extended to the vault of the roadway; the bolts and cables achieved a yielding extreme value of 15 and 18 tonnes, respectively. The roadway surrounding rock tended to be stable at the 26th day after the maintenance. The equalizing pressure yielding supporting technology plays a moderate pressure-releasing and actively controlling role on the surrounding rocks in the soft-rock roadway with large deformation.

Changes in Some Physiological Characteristics After Full Heading Stage in Flag Leaves of Super High-Yielding Inbred Rice

In a field experiment, rice cultivar Shanyou 63 was used as a check cultivar to investigate the changes in activity of peroxidase and contents of malondialdehyde and soluble protein after full heading stage in flag leaves of two super high-yielding inbred rice, including Shengtai 1 and Yuxiangyouzhan. The results showed that the peroxidase activities and soluble protein contents in the leaves of the three cultivars tended to increase gradually to peak values and thereafter descended during stage after full heading. Moreover, both the peroxidase activities and soluble protein contents of Shengtai 1 and Yuxiangyouzhan peaked at 8 days after full heading, which was compared with that of Shanyou 63 at 4 days later. Meanwhile, the malondialdehyde contents in the leaves of the three cultivars increased gradually after full heading stage. In addition, activities of peroxidase and contents of malondialdehyde and soluble protein in different cultivars were various at the same time. In general, for Shengtai 1 and Yuxiangyouzhan, the peroxidase activities and soluble protein contents were higher than those of Shanyou 63, whereas the malondialdehyde contents were lower compared with that of Shanyou 63. And these features could make the senescence of leaf become later and slower and photosynthetic product was more in Shengtai 1 and Yuxiangyouzhan than that in Shanyou 63.

Research Advances in High-Yielding Cultivation and Physiology of Super Rice

In 1996,China launched a program to breed super rice or super hybrid rice by combining intersubspecific heterosis with ideal plant types.Today,approximately 80 super rice varieties have been released and some of them show high grain yields of 12-21 t/hm2 in field experiments.The main reasons for the high yields of super rice varieties,compared with those of conventional varieties,can be summarized as follows：more spikelets per panicle and larger sink size （number of spikelets per square meter）;larger leaf area index,longer duration of green leaf,greater photosynthetic rate,higher lodging resistance,greater dry matter accumulation before the heading stage,greater remobilization of pre-stored carbohydrates from stems and leaves to grains during the grain-filling period;and larger root system and greater root activity.However,there are two main problems in super rice production：poor grain-filling of the later-flowering inferior spikelets （in contrast to earlier-flowering superior spikelets）,and low and unstable seed-setting rate.Here,we review recent research advances in the crop physiology of super rice,focusing on biological features,formation of yield components,and population quality.Finally,we suggest further research on crop physiology of super rice.

Characterization of high-yield performance as affected by genotype and environment in rice

We characterized yield-relevant characters and their variations over genotypes and environments （locations and years） by examining two rice varieties （9746 and Jinfeng） with high yield potential. 9746 and Jinfeng were planted in two locations of Shanghai, China, during 2005 and 2006. The results show that there was a large variation in grain yield between locations and years. The realization of high yield potential for the two types of rice was closely related to the improved sink size, such as more panicles per square meter or grains per panicle. Stem and leaf biomasses were mainly accumulated from tillering stage to heading stage, and showed slow decline during grain filling. Meanwhile, some photosynthetic characters including net photosynthesis rate （Pn）, leaf area index （LAI）, specific leaf area （SLA）, fluorescence parameter （maximum quantum yield ofPSll, Fv/Fm）, chlorophyll content （expressed as SPAD value）, as well as nutrient （N, P, K） uptake were also measured to determine their variations over genotypes and environments and their relationships with grain yield. Although there were significant differences between years or locations for most measurements, SLA at tillering and heading stages, Fv/Fm and LAI at heading stage, stem biomass at heading and maturity stages, and leaf nitrogen concentration at tillering and heading stages remained little changed, indicating their pos- sible applications as selectable characters in breeding programs. It was also found that stem nitrogen accumulation at tillering stage is one of the most important and stable traits for high yield formation.

Effects of Water Management,Arsenic and Phosphorus Levels on Rice Yield in High-Arsenic Soil-Water System

Aerobic rice （Oryza sativa L.） cultivation is considered an alternative production system to combat increased water scarcity and arsenic （As） contamination in the food chain. Pot experiments were conducted at the Wheat Research Centre, Dinajpur, Bangladesh to examine the role of water management （WM）, As and phosphorus （P） on yield and yield attributes of boro （variety BRRI dhan 29） and aman （variety BRRI dhan 32） rice. A total of 18 treatment combinations of the three levels of As （0, 20 and 40 mg/kg） and P （0, 12.5 and 25.0 mg/kg） and two WM strategies （aerobic and anaerobic） were investigated. Yield attributes were significantly affected by increasing As levels. Grain yields of BRRI dhan 29 and BRRI dhan 32 were reduced from 63.0 to 7.7 and 35.0 to 16.5 g/pot with increasing As application, respectively, indicating a greater sensitivity of BRRI dhan 29 than BRRI dhan 32. Moreover, As toxicity was reduced with aerobic compared to anaerobic WM for all P levels. During early growth stages, phytotoxic symptoms appeared on BRRI dhan 29 and BRRI dhan 32 rice stems with increasing As levels without applying P under anaerobic WM. Under anaerobic and As-contaminated conditions, BRRI dhan 29 was highly susceptible to straighthead, which dramatically reduced grain yields. There were significant relationships between the number of effective tillers per pot and root dry weight, grain yield, and number of fertile and unfertile grains per pot for both BRRI dhan 29 and BRRI dhan 32 （P＆lt;0.001）. Our findings indicate that rice could be grown aerobically in As-contaminated areas with a reduced risk of As toxicity and yield loss.