In mould design, it is necessary for a designer to ensure that the cylinder has enough intensity in both the prestressed and synthesis states. An individual layer cylindrical mould cannot withstand a very high pressur...In mould design, it is necessary for a designer to ensure that the cylinder has enough intensity in both the prestressed and synthesis states. An individual layer cylindrical mould cannot withstand a very high pressure needed in polycrystalline diamond composite (PDC) production. So, multi-layer prepressure combination assemble moulds are often used. The analysis conducted here is to study the interaction of cylindrical layers and to explain how to obtain enough load capability with the lowest requirement of material performance. The ratio of the pressure cylinder radius of synthetic diamond is 3.27, which is close to the optimal value and can be used as structure size in a design for PDC bit compact die. There is a linear relationship between the internal and external pressures under a special tangent stress on the inner wall of the pressure cylinder. So, when two of the three parameters (the internal pressure, external pressure, and the requirement value of the tangent stress on the inner wall of the pressure cylinder) are given, the third can be obtained. The sleeve acts as a bridge?between the pressure cylinder and the steel belts. The optimum model developed in this paper can be used in PDC bit compact die design and other similar prestressed cold extrusion die design.展开更多
深水钻井二开表层套管入泥深度增加,地层可钻性降低,φ660.4 mm牙轮钻头钻井存在机械钻速低、牙轮钻头耐久性差等挑战,亟需设计专用PDC喷射钻头进行深水表层喷射钻井。在分析?444.5 mm PDC钻头喷射φ914.4 mm表层导管技术优势基础上,针...深水钻井二开表层套管入泥深度增加,地层可钻性降低,φ660.4 mm牙轮钻头钻井存在机械钻速低、牙轮钻头耐久性差等挑战,亟需设计专用PDC喷射钻头进行深水表层喷射钻井。在分析?444.5 mm PDC钻头喷射φ914.4 mm表层导管技术优势基础上,针对PDC喷射作业风险、作业难点,通过钻头选型与改进、喷射水力优化、钻具优化、井身结构优化等措施构建了深水表层PDC钻头喷射钻井技术,并在南海流花、白云、荔湾等区块6口深水井取得成功应用。应用效果表明,深水表层PDC钻头喷射钻井表层二开机械钻速较常规牙轮钻头可提升2倍,可为深水表层钻井作业提供参考。展开更多
文摘In mould design, it is necessary for a designer to ensure that the cylinder has enough intensity in both the prestressed and synthesis states. An individual layer cylindrical mould cannot withstand a very high pressure needed in polycrystalline diamond composite (PDC) production. So, multi-layer prepressure combination assemble moulds are often used. The analysis conducted here is to study the interaction of cylindrical layers and to explain how to obtain enough load capability with the lowest requirement of material performance. The ratio of the pressure cylinder radius of synthetic diamond is 3.27, which is close to the optimal value and can be used as structure size in a design for PDC bit compact die. There is a linear relationship between the internal and external pressures under a special tangent stress on the inner wall of the pressure cylinder. So, when two of the three parameters (the internal pressure, external pressure, and the requirement value of the tangent stress on the inner wall of the pressure cylinder) are given, the third can be obtained. The sleeve acts as a bridge?between the pressure cylinder and the steel belts. The optimum model developed in this paper can be used in PDC bit compact die design and other similar prestressed cold extrusion die design.
文摘深水钻井二开表层套管入泥深度增加,地层可钻性降低,φ660.4 mm牙轮钻头钻井存在机械钻速低、牙轮钻头耐久性差等挑战,亟需设计专用PDC喷射钻头进行深水表层喷射钻井。在分析?444.5 mm PDC钻头喷射φ914.4 mm表层导管技术优势基础上,针对PDC喷射作业风险、作业难点,通过钻头选型与改进、喷射水力优化、钻具优化、井身结构优化等措施构建了深水表层PDC钻头喷射钻井技术,并在南海流花、白云、荔湾等区块6口深水井取得成功应用。应用效果表明,深水表层PDC钻头喷射钻井表层二开机械钻速较常规牙轮钻头可提升2倍,可为深水表层钻井作业提供参考。
