Effect of drying cracks on swelling and self-healing of bentonite-sand blocks used as engineered barriers for radioactive waste disposal

Experiments were conducted to evaluate the healing of drying cracks in air-dried bentonite-sand blocks after hydration and swelling in groundwater,providing justifications to simplify the protection of blocks prior to installation in a high-level radioactive waste repository.Synthetic groundwater was prepared to represent the geochemistry of Beishan groundwater,and was used to hydrate the blocks during the swelling pressure and swelling strain measurements,as Beishan is the most promising site for China's repository.Healing of the surface cracks was recorded by photography,and healing of the internal cracks was visualized by CT images and hydraulic conductivity of air-dried blocks.The results indicate that the maximum swelling pressure and swelling strain are primarily affected by the geochemistry of Beishan groundwater,but not affected by the drying cracks.The maximum swelling pressure and swelling strain of air-dried blocks are comparable to or even higher than the pressure and strain of fresh blocks.The maximum swelling pressure measured in strong(i.e.high ion strength)Beishan groundwater was 44%of the pressure measured in deionized(DI)water,and the maximum swelling strain was reduced to 23%of the strain measured in DI water.Nevertheless,the remained swelling of the blocks hydrated in strong Beishan groundwater was sufficient to heal the surface and internal drying cracks,as demonstrated by the pictures of surface cracks and CT images.The hydraulic conductivity of the air-dried block permeated with strong groundwater was comparable(3.7×higher)to the hydraulic conductivity of the fresh block,indicating the self-healing of drying cracks after hydration and swelling in groundwater.A simplified method of protecting the block with plastic wraps before installation is recommended,since the remained swelling of the block hydrated in Beishan groundwater is sufficient to heal the drying cracks.

The Beishan underground research laboratory for geological disposal of high-level radioactive waste in China:Planning, site selection,site characterization and in situ tests

With the rapid development of nuclear power in China, the disposal of high-level radioactive waste（HLW） has become an important issue for nuclear safety and environmental protection. Deep geological disposal is internationally accepted as a feasible and safe way to dispose of HLW, and underground research laboratories（URLs） play an important and multi-faceted role in the development of HLW repositories. This paper introduces the overall planning and the latest progress for China＇s URL. On the basis of the proposed strategy to build an area-specific URL in combination with a comprehensive evaluation of the site selection results obtained during the last 33 years, the Xinchang site in the Beishan area,located in Gansu Province of northwestern China, has been selected as the final site for China＇s first URL built in granite. In the process of characterizing the Xinchang URL site, a series of investigations,including borehole drilling,geological mapping, geophysical surveying,hydraulic testing and in situ stress measurements, has been conducted. The investigation results indicate that the geological,hydrogeological, engineering geological and geochemical conditions of the Xinchang site are very suitable for URL construction. Meanwhile, to validate and develop construction technologies for the Beishan URL, the Beishan exploration tunnel（BET）, which is a 50-m-deep facility in the Jiujing sub-area, has been constructed and several in situ tests, such as drill-and-blast tests, characterization of the excavation damaged zone（EDZ）, and long-term deformation monitoring of surrounding rocks, have been performed in the BET. The methodologies and technologies established in the BET will serve for URL construction.According to the achievements of the characterization of the URL site, a preliminary design of the URL with a maximum depth of 560 m is proposed and necessary in situ tests in the URL are planned.

High-level radioactive waste disposal in China: update 2010

For geological disposal of high-level radioactive waste （HLW）, the Chinese policy is that the spent nuclear fuel （SNF） should be reprocessed first, followed by vitrification and final disposal. The preliminary repository concept is a shaft-tunnel model, located in saturated zones in granite, while the final waste form for disposal is vitrified high-level radioactive waste. In 2006, the government published a long-term research and development （R＆D） plan for geological disposal of high-level radioactive waste. The program consists of three steps： （1） laboratory studies and site selection for a HLW repository （2006-2020）; （2） underground in-situ tests （2021-2040）; and （3） repository construction （2041-2050） followed by operation. With the support of China Atomic Energy Authority, comprehensive studies are underway and some progresses are made. The site characterization, including deep borehole drilling, has been performed at the most potential Beishan site in Gansu Province, Northwestern China. The data from geological and hydrogeological investigations, in-situ stress and permeability measurements of rock mass are presented in this paper. Engineered barrier studies are concentrated on the Gaomiaozi bentonite. A mock-up facility, which is used to study the thermo-hydro-mechano-chemical （THMC） properties of the bentonite, is under construction. Several projects on mechanical properties of Beishan granite are also underway. The key scientific challenges faced with HLW disposal are also discussed.

Design and development of large-scale in-situ PRACLAY heater test and horizontal high-level radioactive waste disposal gallery seal test in Belgian HADES

In Belgium,the Boom clay was selected as a potential host formation for the disposal of high-level radioactive waste（HLW）.To demonstrate the suitability of Boom clay for bearing thermal load induced by the HLW,a large-scale in-situ heater test,called PRACLAY heater test,will be conducted in the underground research laboratory（URL） in Mol.Owing to the limitations of the test（a short period of time compared with that considered in a real repository,different boundary conditions,etc.）,the test is designed to simulate,in a conservative way,the most critical state and phenomena that could occur in the host rock.The PRACLAY gallery was excavated at the end of 2007;the heating phase will begin in 2010 and will last for at least 10 years.The PRACLAY gallery itself leaves an opportunity to study the possibilities of sealing a disposal drift in Boom clay and testing the feasibility of hydraulic cut-off of any preferential pathway to the main access gallery through the excavation damage zone（EDZ） and the lining with a seal in a horizontal drift（horizontal seal）.Indeed,this is a generic problem for all deep geological disposal facilities for HLW.An annular seal made of compacted swelling bentonite will be installed in the front of the heated part of the PRACLAY gallery for these purposes.This paper provides detailed considerations on the thermo-hydro-mechanical（THM） boundary conditions for the design of the PRACLAY heater test and the seal test with the support of numerical calculations.It is believed that these important items considered in the PRACLAY heater test design also constitute key issues for the repository design.The outcome of the PRACLAY heater test will be an important milestone for the Belgian repository design.

Main outcomes from in situ thermo-hydro-mechanical experiments programme to demonstrate feasibility of radioactive high-level waste disposal in the Callovo-Oxfordian claystone

In the context of radioactive waste disposal,an underground research laboratory(URL)is a facility in which experiments are conducted to demonstrate the feasibility of constructing and operating a radioactive waste disposal facility within a geological formation.The Meuse/Haute-Marne URL is a sitespecific facility planned to study the feasibility of a radioactive waste disposal in the Callovo-Oxfordian(COx)claystone.The thermo-hydro-mechanical(THM)behaviour of the host rock is significant for the design of the underground nuclear waste disposal facility and for its long-term safety.The French National Radioactive Waste Management Agency(Andra)has begun a research programme aiming to demonstrate the relevancy of the French high-level waste(HLW)concept.This paper presents the programme implemented from small-scale(small diameter)boreholes to full-scale demonstration experiments to study the THM effects of the thermal transient on the COx claystone and the strategy implemented in this new programme to demonstrate and optimise current disposal facility components for HLW.It shows that the French high-level waste concept is feasible and working in the COx claystone.It also exhibits that,as for other plastic clay or claystone,heating-induced pore pressure increases and that the THM behaviour is anisotropic.

Experimental study on the physico-mechanical properties of Tamusu mudstone — A potential host rock for high-level radioactive waste in Inner Mongolia of China

Tamusu mudstone, located in Bayin Gobi Basin in Inner Mongolia of China, has been selected as a potential host rock for high-level radioactive waste(HLW) disposal in China. A series of tests has been carried out, including X-ray diffraction(XRD) tests, scanning electron microscopy(SEM) tests, disintegration tests, permeability tests and triaxial compression tests, to estimate the physico-mechanical properties of Tamusu mudstone in this work. The mineral composition of Tamusu mudstone was analyzed and it was considered as a stable rock due to its low disintegration rate, i.e. approximately 0.11%after several wet/dry cycles. Based on the results of permeability test, it was found that Tamusu mudstone has a low permeability, with the magnitude of about 10—20m^(2). The low permeability makes the mudstone well prevent nuclide migration and diffusion, and might be influenced by temperature.The triaxial tests show that Tamusu mudstone is a stiff mudstone with high compressive strength, which means that the excavation disturbed zone would be smaller compared to other types of mudstone due to construction and operation of HLW repositories. Finally, the properties of Tamusu mudstone were compared with those of Opalinus clay, Callovo-Oxfordian(COx) argillite, and Boom clay to further discuss the possibility of using Tamusu mudstone as a potential nuclear waste disposal medium.

On area-specific underground research laboratory for geological disposal of high-level radioactive waste in China

Underground research laboratories （URLs）, including ＂generic URLs＂ and ＂site-specific URLs＂, are un- derground facilities in which characterisation, testing, technology development, and/or demonstration activities are carried out in support of the development of geological repositories for high-level radioactive waste （HLW） disposal. In addition to the generic URL and site-specific URL, a concept of ＂areaspecific URL＂, or the third type of URL, is proposed in this paper. It is referred to as the facility that is built at a site within an area that is considered as a potential area for HLW repository or built at a place near the future repository site, and may be regarded as a precursor to the development of a repository at the site. It acts as a ＂generic URL＂, but also acts as a ＂site-specific URL＂ to some extent. Considering the current situation in China, the most suitable option is to build an ＂area-specific URL＂ in Beishan area, the first priority region for China＇s high-level waste repository. With this strategy, the goal to build China＇s URL by 2020 mav be achieved, but the time left is limited.

Study on the residence time of deep groundwater for high-level radioactive waste geological disposal

Residence time of deep groundwater is one of the most important parameters in safety and performance assessment for high-level radioactive waste geological disposal. In this study, we collected the deep groundwater samples of Jijicao in Gansu Beishan pre-selected region. The deep groundwater residence time at two depths estimated by Helium-4 accumulation method were 3.8 ka and 5.0 ka respectively upon measurement and calculation, which indicates that the deep groundwater is not derived from the deep crust circulation process. Hence, deep groundwater is featured with long residence time as well as slow circulation and update rate, and such features are conductive to the safe disposal of high-level radioactive waste.

Numerical analysis of thermal process in the near field around vertical disposal of high-level radioactive waste

For deep geological disposal of high-level radioactive waste(HLW)in granite,the temperature on the HLW canisters is commonly designed to be lower than100fiC.This criterion dictates the dimension of the repository.Based on the concept of HLW disposal in vertical boreholes,thermal process in the nearfield(host rock and buffer)surrounding HLW canisters has been simulated by using different methods.The results are drawn as follows:(a)the initial heat power of HLW canisters is the most important and sensitive parameter for evolution of temperaturefield;(b)the thermal properties and variations of the host rock,the engineered buffer,and possible gaps between canister and buffer and host rock are the additional key factors governing the heat transformation;(c)the gaps width and thefilling by water or air determine the temperature offsets between them.

Clays in radioactive waste disposal

Clays and argillites are considered in some countries as possible host rocks for nuclear waste disposal at great depth.The use of compacted swelling clays as engineered barriers is also considered within the framework of the multi-barrier concept.In relation to these concepts,various research programs have been conducted to assess the thermo-hydro-mechanical properties of radioactive waste disposal at great depth.After introducing the concepts of waste isolation developed in Belgium,France and Switzerland,the paper describes the retention and transfer properties of engineered barriers made up of compacted swelling clays in relation to microstructure features.Some features of the thermo-mechanical behaviors of three possible geological barriers,namely Boom clay（Belgium）,Callovo-Oxfordian clay（France） and Opalinus clay（Switzerland）,are then described,including the retention and transfer properties,volume change behavior,shear strength and thermal aspects.

Clearing of the Radioactive Liquid Waste from Oils and Oil Products by UV-Radiation at NPPs

The basic methods of concentration and purification of liquid radioactive waste on the nuclear power plant are distillation and ionic exchange. During vaporization of oil waste products and the fulfilled washing solutions the part of oil passes into a condensate. Clearing of such condensate on ion-exchanged filters results to oiling of ion-exchanged materials and to decrease number of filter cycles. Due to the often regeneration of ion-exchanged filters additional volumes of waste products as the fulfilled reclaiming solutions, washing and loosening waters are formed. The attention of scientists was involved with methods of clearing of water environments from the organic substances, based on deep oxidizing transformations of hydrocarbons into carbonic gas and water. From processes of oxidation of hydrocarbons up to CO2 and H2O, sold at moderate conditions, our attention has involved photochemical oxidation with the help of UV-radiation.

High-Level Nuclear Wastes and the Environment: Analyses of Challenges and Engineering Strategies

The main objective of this paper is to analyze the current status of high-level nuclear waste disposal along with presentation of practical perspectives about the environmental issues involved. Present disposal designs and concepts are analyzed on a scientific basis and modifications to existing designs are proposed from the perspective of environmental safety. A new concept of a chemical heat sink is introduced for the removal of heat emitted due to radioactive decay in the spent nuclear fuel or high-level radioactive waste, and thermal spikes produced by radiation in containment materials. Mainly, UO2 and metallic U are used as fuels in nuclear reactors. Spent nuclear fuel contains fission products and transuranium elements which would remain radioactive for 104 to 108years. Essential concepts and engineering strategies for spent nuclear fuel disposal are described. Conceptual designs are described and discussed considering the long-term radiation and thermal activity of spent nuclear fuel. Notions of physical and chemical barriers to contain nuclear waste are highlighted. A timeframe for nuclear waste disposal is proposed and time-line nuclear waste disposal plan or policy is described and discussed.

Disposal of high-level radioactive waste in crystalline rock: On coupled processes and site development

Safe disposal of high-level radioactive nuclear waste(HLW)is crucial for human health and the environment,as well as for sustainable development.Deep geological disposal in sparsely fractured crystalline rock is considered one of the most favorable methods for final disposal of HLW.Extensive research has been conducted worldwide and many countries have initiated their own national development programs for deep geological disposal.Significant advancements of national programs for deep geological disposal of HLW in crystalline rock have been achieved in Sweden and Finland,which are currently under site development stage,focusing on detailed site characterization,repository construction,and post-closure safety analysis.Continued research and development remain important in the site development stage to ensure long-term safety of the HLW disposal repository.This work presents an overview and discussion of the progress as well as remaining open scientific issues and possibilities related to site development for safe disposal of HLW in crystalline rock.We emphasize that developing a comprehensive and convergent understanding of the coupled thermal,hydraulic,mechanical,chemical and biological(THMCB)processes in fractured crystalline rock remains the most important yet challenging topic for future studies towards safe disposal of HLW in crystalline rock.Advancements in laboratory facilities/techniques and computational models,as well as available comprehensive field data from site developments,provide new opportunities to enhance our understanding of the coupled processes and thereby repository design for safe geological disposal of HLW in crystalline rock.

Theoretical Determination and Experimental Verification of Transport Index of Rectangular Shaped Radioactive Containers

Ionizing radiations are widely used to sustain and enhance our quality of life in the areas such as medical diagnosis, therapy, scientific research and industry etc. Ionizing radiations are available from radioactive sources which are made of radioactive materials. The radioactive materials are produced in either nuclear power or research reactors or nuclear accelerators or extracted from the naturally found radioactive ores. These radioactive sources and radioactive materials need to be transported from their places of production to the places of applications and finally to waste repositories. The radioactive materials are transported in well designed packages having various shapes and sizes. In the field of radioactive transport, it is a mandatory to find the Transport Index (TI) to be mentioned on each package for transportation. This research is focused on the determination of the maximum γ-ray radiation dose at one meter from the surface of cubic and rectangular shaped package or containers. A computer code “Solid Angle for Transport Index” (SAFTI) has been developed using MATLAB to determine the location of maximum value of the radiation dose rate from the surface of a rectangular or square container. This maximum dose rate is used to determine the transport index. Some of the results of the code have been compared with the experimental results. The results of this research are useful not only to determine TI for individual packages but also to find the TI of the vehicles carrying the transport packages.

核废水处理的现状与探索

正确安全处理核废物是全球关注的焦点,本文针对核废物中的废水产生、处理和排放问题等过程进行了总结,重点梳理了对环境产生重要影响的中低放核废水中的常见放射性元素、半衰期以及处理流程。最后,对核废水大量排入海洋的过程、各种放射性核素排入海洋对环境的危害开展了系统的研究,对核事故废水的排放可能产生的放射性元素及其对环境的影响提出了一些看法。

核电厂便携式低放废水在线监测设备关键技术探讨

结合核电厂的实际情况和需求,梳理了低放废水的特点,明确了其对便携式在线监测设备的技术要求,其中最关键是能同时满足低探测下限(MDAC≤8 Bq/L)和便携性(设备总重≤50 kg)的限制。讨论了测量方式、探测器选型和校准方式等在线监测设备的关键技术,对低放废水进行了放射性在线监测,测量方式选择取样式,探测器选择大体积NaI晶体,校准方式选择代表点法。调研了低放废水在线监测设备的研究现状,现有的在线监测设备重量都在200 kg以上,与核电厂的要求之间存在较大的差距,有必要开展同时具备低探测下限和优异便携性的新型在线监测设备的研制。对新型探测器的应用、结构和新型测量方式的发展这三个研究方向给出了建议。最后,从提高探测效率的角度,提出了一种基于环形NaI晶体的新型探测器结构,初步论证了其探测下限和设备总重指标有望满足核电厂的要求。

我国核电运行与退役产生放射性废物回顾与发展

本文在统计分析国内现有核电放射性废物数据的基础上,结合国外情况,分析估算了近远期我国核电运行和退役产生的放射性废物总量、放射性水平及废物类型等,提出了核电放射性废物管理的相关建议,为核电放射性废物管理提供参考。

Corrosion techniques and strategies for used fuel containers with copper corrosion barriers under deep geological disposal conditions:A review

Safe emplacement of high-level nuclear waste(HLNW)arising from the utilization of nuclear power is a frequently en-countered and considerably challenging issue.The widely accepted and feasible approach for the permanent disposal of HLNW involves housing it in a corrosion-resistant container and subsequently burying it deep in a geologic repository.The focus lies on ensuring the dur-ability and integrity of the container in this process.This review introduces various techniques and strategies employed in controlling the corrosion of used fuel containers(UFCs)using copper(Cu)as corrosion barrier in the context of deep geological disposal.Overall,these corrosion prevention techniques and methods have been effectively implemented and employed to successfully mitigate the corrosion challenges encountered during the permanent disposal of Cu containers(e.g.,corrosion mechanisms and corrosion parameters)in deep geologic repositories.The primary objective of this review is to provide an extensive examination of the alteration in the corrosion envir-onment encountered by the UFCs when subjected to deep geologic repository conditions and focusing on addressing the potential corro-sion scenarios.

核燃料后处理放射性废物管理处置策略

随着核能在全球能源结构中的地位日益重要,核燃料后处理工艺产生的放射性废物管理与处置问题受到广泛关注。文章介绍了国外先进核燃料后处理废物管理处置策略,分析了中国当前存在的处置问题和不足,从低放废物近地表处置、中放废物中等深度处置、高放废物深地质处置、数字化和智能化应用、开展专业化法律和标准体系研究五个方面提出相应管理处置策略。

核电站放射性废物的治理探讨

在技术进步过程中,能源领域发生了多次变革,陆续出现了很多新技术,特别是核能发电,在全球范围内广受关注。虽然目前核电技术越来越成熟,但是核电站运行中的废物处理一直是重点和难点工作。核电站中的放射性废物总量庞大、种类繁多,如果未进行专业化处理,就会给人类社会带来较大威胁。当前及未来,各核电站都需重视放射性废物的治理工作,不断引进全新的治理技术。基于此,本文从核电站的常见废物着手,着重分析了放射性废物的治理技术,以期指导实际工作。