Automatic Control of Automobile Transmission Performance Test Stand

To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.

Adaptive Clutch Engaging Process Control for Automatic Mechanical Transmission

Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forward. It considers both jerk and slipping work which are the most commonly used quality evaluating indexes of vehicle starting phase. The adaptive control system and its reference model are discussed profoundly. Taking the adaptability to different starting gears and different road conditions as examples, some proving field test records are shown to illustrate the main clutch adaptive control strategy at starting phase. Proving field test gives acceptable results.

FOUR-PARAMETER AUTOMATIC TRANSMISSION TECHNOLOGY FOR CONSTRUCTION VEHICLE BASED ON ELMAN RECURSIVE NEURAL NETWORK

From the viewpoint of energy saving and improving transmission efficiency, the ZL50E wheel loader is taken as the study object. And the system model is analyzed based on the transmission system of the construction vehicle. A new four-parameter shift schedule is presented, which can keep the torque converter working in the high efficiency area. The control algorithm based on the Elman recursive neural network is applied, and four-parameter control system is developed which is based on industrial computer. The system is used to collect data accurately and control 4D180 power-shift gearbox of ZL50E wheel loader shift timely. An experiment is done on automatic transmission test-bed, and the result indicates that the control system could reliably and safely work and improve the efficiency of hydraulic torque converter. Four-parameter shift strategy that takes into account the power consuming of the working pump has important operating significance and reflects the actual working status of construction vehicle.

Design and dynamic simulation of hydraulic system of a new automatic transmission

A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic system of AT was established by ITI-SimulationX. Simulation results and theoretical design results were compared to confirm the simulation model. Based on the confirmed simulation model, the simulation results of pressure and flow of the hydraulic system were analyzed. The dynamic simulation method is very helpful for designing and analyzing the performance of hydraulic system and further optimization design. The theoretical design method and dynamic simulation model are feasible for the real industrial applications. The research results can be used in hydraulic system design and optimization.

Study on shift schedule saving energy of automatic transmission of ground vehicles

To improve ground vehicle efficiency, shift schedule energy saving was proposed for the ground vehicle automatic transmission by studying the function of the torque converter and transmission in the vehicular drivetrain. The shift schedule can keep the torque converter working in the high efficiency range under all the working conditions except in the low efficiency range on the left when the transmission worked at the lowest shift, and in the low efficiency range on the right when the transmission worked at the highest shift. The shift quality key factors were analysed. The automatic trans-mission's bench-test adopting this shift schedule was made on the automatic transmission's test-bed. The experimental results showed that the shift schedule was correct and that the shift quality was controllable.

STUDY ON SHIFT SCHEDULE AND SIMULATION OF AUTOMATIC TRANSMISSION

From the point of view of saving energy, a new shift schedule and auto-controlling strategy for automatic transmission are proposed. In order to verify this shift schedule, a simulation program using a software package of Matlab/ Simulink is developed. The simulation results show the shift schedule is correct. This shift schedule has enriched the theory of vehicle automatic maneuvering and will improve the efficiency of hydrodynanic drive system of the vehicle.

STUDY ON SHIFT SCHEDULE OF AUTOMATIC TRANSMISSION TO IMPROVE ENGINEERING VEHICULAR EFFICIENCY

New shift schedule for automatic transmission is proposed from the point ofview of saving energy. The bench-test of automatic shift adopting this shift schedule is done onautomatic transmission's test-bed. The experimental results show the shift schedule is correct. Thisshift schedule has enriched the theory of vehicle automatic maneuvering and will improve theefficiency of hydrodynamic drive system of the vehicle.

Application of clutch to clutch gear shift technology for a new automatic transmission

For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Aiming at four different shift types,the ideal characteristics of shift clutch and engine control were set up.By using torque estimation method,PI slip control algorithm and engine coordinated control principle,the control model and transmission controller were well developed for three shift phases which included rapid-fill phase,torque phase and inertia phase.The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy.The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained.The development proposal and algorithm have a high value for engineering application.

Optimal tracking control for automatic transmission shift process

In order to improve the shift quality, a linear quadratic optimal tracking control algorithm for automatic transmission shift process is proposed. The dynamic equations of the shift process are derived using a Lagrange method. And a powertrain model is built in the Matlab/Simulink and veri- fied by the measurements. Considering the shift jerk and friction loss during the shift process, the tracking trajectories of the turbine speed and output shaft speed are defined. Furthermore, the linear quadratic optimal tracking control performance index is proposed. Based on the Pontryagin＇ s mini- mum principle, the optimal control law of the shift process is presented. Finally, the simulation study of the 1 - 2 upshift process under different load conditions is carried out with the powertrain model. The simulation results demonstrate that the shift jerk and friction loss can be significantly re- duced by applying the proposed optimal tracking control method.

OPTIMAL TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLE WITH AUTOMATIC MECHANICAL TRANSMISSION

In parallel hybrid electrical vehicle （PHEV） equipped with automatic mechanical transmission （AMT）, the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gearshift and clutch operation. To improve these performance indexes of PHEV, a coordinated control system is proposed through the analyzing of HEV powertrain dynamic characteristics. Using the method of minimum principle, the input torque of transmission is optimized to improve the driving smoothness of vehicle. Using the methods of fuzzy logic and fuzzy-PID, the engaging speed of clutch and the throttle opening of engine are manipulated to ensure the smoothness of clutch engagement and reduce the abrasion of clutch friction plates. The motor provides the difference between the required input torque of transmission and the torque transmitted through clutch plates. Results of simulation and experiments show that the proposed control strategy performs better than the contrastive control system, the smoothness of driving and the abrasion of clutch can be improved simultaneously.

Desktop calibration of automatic transmission for passenger vehicle

Desktop calibration of automatic transmission(AT) is a method which can reduce cost, enhance efficiency and shorten the development periods of a vehicle effectively. We primary introduced the principle and approach of desktop calibration of AT based on the condition of coupling characteristics between engine and torque converter and obtained right point exactly. It is shown to agree with experimental measurements reasonably well. It was used in different applications abroad based on AT technology and achieved a good performance of the vehicle compared with traditional AT technology which primary focuses on the drivability, performance and fuel consumption.

Defect Analysis and Innovation Design of Synchronizer for Clutchless Automatic Mechanical Transmission

The synchronizer is a key component of automatic mechanical transmission(AMT)equipped in electric vehicles,but the inertial lock-ring synchronizer(ILRS)commonly used there is not suitable especially for pure electric vehicles without a clutch because of big shift impact.To make the shifting process rapid and smooth,a new synchronizer named pressure-controllable friction ring synchronizer(PCFRS)was designed.Initially,the inevitable shortcoming of ILRS was verified by simulation and test.Furthermore,the mechanical characteristics and advantages of the new synchronizer over ILRS were analyzed.Then,the formulations describing the dynamic transmission based on the working mechanism of the PCFRS were established.Finally,the shifting simulation results with PCFRS and ILRS based on the same operating conditions were compared and analyzed.The research shows that the PCFRS can meet the main shifting evaluation index of an AMT without complex control methods,as well as it takes only 0.2406 s to finish the comfortable and zero-speed-difference shifting.The shifting quality of PCFRS is better than that of the ILRS.It lays a foundation for using the new synchronizer as a part of clutchless AMTs equipped in pure electric vehicles.

Design and application of electric oil pump in automatic transmission for efficiency improvement and start–stop function

For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmission power loss and the hydraulic system leakage. Based on this model, a flow-based control strategy is developed for EOP to satisfy the system flow requirement. This control strategy is verified through the forward driving simulation. The results indicate that there is a best combination for the size of mechanical oil pump(MOP) and EOP in terms of minimum energy consumption. In order to get a quick and smooth starting process, control strategies of the EOP and the on-coming clutch are proposed. The test environment on a prototype vehicle is built to verify the feasibility of the integrated EOP and its control strategies. The results show that the selected EOP can satisfy the flow requirement and a quick and smooth starting performance is achieved in the start–stop function. This research has a high value for the forward design of EOP in automatic transmissions with respect to efficiency improvement and start–stop function.

Research on Fuzzy Control for Automatic Transmission of Tracked Vehicles

A principle of fuzzy control for tracked vehicles is proposed to make its automatic transmission system be able to adapt complex running conditions, and a model of its power train is established to be used in simulation. Based on the fuzzy control method, a fuzzy shift control system composed of a basic shift strategy and a fuzzy modification module is developed to improve the dynamic characteristics and cross-country maneuverability. Simulation results show that the fuzzy shift strategy can improve the shift quality under manifold driving conditions and avoid cycled shift effectively.Therefore, the proposed fuzzy shift strategies are proved to be feasible and practicable.

Dynamic Engaging Characteristics of Wet Clutch in Automatic Transmission

Wet clutch is an important shifting component in automatic transmission,and its properties will affect the gear shift performance. By comparing the calculated and test results,the static friction torque model was proved to be capable of describing the real pressure and torque only in the situation of high-energy engagement.Therefore,a dynamic torque model was proposed on basis of hydrodynamic properties between friction surfaces, in which the clutch engagement was divided into three phases for hydrodynamic lubrication, mixed lubrication, and mechanical contact. The proposed dynamic torque model was validated by comparing the calculated and test results. The effects of temperature,pressure,and pressure changing rate of automatic transmission fluid( ATF) on the clutch torque were analyzed. Based on these results,the clutchto-clutch torque control during shifting in automatic transmission was optimized,and as a result,the shifting comfort was significantly improved since the problems such as the fluctuation and sudden drop of the engine rotating speed during shifting were eliminated.

Tailor-Made PAMA VII to Optimize Automatic Transmission Fluid Rheological Requirements

There are three predominant aspects of the rheological requirements: maximum possible high temperature thickening,minimum possible low-temperature thickening,and high shear stability for automatic transmission fluids.High temperature thickening by VI improvers is largely a function of molecular size and high solubility to give extended polymer coil size.On the other hand,the desirable characteristic of minimum low-temperature thickening is a function of somewhat the opposite characteristic;namely relatively poor solubility leading to minimal polymer coil size and thus low viscosity contribution.In addition to not thickening fluids at cold temperatures VI improvers should also provide control of wax-gelation which,if unfettered,can lead to congealed fluids.Finally the third property of high shear stability is in direct conflict with the desirable characteristic of large molecular size for effective high temperature thickening.In this paper we shall attempt to sort out these conflicting properties and provide some insight into how we approach design of VI improvers for the highly demanding world of automatic transmission fluid rheology.

Configuration Synthesis and Performance Analysis of 9‑Speed Automatic Transmissions

Current research of automatic transmission(AT)mainly focuses on the improvement of driving performance,and configuration innovation is one of the main research directions.However,finding new configurations of ATs is one of the main limitations of configuration innovation.In the present study,epicyclic gear trains(EGTs)are applied to investigate mechanisms of 9-speed ATs.Then four kinematic configurations are proposed for automatic transitions.In order to evaluate the performance of proposed mechanisms,the lever analogy method is applied to conduct kinematic and mechanical analyses.The power flow analysis is conducted,and then transmission efficiencies are calculated based on the torque method.The comparative analysis between the proposed and existing mechanisms is carried out where obtained results show that proposed mechanisms have reasonable performance and can be used in ATs.The prototype of an AT is manufactured and the speed test is conducted,which proves the accuracy of analysis and the feasibility of proposed mechanisms.

Hydraulic and thermal analysis of automatic transmission fluid in the presence of nano-particles and twisted tape:An experimental and numerical study

In the present study,hydraulic and thermal behavior of an automatic transmission nano-fluid(ATNF) inside a tube with a twisted tape has been investigated.The heat transfer improvement and pressure drop of transmission oil for each of case of using twisted tape and nano-particles were also examined separately and compared with each other.The Cu O nano-particles were used to prepare the ATNF.The effects of different Reynolds numbers and different mass fractions of nano-particle were investigated.The results showed that applying nano-particles and twisted tape simultaneously increases both the pressure drop and Nusselt number,on average by about 53% and 76%,respectively.By using a parameter,namely thermal performance index η,the effect of increasing heat transfer and pressure drop was studied simultaneously.The heat transfer improvement predominates the pressure drop increment in all cases.It was observed that the highest thermal performance of 1.9 was obtained at Re=634 and Φ=2%.Furthermore,regarding the increment of the Nu number,it was shown that the use of twisted tapes individually could increase the average Nu number by 41%,while the max increment arising from individual use of 2% nano-particles is 13%,so using twisted tape is a more effective-technique for this case study.

Analysis on the gear-shifting schedule of hydraulic automatic transmission

With an advanced foreign hydraulic automatic transmission as the objective,an analytical method for the gear-shifting schedule is proposed.First the demanded maximum gradient of test is estimated.Then a test scheme and analytical procedure is formulated by initial test and hypothetical shift parameters.Finally through gear-shifting tests under different road conditions,load,accelerator pedal position limitation,throttle opening and output shaft speed are found to be the gear-shifting parameters.Under a common road condition,the gear-shifting schedule is a double-parameter schedule.Based on the driver＇s demands on braking and dynamic performance,different shift schedules are made under downhill,uphill and quick releasing acceleration pedal conditions.The operation criteria of down-shift schedule on abrupt grade are proposed.

Investigation of Self Excited Torsional Vibrations of Different Configurations of Automatic Transmission Systems during Engagement

The vehicle drive line system is subjected to torsional vibration from different sources of the system such as;engine fluctuating torque, Hook’s joint and the final drive. However, the essential source is the friction torque induced in the friction elements, during their engagement. In the automatic transmission system, the planetary gear set includes several friction elements such as;clutch, band brakes, and one way clutch. During the engagement, severe torsional vibration is induced by friction which is noticeable by the passengers in the form of what so called vehicle shunt. In present paper, a torsional vibration model for Drive Line (DL) system includes three different configurations of automatic transmission is constructed. A computer program using MATLAB subroutines is implemented to obtain the system response. Effect of system parameters on the dynamic behavior and stability has been investigated. The system damping and the trend of the friction coefficient have an essential effect on the dynamic behavior and stability of the system. The system response is now predictable with change of the system parameters which opens up the opportunity in future to control the vibration level.