Improving the performance of crystalline Si solar cell by high-pressure hydrogenation

We report an approach of high-pressure hydrogenation to improve the performance of crystalline Si(c-Si) solar cells.As-received p-type c-Si wafer-based PN junctions were subjected to high-pressure(2.5 MPa) hydrogen atmosphere at 200 ℃,followed by evaporating antireflection layers,passivation layers,and front and rear electrodes.The efficiency of the so prepared c-Si solar cell was found to increase evidently after high-pressure hydrogenation,with a maximal enhancement of 10%.The incorporation of hydrogen by Si solar cells was identified,and hydrogen passivation of dangling bonds in Si was confirmed.Compared to the regular approach of hydrogen plasma passivation,the approach of high-pressure hydrogenation reported here needs no post-hydrogenation treatment,and can be more convenient and efficient to use in improving the performances of the c-Si and other solar cells.

Pore size effects of nanoporous carbons with ultra-high surface area on high-pressure hydrogen storage

In this work, the morphologies and pore structures of a series of corncob-derived activated carbons and zeolite templated carbon with ultrahigh surface area were carefully investigated by SEM, HRTEM and N2-sorption characterization technologies. The high-pressure hydrogen uptake performance was analyzed using standard Pressure-Composition-Temperature apparatus in order to study the pore size effects on hydrogen uptake. These as-obtained porous carbons showed different characteristics of pore size distribution as well as specific surface area. The results indicate that the most effective pores for adsorbing hydrogen depended on the storage pressure. These ultramicropores （0.65-0.85 nm） could be the most effective pores on excess H2 uptake at 1 bar, however, micropores （0.85-2 nm） would play a more important role in excess H2 uptake at higher pressure at 77 K. At room temperature, pore size effects on H2 uptake capacity were very weak. Both specific surface area and total pore volume play more important roles than pore size for H2 uptake at room temperature, which was clearly different from that at 77 K. For applications in future, the corncob-derived activated carbons can be more available than zeolite templated carbons at 77 K. Element doping enhanced hydrogen uptake could be main research direction for improving H2 uptake capacity at room temperature.

Application of Big Data Technology in Evaluation of Operating Status of High-pressure Hydrogenation Heat Exchanger

The high-pressure hydrogenation heat exchanger is an impoltmlt equipment of the refinery, but it is exposed tothe problem of leakage caused by ammonium salt corrosion. Therefore, it is very important to evaluate the operating statusof flae hydrogenation heat exchanger. To improve flae method for evaluating the operating status of hydrogenation heat ex-chmagers by using flae traditional method, flais paper proposes a new method for evaluating the operation of hydrogenationheat exchangers based on big data. To address flae noisy data common in flae industry, this paper proposes an automatednoisy interval detection algorithm. To deal with flae problem that the sensor parameters have voluminous and mtrelateddimensions, flais paper proposes a key parameter detection algorithm based on flae Pearson correlation coefficient. Finally,this paper presents a system-based health scoring algorithm based on PCA （Principal Component Analysis） to assist site op-erators in assessing the healfla of hydrogenation heat exchangers. The evaluation of flae operating status of flae hydrorefiningheat exchange device based on big data technology will help the operators to more accurately grasp the status of flae indus-trial system mad have positive guiding significance for the early warning offlae failure.

Overview of hydrogen-resistant alloys for high-pressure hydrogen environment:on the hydrogen energy structural materials

With the progressive expansion of hydrogen fuel demand,hydrogen pipelines,hydrogen storage cylinders and hydrogen refuelling stations(HRSs)are the primary components of hydrogen energy systems that face high-pressure hydrogen environments.Hydrogen embrittlement(HE)is a typical phenomenon in metallic materials,particularly in the high-pressure hydrogen environment,that causes loss of ductility and potentially catastrophic failure.HE is associated with materials,the service environment and stress.The primary mechanisms for explaining the HE of materials are hydrogen-enhanced decohesion,hydrogen-induced phase transformation,hydrogen-enhanced local plasticity,adsorption-induced dislocation emission and hydrogen-enhanced strain-induced vacancy.To reduce the risk of HE for metallic structural materials used in hydrogen energy systems,it is crucial to reasonably select hydrogen-resistant materials for high-pressure hydrogen environments.This paper summarizes HE phenomena,mechanisms and current problems for the metallic structural materials of hydrogen energy systems.A research perspective is also proposed,mainly focusing on metal structural materials for hydrogen pipelines,hydrogen storage cylinders and hydrogen compressors in HRSs from an application perspective.

Nano-scale Reinforcements and Properties of Al-Si-Cu Alloy Processed by High-Pressure Torsion

To improve the comprehensive mechanical properties of Al-Si-Cu alloy,it was treated by a high-pressure torsion process,and the effect of the deformation degree on the microstructure and properties of the Al-Si-Cu alloy was studied.The results show that the reinforcements(β-Si andθ-CuAl_(2)phases)of the Al-Si-Cu alloy are dispersed in theα-Al matrix phase with finer phase size after the treatment.The processed samples exhibit grain sizes in the submicron or even nanometer range,which effectively improves the mechanical properties of the material.The hardness and strength of the deformed alloy are both significantly raised to 268 HV and 390.04 MPa by 10 turns HPT process,and the fracture morphology shows that the material gradually transits from brittle to plastic before and after deformation.The elements interdiffusion at the interface between the phases has also been effectively enhanced.In addition,it is found that the severe plastic deformation at room temperature induces a ternary eutectic reaction,resulting in the formation of ternary Al+Si+CuAl_(2)eutectic.

Experimental and Finite Element Analysis of Corroded High-Pressure Pipeline Repaired by Laminated Composite

Repairs of corroded high-pressure pipelines are essential for fluids transportation under high pressure.One of the methods used in their repairs is the use of layered composites.The composite used must have the necessary strength.Therefore,the experiments and analytical solutions presented in this paper are performed according to the relevant standards and codes,including ASME PCC-2,ASME B31.8S,ASME B31.4,ISO 24817 and ASME B31.G.In addition,the experimental tests are replicated numerically using the finite element method.Setting the strain gauges at different distances from the defect location,can reduce the nonlinear effects,deformation,and fluctuations due to the high pressure.The direct relationship between the depth of an axial defect and the stress concentration is observed at the inner side edges of the defect.Composite reparation reduces the non-linearities related to the sharp variation of the geometry and a more reliable numerical simulation could be performed.

Direct hydrogen quantification in high-pressure metal hydrides

compounds showing phonon mediated near room-temperature superconductivity.However,severe limitations in determining the chemical formula of the reaction products,especially with regards to their hydrogen content,impedes a deep understanding of the synthesized phases and can lead to significantly erroneous conclusions.Here,we present a way to directly access the hydrogen content of MH solids synthesized at high pressures in(laser-heated)diamond anvil cells using nuclear magnetic resonance spectroscopy.We show that this method can be used to investigate MH compounds with a wide range of hydrogen content,from MH_(x) with x=0.15(CuH_(0.15))to x■6.4(H_(6±0.4)S_(5)).

Seal contact performance analysis of soft seals on high-pressure hydrogen charge valves

The charge valve is an important element in the charging port of a high-pressure hydrogen storage cylinder(HP-HSC).It is normally closed after the HP-HSC is filled with hydrogen.If the seal of the charge valve is damaged,it will seriously affect the stable operation of the hydrogen supply system and may even cause safety problems.Therefore,the seal performance of the charge valve is important.In this paper,finite element analysis(FEA)is carried out to analyze the seal contact performance of hydrogenated nitrile rubber(HNBR)gaskets in the seal pair of a charge valve.The effects of different pre-compressions,seal widths,and hydrogen pressures on the seal contact performance of the charge valve are analyzed.The contact pressure on the seal surface increases with the increase of pre-compression.With a pre-compression of 2.5 mm,the maximum contact pressure without and with hydrogen pressure are 68.51 and 107.38 MPa,respectively.A contact gap appears in the inner ring of the seal surface with pre-compression below 0.15 mm.The contact gap occurs between the entire seal surface with a seal width of1 mm.The contact pressure on the seal surface and the width of the separation area between the seal surfaces increase with the increase of the seal width.The contact gap between the seal surfaces is zero with a width of 2.5 mm.The width of the separation area between the seal surfaces decreases with the decrease of the hydrogen pressure.The width of the separation area is reduced from 0.5 mm at 35 MPa to 0.17 mm at 15 MPa.This work can be useful for improvement of the seal performance and of the design of the charge valve used in the HP-HSC.

Numerical Simulation Analysis of the Transformer Fire Extinguishing Process with a High-Pressure Water Mist System under Different Conditions

To thoroughly study the extinguishing effect of a high-pressure water mist fire extinguishing system when a transformer fire occurs,a 3D experimental model of a transformer is established in this work by employing Fire Dynamics Simulator(FDS)software.More specifically,by setting different parameters,the process of the highpressure water mist fire extinguishing system with the presence of both diverse ambient temperatures and water mist sprinkler laying conditions is simulated.In addition,the fire extinguishing effect of the employed high-pressure water mist system with the implementation of different strategies is systematically analyzed.The extracted results show that a fire source farther away fromthe centerline leads to a lower local temperature distribution.In addition,as the ambient temperature increases,the temperature above the fire source decreases,while the temperature and the concentrationof theupperflue gas layer bothdecrease.Interestingly,after thehigh-pressurewatermist sprinkler begins to operate,both the temperature distribution above the fire source and the concentration of the flue gas decrease,which indicates that the high-pressure water mist system plays the role of cooling and dust removal.By comparing various sprinkler laying methods,it is found that the lower sprinkler height has a better effect on the temperature above the fire source,the temperature of the upper flue gas layer,and the concentration of the flue gas.Moreover,when the sprinkler is spread over thewhole transformer,the cooling effect on both the temperature above the fire source and the temperature of the upper flue gas layer is good,whereas the change in the concentration of the flue gas above the fire source is not obvious compared to the case where the sprinkler is not fully spread.

The discovery of TiO_(2)-Ⅱ,the α-PbO_(2)-structured high-pressure polymorph of rutile,in the Suizhou L6 chondrite

We report the discovery of TiO_(2)-Ⅱ in the unmelted rock of the shocked Suizhou L6 chondrite.Natural TiO_(2)-Ⅱ was previously found in ultrahigh-pressure metamorphic and mantle-derived rocks,terrestrial impact structures,and tektite.Our microscopic,Raman spectroscopic,electron microprobe and transmission electron microscopic investigations have revealed:(1) All observed TiO_(2)-Ⅱ grains are related with ilmenite and pyrophanite;(2) TiO_(2)-Ⅱ occurs as needle-and leaf-shaped inclusions in llmenite and patch-,tape-shaped body in pyrophanite;(3)The composition of TiO_(2)-Ⅱ is identical with that of its precursor rutile;(4) The Raman spectrum of TiO_(2)-Ⅱ is in good agreement with that of natural and synthesized α-PbO_(2)-type TiO_(2);(5) TiO_(2)-Ⅱ occurs mainly in the form of well-ordered nano-domains and small mis-orientation among the domains can be observed.(6) All electron diffraction reflections from TiO_(2)-Ⅱ can be indexed to α-PbO_(2)structure in space group Pbcn with lattice parameters of a=4.481 ?,b=5.578 A and c=4.921 A;(7) The exsolution inclusions of rutile from host ilmenite are mostly connected with an alternation process along the lamellar twinning plane of ilmenite induced by shockinduced high pressure and high temperature;(8) The P-T regime of 20-25 GPa and 1000 ℃ estimated for the Suizhou unmelted rock is suitable for phase transition of rutile into TiO_(2)-Ⅱ phase.

Laves phase hydrogen storage alloys for super-high-pressure metal hydride hydrogen compressors

Ti-Cr- and Ti-Mn-based alloys were prepared to be low- and high-pressure stage metals for a double-stage super-high-pressure metal hydride hydrogen compressor. Their crystallographic characteristics and hydrogen storage properties were investigated. The alloy pair Ti0.9Zr0.1Mn1.4- Cr0.35V0.2Fe0.05/TiCr1.55Mn0.2Fe0.2 was optimized based on the comprehensive performance of the studied alloys. The product hydrogen with a pressure of 100 MPa could be produced from 4 MPa feed gas when hot oil was used as a heat reservoir.

Integration of morphology and electronic structure modulation on cobalt phosphide nanosheets to boost photocatalytic hydrogen evolution from ammonia borane hydrolysis

The controllable and safe hydrogen storage technologies are widely recognized as the main bottleneck for the accomplishment of sustainable hydrogen energy.Ammonia borane(AB)has regarded as a competitive candidate for chemical hydrogen storage.However,developing efficient yet high-performance catalysts towards hydrogen evolution from AB hydrolysis remains an enormous challenge.Herein,cobalt phosphide nanosheets are synthesized by a facile salt-assisted along with low-temperature phosphidation strategy for simultaneously modulating its morphology and electronic structure,and function as hydrogen evolution photocatalysts.Impressively,the Co_(2)P nanosheets display extraordinary performance with a record high turnover frequency of 44.9 min^(-1),outperforming most of the noble-metal-free catalysts reported to date.This remarkable performance is attributed to its desired nanosheets structure,featuring with high specific surface area,abundant exposed active sites,and short charge diffusion paths.Our findings provide a novel strategy for regulating metal phosphides with desired phase structure and morphology for energy-related applications and beyond.

A new transition metal diphosphideα-MoP_(2) synthesized by a high-temperature and high-pressure technique

Monoclinicα-MoP_(2),with the OsGe2-type structure(space group C2/m,Z=4)and lattice parameters a=8.7248(11)Å,b=3.2322(4)Å,c=7.4724(9)Å,andβ=119.263°,was synthesized under a pressure of 4~GPa at a temperature between 1100℃and 1200℃.The structure ofα-MoP_(2) and its relationship to other transition metal diphosphides are discussed.Surprisingly,the ambient pressure phase orthorhombicβ-MoP_(2)(space group Cmc21)is denser in structure thanα-MoP_(2).Room-temperature high-pressure x-ray diffraction studies exclude the possibility of phase transition fromβ-MoP_(2) to α-MoP_(2),suggesting thatα-MoP_(2) is a stable phase at ambient conditions;this is also supported by the total energy and phonon calculations.

Deformable Catalytic Material Derived from Mechanical Flexibility for Hydrogen Evolution Reaction

Deformable catalytic material with excellent flexible structure is a new type of catalyst that has been applied in various chemical reactions,especially electrocatalytic hydrogen evolution reaction(HER).In recent years,deformable catalysts for HER have made great progress and would become a research hotspot.The catalytic activities of deformable catalysts could be adjustable by the strain engineering and surface reconfiguration.The surface curvature of flexible catalytic materials is closely related to the electrocatalytic HER properties.Here,firstly,we systematically summarized self-adaptive catalytic performance of deformable catalysts and various micro–nanostructures evolution in catalytic HER process.Secondly,a series of strategies to design highly active catalysts based on the mechanical flexibility of lowdimensional nanomaterials were summarized.Last but not least,we presented the challenges and prospects of the study of flexible and deformable micro–nanostructures of electrocatalysts,which would further deepen the understanding of catalytic mechanisms of deformable HER catalyst.

High-pressure new phases of V–N compounds

The high-pressure diagram of V–N compounds is enriched by proposed seven new stable high-pressure phases.The P-1-VN_4with the armchair N-rich structure may be quenched to ambient conditions.The formed N–N covalent bond plays an important role for the structural stability of N-chain.The charge transfer results in a V–N ionic bond interaction,which further improves the stability of N-chain structure.The P-1-VN_4,P4mnc-VN_8,and Immm-VN_(10)with the outstanding detonation properties have potential application in explosive field.

Mg/MgO interfaces as efficient hydrogen evolution cathodes causing accelerated corrosion of additive manufactured Mg alloys:A DFT analysis

The corrosion rates of additive-manufactured Mg alloys are higher than their as-cast counterparts,possibly due to increased kinetics for the hydrogen evolution reaction on secondary phases,which may include oxide inclusions.Scanning Kelvin Probe Force Microscopy demonstrated that MgO inclusions could act as cathodes for Mg corrosion,but their low conductivity likely precludes this.However,the density of state calculations through density functional theory using hybrid HSE06 functional revealed overlapping electronic states at the Mg/MgO interface,which facilitates electron transfers and participates in redox reactions.Subsequent determination of the hydrogen absorption energy at the Mg/MgO interface reveals it to be an excellent catalytic site,with HER being found to be a factor of 23x more efficient at the interface than on metallic Mg.The results not only support the plausibility of the Mg/MgO interface being an effective cathode to the adjacent anodic Mg matrix during corrosion but also contribute to the understanding of the enhanced cathodic activities observed during the anodic dissolution of magnesium.

Electron-distribution control via Pt/NC and MoC/NC dual junction:Boosted hydrogen electro-oxidation and theoretical study

The scarcity,high cost and susceptibility to CO of Platinum severely restrict its application in alkaline hydrogen oxidation reaction(HOR).Hybridizing Pt with other transition metals provides an effective strategy to modulate its catalytic HOR performance,but at the cost of mass activity due to the coverage of modifiers on Pt surface.Herein,we constructed dual junctions'Pt/nitrogen-doped carbon(Pt/NC)andδ-MoC/NC to modify electronic structure of Pt via interfacial electron transfer to acquire Pt-MoC@NC catalyst with electron-deficient Pt nanoparticles,simultaneously endowing it with high mass activity and durability of alkaline HOR.Moreover,the unique structure of Pt-MoC@NC endows Pt with a high COtolerance at 1,000 ppm CO/H_(2),a quality that commercial Pt-C catalyst lacks.The theoretical calculations not only confirm the diffusion of electrons from Pt/NC to Mo C/NC could occur,but also demonstrate the negative shift of Pt d-band center for the optimized binding energies of*H,*OH and CO.

Precisely Control Relationship between Sulfur Vacancy and H Absorption for Boosting Hydrogen Evolution Reaction

Ef fective and robust catalyst is the core of water splitting to produce hydrogen.Here, we report an anionic etching method to tailor the sulfur vacancy(VS) of NiS_(2) to further enhance the electrocatalytic performance for hydrogen evolution reaction(HER). With the VS concentration change from 2.4% to 8.5%, the H* adsorption strength on S sites changed and NiS_(2)-VS 5.9% shows the most optimized H* adsorption for HER with an ultralow onset potential(68 m V) and has long-term stability for 100 h in 1 M KOH media. In situ attenuated-total-reflection Fourier transform infrared spectroscopy(ATR-FTIRS) measurements are usually used to monitor the adsorption of intermediates. The S-H* peak of the Ni S_(2)-VS 5.9% appears at a very low voltage, which is favorable for the HER in alkaline media. Density functional theory calculations also demonstrate the Ni S_(2)-VS 5.9% has the optimal |ΔG^(H*)| of 0.17 e V. This work offers a simple and promising pathway to enhance catalytic activity via precise vacancies strategy.

High volumetric hydrogen density phases of magnesium borohydride at high-pressure:A first-principles study

The previously proposed theoretical and experimental structures, bond characterization, and compressibility of Mg（BH4）2 in a pressure range from 0 to 10 GPa are studied by ab initio density-functional calculations. It is found that the ambient pressure phases of meta-stable I41/amd and unstable P-3ml proposed recently are extra stable and cannot decompose under high pressure. Enthalpy calculation indicates that the ground state of F222 structure proposed by Zhou et al. [2009 Phys. Rev. B 79 212102] will transfer to I41/amd at 0.7 GPa, and then to a P-3ml structure at 6.3 GPa. The experimental P6122 structure （a-phase） transfers to I41/amd at 1.2 GPa. Furthermore, both I41/arnd and P-3ml can exist as high volumetric hydrogen density phases at low pressure. Their theoretical volumetric hydrogen densities reach 146.351 g H2/L and 134.028 g H2/L at ambient pressure, respectively. The calculated phonon dispersion curve shows that the I41/amd phase is dynamically stable in a pressure range from 0 to 4 CPa and the P-3ral phase is stable at pressures higher than 1 GPa. So the I41/arnd phase may be synthesized under high pressure and retained to ambient pressure. Energy band structures show that they are both always ionic crystalline and insulating with a band-gap of about 5 eV in this pressure range. In addition, they each have an anisotropic compressibility. The c axis of these structures is easy to compress. Especially, the c axis and volume of P-3ml phase are extraordinarily compressible, showing that compression along the e axis can increase the volumetric hydrogen content for both I41/amd and P-3ml structures.

Theoretical analysis of hydrogen solubility in direct coal liquefaction solvents

The cyclic hydrogenation technology in a direct coal liquefaction process relies on the dissolved hydrogen of the solvent or oil participating in the hydrogenation reaction.Thus,a theoretical basis for process optimization and reactor design can be established by analyzing the solubility of hydrogen in liquefaction solvents.Experimental studies of hydrogen solubility in liquefaction solvents are challenging due to harsh reaction conditions and complex solvent compositions.In this study,the composition and content of liquefied solvents were analyzed.As model compounds,hexadecane,toluene,naphthalene,tetrahydronaphthalene,and phenanthrene were chosen to represent the liquefied solvents in chain alkanes and monocyclic,bicyclic,and tricyclic aromatic hydrocarbons.The solubility of hydrogen X(mol/mol)in pure solvent components and mixed solvents(alkanes and aromatics mixed in proportion to the chain alkanes+bicyclic aromatic hydrocarbons,bicyclic saturated aromatic hydrocarbons+bicyclic aromatic hydrocarbons,and bicyclic aromatic hydrocarbons+compounds containing het-eroatoms composed of mixed components)are determined using Aspen simulation at temperature and pressure conditions of 373–523 K and 2–10 MPa.The results demonstrated that at high temperatures and pressures,the solubility of hydrogen in the solvent increases with the increase in temperature and pressure,with the pressure having a greater impact.Further-more,the results revealed that hydrogen is more soluble in straight-chain alkanes than in other solvents,and the solubility of eicosanoids reaches a maximum of 0.296.The hydrogen solubility in aromatic ring compounds decreased gradually with an increase in the aromatic ring number.The influence of chain alkanes on the solubility of hydrogen predominates in a mixture of solvents with different mixing ratios of chain alkanes and aromatic hydrocarbons.The solubility of hydrogen in mixed aromatic solvents is less than that in the corresponding single solvents.Hydrogen is less soluble in solvent compounds containing heteroatoms than in compounds without heteroatoms.