Experimental and Finite Element Analysis of Corroded High-Pressure Pipeline Repaired by Laminated Composite

Repairs of corroded high-pressure pipelines are essential for fluids transportation under high pressure.One of the methods used in their repairs is the use of layered composites.The composite used must have the necessary strength.Therefore,the experiments and analytical solutions presented in this paper are performed according to the relevant standards and codes,including ASME PCC-2,ASME B31.8S,ASME B31.4,ISO 24817 and ASME B31.G.In addition,the experimental tests are replicated numerically using the finite element method.Setting the strain gauges at different distances from the defect location,can reduce the nonlinear effects,deformation,and fluctuations due to the high pressure.The direct relationship between the depth of an axial defect and the stress concentration is observed at the inner side edges of the defect.Composite reparation reduces the non-linearities related to the sharp variation of the geometry and a more reliable numerical simulation could be performed.

Combination of hydrotreating and delayed coking technologies for conversion of residue

Residue conversion by combining catalytic hydrotreating and delayed coking has been evaluated comparatively with both processes alone.Optimal operating conditions are defined to achieve the greatest economic benefit for upgrading an atmospheric residue from a heavy crude oil.A literature model was adapted to simulate the hydrotreating reactor,and for delayed coking,correlations reported in the literature were used.The results with both approaches were employed to calculate the techno-economic feasibility of the combined process scheme.The combination of hydrotreating and delayed coking presented an increase in light fractions of 29% and a reduction in coke production of 47.8%.Based on the calculated net benefit values,it was demonstrated that the combination of hydrotreating and delayed coking is technically and economically better than using each process alone,with highest benefit of 57.7 USD·m^(-3).

A new transition metal diphosphideα-MoP_(2) synthesized by a high-temperature and high-pressure technique

Monoclinicα-MoP_(2),with the OsGe2-type structure(space group C2/m,Z=4)and lattice parameters a=8.7248(11)Å,b=3.2322(4)Å,c=7.4724(9)Å,andβ=119.263°,was synthesized under a pressure of 4~GPa at a temperature between 1100℃and 1200℃.The structure ofα-MoP_(2) and its relationship to other transition metal diphosphides are discussed.Surprisingly,the ambient pressure phase orthorhombicβ-MoP_(2)(space group Cmc21)is denser in structure thanα-MoP_(2).Room-temperature high-pressure x-ray diffraction studies exclude the possibility of phase transition fromβ-MoP_(2) to α-MoP_(2),suggesting thatα-MoP_(2) is a stable phase at ambient conditions;this is also supported by the total energy and phonon calculations.

Numerical Simulation Analysis of the Transformer Fire Extinguishing Process with a High-Pressure Water Mist System under Different Conditions

To thoroughly study the extinguishing effect of a high-pressure water mist fire extinguishing system when a transformer fire occurs,a 3D experimental model of a transformer is established in this work by employing Fire Dynamics Simulator(FDS)software.More specifically,by setting different parameters,the process of the highpressure water mist fire extinguishing system with the presence of both diverse ambient temperatures and water mist sprinkler laying conditions is simulated.In addition,the fire extinguishing effect of the employed high-pressure water mist system with the implementation of different strategies is systematically analyzed.The extracted results show that a fire source farther away fromthe centerline leads to a lower local temperature distribution.In addition,as the ambient temperature increases,the temperature above the fire source decreases,while the temperature and the concentrationof theupperflue gas layer bothdecrease.Interestingly,after thehigh-pressurewatermist sprinkler begins to operate,both the temperature distribution above the fire source and the concentration of the flue gas decrease,which indicates that the high-pressure water mist system plays the role of cooling and dust removal.By comparing various sprinkler laying methods,it is found that the lower sprinkler height has a better effect on the temperature above the fire source,the temperature of the upper flue gas layer,and the concentration of the flue gas.Moreover,when the sprinkler is spread over thewhole transformer,the cooling effect on both the temperature above the fire source and the temperature of the upper flue gas layer is good,whereas the change in the concentration of the flue gas above the fire source is not obvious compared to the case where the sprinkler is not fully spread.

High-pressure new phases of V–N compounds

The high-pressure diagram of V–N compounds is enriched by proposed seven new stable high-pressure phases.The P-1-VN_4with the armchair N-rich structure may be quenched to ambient conditions.The formed N–N covalent bond plays an important role for the structural stability of N-chain.The charge transfer results in a V–N ionic bond interaction,which further improves the stability of N-chain structure.The P-1-VN_4,P4mnc-VN_8,and Immm-VN_(10)with the outstanding detonation properties have potential application in explosive field.

The discovery of TiO_(2)-Ⅱ,the α-PbO_(2)-structured high-pressure polymorph of rutile,in the Suizhou L6 chondrite

We report the discovery of TiO_(2)-Ⅱ in the unmelted rock of the shocked Suizhou L6 chondrite.Natural TiO_(2)-Ⅱ was previously found in ultrahigh-pressure metamorphic and mantle-derived rocks,terrestrial impact structures,and tektite.Our microscopic,Raman spectroscopic,electron microprobe and transmission electron microscopic investigations have revealed:(1) All observed TiO_(2)-Ⅱ grains are related with ilmenite and pyrophanite;(2) TiO_(2)-Ⅱ occurs as needle-and leaf-shaped inclusions in llmenite and patch-,tape-shaped body in pyrophanite;(3)The composition of TiO_(2)-Ⅱ is identical with that of its precursor rutile;(4) The Raman spectrum of TiO_(2)-Ⅱ is in good agreement with that of natural and synthesized α-PbO_(2)-type TiO_(2);(5) TiO_(2)-Ⅱ occurs mainly in the form of well-ordered nano-domains and small mis-orientation among the domains can be observed.(6) All electron diffraction reflections from TiO_(2)-Ⅱ can be indexed to α-PbO_(2)structure in space group Pbcn with lattice parameters of a=4.481 ?,b=5.578 A and c=4.921 A;(7) The exsolution inclusions of rutile from host ilmenite are mostly connected with an alternation process along the lamellar twinning plane of ilmenite induced by shockinduced high pressure and high temperature;(8) The P-T regime of 20-25 GPa and 1000 ℃ estimated for the Suizhou unmelted rock is suitable for phase transition of rutile into TiO_(2)-Ⅱ phase.

Effect of loading on the Ni_2P/Al_2O_3 catalysts for the hydrotreating reactions

The 80%Ni2P/Al2O3 catalysts were prepared by the phosphidation of corresponding 80%Ni/Al2O3 with triphenylphosphine in liquid phase and compared with the 60%Ni2P/Al2O3 for hydrotreating reactions. Both the60%Ni2P/Al2O3 and 80%Ni2P/Al2O3 in comparison exhibited the small and uniform Ni2 P particles（6.3 and8.4 nm,respectively）,high CO uptakes（305 and 345 μmol/g,respectively） and thus high activities for the hydrotreating reactions. After the hydrotreating reactions,the small and uniform Ni2 P particles were remained,although the CO uptakes on the used 60%Ni2P/Al2O3 and 80%Ni2P/Al2O3 were greatly decreased（to 68 and95 μmol/g,respectively） due to the incorporation of S into the Ni2 P surfaces. The 80%Ni2P/Al2O3 was found to be significantly more active than the 60%Ni2P/Al2O3 due to that the 80%Ni2P/Al2O3 possessed more,and more active Ni2 P sites than the 60%Ni2P/Al2O3,probably due to the less S incorporated in the 80%Ni2P/Al2O3 than in the 60%Ni2P/Al2O3 during the hydrotreating reactions.

Optimization of MgO/Al_2O_3 ratio for the maximization of active site densities in the Ni_2P/MgAlO catalysts for the hydrotreating reactions

The Ni2P/MgAlO catalysts with different MgO/Al2O3 ratios were prepared by the phosphidation of corresponding Ni/MgAlO catalysts with triphenylphosphine in liquid phase. It was found that the MgO/Al2O3 ratio affected the Ni2P/MgAlO catalysts significantly. The Ni2P/MgAlO catalyst with the MgO/Al2O3 ratio of 3 (w/w) exhibited the highly dispersed Ni2P particles (similar to 9 nm) with the highest CO uptake (344 mu mol/g) and thus the highest activities for the hydrotreating reactions. However, based on the CO uptakes on the used catalysts, the TOF values for the hydrodesulphurization of dibenzothiophene as well as those for the hydrogenation of tetralin on all the Ni2P/MgAlO catalysts were respectively similar, indicating that the MgO/Al2O3 ratio did not affect the intrinsic activities of Ni2P supported on the MgAlO support for the hydrotreating reactions. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Tectonic Evolution of an Early Precambrian High-Pressure Granulite Belt in the North China Craton

A large-scale high-pressure granulite belt (HPGB), more than 700 km long, is recognized within the metamorphic basement of the North China craton. In the regional tectonic framework, the Hengshan-Chengde HPGB is located in the central collision belt between the western block and eastern block, and represents the deep crustal structural level. The typical high-pressure granulite (HPG) outcrops are distributed in the Hengshan and Chengde areas. HPGs commonly occur as mafic xenoliths within ductile shear zones, and underwent multipile deformations. To the south, the Hengshan-Chengde HPGB is juxtaposed with the Wutai greenstone belt by several strike-slip shear zones. Preliminary isotopic age dating indicates that HPGs from North China were mainly generated at the end of the Neoarchaean, assocaited with tectonic assembly of the western and eastern blocks.

Experimental Study of Integrated Ebullated-bed and Fixed-bed for Hydrotreating Mid-Low Temperature Coal Tar to Clean Fuel

A new hydrotreating technology integrating the ebullated-bed(EB) and the fixed-bed(FB) hydrogenation was proposed to investigate the efficiency for hydrotreating mid- low-temperature coal tar to clean fuel, and multiple tests at the bench scale were carried out. The results showed that the distillates obtained from EB reactors were greatly upgraded and could meet the requirements of FB unit without discarding any tail oil. The naphtha produced from FB reactors could be fed to the catalytic reforming unit, while a high quality diesel was also obtained. The unconverted oil(UCO) could be further hydrocracked to clean fuel. It is found that the removal of impurities from the coal tar oil is related with the molecular aggregation structure and composition of the coal tar. Application of the integrated hydrotreating technology to the hightemperature coal tar processing demonstrated that more than half of heavy components could be effectively upgraded.

Effect of high-pressure homogenization on stability of emulsions containing zein and pectin

The aim of this study was to investigate the effect of high-pressure homogenization on the droplet size and physical stability of different formulations of pectin–zein stabilized rice bran oil emulsions. The obtained emulsions, both before and after passing through highpressure homogenizer, were subjected to stability test under environmental stress conditions,that is, temperature cycling at 4 °C/40 °C for 6 cycles and centrifugal test at 3000 rpm for 10 min. Applying high-pressure homogenization after mechanical homogenization caused only a small additional decrease in emulsion droplet size. The droplet size of emulsions was influenced by the type of pectin used;emulsions using high methoxy pectin(HMP) were smaller than that using low methoxy pectin(LMP). This is due to a greater emulsifying property of HMP than LMP. The emulsions stabilized by HMP–zein showed good physical stability with lower percent creaming index than those using LMP, both before and after passing through high-pressure homogenizer. The stability of emulsions after passing through high-pressure homogenizer was slightly higher when using higher zein concentration, resulting from stronger pectin–zein complexes that could rearrange and adsorb onto the emulsion droplets.

A study of hydrate plug formation in a subsea natural gas pipeline using a novel high-pressure flow loop

The natural gas pipeline from Platform QKI8-1 in the southwest of Bohai Bay to the onshore processing facility is a subsea wet gas pipeline exposed to high pressure and low temperature for a long distance. Blockages in the pipeline occur occasionally. To maintain the natural gas flow in the pipeline, we proposed a method for analyzing blockages and ascribed them to the hydrate formation and agglomeration. A new high-pressure flow loop was developed to investigate hydrate plug formation and hydrate particle size, using a mixture of diesel oil, water, and natural gas as experimental fluids. The influences of pressure and initial flow rate were also studied. Experimental results indicated that when the flow rate was below 850 kg/h, gas hydrates would form and then plug the pipeline, even at a low water content （10%） of a water/oil emulsion. Furthermore, some practical suggestions were made for daily management of the subsea pipeline.

Regulating catalyst morphology to boost the stability of Ni–Mo/Al_(2)O_(3) catalyst for ebullated-bed residue hydrotreating

Hydrotreating of vacuum residue by ebullated-bed shows tremendous significance due to more stringent environmental regulations and growing demand for lighter fuels. However, enhancing the catalyst stability still remains as a challenging task. Herein, two Ni–Mo/Al_(2)O_(3) catalysts with distinct morphologies(i.e., spherical and cylindrical) were first designed, and the morphology effect on deactivation was systematically elucidated employing multi-characterizations, such as HRTEM with EDX mapping, electron microprobe analysis, FT-IR, TGA and Raman. It is found that spherical catalyst exhibits superior hydrotreating stability over 1600 h. The carbonaceous deposits on spherical catalyst with less graphite structure are lighter, and the coke weight is also smaller. In addition, the metal deposits uniformly distribute in the spherical catalyst, which is better than the concentrated distribution near the pore mouth for the cylindrical catalyst. Furthermore, the intrinsic reason for the differences was analyzed by the bed expansion experiment. Higher bed expansion rate together with the better mass transfer ability leads to the enhanced performance. This work sheds new light on the design of more efficient industrial hydrotreating catalyst based on morphology effect.

Protolith ages and timing of peak and retrograde metamorphism of the high-pressure granulites in the Shandong Peninsula,eastern North China Craton

High-pressure （HP） granulites widely occur as enclaves within tonalite-trondhjemite- granodiorite （TTG） gneisses of the Early Precambrian metamorphic basement in the Shandong Peninsula, southeast part of the North China Craton （NCC）. Based on cathodoluminescence （CL）, laser Raman spec- troscopy and in-situ U-Pb dating, we characterize the zircons from the HP granulites and group them into three main types： inherited （magmatic） zircon, HP metamorphic zircon and retrograde zircon. The inher- ited zircons with clear or weakly defined magmatic zoning contain inclusions of apatites, and 207pb/206pb ages of 2915--2890 Ma and 2763--2510 Ma, correlating with two magmatic events in the Archaean base- ment. The homogeneous HP metamorphic zircons contain index minerals of high-pressure metamor- phism including garnet, clinopyroxene, plagioclase, quartz, rutile and apatite, and yield 207pb/2066pb ages between 1900 and 1850 Ma, marking the timing of peak HP granulite facies metamorphism. The retrograde zircons contain inclusions of orthopyroxene, plagioclase, quartz, apatite and amphibole, and yield the youngest 207pb/206pb ages of 1840-1820 Ma among the three groups, which we correlate to the medium to low-pressure granulite facies retrograde metamorphism. The data presented in this study suggest subduction of Meso- and Neoarchean magmatic protoliths to lower crust depths where they were subjected to HP granulite facies metamorphism during Palaeoproterozoic （1900-1850 Ma）. Subse- quently, the HP granulites were exhumated to upper crust levels, and were ovel-printed by medium to low-pressure granulite and amphibolite facies retrograde event at ca. 1840--820 Ma.

Preparation of Fe_2P/Al_2O_3 and FeP/Al_2O_3 catalysts for the hydrotreating reactions

A 60%Fe/Al_2O_3 catalyst was prepared by the co-precipitation method.It was reduced by H_2 to produce metallic Fe,which was then sulfided by CS_2 to Fe_(0.96) S and Fe_3S_4 or phosphided by triphenylphosphine(PPh3) in liquid phases to Fe2 P and Fe P.It was found that the iron sulfides(Fe0.96 S and Fe_3S_4) exhibited the low activity for the hydrodesulfurization(HDS) reactions.The HDS activity was also low on the Fe(metal)/Al_2O_3 and Fe_2 P/Al_2O_3 catalysts since they were converted into Fe0.96 S and Fe_3S_4 during the HDS reactions.In contrast,the FeP/Al_2O_3 was found to be stable and active for the HDS reactions.In particular,Fe P/Al_2O_3 possessed significantly smaller Fe P particles than Fe P/C,leading to the significant higher HDS activity of FeP/Al_2O_3 than Fe P/C.

A New Kinetic Model for Residue Hydrotreating Based on Chemical Reaction Sections

New definition of virtual molecular-group components about CH and CH2 is proposed in the paper.The new reaction,hydrogenation of CH to CH2(HDCH),can be used to represent the change of C and H in RHT.By using the lumping approach,the kinetic models about HDCH,HDS,HDN,HDCCR,HDM,HDNi and HDV reactions were established.They are key components of the new kinetic model for RHT based on reaction sections.During the construction of kinetic model,goodness-to-fit(R^2)between test data and model data was set as the target value,and the model parameters were calculated accurately.In verification test,the predicted content of H,S,N,CCR,M,Ni and V can match well with the test data.

Geochronological Study of Caledonian Granulite and High-Pressure Gneiss in the Dabie Mountains

Using the single—zircon evaporation technique and U—Pb method, the authors have conducted an isotope geochonological study of the Huilanshan granulite and Shima garnet-bearing plagioclase gneiss (“country rocks” of the Shima eclogite) in the Dabie Mountains. The study shows that these rocks have peak metamorphic ages of 443–455 Ma, which are essentially consistent with that of the Caledonian high—ultrahigh pressure eclogites. This indicates the existence of the Caledonian collisional orogeny in the Dabie Mountains.

Application of high-pressure water jet technology and the theory of rock burst control in roadway

This paper puts forward using high-pressure water jet technology to control rock burst in roadway, and analyzes the theory of controlling rock burst in roadway by the weak structure zone model. The weak structure zone is formed by using high-pressure water jet to cut the coal wall in a continuous and rotational way. In order to study the influence law of weak structure zone in surrounding rock, this paper numerically analyzed the influence law of weak structure zone, and the disturbance law of coal wall and floor under dynamic and static combined load. The results show that when the distance between high-pressure water jet drillings is 3 m and the diameter of drilling is 300 mm, continuous stress superposition zone can be formed. The weak structure zone can transfer and reduce the concentrated static load in surrounding rock, and then form distressed zone. The longer the high-pressure water jet drilling is, the larger the distressed zone is. The stress change and displacement change of non-distressed zone in coal wall and floor are significantly greater than that of distressed zone under dynamic and static combined load. And it shows that the distressed zone can effectively control rock burst in roadway under dynamic and static combined load. High-pressure water jet technology was applied in the haulage gate of 250203 working face in Yanbei Coal Mine, and had gained good effect. The study conclusions provide theoretical foundation and a new guidance for controlling rock burst in roadway.

Effects of ultrasound on the desulfurization performance of hot coal gas over Zn-Mn-Cu supported on semi-coke sorbent prepared by high-pressure impregnation method

Zn-Mn-Cu/SC（U） sorbent was hydrothermally synthesized by ultrasound-assisted high-pressure impregnation method with semi-coke（SC）as support and the mixed solution of zinc nitrate,manganese nitrate and copper nitrate as active component precursors.The desulfurization performances of hot coal gas on the prepared sorbent at a mid-temperature of 500°C were tested in fixed-bed reactor.Morphology and pore structure of the prepared sorbent were also characterized by TEM,N2adsorption/desorption isotherms and XRD.For comparison,the sorbent of Zn-Mn-Cu/SC prepared by conventional high-pressure impregnation was also evaluated and characterized in order to study the effects of ultrasound treatment.Zn-Mn-Cu/SC（U） sorbent prepared by high-pressure impregnation under ultrasound-assisted condition showed a better desulfurization performance than Zn-Mn-Cu/SC.It could remove H2 S from 1000×10-6m3/m3 to 0.1×10-6m3/m3 at 500°C and maintained for 12.5 h with the sulfur capacity of 7.74%,in which both the breakthrough time and sulfur capacity were about 32% and 51% higher than those of Zn-Mn-Cu/SC sorbent.The introduction of ultrasound during high-pressure impregnation process greatly improved the morphology and pore structure of the sorbent.The ultrasonic treatment made particle size of active components smaller and made them more evenly disperse on semi-coke support,which provided more opportunities to contact with H2S in coal-based gases.However,there were no any difference in compositions and existing forms of active components on the Zn-Mn-Cu/SC and Zn-Mn-Cu/SC（U） sorbents.

Gas Film Disturbance Characteristics Analysis of High-Speed and High-Pressure Dry Gas Seal

The dry gas seal（DGS） has been widely used in high parameters centrifugal compressor, but the intense vibrations of shafting, especially in high-speed condition, usually result in DGS＇s failure. So the DGS＇s ability of resisting outside interference has become a determining factor of the further development of centrifugal compressor. However, the systematic researches of which about gas film disturbance characteristics of high parameters DGS are very little. In order to study gas film disturbance characteristics of high-speed and high-pressure spiral groove dry gas seal（S-DGS） with a flexibly mounted stator, rotor axial runout and misalignment are taken into consideration, and the finite difference method and analytical method are used to analyze the influence of gas film thickness disturbance on sealing performance parameters, what＇s more, the effects of many key factors on gas film thickness disturbance are systematically investigated. The results show that, when sealed pressure is 10.1MPa and seal face average linear velocity is 107.3 m/s, gas film thickness disturbance has a significant effect on leakage rate, but has relatively litter effect on open force; Excessively large excitation amplitude or excessively high excitation frequency can lead to severe gas film thickness disturbance; And it is beneficial to assure a smaller gas film thickness disturbance when the stator material density is between 3.1 g/cm3 to 8.4 g/cm3; Ensuring sealing performance while minimizing support axial stiffness and support axial damping can help to improve dynamic tracking property of dry gas seal. The proposed research provides the instruction to optimize dynamic tracking property of the DGS.