Size Effect on the Radiation Stability Silicon Dioxide Sphere Particles

The effect of protons(E = 100 keV,F = 5×10^(15) cm^(-2)) exposure on the diffuse reflectance spectra of the SiO_(2 )with different size particles in wavelength range from 250 to 2500 nm have been investigated.Particles were nanosphere,submicrosphere,microsphere and submacrosphere,as well as solid micro-and nanocrystals.The synthesis of the particles was carried out by the formation of silica shells and dissolution of the polystyrene core particles.The surface morphology,surface area and crystal structure of the particles have been investigated.When evaluating the changes of the solar absorptance,it was found that the radiation stability of the micro-and submacro-hollow particles is higher than that of the other nanostructured particles,except for solid microcrystals.The low radiation stability of the hollow microparticles is due to the large void inside the hollow particles where radiation defects are not formed.

Preparation and photocatalytic activity of neodymium doping titania loaded to silicon dioxide

Neodymium doping titania was loaded to silicon dioxide to prepare Nd/TiO2-SiO2 by sol-gel method and Nd/TiO2-SiO2 was characterized by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, Fourier transform-infrared spectroscopy （FT-IR） and diffuse reflectance spectra （DRS）. Photocatalytic activities of Nd/TiO2-SiO2 with different neodymium contents were evaluated by degradation of methyl orange. The light absorption of Nd/TiO2-SiO2 increased with increasing doping neodymium in a visible light range of 388-619 nm, and Nd doping was in favor of decreasing the recombination of photo-generated electrons with holes. Nd and SiO2 improved the photocatalytic activity of TiO2. The optimal molar fraction of Nd to Ti was 0.1%, and the optimum calcination temperature was 600 ℃. The highest degradation rate of methyl orange was 82.9% after irradiation for 1 h.

Effect of TMS(nanostructured silicon dioxide) on growth of Changbai larch seedlings

The roots of 200 one-year-old Changbai Larch (Larix olgensis) seedlings were soaked for 6 hours at the TMS concentrations of 2000, 1000, 500, 250, 125, and 62 μL·L?1. Mean seedling height, root collar diameter, main root length and number of lateral roots were measured every 15 days during growing season from May 30 to Oct. 20. Experimental results showed that TMS treatments greatly promoted seedling growth and improved seedling quality. The treatment by 500 μL·L?1 TMS produced the best result, for which the mean height, root collar diameter, main root length, and the number of lateral roots of seedlings were increased by 42.5%, 30.7%, 14.0%, and 31.6%, respectively, compared to that of the control seedlings. As to seedling quality, grade-I seedling and grade-II seedlings were fifty-fifty, and no grade-III seedlings was found. The treatment by 500 μL·L?1 TMS resulted in the highest chlorophyll concentration. Keywords Changbai Larch - Larix olgensis - Seedling production - Nanostructured silicon dioxide CLC number S143.8 Document code B Foundation item: This study is supported by Jilin Forestry Group Co.Biography: LIN Baoshan (1955-), male, Associate professor at the college of forestry, Beihua University, Jilin City 132011, Jilin Province, P.R China.Responsible editor: Chai Ruihai.

Polymer grafting modification of the surface of nano silicon dioxide

Based on the composite modification technology of the surface of nano Silicondioxide by non-soap emulsion polymerization, it is verified that there are polymer grafted on thesurface of nano silicon dioxide. The modification mechanism and the bonding status on the surface ofnano silicon dioxide after modification were suggested via the results of the infrared spectrum,transmission electronic microscope photograph and X-ray photoelectron spectrum. The hydroxyl formedby hydrolyzing of silane coupling agent reacts with hydroxyl on the surface of nano silicon dioxideto form Si-O-Si bonds by losing water molecules and hence the double bonds are introduced onto thesurface of nano silicon dioxide. The surface of nano silicon dioxide is grafted with polymer throughfree radical polymerization between the double bonds on the surface of nano silicon dioxide andstyrene under the action of initiating agent. The dispersibility of nano silicon dioxide and thecontrollability of surface modification of nano silicon dioxide can be greatly improved by themodification process.

Preparation of high-purity straight silicon nanowires by molten salt electrolysis

Silicon nanowires of high purity and regular morphology are of prime importance to ensure high specific capacities of lithium-ion batteries and reproducible electrode assembly process.Using nickel formate as a metal catalyst precursor,straight silicon nanowires(65–150 nm in diameter)were directly prepared by electrolysis from the Ni/SiO2 porous pellets with 0.8 wt%nickel content in molten CaCl2 at 900℃.Benefiting from their straight appearance and high purity,the silicon nanowires therefore offered an initial coulombic efficiency of 90.53% and specific capacity of 3377 m Ah/g.In addition,the silicon nanowire/carbon composite exhibited excellent cycle performance,retaining 90.38%of the initial capacity after 100 cycles.Whilst further study on the charge storage performance is still ongoing,these preliminary results demonstrate that nickel formate is an efficient and effective metal catalyst precursor for catalytic preparation of high purity straight silicon nanowires via the molten salt electrolysis,which is suitable for large-scale production.

Rain Erosion Behavior of Silicon Dioxide Films Prepared on Sapphire

Silicon dioxide （SiO2） films were prepared on sapphire （α-Al2O3） by radio frequency magnetron reactive sputtering in order to increase both transmission and rain erosion resistant performance of infrared domes of sapphire. Composition and structure of SiO2 films were analyzed by X-ray photoelectron spectroscopy （XPS） and X-ray diffraction （XRD）, respectively. The transmittance of uncoated and coated sapphire was measured using a Fourier transform infrared （FTIR） spectrometer. Rain erosion tests of the uncoated and coated sapphire were performed at 211 m/s impact velocity with an exposure time ranging from 1 to 8 min on a whirling arm rig. Results show that the deposited films can greatly increase the transmission of sapphire in mid-wave IR. After rain erosion test, decreases in normalized transmission were less than 1% for designed SiO2 films and the SiO2 coating was strongly bonded to the sapphire substrate. In addition, sapphires coated with SiO2 films had a higher transmittance than uncoated ones after rain erosion.

Determination of Triclocarban, Triclosan and Methyl-Triclosan in Environmental Water by Silicon Dioxide/Polystyrene Composite Microspheres Solid-Phase Extraction Combined with HPLC-ESI-MS

This paper developed a sensitive and efficient analytical method for triclocarban (TCC), triclosan (TCS) and Methyl-triclosan (MTCS) determination in environmental water, which involves enrichment by using silicon dioxide/polystyrene composite microspheres solid-phase extraction and detection with HPLC-ESI-MS. The influence of several operational parameters, including the eluant and its volume, the flow rate and acidity of water sample were investigated and optimized. Under the optimum conditions, the limits of detection were 1.0 ng/L, 2.5 and 4.5 ng/L for TCC, TCS, and MTCS, respectively. The linearity of the method was observed in the range of 5-2000 ng/L, with correlation coefficients (r2) >.99. The spiked recoveries of TCC, TCS and MTCS in water sampleswereachieved in the range of 89.5% -96.8% with RSD below 5.7%. The proposed method has been successfully applied to analyze real water samples and satisfactory results were achieved.

Removal of Chromium from Aqueous Solution Using Hybrid Membrane of Chitosan and Silicon Dioxide

Adsorption experiment from aqueous solutions containing known amount of chromium （Cr） using hybrid membrane of chitosan and silicon dioxide was explored to evaluate the efficiency of the membrane as sorbent for Cr（VI）. Some variable parameters such as pH, contact time and the dosage of the membrane were optimized. Adsorption isotherms of Cr（VI） onto the hybrid membrane were measured with varying initial concentrations under optimized condition. Furthermore, the sorption mechanism of Cr by the membrane was investigated by applying Langmuir and Freundlich isotherm equations to the data obtained. The surface morphology of the membrane was determined by SEM （scanning electron microscope） for material characterization. The concentrations of Cr in solution are determined by ICP-MS （inductively coupled plasma mass spectrometry）. Hybrid membrane of chitosan and silicon dioxide can be an efficient sorbent for Cr（VI）.

Chemical Analysis Method for Magnesia and Magnesia-Alumina Refractories——Gravimetric-Molybdenum Blue Photometric Method for Determination of Silicon Dioxide Content

This standard specifies the gravimetric-molybdenum blue photometric method for determination of silicon dioxide content.

Enhanced etching of silicon didioxide guided by carbon nanotubes in HF solution

This paper describes a new method to create nanoscale SiO2 pits or channels using single-walled carbon nanotubes （SWNTs） in an HF solution at room temperature within a few seconds. Using aligned SWNT arrays, a pattern of nanoscale SiO2 channels can be prepared. The nanoscale SiO2 patterns can also be created on the surface of three- dimensional （3D） SiO2 substrate and even the nanoscale trenches can be constructed with arbitrary shapes. A possible mechanism for this enhanced etching of SiO2 has been qualitatively analysed using defects in SWNTs, combined with H3O＋ electric double layers around SWNTs in an HF solution.

Ginseng ameliorates pulmonary toxicity induced by silicon dioxide nanoparticles in rats

Objective:To investigate the protective and therapeutic role of ginseng against silicon dioxide nanoparticles(SiO2NPs)-induced toxicity in the lungs.Methods:Sixty male rats were divided into five groups(n=12/group);group 1 was used as a control,group 2 received ginseng,group 3 was treated with SiO2NPs,and group 4 was pretreated with ginseng one week before SiO2NPs,while group 5 was given SiO2NPs one week before supplementation with ginseng.Animals were treated with both ginseng and SiO2NPs orally for five weeks.Real-time PCR was used to measure gene expression.Besides,DNA damage and cell cycle changes were determined by comet assay and flow cytometry,respectively.Histological study was also done to assess the effect of ginseng on SiO2NPs-induced toxicity.Results:SiO2NPs increased lipid peroxidation and decreased the activities of antioxidant enzymes.SiO2NPs induced apoptosis in lung tissues as revealed by upregulation of Bax and caspase 3 and downregulation of Bcl-2 as well as the induction of DNA damage.SiO2NPs also caused inflammation as indicated by upregulation of the inflammation-related genes[interleukin 1 beta(IL-1β),tumor necrosis factor-alpha(TNF-α),nuclear factor kappa B(NF-κB),cyclooxygenase 2(COX2),and transforming growth factor-beta 1(TGFβ1)]as well as cell cycle arrest in the G0/G1 phase of lung cells.Moreover,histopathological examination proved the biochemical and molecular perturbations that occurred due to SiO2NPs toxicity.However,ginseng alleviated SiO2NPs-induced toxicity in rat lung.Conclusions:Ginseng has a potent preventive and therapeutic effect and could be used in the treatment of SiO2NPs-induced pulmonary toxicity.

Preparation and Characterization of CA-MA Eutectic/Silicon Dioxide Nanoscale Composite Phase Change Material from Water Glass via Sol-Gel Method

This work mainly involved the preparation of a nano-scale form-stable phase change material（PCM） consisting of capric and myristic acid（CA-MA） binary eutectic acting as thermal absorbing material and nano silicon dioxide（nano-SiO_2） serving as the supporting material. Industrial water glass for preparation of the nano silicon dioxide matrix and CA-MA eutectic mixture were compounded by single-step sol-gel method with the silane coupling agent. The morphology, chemical characterization and form stability property of the composite PCM were investigated by transmission electron microscopy（TEM）, scanning electron microscopy（SEM）, Fourier-transform infrared（FT-IR） spectroscopy and polarizing microscopy（POM）. It was indicated that the average diameter of the composite PCM particle ranged from 30-100 nm. The CA-MA eutectic was immobilized in the network pores constructed by the Si-O bonds so that the composite PCM was allowed no liquid leakage above the melting temperature of the CA-MA eutectic. Differential scanning calorimetry（DSC） and thermogravimetric analysis（TGA） measurement were conducted to investigate the thermal properties and stability of the composite PCM. From the measurement results, the mass fraction of the CA-MA eutectic in the composite PCM was about 40%. The phase change temperature and latent heat of the composite were determined to be 21.15 ℃ and 55.67 J/g, respectively. Meanwhile, thermal conductivity of the composite was measured to be 0.208 W·m^（-1）·K^（-1） by using the transient hot-wire method. The composite PCM was able to maintain the surrounding temperature close to its phase change temperature and behaved well in thermalregulated performance which was verified by the heat storage-release experiment. This kind of form-stable PCM was supposed to complete thermal insulation even temperature regulation by the dual effect of relatively low thermal conductivity and phase change thermal storage-release properties. So it can be formulated that the nanoscale CA-MA/SiO_2 composite PCM with the form-stable property, good thermal storage capacity and relatively low thermal conductivity can be applied for energy conservation as a kind of thermal functional material.

Desiliconization kinetics of nickeliferous laterite ores in molten sodium hydroxide system

A novel process was proposed for treating nickeliferous laterite ores with molten sodium hydroxide.The effect on silicon extraction caused by the factors,such as stirring speed,reaction temperature,particle size and NaOH-to-ore mass ratio,was investigated.The results show that increasing stirring speed,reaction temperature and NaOH-to-ore mass ratio while decreasing particle size increases silicon extraction rate.The desiliconization kinetics of nickeliferous laterite ores in molten sodium hydroxide system was described successfully by chemical reaction control model.The activation energy of the desiliconization process was found to be 44.01 kJ/mol,and the reaction rate based on a chemical reaction-controlled process can be expressed as:1-(1-α) 1/3 = 27.67exp[-44 010/(RT)]t.

New insights into the effects of silicon content on the oxidation process in silicon-containing steels

Simultaneous thermal analysis（STA） was used to investigate the effects of silicon content on the oxidation kinetics of silicon-containing steels under an atmosphere and heating procedures similar to those used in industrial reheating furnaces for the production of hot-rolled strips. Our results show that when the heating temperature was greater than the melting point of Fe2SiO4, the oxidation rates of steels with different silicon contents were the same; the total mass gain decreased with increasing silicon content, whereas it increased with increasing oxygen content. The oxidation rates for steels with different silicon contents were constant with respect to time under isothermal conditions. In addition, the starting oxidation temperature, the intense oxidation temperature, and the finishing oxidation temperature increased with increasing silicon content; the intense oxidation temperature had no correlation with the melting of Fe2SiO4. Moreover, the silicon distributed in two forms： as Fe2SiO4 at the interface between the innermost layer of oxide scale and the iron matrix, and as particles containing silicon in grains and grain boundaries in the iron matrix.

Study of He-induced nano-cavities as sinks of oxygen for forming silicon-on-insulator

In the present work, a Cz-Silicon wafer is implanted with helium ions to produce a buried porous layer, and then thermally annealed in a dry oxygen atmosphere to make oxygen transport into the cavities. The formation of the buried oxide layer in the case of internal oxidation （ITOX） of the buried porous layer of cavities in the silicon sample is studied by positron beam annihilation （PBA）. The cavities are formed by 15 keV He implantation at a fluence of 2×10^16 cm^-2 and followed by thermal annealing at 673 K for 30 min in vacuum. The internal oxidation is carried out at temperatures ranging from 1073 to 1473 K for 2 h in a dry oxygen atmosphere. The layered structures evolved in the silicon are detected by using the PBA and the thicknesses of their layers and nature are also investigated. It is found that rather high temperatures must be chosen to establish a sufficient flux of oxygen into the cavity layer. On the other hand high temperatures lead to coarsening the cavities and removing the cavity layer finally.

Possibilities and prospects for producing silumins with different silicon contents using amorphous microsilica

The main objective of this work is to research complex physical-chemical processes of Al(l)-SiO2 interface and develop a new technology for producing foundry silumins based on amorphous microsilica obtained from silicon production waste. Effective methods for producing hypoeutectic, eutectic, and hypereutectic silumins using amorphous microsilica were developed. Alloys with a silicon content of 7 wt.% were obtained by blowing preheated amorphous microsilica into the aluminum melt(t=900 ℃) along with the stream of argon followed by intense mixing. Alloys with a silicon content of 21 wt.% were manufactured by induction melting of a silicon-containing mixture(60% Si O2, 40%Al + 20%3 Na F·2 Al F3) subjected to the presintering when the amorphous microsilica was reduced to crystalline silicon. It is found that crystalline silicon, which is formed during the roasting of the tableted burden, is smoothly absorbed by the aluminum melt. Aluminum oxide, obtained during the redox reaction, dissolves in cryolite, after which aluminum and silicon are fused together and transferred to the melt. The calculation of the economic efficiency of producing silumins using amorphous microsilica demonstrates a quick project payback period, as well as a high level of its profitability.

Fabrication of Silicon Quantum Wires by Conventional Silicon Processing

Ultra fine silicon quantum wires with the Si/SiO2 heterointerface have been fabricated successfully by using reactive ion etching, anisotropic wet chemical etching and subsequent thermal oxidation. The cross-sectional image of scanning electron microscope shows the silicon quantum wires of high quality with the linewidth down to 20nm. The present method has many remarkable advantages, which is important to the study of low-dimension quantum physics and devices.

互穿网络结构的二氧化硅/环氧树脂复合材料的制备及介电性能研究

环氧树脂(EP)具有较高的电绝缘性能和较低的介电损耗,因此被广泛应用于电气设备和电子封装等绝缘材料领域。由于传统EP耐热性能较差、韧性不足,极大限制了其作为微电子元器件在高频电场下的使用。本工作以硅烷偶联剂(3-环氧乙基甲氧基丙基)三甲氧基硅烷(KH-560)和正硅酸乙酯(TEOS)为原料,通过溶胶-凝胶法合成末端含有环氧基团的新型端环氧基纳米SiO_(2)(E-SiO_(2)),用其对E-51型EP进行改性,在固化剂作用下使E-SiO_(2)和EP上的环氧基团发生开环反应,通过有机EP与无机E-SiO_(2)填料之间的化学键结合,制备出具有互穿网络结构的E-SiO_(2)/EP复合材料。本工作研究了添加E-SiO_(2)对EP固化反应工艺和综合性能的影响,以期在保证EP低介电常数和低介电损耗的同时,赋予其良好的韧性和耐热性能,为EP在高频电路下的应用奠定基础。

偏硼酸锂熔融-电感耦合等离子体发射光谱法测定有色金属矿中二氧化硅

采用偏硼酸锂于950℃熔融样品,冷却后用盐酸溶解提取定容,选择Si发射波长251.6 nm为最佳分析谱线,建立了电感耦合等离子体发射光谱法测定有色金属矿中二氧化硅的方法。结果表明,二氧化硅在线性范围内的标准曲线相关系数为0.9999,方法检出限为0.32%。对4个国家一级有证标准物质中的二氧化硅进行分析,测定值均与认定值相符。该方法准确度和精密度均满足地质矿产实验室测试质量管理规范(DZ/T 0130—2006)的相关要求。

TiO_(2)添加量对SiC多孔陶瓷物相组成及性能的影响

为制备同时具有高气孔率和高强度的硅结合SiC多孔陶瓷,以α-SiC粉、单质Si粉及TiO_(2)粉为主要原料,在氩气气氛下经1400℃保温3 h制备SiC多孔陶瓷,探究TiO_(2)添加量(加入质量分数分别为0、2%、4%、8%)对材料物相组成、显微形貌、孔径分布及主要物理性能的影响。结果表明:随TiO_(2)添加量的增加,单质Si的衍射峰逐渐消失,材料中检测到Ti_(3)O_(5)及TiSi_(2)物相,伴随着新相的生成,SiC颗粒间结合更加紧密,其显气孔率及平均孔径减小,力学性能显著提升。当TiO_(2)添加量为8%(w)时,材料具有优异的综合性能,其显气孔率、常温抗折强度及平均孔径分别为33.6%、29.6 MPa和0.27μm。