To detect radioactive substances with low activity levels,an anticoincidence detector and a high-purity germanium(HPGe)detector are typically used simultaneously to suppress Compton scattering background,thereby resul...To detect radioactive substances with low activity levels,an anticoincidence detector and a high-purity germanium(HPGe)detector are typically used simultaneously to suppress Compton scattering background,thereby resulting in an extremely low detection limit and improving the measurement accuracy.However,the complex and expensive hardware required does not facilitate the application or promotion of this method.Thus,a method is proposed in this study to discriminate the digital waveform of pulse signals output using an HPGe detector,whereby Compton scattering background is suppressed and a low minimum detectable activity(MDA)is achieved without using an expensive and complex anticoincidence detector and device.The electric-field-strength and energy-deposition distributions of the detector are simulated to determine the relationship between pulse shape and energy-deposition location,as well as the characteristics of energy-deposition distributions for fulland partial-energy deposition events.This relationship is used to develop a pulse-shape-discrimination algorithm based on an artificial neural network for pulse-feature identification.To accurately determine the relationship between the deposited energy of gamma(γ)rays in the detector and the deposition location,we extract four shape parameters from the pulse signals output by the detector.Machine learning is used to input the four shape parameters into the detector.Subsequently,the pulse signals are identified and classified to discriminate between partial-and full-energy deposition events.Some partial-energy deposition events are removed to suppress Compton scattering.The proposed method effectively decreases the MDA of an HPGeγ-energy dispersive spectrometer.Test results show that the Compton suppression factors for energy spectra obtained from measurements on ^(152)Eu,^(137)Cs,and ^(60)Co radioactive sources are 1.13(344 keV),1.11(662 keV),and 1.08(1332 keV),respectively,and that the corresponding MDAs are 1.4%,5.3%,and 21.6%lower,respectively.展开更多
Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In thi...Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.展开更多
A green and effective electrolytic process was developed to produce high-purity Mg metal using primary and secondary resources containing Mg O as a feedstock. The electrolysis of various Mg O resources was conducted u...A green and effective electrolytic process was developed to produce high-purity Mg metal using primary and secondary resources containing Mg O as a feedstock. The electrolysis of various Mg O resources was conducted using a Cu cathode in MgF2– LiF – KCl molten salt at 1043 K by applying an average current of 1.44 A for 12.5 h. The electrolysis of calcined North Korean magnesite and seawater Mg O clinker yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 89.6–92.4%. The electrolysis of oxidized Mg O-C refractory brick, aged ferronickel slag, and ferronickel slag yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 59.3–92.3%. The vacuum distillation of Mg alloys obtained was conducted at 1300 K for 10 h to produce high-purity Mg metal. After vacuum distillation, Mg metal with a purity of above 99.994% was obtained. Therefore, this study demonstrates the feasibility of the production of high-purity Mg metal from various Mg O resources using a novel electrolytic process with a Cu cathode, followed by vacuum distillation.展开更多
Eastern Qinling,China is one of the important rare metal metallogenic provinces with extensively distributed granite pegmatite dikes.The No.5 granite pegmatite intruded into the granitic gneiss of the Qinling Group,an...Eastern Qinling,China is one of the important rare metal metallogenic provinces with extensively distributed granite pegmatite dikes.The No.5 granite pegmatite intruded into the granitic gneiss of the Qinling Group,and the major minerals are quartz(39.8%),K-feldspar(18.8%),albite(36.3%),muscovite(3.4%),and garnet(1.1%).Monazite U–Pb isotopic dating indicates that the No.5 pegmatite from the Eastern Qinling was emplaced at ca.420.2±2.2 Ma,which confirms that highpurity quartz mineralization probably formed during the Early Devonian.In-situ laser ablation inductively coupled plasma mass spectrometry analysis of quartz show that quartz samples from Eastern Qinling have total trace element concentrations(Al,Ti,Sc,Li,B,Cr,Mn,and Fe)ranging from 23.2 to 52.8 ppm,slightly higher than the quartz(impurity element content from 13.4 to 25.9 ppm)of the Spruce Pine high-purity quartz deposit in western North Carolina.The No.5 pegmatite of Eastern Qinling could be defined as one high-purity quartz deposit of China.展开更多
A new process for preparing high-purity iron(HPI)was proposed,and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C,reduced ti...A new process for preparing high-purity iron(HPI)was proposed,and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C,reduced time of 5 h,and CaO content of 2.5wt%,a DRI with a metallization rate of 96.5%was obtained through coal-based direct reduction of ultra-high-grade iron concentrate.Then,an HPI with a Fe purity of 99.95%and C,Si,Mn,and P contents as low as 0.0008wt%,0.0006wt%,0.0014wt%,and 0.0015wt%,respectively,was prepared by smelting separation of the DRI using a smelting temperature of 1625°C,smelting time of 45 min,and CaO content of 9.3wt%.The product of the pilot test with a scale of 0.01 Mt/a had a lower impurity content than the Chinese industry standard.An HPI with a Fe purity of 99.98wt%can be produced through the direct reduction?smelting separation of ultra-high-grade iron concentrate at relatively low cost.The proposed process shows a promising prospect for application in the future.展开更多
It is practically difficult to find titanium sponges with low and stable aluminum impurities on the market even though it is the precondition to prepare high-purity titanium. Analysis indicates that almost all the alu...It is practically difficult to find titanium sponges with low and stable aluminum impurities on the market even though it is the precondition to prepare high-purity titanium. Analysis indicates that almost all the aluminum impurities in the titanium sponge are inherited from the magnesium used to reduce titanium tetrachloride. However, it remains elusive for decades why magnesium produced through the silicothermic reduction method contains a high content of aluminum impurities with large fluctuations. By recourse to thermodynamic calculations and comparative experiments, we demonstrate that fluorite, a material used as a catalyst in the silicothermic reduction method to produce magnesium, is the chief culprit for the pest aluminum and propose a mechanism to rationalize the observed phenomena. Our findings indicate that one practical way to produce qualified magnesium for the production of high-purity titanium is to abandon fluorite during the production of magnesium with the silicothermic reduction method.展开更多
In this study,a novel Mg production process for producing high-purity Mg metal from dolomite was developed.When the electrolysis of calcined dolomite was conducted using Cu cathode and C anode in MgF_(2)–LiF molten s...In this study,a novel Mg production process for producing high-purity Mg metal from dolomite was developed.When the electrolysis of calcined dolomite was conducted using Cu cathode and C anode in MgF_(2)–LiF molten salt at 1083–1173 K by applying an average current of 1.42–1.46 A for 9.50–21.0 h,the current efficiency of 66.4–88.6%was obtained.The produced Mg alloys consisted of MgCu_(2)and Cu(Mg)or MgCu_(2)and CuMg_(2)phases,depending on the Mg concentration in the Mg alloy.When the electrolysis of calcined dolomite was conducted in MgF_(2)–LiF–CaF_(2)molten salt at 1083 K,the current efficiency was 40.9–71.4%,owing to undesired reactions such as electroreduction of Ca^(2+)or/and CO_(3)^(2−)ions.Meanwhile,the current efficiency increased from 40.9%to 63.2%by utilizing a Pt anode,because the occurrence of CO_(3)^(2−)ions in the molten salt was prevented.After vacuum distillation of the obtained Mg alloys at 1300 K for 10 h,Mg metal with a purity of 99.9996–99.9998%was produced.Therefore,the feasibility of this novel process for the production of high-purity Mg metal from dolomite was demonstrated.展开更多
The aim of this work is to inventory and study the lignicolous parasitic macrofungi of the Tin plant formation. The mycological outings from July to September 2018 and 2019, collected forty-four (44) basidiomes throug...The aim of this work is to inventory and study the lignicolous parasitic macrofungi of the Tin plant formation. The mycological outings from July to September 2018 and 2019, collected forty-four (44) basidiomes through a random sampling device over an area of 40,000 m2 including 1000 m long by 40 m2 wide. The standard methods and techniques used in mycology for taxonomic studies were used to describe and classify the carpophores collected in three families: Hymenochaetaceae, Ganodermataceae and Polyporaceae, into eight genera: Onnia (4.55%), Amauroderma (4.55%), Ganoderma (20.45%), Phellinus (52.27%), Inonotus (4.55%), Phellinopsis (6.82%), Grammothele (2.27%) and Trametes (4.55%). The genera Phellinus and Ganoderma were the most abundant. Finally, eight species were identified: Inonotus cf. ochroporus, Inonotus cf. pachyphloeus, Phellinus cf. cryptarum, Phellinus cf. hartigii, Phellinus cf. hippophaecola;Phellinus cf. robustus, Phellinus cf. igniarius, et Amauroderma cf. fasciculatum. Seven fungal species belong to the family Hymenochaetaceae and only the species Amauroderma cf. fasciculatum is a Ganodermataceae. However, all these fungal species are shown to be parasites of trunks and/or branches of the following woody: Parkia biglobosa (50%), Anogeissus leiocarpus (25%), Annona senegalensis (12.5%) and Mangifera indica (12.5%). Authors attest that the presence of phytoparasitic polypores in a plant formation is an indicator of aging hence the urgency to put in place the appropriate measures to safeguard and restore Tin’s plant formation.展开更多
The aim of this study of the spatial dispersion of tin, niobium and tantalum mineralization associated with the Mayo Darlé granitoids was to produce prospecting guides through predictive maps of Sn, Nb and Ta in ...The aim of this study of the spatial dispersion of tin, niobium and tantalum mineralization associated with the Mayo Darlé granitoids was to produce prospecting guides through predictive maps of Sn, Nb and Ta in the region. It was based on a database (in appendix) obtained after analysis of rock samples (greisens and quartz veins) collected in the field, using a portable X-ray fluorescence (XRF) spectrometer. Two approaches were used: 1) structural studies in the field using the directions of veins and fractures 2) the use of variographic maps, an essential element in geostatistics for determining directional anisotropies. A joint synthesis of the modelling results shows that tin, tantalum and niobium mineralization at Mayo Darlé is concentrated along strike intervals N315E to N320E, with mineralization also occurring along strike N35E for high-grade Sn, medium-grade Ta and low-grade Nb. In short, mineral concentrations disperse progressively in space: positively from east to west for tantalum and niobium, and inversely for tin.展开更多
Perovskites are a category of materials with a unique crystal structure that allows them to absorb sunlight efficiently. This efficiency is particularly high in the case of CH<sub>3</sub>NH<sub>3<...Perovskites are a category of materials with a unique crystal structure that allows them to absorb sunlight efficiently. This efficiency is particularly high in the case of CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> mixed perovskites. The combination of lead (Pb) and tin (Sn) in this matrix provides a broad spectrum of sunlight absorption, enabling the generation of a larger voltage and, subsequently, increased power. The primary objective in solar cell development is to maximize the conversion of sunlight into electricity. Mixed perovskites like CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> have demonstrated significant potential in this regard. Their tunable bandgap, courtesy of varying the Pb: Sn ratio, allows for the optimization of sunlight absorption. The result is solar cells that surpass many conventional counterparts in terms of energy efficiency. Another significant advantage of these mixed perovskite solar cells is their cost-effectiveness. They can be manufactured using solution-based processes, which are less expensive than the high-vacuum methods required for traditional silicon solar cells. While the prospects for mixed perovskite solar cells are undeniably promising, there are concerns about the toxicity of lead, a key component of these cells. Lead is known to have harmful effects on the environment and health. The aim of our work is to reduce or eliminate lead toxicity in the perovskite cell while maintaining its efficiency. Thus, in a theoretical and experimental approach, we obtained following efficiencies of samples: CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> (22.49%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.75</sub>Sn<sub>0.25</sub>I<sub>3</sub> (22.72%), CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.5</sub>Sn<sub>0.5</sub>I<sub>3</sub> (23.00%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.25</sub>Sn<sub>0.75</sub>I<sub>3</sub> (22.61%), CH<sub>3</sub>NH<sub>3</sub>SnI<sub>3</sub> (22.38%). Doping with 50% tin gives the highest result (23.00%). By replacing a fraction of the lead with tin, the research aims to reduce the environmental footprint of the cells while maintaining their high performance. However, the challenge is to achieve a balance that does not compromise performance while reducing toxicity. .展开更多
The current electrolytic processes for magnesium(Mg)metal have several disadvantages,such as anhydrous magnesium chloride(MgCl_(2))preparation and generation of harmful chlorine(Cl_(2))gas.To overcome these drawbacks,...The current electrolytic processes for magnesium(Mg)metal have several disadvantages,such as anhydrous magnesium chloride(MgCl_(2))preparation and generation of harmful chlorine(Cl_(2))gas.To overcome these drawbacks,a novel Mg production process to produce high-purity Mg metal directly from magnesium oxide(MgO)was investigated in this study.The electrolysis of MgO was conducted using a liquid tin(Sn)cathode and a carbon(C)anode in the eutectic composition of a magnesium fluoride(MgF_(2))-lithium fluoride(LiF)molten salt under an applied voltage of 2.5 V at 1053-1113 K.Under certain conditions,the Mg-Sn alloys with Mg_(2)Sn and Mg(Sn)phases were obtained with a current efficiency of 86.6%at 1053 K.To produce high-purity Mg metal from the Mg-Sn alloy,vacuum distillation was conducted at 1200-1300 K for a duration of 5-10 h.Following the vacuum distillation,the concentration of Mg in the Mg-Sn alloy feed decreased from 34.1 to 0.17 mass%,and Mg metal with a purity of 99.999%was obtained at 1200 K.Therefore,the electrolytic process developed here is feasible for the production of high-purity Mg metal from MgO using an efficient method.展开更多
基金This work was supported by the National Key R&D Program of China(Nos.2022YFF0709503,2022YFB1902700,2017YFC0602101)the Key Research and Development Program of Sichuan province(No.2023YFG0347)the Key Research and Development Program of Sichuan province(No.2020ZDZX0007).
文摘To detect radioactive substances with low activity levels,an anticoincidence detector and a high-purity germanium(HPGe)detector are typically used simultaneously to suppress Compton scattering background,thereby resulting in an extremely low detection limit and improving the measurement accuracy.However,the complex and expensive hardware required does not facilitate the application or promotion of this method.Thus,a method is proposed in this study to discriminate the digital waveform of pulse signals output using an HPGe detector,whereby Compton scattering background is suppressed and a low minimum detectable activity(MDA)is achieved without using an expensive and complex anticoincidence detector and device.The electric-field-strength and energy-deposition distributions of the detector are simulated to determine the relationship between pulse shape and energy-deposition location,as well as the characteristics of energy-deposition distributions for fulland partial-energy deposition events.This relationship is used to develop a pulse-shape-discrimination algorithm based on an artificial neural network for pulse-feature identification.To accurately determine the relationship between the deposited energy of gamma(γ)rays in the detector and the deposition location,we extract four shape parameters from the pulse signals output by the detector.Machine learning is used to input the four shape parameters into the detector.Subsequently,the pulse signals are identified and classified to discriminate between partial-and full-energy deposition events.Some partial-energy deposition events are removed to suppress Compton scattering.The proposed method effectively decreases the MDA of an HPGeγ-energy dispersive spectrometer.Test results show that the Compton suppression factors for energy spectra obtained from measurements on ^(152)Eu,^(137)Cs,and ^(60)Co radioactive sources are 1.13(344 keV),1.11(662 keV),and 1.08(1332 keV),respectively,and that the corresponding MDAs are 1.4%,5.3%,and 21.6%lower,respectively.
基金supported by the Key Research and Development Program of Guangxi Province,China (No.AB23075174)the National Natural Science Foundation of China (No.52174386)the Science and Technology Plan Project of Sichuan Province,China (No.2022YFS0459).
文摘Iron-rich electrolytic manganese residue(IREMR)is an industrial waste produced during the processing of electrolytic metal manganese,and it contains certain amounts of Fe and Mn resources and other heavy metals.In this study,the slurry electrolysis technique was used to recover high-purity Fe powder from IREMR.The effects of IREMR and H2SO4 mass ratio,current density,reaction temper-ature,and electrolytic time on the leaching and current efficiencies of Fe were studied.According to the results,high-purity Fe powder can be recovered from the cathode plate,and the slurry electrolyte can be recycled.The leaching efficiency,current efficiency,and purity of Fe reached 92.58%,80.65%,and 98.72wt%,respectively,at a 1:2.5 mass ratio of H2SO4 and IREMR,reaction temperature of 60℃,electric current density of 30 mA/cm^(2),and reaction time of 8 h.In addition,vibrating sample magnetometer(VSM)analysis showed that the coercivity of electrolytic iron powder was 54.5 A/m,which reached the advanced magnetic grade of electrical pure-iron powder(DT4A coercivity standard).The slurry electrolytic method provides fundamental support for the industrial application of Fe resource recovery in IRMER.
基金supported by the Korea Evaluation Institute of Industrial Technology funded by the Korean Ministry of Industry in Korea (Project No.:20000970, 20–9805)Basic Research Project (22–3803) of the Korea Institute of Geoscience and Mineral Resources (KIGAM) funded by the Ministry of Science and ICT of Korea。
文摘A green and effective electrolytic process was developed to produce high-purity Mg metal using primary and secondary resources containing Mg O as a feedstock. The electrolysis of various Mg O resources was conducted using a Cu cathode in MgF2– LiF – KCl molten salt at 1043 K by applying an average current of 1.44 A for 12.5 h. The electrolysis of calcined North Korean magnesite and seawater Mg O clinker yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 89.6–92.4%. The electrolysis of oxidized Mg O-C refractory brick, aged ferronickel slag, and ferronickel slag yielded Mg alloys of MgCu2and(Cu) phases with current efficiencies of 59.3–92.3%. The vacuum distillation of Mg alloys obtained was conducted at 1300 K for 10 h to produce high-purity Mg metal. After vacuum distillation, Mg metal with a purity of above 99.994% was obtained. Therefore, this study demonstrates the feasibility of the production of high-purity Mg metal from various Mg O resources using a novel electrolytic process with a Cu cathode, followed by vacuum distillation.
基金the National Natural Science Foundation of China(42062006 and 41962007)the National Key Research and Development Program of China(2016YFC0600207)+1 种基金the Project of China Geological Survey(DD20190186 and 12120114034501)the science and technology research project of Jiangxi Provincial Department of Education(GJJ190379)。
文摘Eastern Qinling,China is one of the important rare metal metallogenic provinces with extensively distributed granite pegmatite dikes.The No.5 granite pegmatite intruded into the granitic gneiss of the Qinling Group,and the major minerals are quartz(39.8%),K-feldspar(18.8%),albite(36.3%),muscovite(3.4%),and garnet(1.1%).Monazite U–Pb isotopic dating indicates that the No.5 pegmatite from the Eastern Qinling was emplaced at ca.420.2±2.2 Ma,which confirms that highpurity quartz mineralization probably formed during the Early Devonian.In-situ laser ablation inductively coupled plasma mass spectrometry analysis of quartz show that quartz samples from Eastern Qinling have total trace element concentrations(Al,Ti,Sc,Li,B,Cr,Mn,and Fe)ranging from 23.2 to 52.8 ppm,slightly higher than the quartz(impurity element content from 13.4 to 25.9 ppm)of the Spruce Pine high-purity quartz deposit in western North Carolina.The No.5 pegmatite of Eastern Qinling could be defined as one high-purity quartz deposit of China.
基金the National Natural Science Foundation of China(No.51904063)the Fundamental Research Funds for the Central Universities,China(Nos.N172503016,N172502005,and N172506011)the China Postdoctoral Science Foundation(No.2018M640259).
文摘A new process for preparing high-purity iron(HPI)was proposed,and it was investigated by laboratory experiments and pilot tests.The results show that under conditions of a reduced temperature of 1075°C,reduced time of 5 h,and CaO content of 2.5wt%,a DRI with a metallization rate of 96.5%was obtained through coal-based direct reduction of ultra-high-grade iron concentrate.Then,an HPI with a Fe purity of 99.95%and C,Si,Mn,and P contents as low as 0.0008wt%,0.0006wt%,0.0014wt%,and 0.0015wt%,respectively,was prepared by smelting separation of the DRI using a smelting temperature of 1625°C,smelting time of 45 min,and CaO content of 9.3wt%.The product of the pilot test with a scale of 0.01 Mt/a had a lower impurity content than the Chinese industry standard.An HPI with a Fe purity of 99.98wt%can be produced through the direct reduction?smelting separation of ultra-high-grade iron concentrate at relatively low cost.The proposed process shows a promising prospect for application in the future.
基金the support from the National Natural Science Foundation of China (No.52031011)funding from the Science and Technology Departments of Shaanxi and Xi’an,China (Nos.2021GXLH-Z-015,2016KTZDGY-04-04 and 201805064ZD15CG48)。
文摘It is practically difficult to find titanium sponges with low and stable aluminum impurities on the market even though it is the precondition to prepare high-purity titanium. Analysis indicates that almost all the aluminum impurities in the titanium sponge are inherited from the magnesium used to reduce titanium tetrachloride. However, it remains elusive for decades why magnesium produced through the silicothermic reduction method contains a high content of aluminum impurities with large fluctuations. By recourse to thermodynamic calculations and comparative experiments, we demonstrate that fluorite, a material used as a catalyst in the silicothermic reduction method to produce magnesium, is the chief culprit for the pest aluminum and propose a mechanism to rationalize the observed phenomena. Our findings indicate that one practical way to produce qualified magnesium for the production of high-purity titanium is to abandon fluorite during the production of magnesium with the silicothermic reduction method.
基金supported by the National Research Councile of Science and Technology funded by the Korean Ministry of Industry in Korea(Project Nos.:1711173260,22-3803)the Korea Evaluation Institute of Industrial Technology funded by the Korean Ministry of Industry in Korea(Project Nos.:1415179713,20011157).
文摘In this study,a novel Mg production process for producing high-purity Mg metal from dolomite was developed.When the electrolysis of calcined dolomite was conducted using Cu cathode and C anode in MgF_(2)–LiF molten salt at 1083–1173 K by applying an average current of 1.42–1.46 A for 9.50–21.0 h,the current efficiency of 66.4–88.6%was obtained.The produced Mg alloys consisted of MgCu_(2)and Cu(Mg)or MgCu_(2)and CuMg_(2)phases,depending on the Mg concentration in the Mg alloy.When the electrolysis of calcined dolomite was conducted in MgF_(2)–LiF–CaF_(2)molten salt at 1083 K,the current efficiency was 40.9–71.4%,owing to undesired reactions such as electroreduction of Ca^(2+)or/and CO_(3)^(2−)ions.Meanwhile,the current efficiency increased from 40.9%to 63.2%by utilizing a Pt anode,because the occurrence of CO_(3)^(2−)ions in the molten salt was prevented.After vacuum distillation of the obtained Mg alloys at 1300 K for 10 h,Mg metal with a purity of 99.9996–99.9998%was produced.Therefore,the feasibility of this novel process for the production of high-purity Mg metal from dolomite was demonstrated.
文摘The aim of this work is to inventory and study the lignicolous parasitic macrofungi of the Tin plant formation. The mycological outings from July to September 2018 and 2019, collected forty-four (44) basidiomes through a random sampling device over an area of 40,000 m2 including 1000 m long by 40 m2 wide. The standard methods and techniques used in mycology for taxonomic studies were used to describe and classify the carpophores collected in three families: Hymenochaetaceae, Ganodermataceae and Polyporaceae, into eight genera: Onnia (4.55%), Amauroderma (4.55%), Ganoderma (20.45%), Phellinus (52.27%), Inonotus (4.55%), Phellinopsis (6.82%), Grammothele (2.27%) and Trametes (4.55%). The genera Phellinus and Ganoderma were the most abundant. Finally, eight species were identified: Inonotus cf. ochroporus, Inonotus cf. pachyphloeus, Phellinus cf. cryptarum, Phellinus cf. hartigii, Phellinus cf. hippophaecola;Phellinus cf. robustus, Phellinus cf. igniarius, et Amauroderma cf. fasciculatum. Seven fungal species belong to the family Hymenochaetaceae and only the species Amauroderma cf. fasciculatum is a Ganodermataceae. However, all these fungal species are shown to be parasites of trunks and/or branches of the following woody: Parkia biglobosa (50%), Anogeissus leiocarpus (25%), Annona senegalensis (12.5%) and Mangifera indica (12.5%). Authors attest that the presence of phytoparasitic polypores in a plant formation is an indicator of aging hence the urgency to put in place the appropriate measures to safeguard and restore Tin’s plant formation.
文摘The aim of this study of the spatial dispersion of tin, niobium and tantalum mineralization associated with the Mayo Darlé granitoids was to produce prospecting guides through predictive maps of Sn, Nb and Ta in the region. It was based on a database (in appendix) obtained after analysis of rock samples (greisens and quartz veins) collected in the field, using a portable X-ray fluorescence (XRF) spectrometer. Two approaches were used: 1) structural studies in the field using the directions of veins and fractures 2) the use of variographic maps, an essential element in geostatistics for determining directional anisotropies. A joint synthesis of the modelling results shows that tin, tantalum and niobium mineralization at Mayo Darlé is concentrated along strike intervals N315E to N320E, with mineralization also occurring along strike N35E for high-grade Sn, medium-grade Ta and low-grade Nb. In short, mineral concentrations disperse progressively in space: positively from east to west for tantalum and niobium, and inversely for tin.
文摘Perovskites are a category of materials with a unique crystal structure that allows them to absorb sunlight efficiently. This efficiency is particularly high in the case of CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> mixed perovskites. The combination of lead (Pb) and tin (Sn) in this matrix provides a broad spectrum of sunlight absorption, enabling the generation of a larger voltage and, subsequently, increased power. The primary objective in solar cell development is to maximize the conversion of sunlight into electricity. Mixed perovskites like CH<sub>3</sub>NH<sub>3</sub>Pb<sub>1-x</sub>Sn<sub>x</sub>I<sub>3</sub> have demonstrated significant potential in this regard. Their tunable bandgap, courtesy of varying the Pb: Sn ratio, allows for the optimization of sunlight absorption. The result is solar cells that surpass many conventional counterparts in terms of energy efficiency. Another significant advantage of these mixed perovskite solar cells is their cost-effectiveness. They can be manufactured using solution-based processes, which are less expensive than the high-vacuum methods required for traditional silicon solar cells. While the prospects for mixed perovskite solar cells are undeniably promising, there are concerns about the toxicity of lead, a key component of these cells. Lead is known to have harmful effects on the environment and health. The aim of our work is to reduce or eliminate lead toxicity in the perovskite cell while maintaining its efficiency. Thus, in a theoretical and experimental approach, we obtained following efficiencies of samples: CH<sub>3</sub>NH<sub>3</sub>PbI<sub>3</sub> (22.49%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.75</sub>Sn<sub>0.25</sub>I<sub>3</sub> (22.72%), CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.5</sub>Sn<sub>0.5</sub>I<sub>3</sub> (23.00%) CH<sub>3</sub>NH<sub>3</sub>Pb<sub>0.25</sub>Sn<sub>0.75</sub>I<sub>3</sub> (22.61%), CH<sub>3</sub>NH<sub>3</sub>SnI<sub>3</sub> (22.38%). Doping with 50% tin gives the highest result (23.00%). By replacing a fraction of the lead with tin, the research aims to reduce the environmental footprint of the cells while maintaining their high performance. However, the challenge is to achieve a balance that does not compromise performance while reducing toxicity. .
基金supported by the National Research Council of Science and Technology(NST)grant by the Korea government(MSIT)(No.CRC-1506-KIGAM)。
文摘The current electrolytic processes for magnesium(Mg)metal have several disadvantages,such as anhydrous magnesium chloride(MgCl_(2))preparation and generation of harmful chlorine(Cl_(2))gas.To overcome these drawbacks,a novel Mg production process to produce high-purity Mg metal directly from magnesium oxide(MgO)was investigated in this study.The electrolysis of MgO was conducted using a liquid tin(Sn)cathode and a carbon(C)anode in the eutectic composition of a magnesium fluoride(MgF_(2))-lithium fluoride(LiF)molten salt under an applied voltage of 2.5 V at 1053-1113 K.Under certain conditions,the Mg-Sn alloys with Mg_(2)Sn and Mg(Sn)phases were obtained with a current efficiency of 86.6%at 1053 K.To produce high-purity Mg metal from the Mg-Sn alloy,vacuum distillation was conducted at 1200-1300 K for a duration of 5-10 h.Following the vacuum distillation,the concentration of Mg in the Mg-Sn alloy feed decreased from 34.1 to 0.17 mass%,and Mg metal with a purity of 99.999%was obtained at 1200 K.Therefore,the electrolytic process developed here is feasible for the production of high-purity Mg metal from MgO using an efficient method.