Data-Empowered High-Quality Economic Development: Mechanisms and Pathways

To achieve high-quality economic development,it is imperative to prioritize the real economy and foster new factors for economic growth.Data,as a new factor of production,plays a pivotal role in facilitating the seamless integration between digital technology and the real economy.It possesses inherent attributes and techno-economic characteristics that enable the extraction of value across various processes,including production,transaction,consumption,and regulatory supervision.The integration with digital technology enhances the productivity and efficiency of the real economy by facilitating service sector digitalization,accelerating the growth of the new real economy,and supporting the virtual economy in its role of serving the real economy.At present,unleashing the value of data is hindered by inadequate fundamental systems for the data,a lack of activity in the transaction market,and the underutilization of the data as a factor of production by enterprises in the real economy.Therefore,it is advised that data be fully utilized to develop the real economy through the four-pronged approach of“enhancing support for the high-quality provision of the data,expediting the integration of the data into the real economy,promoting the high-quality development of the real economy,and enhancing public service and governance systems”.

Data-driven methods for predicting the representative temperature of bridge cable based on limited measured data

Cable-stayed bridges have been widely used in high-speed railway infrastructure.The accurate determination of cable’s representative temperatures is vital during the intricate processes of design,construction,and maintenance of cable-stayed bridges.However,the representative temperatures of stayed cables are not specified in the existing design codes.To address this issue,this study investigates the distribution of the cable temperature and determinates its representative temperature.First,an experimental investigation,spanning over a period of one year,was carried out near the bridge site to obtain the temperature data.According to the statistical analysis of the measured data,it reveals that the temperature distribution is generally uniform along the cable cross-section without significant temperature gradient.Then,based on the limited data,the Monte Carlo,the gradient boosted regression trees(GBRT),and univariate linear regression(ULR)methods are employed to predict the cable’s representative temperature throughout the service life.These methods effectively overcome the limitations of insufficient monitoring data and accurately predict the representative temperature of the cables.However,each method has its own advantages and limitations in terms of applicability and accuracy.A comprehensive evaluation of the performance of these methods is conducted,and practical recommendations are provided for their application.The proposed methods and representative temperatures provide a good basis for the operation and maintenance of in-service long-span cable-stayed bridges.

Measurement and Evolution of High-quality Development Level of Marine Fishery in China

High-quality development of marine fisheries provides an important advantage for China to build itself into a maritime power and implement the Blue Granary Plan effectively.Based on the concepts of‘new development’,‘food security’,and the six dimensions of‘openness,innovation,coordination,green,sharing,and security’,in this study,we established an evaluation index system for the high-quality development of China’s marine fishery sector.We applied the entropy method to evaluate the high-quality development level of China’s marine fishery sector from 2000 to 2016 and explored its spatial and temporal evolution rules.Our results indicated that:1)from 2000 to 2016,China’s marine fishery sector was in the primary stage of high-quality development;2)spatially,the highquality development of marine fisheries showed an upward trend in all provinces,autonomous regions,and municipalities in the country(not including Hong Kong,Macao and Taiwan of China),and with time,the distribution pattern changed from single to multi-polarization;3)temporally,the development level of high-quality marine fisheries fluctuated during the study period.From 2000 to 2010,the growth rate in openness was relatively slow,but after 2010,it increased rapidly.Notably,innovation is the driving force for high-quality development.The green and security factors provide a solid guarantee for high-quality development.In the high-quality development of a region,economic development is better coordinated,and the distribution of benefits is more inclusive.This study provides a theoretical basis to formulate effective marine fishery policies for the high-quality development of the marine fishery sector in China.Exploring the high-quality development and evolution process of marine fishery is conducive to promoting the sustainable development of marine fishery industry,ensuring marine fishery food security,and alleviating global food crisis.

Theoretical Mechanisms,Practice Foundations,and Policy Options for Big Data Driven High-quality Economic Growth in China

In the transition of China’s economy from high-speed growth to high-quality growth in the new era,economic practices are oriented to fostering new growth drivers,developing new industries,and forming new models.Based on the data flow,big data effectively integrates technology,material,fund,and human resource flows and reveals new paths for the development of new growth drivers,new industries and new models.Adopting an analytical framework with"macro-meso-micro"levels,this paper elaborates on the theoretical mechanisms by which big data drives high-quality growth through efficiency improvements,upgrades of industrial structures,and business model innovations.It also explores the practical foundations for big data driven high-quality growth including technological advancements of big data,the development of big data industries,and the formulation of big data strategies.Finally,this paper proposes policy options for big data promoting high-quality growth in terms of developing digital economy,consolidating the infrastructure construction of big data,expediting convergence of big data and the real economy,advocating for a big data culture,and expanding financing options for big data.

Growth of High-Quality Superconducting FeSe0.5Te0.5 Thin Films Suitable for Angle-Resolved Photoemission Spectroscopy Measurements via Pulsed Laser Deposition

High-quality superconducting FeSe0.5 Te0.5 films are epitaxiMly grown on different substrates by using the pulsed laser deposition method. By measuring the transport properties and surface morphology of films grown on single- crystal substrates of Al2O3 （0001）, SrTiO3 （001）, and MgO （001）, as well as monitoring the real-time growth process on MgO substrates with reflection high energy electron diffraction, we find the appropriate parameters for epitaxial growth of high-quality FeSe0.5 Te0.5 thin films suitable for angle-resolved photoemission spectroscopy measurements. We further report the angle-resolved photoemission spectroscopy characterization of the super- conducting films. The clearly resolved Fermi surfaces and the band structure suggest a sample quality that is as good as that of high-quality single-crystals, demonstrating that the pulsed laser deposition method can serve as a promising technique for in situ preparation and manipulation of iron-based superconducting thin films, which may bring new prosperity to angle-resolved photoemission spectroscopy research on iron-based superconductors.

Assessing high-quality development of the Guizhou industry under the big data strategy

Industry is the main industry of the real economy,the main body of scientific and technological innovation,and essential support for improving the quality and efficiency of the regional economy.In recent years,Guizhou’s industry has achieved efficiency,motivation,and change by relying on three strategic actions:big data,significant poverty alleviation,and big ecology,which has promoted the development of Guizhou’s s industrial economy.Guided by the ideas and concepts of high-quality development,this paper intends to construct the evaluation index system and evaluation model for the high-quality development of the industrial economy.This paper evaluates the high-quality development of the industrial economy in Guizhou Province from both vertical and horizontal aspects.Vertically,Guizhou in recent years in terms of big data,big ecology,and poverty alleviation strategy under the development trend is good;horizontally,among the four provinces and cities in southwestern China,Guizhou Province has the lowest average score in the past five years,and it is urgent to improve the talent policy and promote the upgrading of industrial structure.Finally,combined with relevant policies,countermeasures and suggestions are put forward for the shortboard of industrial development in Guizhou to promote the high-quality development of Guizhou’s industry.

Recent progress in nuclear data measurement for ADS at IMP

Recent progress in nuclear data measurement for ADS at Institute of Modern Physics is reviewed briefly.Based on the cooler storage ring of the Heavy Ion Research Facility in Lanzhou, nuclear data terminal was established.The nuclear data measurement facility for the ADS spallation target has been constructed, which provides a very important platform for the experimental measurements of spallation reactions. A number of experiments have been conducted in the nuclear data terminal. A Neutron Time-of-Flight(NTOF)spectrometer was developed for the study of neutron production from spallation reactions related to the ADS project.The experiments of 400 MeV/u ^(16)O bombarded on a tungsten target were presented using a NTOF spectrometer.Neutron yields for 250 MeV protons incident on a thick grain-made tungsten target and a thick solid lead target have been measured using the water-bath neutron activation method. Spallation residual productions were studied by bombarding W and Pb targets with a 250 MeV proton beam using the neutron activation method. Benchmarking of evaluated nuclear data libraries was performed for D-T neutrons on ADS relevant materials by using the benchmark experimental facility at the China Institute of Atomic Energy.

Similarity measure design for high dimensional data

Information analysis of high dimensional data was carried out through similarity measure application. High dimensional data were considered as the a typical structure. Additionally, overlapped and non-overlapped data were introduced, and similarity measure analysis was also illustrated and compared with conventional similarity measure. As a result, overlapped data comparison was possible to present similarity with conventional similarity measure. Non-overlapped data similarity analysis provided the clue to solve the similarity of high dimensional data. Considering high dimensional data analysis was designed with consideration of neighborhoods information. Conservative and strict solutions were proposed. Proposed similarity measure was applied to express financial fraud among multi dimensional datasets. In illustrative example, financial fraud similarity with respect to age, gender, qualification and job was presented. And with the proposed similarity measure, high dimensional personal data were calculated to evaluate how similar to the financial fraud. Calculation results show that the actual fraud has rather high similarity measure compared to the average, from minimal 0.0609 to maximal 0.1667.

Diverging Diamond Interchange Performance Measures Using Connected Vehicle Data

Since the first Diverging Diamond Interchange (DDI) implementation in 2009, most of the performance studies developed for this type of interchange have been based on simulations and historical crash data, with a small number of studies using Automated Traffic Signal Performance Measures (ATSPM). Simulation models require considerable effort to collect volumes and to model actual controller operations. Safety studies based on historical crashes usually require from 3 to 5 years of data collection. ATSPMs rely on sensing equipment. This study describes the use of connected vehicle trajectory data to analyze the performance of a DDI located in the metropolitan area of Fort Wayne, IN. An extension of the Purdue Probe Diagram (PPD) is proposed to assess the levels of delay, progression, and saturation. Further, an additional PPD variation is presented that provides a convenient visualization to qualitatively understand progression patterns and to evaluate queue length for spillback in the critical interior crossover. Over 7000 trajectories and 130,000 GPS points were analyzed between the 7th and the 11th of June 2021 from 5:00 AM to 10:00 PM to estimate the DDI’s arrivals on green, level of service, split failures, and downstream blockage. Although this technique was demonstrated for weekdays, the ubiquity of connected vehicle data makes it very easy to adapt these techniques to analysis during special events, winter storms, and weekends. Furthermore, the methodologies presented in this paper can be applied by any agency wanting to assess the performance of any DDI in their jurisdiction.

Design of similarity measure for discrete data and application to multi-dimension

Similarity measure design for discrete data group was proposed. Similarity measure design for continuous membership function was also carried out. Proposed similarity measures were designed based on fuzzy number and distance measure, and were proved. To calculate the degree of similarity of discrete data, relative degree between data and total distribution was obtained. Discrete data similarity measure was completed with combination of mentioned relative degrees. Power interconnected system with multi characteristics was considered to apply discrete similarity measure. Naturally, similarity measure was extended to multi-dimensional similarity measure case, and applied to bus clustering problem.

Strategy for Data Stream Processing Based on Measurement Metadata: An Outpatient Monitoring Scenario

In this work we discuss SDSPbMM, an integrated Strategy for Data Stream Processing based on Measurement Metadata, applied to an outpatient monitoring scenario. The measures associated to the attributes of the patient (entity) under monitoring, come from heterogeneous data sources as data streams, together with metadata associated with the formal definition of a measurement and evaluation project. Such metadata supports the patient analysis and monitoring in a more consistent way, facilitating for instance: i) The early detection of problems typical of data such as missing values, outliers, among others;and ii) The risk anticipation by means of on-line classification models adapted to the patient. We also performed a simulation using a prototype developed for outpatient monitoring, in order to analyze empirically processing times and variable scalability, which shed light on the feasibility of applying the prototype to real situations. In addition, we analyze statistically the results of the simulation, in order to detect the components which incorporate more variability to the system.

Data Fusion Method for Manufacturing Measurement

A data fusion method of online multisensors is prop os ed in this paper based on artificial neuron. First, the dynamic data fusion mode l on artificial neuron is built. Then the calibration of data fusion is discusse d with self-adaptive weighing technique. Finally performance of the method is d emonstrated by an online vibration measurement case. The results show that the f used data are more stable, sensitive, accurate, reliable than that of single sen sor data.

Similarity measure design on overlapped and non-overlapped data

Similarity measure design on non-overlapped data was carried out and compared with the case of overlapped data.Unconsistant feature of similarity on overlapped data to non-overlapped data was provided by example.By the artificial data illustration,it was proved that the conventional similarity measure was not proper to calculate the similarity measure of the non-overlapped case.To overcome the unbalance problem,similarity measure on non-overlapped data was obtained by considering neighbor information.Hence,different approaches to design similarity measure were proposed and proved by consideration of neighbor information.With the example of artificial data,similarity measure calculation was carried out.Similarity measure extension to intuitionistic fuzzy sets(IFSs)containing uncertainty named hesitance was also followed.

Orthogonal Series Estimation of Nonparametric Regression Measurement Error Models with Validation Data

In this article we study the estimation method of nonparametric regression measurement error model based on a validation data. The estimation procedures are based on orthogonal series estimation and truncated series approximation methods without specifying any structure equation and the distribution assumption. The convergence rates of the proposed estimator are derived. By example and through simulation, the method is robust against the misspecification of a measurement error model.

Voidage Measurement of Air-Water Two-phase Flow Based on ERT Sensor and Data Mining Technology

Based on an electrical resistance tomography(ERT) sensor and the data mining technology,a new voidage measurement method is proposed for air-water two-phase flow.The data mining technology used in this work is a least squares support vector machine(LS-SVM) algorithm together with the feature extraction method,and three feature extraction methods are tested:principal component analysis(PCA),partial least squares(PLS) and independent component analysis(ICA).In the practical voidage measurement process,the flow pattern is firstly identified directly from the conductance values obtained by the ERT sensor.Then,the appropriate voidage measurement model is selected according to the flow pattern identification result.Finally,the voidage is calculated.Experimental results show that the proposed method can measure the voidage effectively,and the measurement accuracy and speed are satisfactory.Compared with the conventional voidage measurement methods based on ERT,the proposed method doesn't need any image reconstruction process,so it has the advantage of good real-time performance.Due to the introduction of flow pattern identification,the influence of flow pattern on the voidage measurement is overcome.Besides,it is demonstrated that the LS-SVM method with PLS feature extraction presents the best measurement performance among the tested methods.

Estimation of Nonparametric Multiple Regression Measurement Error Models with Validation Data

In this article, we develop estimation approaches for nonparametric multiple regression measurement error models when both independent validation data on covariables and primary data on the response variable and surrogate covariables are available. An estimator which integrates Fourier series estimation and truncated series approximation methods is derived without any error model structure assumption between the true covariables and surrogate variables. Most importantly, our proposed methodology can be readily extended to the case that only some of covariates are measured with errors with the assistance of validation data. Under mild conditions, we derive the convergence rates of the proposed estimators. The finite-sample properties of the estimators are investigated through simulation studies.

On Human Autonomic Nervous Activity Related to Weather Conditions Based on Big Data Measurement via Smartphone

This research uses our previously-developed smartphone camera-based heart rate change analysis system to survey the correlation between weather patterns and the autonomic nervous activity across a big data set of approximately 200,000 entries. The results showed a trend in which a significant decrease was seen in sympathetic nervous activity in both males and females—the higher the temperature. In addition, a significant increase was seen in the sympathetic nervous system in both males and females—the higher the atmospheric pressure. Lastly, a significant decrease was seen in the sympathetic nervous system in both males and females—the more precipitation there was. These results accord with prior research and with human biological phenomena, and we were able to use a data set of approximately 200,000 entries to statistically demonstrate our hypothesis. We believe this represents a valuable set of reference data for use in the health care.

On Human Autonomic Nervous Activity Related to Behavior, Daily and Regional Changes Based on Big Data Measurement via Smartphone

This research uses a large amount of autonomic nervous system data (approximately 100,000 entries) to investigate the relationship between human autonomic nervous activity and behaviors, daily and regional changes. Data were measured via a heart rate variability analysis system that utilizes the camera of smartphones. This system was developed by the authors during previous research. The relations between autonomic nervous system and behaviors, total power and sympathetic nervous activity were found to rise after waking, while during leisure time, the total power rises and sympathetic nervous activity is inhibited. Concerning the relationship between autonomic nervous system and day of the week, it was found that total power decreases from the middle through the latter part of the week (namely, Wednesday, Thursday, and Friday), while it rises on Saturday, while the sympathetic nervous activity is suppressed on Saturday. Regarding the relationship between autonomic nervous system and region, it was found that total power is lower in the Kanto region of Japan than in others. This study also shows statistical proof (using a large amount of measurement data) to ideas held by the public for years. Thus, the data can be considered meaningful to the society, and the authors hope that it helps to improve work-life balance.

Kinetic assessment of measured mass flow rates and streamwise pressure distributions in microchannel gas flows

Measured mass flow rates and streamwise pressure distributions of gas flowing through microchannels were reported by many researchers. Assessment of these data is crucial before they are used in the examination of slip models and numerical schemes, and in the design of microchannel elements in various MEMS devices. On the basis of kinetic solutions of the mass flow rates and pressure distributions in microchannel gas flows, the measured data available are properly normalized and then are compared with each other. The 69 normalized data of measured pressure distributions are in excellent agreement, and 67 of them are within 1 ± 0.05. The normalized data of mass flow-rates ranging between 0.95 and 1 agree well with each other as the inlet Knudsen number Kni 〈 0.02, but they scatter between 0.85 and 1.15 as Kni 〉 0.02 with. to some extent, a very interesting bifurcation trend.

Block-based test data adequacy measurement criteria and test complexity metrics

On the basis of software testing tools we developed for programming languages, we firstly present a new control flowgraph model based on block. In view of the notion of block, we extend the traditional program\|based software test data adequacy measurement criteria, and empirically analyze the subsume relation between these measurement criteria. Then, we define four test complexity metrics based on block. They are J\|complexity 0; J\|complexity 1; J\|complexity \{1+\}; J\|complexity 2. Finally, we show the Kiviat diagram that makes software quality visible.