Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester...Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester fiber blend ratio as well as the different pilling cycles on blended fabrics. The cotton, polyester, and elastane prepared the study fabrics. These fabrics are (90% Cotton/5% Polyester/5% Elastane, 90% Cotton/6% Polyester/4% Elastane, 90% Cotton/7% Polyester/3% Elastane, 90% Cotton/8% Polyester/2% Elastane, and 90% Cotton/9% Polyester/1% Elastane, 85% Cotton/10% Polyester/5% Elastane, 85% Cotton/11% Polyester/4% Elastane, 85% Cotton/12% Polyester/3% Elastane, 85% Cotton/13% Polyester/2% Elastane, and 85% Cotton/ 14% Polyester/1% Elastane, 80% Cotton/15% Polyester/5% Elastane, 80% Cotton/16% Polyester/4% Elastane, 80% Cotton/17% Polyester/3% Elastane, 80% Cotton/18% Polyester/2% Elastane, and 80% Cotton/19% Polyester/1% Elastane). The selected polyester blend ratios were 5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%, 13%, 14%, 15%, 16%, 17%, 18% and 19% respectively. The study used the Martindale pilling tester with 2000, 5000, and 7000 cycles, respectively. The evaluation followed the ISO 12945-2:2000. The study findings are that the polyester fiber blend ratio did not influence the pilling grade on blended fabrics for pilling cycles 2000, and the pilling grade remained constant at 4 - 5. The pilling grade started to deteriorate in pilling cycle 5000 for the fabrics 85%C/10%P/5%E, 85%C/11%P/4%E, 85%C/12%P/3%E, 85%C/ 13%P/2%E, 85%C/14%P/1%E showed the pilling grade 4, and the fabrics made from 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 4, 3, 3, 3, and 3 respectively. For the pilling cycles 7000, the pilling grade further deteriorated for the fabrics 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 3, 3, 2, 2, and 2 respectively. The study finds the dominance of polyester fiber throughout the experiment. The author hopes this study’s outcome will help new researchers, advanced researchers, and the textile industry’s sustainable development research and development team.展开更多
The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination ...The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.展开更多
The bursting strength is an essential quality parameter of knit fabric. The fabric structure, weight, types of fibers, and fiber blend proportion influence the bursting strength parameter. The tenacity of polyester fi...The bursting strength is an essential quality parameter of knit fabric. The fabric structure, weight, types of fibers, and fiber blend proportion influence the bursting strength parameter. The tenacity of polyester fiber is better than cotton and spandex. The study focused on predicting knit fabric bursting strength test value using different fibers (cotton, polyester, and spandex) with varying percentages of the blend ratio. This study used fifteen categories of blended fabrics. The Pearson Correlation and the hypothetical ANOVA regression analysis were conducted to do the statistical significance test. The experimental result reveals that the bursting strength test result increased with the increased percentage of polyester and suggested a suitable regression equation. The dominance of the polyester fiber was observed throughout the experiment, i.e., the higher the polyester blend proportion, the higher the bursting strength value. The inclusion of polyester in blends can reduce the cost of fabric. The developed prediction model or equation can help the fabric manufacturer make appropriate decisions regarding getting the expected bursting strength. The researcher hopes that the findings from this study will motivate new researchers, advanced researchers, and the textile manufacturing industry.展开更多
Six novel hydrolytically degradable polyesters were synthesized from thiodipropionic acid(TDPA)and five diols by melt polycondensation,and characterized by FT-IR,1H NMR,gel permeation chromatography,differential scann...Six novel hydrolytically degradable polyesters were synthesized from thiodipropionic acid(TDPA)and five diols by melt polycondensation,and characterized by FT-IR,1H NMR,gel permeation chromatography,differential scanning calorimetry and thermogravimetry analysis.The polystyrene-equivalent number-average(Mn)and weight-average molecular weight(Mw)of these polyesters ranged from 4900-11100 Da and 7900-20879 Da,respectively,with PDI values of 1.48-1.98.The melting point varied from 62.3-127.9℃,and the 50%mass-loss temperature ranged between 387-417℃.The degradation of these polyesters was studied in terms of relative weight loss in distilled water at different pH.Weight losses of 14%-26%were obtained at pH 7.0,26%-38%at pH 6.0,and 32%-43%at pH 8.3 over a 20-week period.The ecotoxicity study suggested that safety of the synthesized polyesters for the eisenia foetida.These results indicate that these polyesters have a combination of good thermal and degradability behaviors,which can be tailored through selection of the diol monomers used in the synthesis.展开更多
This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experi...This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experiments were used to determine the optimal combination of parameters.In particular,an erosion device con-sisting of a motor with a constantflow rate of 45 L/min,a pump with a diameter of 40 mm,a nozzle with a dia-meter of 5 mm,and a tank made of“perspex glass”55 cm long,30 cm tall,and 25 cm wide was used.The tests were conducted by varying the sample-to-nozzle distance,the pattern angle,and the sand particle size.The results have revealed that the presence of 7.5%by weight of waste coconut shell,for conditions corresponding to 90°angle,sand size 425μm,stand distance 30 cm,gives the best wear resistance(3.04×10^(-5) g/g).Thefiller content and sand particle size affect the erosive rate,with the angle playing a secondary role.The distance between the sample and the nozzle has a weaker effect on erosive wear.The hardness results show that the models(UP-5%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste coconut shell)give the best values for prayer compared to the samples(UP-5 wt.%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste walnut shell).展开更多
In polyester fiber industrial processes,the prediction of key performance indicators is vital for product quality.The esterification process is an indispensable step in the polyester polymerization process.It has the ...In polyester fiber industrial processes,the prediction of key performance indicators is vital for product quality.The esterification process is an indispensable step in the polyester polymerization process.It has the characteristics of strong coupling,nonlinearity and complex mechanism.To solve these problems,we put forward a multi-output Gaussian process regression(MGPR)model based on the combined kernel function for the polyester esterification process.Since the seasonal and trend decomposition using loess(STL)can extract the periodic and trend characteristics of time series,a combined kernel function based on the STL and the kernel function analysis is constructed for the MGPR.The effectiveness of the proposed model is verified by the actual polyester esterification process data collected from fiber production.展开更多
The global polyester resin dispersion market size is anticipated to reach a valuation of US$7,635.4 million by 2023.It is projected to witness a CAGR of 4.8%in the estimated time period from 2023 to 2033.A valuation o...The global polyester resin dispersion market size is anticipated to reach a valuation of US$7,635.4 million by 2023.It is projected to witness a CAGR of 4.8%in the estimated time period from 2023 to 2033.A valuation of around US$12,200.7 million is predicted for the global market by 2033.展开更多
According to Future Market Insights,the global nonwoven polyester fabric market is projected to increase at a CAGR of 6.84%in the forecast period from 2023 to 2033.The market size in 2023 is likely to reach US$54.8 bi...According to Future Market Insights,the global nonwoven polyester fabric market is projected to increase at a CAGR of 6.84%in the forecast period from 2023 to 2033.The market size in 2023 is likely to reach US$54.8 billion and in 2033 it will reach US$106.2 billion.The market size in 2022 was US$51.31 billion.展开更多
An epoxy-terminated hyperbranched aromatic polyester (P3) was synthesized from a hyperbranched aromatic polyester containing carboxylic acid end groups (P1), which was derived from the condensation polymerization of t...An epoxy-terminated hyperbranched aromatic polyester (P3) was synthesized from a hyperbranched aromatic polyester containing carboxylic acid end groups (P1), which was derived from the condensation polymerization of the AB(2) monomer, 5-acetoxyisophthalic acid. Polymer P1 was converted into the polymeric acid chloride by reaction with thionyl chloride. The acid chloride was reacted with ethanol and glycidol to form a poly(ethyl ester) (P2) and an epoxy terminated material (P3), respectively. The reaction conditions in each step of these processes had to be controlled very carefully to avoid unwanted cross-linking reactions. The characterization of products and intermediates, including molecular weight distributions and thermal properties, are reported.展开更多
Unsaturated polyester resin (UPR)/acrylate-terminated polyurethane (ATPU)/organo-modified montmorillonite (OMMT) nanocomposites were prepared by the in situ intercalative polymerization method. Samples were prep...Unsaturated polyester resin (UPR)/acrylate-terminated polyurethane (ATPU)/organo-modified montmorillonite (OMMT) nanocomposites were prepared by the in situ intercalative polymerization method. Samples were prepared by the sequential mixing, i.e. mixture of the ATPU and styrene (S) and OMMT were prepared in the first step; UPR was then added to the pre-intercalates of ATPU/S/OMMT. Results indicate that the mechanical properties and thermal properties of UPR/ATPU/OMMT nanocomposites greatly depend on the amount of ATPU and OMMT. Results show that the addition of ATPU could increase the impact strength of UPR/ATPU composites, but the tensile strength, flexural strength and heat resistance of the materials are obviously decreased. When the weight ratio between UPR, ATPU and OMMT were 82:15:3, the impact strength and heat distortion-temperature of nanocomposite were greatly improved, meanwhile there was little change for other properties of the nanocomposites. The synergistic enhancement effects of ATPU and OMMT on the composites were observed. The structures and morphology of the composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy.展开更多
A novel polyester containing ferrocenyl was prepared by low-temperature interface polycondensation of 1,1'-ferrocenedicarboxylic acid chloride with 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one(DHPZ),which is a twisted...A novel polyester containing ferrocenyl was prepared by low-temperature interface polycondensation of 1,1'-ferrocenedicarboxylic acid chloride with 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one(DHPZ),which is a twisted non-coplanar heterocyclic bisphenol-like monomer.The newly generated polymer was evaluated based on characterization of its solubility,viscosity measurements,elemental analysis,FTIR spectroscopy,differential scanning calorimetric and thermogravimetric studies.展开更多
The plastification modification of poly (vinyl chloride) (PVC) with the long-chain linear polyester (LP) synthesized by linear dodecanedioic acid (DC12) or tetradecanedioic acid (DC14) with different diols i...The plastification modification of poly (vinyl chloride) (PVC) with the long-chain linear polyester (LP) synthesized by linear dodecanedioic acid (DC12) or tetradecanedioic acid (DC14) with different diols is investigated. The processing characteristics, mechanical properties and extraction property of the PVC/LP blends in different solvents (xylene, cyclohexane, ethanol) were also studied in detail. All results were compared with that of the PVC plasticized with dioctyl phthalate (DOP). The results show that the molecular weight, molecular structure and loading of LP greatly influence the mechanical properties of the PVC/LP blends. The processability and the mechanical properties of PVC plasticized by LP are comparable to those of the corresponding PVC/DOP blends. However, the PVC/LP blends posses much better migration resistance property than the corresponding PVC/DOP blends, which makes the long-chain linear polyester become a very good plasticizer candidate for PVC industry.展开更多
The treatment of polyester wastewater using Up flow activated sludge bed anaerobic filer(UASB AF), demonstrated that UASB AF reactors has a high efficiency, its volume loading is 10~12 kgCOD/(m 3·d),HRT is 22~2...The treatment of polyester wastewater using Up flow activated sludge bed anaerobic filer(UASB AF), demonstrated that UASB AF reactors has a high efficiency, its volume loading is 10~12 kgCOD/(m 3·d),HRT is 22~24 h, and the removal of COD is about 80%. The reactor has advantage of fast starting and enduring pulse loading.展开更多
The reaction of salicylic chloride and salicylic amide at 170 ℃ gave benzoxazine and a new macrocyclic polyester 3, whose crystal structure has been determined by single-crystal X-ray diffraction analysis. Compound 3...The reaction of salicylic chloride and salicylic amide at 170 ℃ gave benzoxazine and a new macrocyclic polyester 3, whose crystal structure has been determined by single-crystal X-ray diffraction analysis. Compound 3: C28H16O8, Mr = 480.41, monoclinic, space group P21/n, a = 15.353(3), b = 14.196(3), c = 21.147(4) ? b = 103.32(3), V = 4485(2) ?, Z = 8, F(000) = 1984, Dc = 1.423 g/cm3 and m = 0.106 mm-1. The final R = 0.0535 and wR = 0.1275 for 7903 observed reflections (I ≥ 2(I)). In the asymmetric unit of the compound there exist two independent molecules which are connected by weak aromatic CH…O hydrogen bonding between C(47)?H(47) and atom O(7) of the carbonyl group.展开更多
The role of auxiliary LAB as vehicle in dyeing polyester/wool blends with disperse dyes is described. Dye exhaustion and bonding on polyester/wool samples are studied under different experimental conditions - the LAB ...The role of auxiliary LAB as vehicle in dyeing polyester/wool blends with disperse dyes is described. Dye exhaustion and bonding on polyester/wool samples are studied under different experimental conditions - the LAB amount, the temperature and pH value- to achieve optimum conditions. The results are compared with those obtained with and without conventional dyeing auxiliary products. Although dye exhaustion is higher in the presence of commercial carriers, the dye bonded increases markedly in the presence of auxiliary LAB in both fibers. The role played by auxiliary LAB in polyester/wool blend dyeing can provide a new method for this process.展开更多
This paper investigates the effect of recycled polyester fiber, produced from polyethylene (PET) bottles, in combination with nano-SiO2 as a new stabilizer to improve the mechanical properties of soils. We intend to...This paper investigates the effect of recycled polyester fiber, produced from polyethylene (PET) bottles, in combination with nano-SiO2 as a new stabilizer to improve the mechanical properties of soils. We intend to study the effect of adding nano-SiO2 and recycled polyester fiber on soil engineering properties, especially the shear strength and unconfined compressive strength (UCS), using clayey soil with low liquid limit. Three different combinations of fiber-soil ratios ranging between 0.1% and 0.5% as well as three different combinations of nano-soil ratios ranging between 0.5% and 1% are used. The shear strength and UCS of treated specimens are obtained from direct shear test and unconfined compression test, respectively. Results of this study show that the addition of recycled polyester fiber and nano-SiO2 increases the strength of soil specimens. Both the shear strength and UCS are improved by increasing the contents of recycled polyester fiber and nano-SiO2 in the soil mixture. The increase in the nano-SiO2 content leads to a reduction in failure strain, but the increase in the content of recycled polyester fiber leads to an increase in failure strain. The increase in the contents of recycled polyester fiber and nano-SiO2 leads to an increase in elastic modulus of soils. Based on the test results, the addition of recycled polyester fiber improves the mechanical properties of soils stabilized with nano-SiO2 as well as the recycled polyester fiber has a positive effect on soil behaviors.展开更多
A kind of full biodegradable film material is discussed in this article. The film material is composed of starch, PVA, degradable polyesters(PHB, PHB V, PCL) with built plasticizer, a cross linking reinforcing agen...A kind of full biodegradable film material is discussed in this article. The film material is composed of starch, PVA, degradable polyesters(PHB, PHB V, PCL) with built plasticizer, a cross linking reinforcing agent and a wet strengthening agent. It contains a high percentage of starch, costs cheap and is excellent in weather fastness, temperature resistance and waterproof and it could be completely biodegraded. The present paper deals mainly with a new technical route using a new type of electromagnetic dynamic blow molding extruder and some effects on mechanical properties of the system.展开更多
文摘Pilling is a severe concern for blended fabrics. The aesthetic look and smoothness are the buyers’ prime requirements. The main focus of the study was to see the pilling behavior from various percentages of polyester fiber blend ratio as well as the different pilling cycles on blended fabrics. The cotton, polyester, and elastane prepared the study fabrics. These fabrics are (90% Cotton/5% Polyester/5% Elastane, 90% Cotton/6% Polyester/4% Elastane, 90% Cotton/7% Polyester/3% Elastane, 90% Cotton/8% Polyester/2% Elastane, and 90% Cotton/9% Polyester/1% Elastane, 85% Cotton/10% Polyester/5% Elastane, 85% Cotton/11% Polyester/4% Elastane, 85% Cotton/12% Polyester/3% Elastane, 85% Cotton/13% Polyester/2% Elastane, and 85% Cotton/ 14% Polyester/1% Elastane, 80% Cotton/15% Polyester/5% Elastane, 80% Cotton/16% Polyester/4% Elastane, 80% Cotton/17% Polyester/3% Elastane, 80% Cotton/18% Polyester/2% Elastane, and 80% Cotton/19% Polyester/1% Elastane). The selected polyester blend ratios were 5%, 6%, 7%, 8%, 9%, 10%, 11%, 12%, 13%, 14%, 15%, 16%, 17%, 18% and 19% respectively. The study used the Martindale pilling tester with 2000, 5000, and 7000 cycles, respectively. The evaluation followed the ISO 12945-2:2000. The study findings are that the polyester fiber blend ratio did not influence the pilling grade on blended fabrics for pilling cycles 2000, and the pilling grade remained constant at 4 - 5. The pilling grade started to deteriorate in pilling cycle 5000 for the fabrics 85%C/10%P/5%E, 85%C/11%P/4%E, 85%C/12%P/3%E, 85%C/ 13%P/2%E, 85%C/14%P/1%E showed the pilling grade 4, and the fabrics made from 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 4, 3, 3, 3, and 3 respectively. For the pilling cycles 7000, the pilling grade further deteriorated for the fabrics 80%C/15%P/5%E, 80%C/16%P/4%E, 80%C/17%P/3%E, 80%C/ 18%P/2%E, 80%C/19%P/1%E showed the pilling grade 3, 3, 2, 2, and 2 respectively. The study finds the dominance of polyester fiber throughout the experiment. The author hopes this study’s outcome will help new researchers, advanced researchers, and the textile industry’s sustainable development research and development team.
基金Funded by the National Natural Science Foundation of China(No.51703169)Key Program of Science and Technology of Jieyang City(No.2019016)Key Research and Development Program of Shandong Province of China(No.2019JZZY010338)。
文摘The work is dedicated to develop a one-step eco-friendly method to prepare antibacterial polyethylene terephthalate(PET).We report a one-step eco-friendly method to manufacture antibacterial PET via on-line amination reaction by melt coextrusion.Beside evenly mixing of poly(hexamethylene guanidine)(PHMG)and PET in the melt coextrusion procedure,the amination reaction also occurred between PHMG and PET under high temperature(230-270℃).The antibacterial ability of composite PET showed obvious PHMG concentration dependence,and antibacterial activity reached more than 99%when PHMG content was 2.5 wt%.Moreover,LIVE/DEAD fluorescence test further confirmed that the composite PET could kill bacteria quickly and efiectively(within 30 min);while negligible cytotoxicity was observed to HSF and HUVEC cells.Onestep eco-friendly fabrication of composite antibacterial PET was accomplished by on-line melt coextrusion.The composite antibacterial PET has potential use in multiple fields to combat with pathogenic including textiles,packaging materials,decoration materials and biomedical devices,etc.
文摘The bursting strength is an essential quality parameter of knit fabric. The fabric structure, weight, types of fibers, and fiber blend proportion influence the bursting strength parameter. The tenacity of polyester fiber is better than cotton and spandex. The study focused on predicting knit fabric bursting strength test value using different fibers (cotton, polyester, and spandex) with varying percentages of the blend ratio. This study used fifteen categories of blended fabrics. The Pearson Correlation and the hypothetical ANOVA regression analysis were conducted to do the statistical significance test. The experimental result reveals that the bursting strength test result increased with the increased percentage of polyester and suggested a suitable regression equation. The dominance of the polyester fiber was observed throughout the experiment, i.e., the higher the polyester blend proportion, the higher the bursting strength value. The inclusion of polyester in blends can reduce the cost of fabric. The developed prediction model or equation can help the fabric manufacturer make appropriate decisions regarding getting the expected bursting strength. The researcher hopes that the findings from this study will motivate new researchers, advanced researchers, and the textile manufacturing industry.
基金Funded by the Program (BG20190227001)of High-end Foreign Experts of the State Administration of Foreign Experts Affairs (SAFEA)the Coal Conversion and New Carbon Materials Hubei Key Laboratory at Wuhan University of Science and Technology (WKDM202005)。
文摘Six novel hydrolytically degradable polyesters were synthesized from thiodipropionic acid(TDPA)and five diols by melt polycondensation,and characterized by FT-IR,1H NMR,gel permeation chromatography,differential scanning calorimetry and thermogravimetry analysis.The polystyrene-equivalent number-average(Mn)and weight-average molecular weight(Mw)of these polyesters ranged from 4900-11100 Da and 7900-20879 Da,respectively,with PDI values of 1.48-1.98.The melting point varied from 62.3-127.9℃,and the 50%mass-loss temperature ranged between 387-417℃.The degradation of these polyesters was studied in terms of relative weight loss in distilled water at different pH.Weight losses of 14%-26%were obtained at pH 7.0,26%-38%at pH 6.0,and 32%-43%at pH 8.3 over a 20-week period.The ecotoxicity study suggested that safety of the synthesized polyesters for the eisenia foetida.These results indicate that these polyesters have a combination of good thermal and degradability behaviors,which can be tailored through selection of the diol monomers used in the synthesis.
文摘This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experiments were used to determine the optimal combination of parameters.In particular,an erosion device con-sisting of a motor with a constantflow rate of 45 L/min,a pump with a diameter of 40 mm,a nozzle with a dia-meter of 5 mm,and a tank made of“perspex glass”55 cm long,30 cm tall,and 25 cm wide was used.The tests were conducted by varying the sample-to-nozzle distance,the pattern angle,and the sand particle size.The results have revealed that the presence of 7.5%by weight of waste coconut shell,for conditions corresponding to 90°angle,sand size 425μm,stand distance 30 cm,gives the best wear resistance(3.04×10^(-5) g/g).Thefiller content and sand particle size affect the erosive rate,with the angle playing a secondary role.The distance between the sample and the nozzle has a weaker effect on erosive wear.The hardness results show that the models(UP-5%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste coconut shell)give the best values for prayer compared to the samples(UP-5 wt.%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste walnut shell).
基金Natural Science Foundation of Shanghai,China(No.19ZR1402300)。
文摘In polyester fiber industrial processes,the prediction of key performance indicators is vital for product quality.The esterification process is an indispensable step in the polyester polymerization process.It has the characteristics of strong coupling,nonlinearity and complex mechanism.To solve these problems,we put forward a multi-output Gaussian process regression(MGPR)model based on the combined kernel function for the polyester esterification process.Since the seasonal and trend decomposition using loess(STL)can extract the periodic and trend characteristics of time series,a combined kernel function based on the STL and the kernel function analysis is constructed for the MGPR.The effectiveness of the proposed model is verified by the actual polyester esterification process data collected from fiber production.
文摘The global polyester resin dispersion market size is anticipated to reach a valuation of US$7,635.4 million by 2023.It is projected to witness a CAGR of 4.8%in the estimated time period from 2023 to 2033.A valuation of around US$12,200.7 million is predicted for the global market by 2033.
文摘According to Future Market Insights,the global nonwoven polyester fabric market is projected to increase at a CAGR of 6.84%in the forecast period from 2023 to 2033.The market size in 2023 is likely to reach US$54.8 billion and in 2033 it will reach US$106.2 billion.The market size in 2022 was US$51.31 billion.
基金The project is supported by the EPSRC and the Youth Science Foundation of Shanghai Higher Education.
文摘An epoxy-terminated hyperbranched aromatic polyester (P3) was synthesized from a hyperbranched aromatic polyester containing carboxylic acid end groups (P1), which was derived from the condensation polymerization of the AB(2) monomer, 5-acetoxyisophthalic acid. Polymer P1 was converted into the polymeric acid chloride by reaction with thionyl chloride. The acid chloride was reacted with ethanol and glycidol to form a poly(ethyl ester) (P2) and an epoxy terminated material (P3), respectively. The reaction conditions in each step of these processes had to be controlled very carefully to avoid unwanted cross-linking reactions. The characterization of products and intermediates, including molecular weight distributions and thermal properties, are reported.
基金This research was supported by the Science and Technology Key Project of Guangdong(A1070203).
文摘Unsaturated polyester resin (UPR)/acrylate-terminated polyurethane (ATPU)/organo-modified montmorillonite (OMMT) nanocomposites were prepared by the in situ intercalative polymerization method. Samples were prepared by the sequential mixing, i.e. mixture of the ATPU and styrene (S) and OMMT were prepared in the first step; UPR was then added to the pre-intercalates of ATPU/S/OMMT. Results indicate that the mechanical properties and thermal properties of UPR/ATPU/OMMT nanocomposites greatly depend on the amount of ATPU and OMMT. Results show that the addition of ATPU could increase the impact strength of UPR/ATPU composites, but the tensile strength, flexural strength and heat resistance of the materials are obviously decreased. When the weight ratio between UPR, ATPU and OMMT were 82:15:3, the impact strength and heat distortion-temperature of nanocomposite were greatly improved, meanwhile there was little change for other properties of the nanocomposites. The synergistic enhancement effects of ATPU and OMMT on the composites were observed. The structures and morphology of the composites were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy.
基金supported by Education Office of Liaoning Province(No.2008567)
文摘A novel polyester containing ferrocenyl was prepared by low-temperature interface polycondensation of 1,1'-ferrocenedicarboxylic acid chloride with 4-(4-hydroxyphenyl)-2,3-phthalazin-1-one(DHPZ),which is a twisted non-coplanar heterocyclic bisphenol-like monomer.The newly generated polymer was evaluated based on characterization of its solubility,viscosity measurements,elemental analysis,FTIR spectroscopy,differential scanning calorimetric and thermogravimetric studies.
基金the Engineering Developing Foundation of Tongji University
文摘The plastification modification of poly (vinyl chloride) (PVC) with the long-chain linear polyester (LP) synthesized by linear dodecanedioic acid (DC12) or tetradecanedioic acid (DC14) with different diols is investigated. The processing characteristics, mechanical properties and extraction property of the PVC/LP blends in different solvents (xylene, cyclohexane, ethanol) were also studied in detail. All results were compared with that of the PVC plasticized with dioctyl phthalate (DOP). The results show that the molecular weight, molecular structure and loading of LP greatly influence the mechanical properties of the PVC/LP blends. The processability and the mechanical properties of PVC plasticized by LP are comparable to those of the corresponding PVC/DOP blends. However, the PVC/LP blends posses much better migration resistance property than the corresponding PVC/DOP blends, which makes the long-chain linear polyester become a very good plasticizer candidate for PVC industry.
文摘The treatment of polyester wastewater using Up flow activated sludge bed anaerobic filer(UASB AF), demonstrated that UASB AF reactors has a high efficiency, its volume loading is 10~12 kgCOD/(m 3·d),HRT is 22~24 h, and the removal of COD is about 80%. The reactor has advantage of fast starting and enduring pulse loading.
基金the National Natural Science Foundation of China (Grant No. 29872023)
文摘The reaction of salicylic chloride and salicylic amide at 170 ℃ gave benzoxazine and a new macrocyclic polyester 3, whose crystal structure has been determined by single-crystal X-ray diffraction analysis. Compound 3: C28H16O8, Mr = 480.41, monoclinic, space group P21/n, a = 15.353(3), b = 14.196(3), c = 21.147(4) ? b = 103.32(3), V = 4485(2) ?, Z = 8, F(000) = 1984, Dc = 1.423 g/cm3 and m = 0.106 mm-1. The final R = 0.0535 and wR = 0.1275 for 7903 observed reflections (I ≥ 2(I)). In the asymmetric unit of the compound there exist two independent molecules which are connected by weak aromatic CH…O hydrogen bonding between C(47)?H(47) and atom O(7) of the carbonyl group.
文摘The role of auxiliary LAB as vehicle in dyeing polyester/wool blends with disperse dyes is described. Dye exhaustion and bonding on polyester/wool samples are studied under different experimental conditions - the LAB amount, the temperature and pH value- to achieve optimum conditions. The results are compared with those obtained with and without conventional dyeing auxiliary products. Although dye exhaustion is higher in the presence of commercial carriers, the dye bonded increases markedly in the presence of auxiliary LAB in both fibers. The role played by auxiliary LAB in polyester/wool blend dyeing can provide a new method for this process.
文摘This paper investigates the effect of recycled polyester fiber, produced from polyethylene (PET) bottles, in combination with nano-SiO2 as a new stabilizer to improve the mechanical properties of soils. We intend to study the effect of adding nano-SiO2 and recycled polyester fiber on soil engineering properties, especially the shear strength and unconfined compressive strength (UCS), using clayey soil with low liquid limit. Three different combinations of fiber-soil ratios ranging between 0.1% and 0.5% as well as three different combinations of nano-soil ratios ranging between 0.5% and 1% are used. The shear strength and UCS of treated specimens are obtained from direct shear test and unconfined compression test, respectively. Results of this study show that the addition of recycled polyester fiber and nano-SiO2 increases the strength of soil specimens. Both the shear strength and UCS are improved by increasing the contents of recycled polyester fiber and nano-SiO2 in the soil mixture. The increase in the nano-SiO2 content leads to a reduction in failure strain, but the increase in the content of recycled polyester fiber leads to an increase in failure strain. The increase in the contents of recycled polyester fiber and nano-SiO2 leads to an increase in elastic modulus of soils. Based on the test results, the addition of recycled polyester fiber improves the mechanical properties of soils stabilized with nano-SiO2 as well as the recycled polyester fiber has a positive effect on soil behaviors.
文摘A kind of full biodegradable film material is discussed in this article. The film material is composed of starch, PVA, degradable polyesters(PHB, PHB V, PCL) with built plasticizer, a cross linking reinforcing agent and a wet strengthening agent. It contains a high percentage of starch, costs cheap and is excellent in weather fastness, temperature resistance and waterproof and it could be completely biodegraded. The present paper deals mainly with a new technical route using a new type of electromagnetic dynamic blow molding extruder and some effects on mechanical properties of the system.