Microstructure,Properties and Crack Suppression Mechanism of High-speed Steel Fabricated by Selective Laser Melting at Different Process Parameters

To enrich material types applied to additive manufacturing and enlarge application scope of additive manufacturing in conformal cooling tools,M2 high-speed steel specimens were fabricated by selective laser melting(SLM).Effects of SLM parameters on the microstructure and mechanical properties of M2 high-speed steel were investigated.The results showed that substrate temperature and energy density had significant influence on the densification process of materials and defects control.Models to evaluate the effect of substrate temperature and energy density on hardness were studied.The optimized process parameters,laser power,scan speed,scan distance,and substrate temperature,for fabricated M2 are 220 W,960 mm/s,0.06 mm,and 200℃,respectively.Based on this,the hardness and tensile strength reached 60 HRC and 1000 MPa,respectively.Interlaminar crack formation and suppression mechanism and the relationship between temperature gradient and thermal stress were illustrated.The inhibition effect of substrate temperature on the cracks generated by residual stresses was also explained.AM showed great application potential in the field of special conformal cooling cutting tool preparation.

Influence of Rare Earth Elements on Microstructure and Mechanical Properties of Cast High-Speed Steel Rolls

The influence of rare earth （RE） elements on the solidification process and eutectic transformation and mechanical properties of the high-V type cast, high-speed steel roll was studied. Test materials with different RE additions were prepared on a horizontal centrifugal casting machine. The solidification process, eutectic structure transformation, carbide morphology, and the elements present, were all investigated by means of differential scanning calorimetry （DSC） and scanning electron microscopy energy dispersive spectrometry （SEM-EDS）. The energy produced by crack initiation and crack extension was analyzed using a digital impact test machine. It was found that rare earth elements increased the tensile strength of the steel by inducing crystallization of earlier eutectic γ-Fe during the solidification process, which in turn increased the solidification temperature and thinned the dendritic grains. Rare earth elements with large atomic radius changed the lattice parameters of the MC carbide by forming rare earth carbides. This had the effect of dispersing longpole M C carbides to provide carbide grains, thereby, reducing the formation of the gross carbide and making more V available, to increase the secondary hardening process and improve the hardness level. The presence of rare earth elements in the steel raised the impact toughness by changing the mechanism of MC carbide formation, thereby increasing the crack initiation energy.

Precipitation and decomposition behaviors of carbides in AISI M2 high-speed steel with nitrogen and mischmetal

The behaviors of the precipitation and decomposition of carbides in AISI M2 high-speed steel modified by nitrogen and mischmetal were investigated using DSC, XRD, SEM and TEM. The as-cast microstructure of the experimental steel consists of dendrites of iron matrix, networks of eutectic carbides and secondary carbides. The average distance between networks is about 34 μm. The carbides mainly include M_2C, M(C,N) and M_6C, and their relative contents are 58.5%, 30.3% and 11.2%, respectively. The average spacing between the M_2C fibers is 1.5 μm. The decomposition of M_2C occurs from 897.2 to 1221.5 ℃(heating rate of 200 ℃/h). Some precipitated carbide particles occur in the M_2C matrix after holding for 15 min at 1100 ℃. With increasing holding time, the carbide fibers neck down more and more obviously until they are broken down. The spectral peaks of M_2C almost disappear after holding for 60 min. The spectral peaks of M_6C gradually strengthen with the holding time, and the relative content of M_6C increases to 79.8% after holding for 60 min. After holding for 180 min, the carbide fibers disappear, and the decomposition products consist of fine carbide particles(about 300 nm) and short rod-like carbides(about 3.5 μm).

PREDICTION OF FLOW STRESS OF HIGH-SPEED STEEL DURING HOT DEFORMATION BY USING BP ARTIFICIAL NEURAL NETWORK

The hot deformation behavior of TI (18W-4Cr-1V) high-speed steel was investigated by means of continuous compression tests performed on Gleeble 1500 thermomechan- ical simulator in a wide range of tempemtures (950℃-1150℃) with strain rotes of 0.001s-1-10s-1 and true strains of 0-0. 7. The flow stress at the above hot defor- mation conditions is predicted by using BP artificial neural network. The architecture of network includes there are three input parameters:strain rate,temperature T and true strain , and just one output parameter, the flow stress ,2 hidden layers are adopted, the first hidden layer includes 9 neurons and second 10 negroes. It has been verified that BP artificial neural network with 3-9-10-1 architecture can predict flow stress of high-speed steel during hot deformation very well. Compared with the prediction method of flow stress by using Zaped-Holloman parumeter and hyperbolic sine stress function, the prediction method by using BP artificial neurul network has higher efficiency and accuracy.

Effect of melting rate on microsegregation and primary MC carbides in M2 high-speed steel during electroslag remelting

Large-size primary MC carbides can significantly reduce the performance of M2 high-speed steel.To better control the morphology and size of primary MC carbides,the effect of melting rate on microsegregation and primary MC carbides of M2 steel during electroslag remelting was investigated.When the melting rate is decreased from 2 kg·min^(-1) to 0.8 kg·min^(-1),the columnar dendrites are gradually coarsened,and the extent of segregation of Mo and V is alleviated,while the segregation of Cr becomes severe.At 2 kg·min^(-1),the number of primary MC carbides per unit area with the sizes in the range of 2 μm to 6 μm accounts for about 75% of all MC carbides,while the carbides are mainly concentrated on the size larger than 8 μm at 0.8 kg·min^(-1).Thermodynamic calculations based on the Clyne-Kurz (simplified to C-K) model shows that MC carbide can be precipitated in the final solidification stage and a smaller secondary dendrite arm spacing caused by higher melting rate (2 kg·min^(-1) in this experiment) facilitates the refinement of primary MC carbides.

Microstructure simulation of rapidly solidified ASP30 high-speed steel particles by gas atomization

In this study, the microstructure evolution of rapidly solidified ASP30 high-speed steel particles was predicted using a simulation method based on the cellular automaton-finite element （CAFE） model. The dendritic growth kinetics, in view of the characteristics of ASP30 steel, were calculated and combined with macro heat transfer calculations by user-defined functions （UDFs） to simulate the microstructure of gas-atomized particles. The relationship among particle diameter, undercooling, and the convection heat transfer coefficient was also inves- tigated to provide cooling conditions for simulations. The simulated results indicated that a columnar grain microstructure was observed in small particles, whereas an equiaxed microstructure was observed in large particles. In addition, the morphologies and microstructures of gas-atomized ASP30 steel particles were also investigated experimentally using scanning electron microscopy （SEM）. The experimental re- suits showed that four major types ofmicrostructures were formed： dendritic, equiaxed, mixed, and multi-droplet microstructures. The simu- lated results and the available experimental data are in good agreement.

Installation position determination of wind speed sensors on steel pole along a high-speed railway

In order to consider the influence of steel pole on the measurement of wind speed sensors and determinate the installation position of wind speed sensors, the flow field around wind speed sensors was investigated. Based on the three-dimensional steady Reynolds-averaged Navier-Stokes equations and k-ε double equations turbulent model, the field flow around the wind speed sensor and the steel pole along a high-speed railway was simulated on an unstructured grid. The grid-independent validation was conducted and the accuracy of the present numerical simulation method was validated by experiments and simulations carried out by previous researchers. Results show that the steel pole has a significant influence on the measurement results of wind speed sensors. As the distance between two wind speed sensors is varied from 0.3 to 1.0 m, the impact angles are less than ±20°, it is proposed that the distance between two wind speed sensors is 0.8 m at least, and the interval between wind speed sensors and the steel pole is more than 1.0 m with the sensors located on the upstream side.

Effect of Some Plating Variables on Zinc Coated Low Carbon Steel Substrates

This work examined the effect of plating variables on zinc coated low carbon steel substrates. The electrodeposition of steel substrates was carried out in zinc electrolyte bath. Time, voltage, distance from the anode to the cathode and the immersion depth served as plating variables. The results showed that weight gained increases as the plating time increases for the constant depth of immersion while the weight gained per unit time by varying immersion depth is irregular. Also, the study demonstrated that sample plated for 20 minutes;20cm from the anode, 45cm depth of immersion at 0.8V exhibited the best plating properties with homogeneity of diffuse plating efficiency.

Microstructure and cutting performance of CrTiAlN coating for high-speed dry milling

Using a closed field unbalanced magnetron sputtering system,the cemented carbide end mills were coated with a CrTiAlN hard coating,which consisted of a Cr adhesive layer,a CrN interlayer and a CrTiAlN top layer.The microstructure and mechanical properties of the coating were investigated by X-ray diffraction（XRD）,scanning electron microscopy（SEM）,transmission electron microscopy（TEM）,micro indentation and scratch test.The cutting performance of the coated end mills were conducted by high-speed dry milling hardened steel（P20,HRC 45）.The results indicates that the coating is composed of（Cr,Ti,Al）N columnar grains with nanolayers.The coating exhibits good adhesion to cemented carbide substrate and high microhardness of around 30 GPa.The coated end mills show significant improvement on tool life and much lower cutting force as compared to the uncoated ones.And the related mechanisms were discussed.

Studies of diamond-like carbon (DLC) films deposited on stainless steel substrate with Si/SiC intermediate layers

In this work, diamond-like carbon （DLC） films were deposited on stainless steel substrates with Si/SiC intermediate layers by combining plasma enhanced sputtering physical vapour deposition （PEUMS-PVD） and microwave electron cyclotron resonance plasma enhanced chemical vapour deposition （MW-ECRPECVD） techniques. The influence of substrate negative self-bias voltage and Si target power on the structure and nano-mechanical behaviour of the DLC films were investigated by Raman spectroscopy, nano-indentation, and the film structural morphology by atomic force microscopy （AFM）. With the increase of deposition bias voltage, the G band shifted to higher wave-number and the integrated intensity ratio ID/IG increased. We considered these as evidences for the development of graphitization in the films. As the substrate negative self-bias voltage increased, particle bombardment function was enhanced and the sp^3-bond carbon density reducing, resulted in the peak values of hardness （H） and elastic modulus （E）. Silicon addition promoted the formation of sp^3 bonding and reduced the hardness. The incorporated Si atoms substituted sp^2- bond carbon atoms in ring structures, which promoted the formation of sp^3-bond. The structural transition from C-C to C-Si bonds resulted in relaxation of the residual stress which led to the decrease of internal stress and hardness. The results of AFM indicated that the films was dense and homogeneous, the roughness of the films was decreased due to the increase of substrate negative self-bias voltage and the Si target power.

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel’s erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gunpowder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel’s inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface’s ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.

Computer simulation on the controlled cooling of 82B high-speed rod

A modified temperature-phase transformation field coupled nonlinear mathematical model was made and used in computer simulation on the controlled cooling of 82B high-speed rods. The surface temperature history and volume fraction of pearlite as well as the phase transformation history were simulated by using the finite element software Marc/Mentat. The simulated results were compared with the actual measurement and the agreement is good which can validate the presented computational models.

Removal Rate of Phosphorus by Different Constructed Wetland Substrates

[ Objective] The study aimed to discuss the removal rate of phosphorus by different constructed wetland substrates. [ Methed] Based on static experiments, we analyzed the removal rate and characteristics of phosphorus by different constructed wetland substrates like steel slag, cin- der slag, shale, boiler slag, soil and gravel. [ Result~ The maximum adsorption of phosphorus by various substrates showed as follows, steel slag 〉 cinder slag 〉 shale 〉 boiler slag 〉 soil 〉 gravel. When the initial concentration of phosphorus was 5 mg/L, the removal rate of phosphorus by the steel slag, cinder slag, shale, boiler slag, soil and gravel was 99.76%, 85.8%, 71.2%, 63.0%, 46.8% and 11.7% respectively. It is suggested that shale and boiler slag can be used as the substrate of subsurface-flow constructed wetlands; cinder slag can be chosen as a renewable sub- strate for intensifying phosphorus removal; steel slag could be used at the end of subsurface-flow constructed wetlands for treating TP in outflows. [Concluslon] The research could provide theoretical references for choosing a suitable substrate for constructed wetlands to remove phosphorus in future.

Corrosion Resistance of Ceramic Coating on Steel Substrate

Fe/Al2O3 ceramic coating was made by spraying and sol-gel. The corrosion resistance between Fe/Al2O3 ceramic coating and steel 45# was studied. By microscope and X-ray diffraction, the binding and the composition of the interface were also analyzed. The results showed that Fe/Al2O3 ceramic coating had dense struc- ture, less porosity and better binding with the substrate which was effective to prevent erosive liquor immersing into the inside of ceramic coating. Some substances that distributed homogeneously in Fe/Al2O3 ceramic coating, such as α-Al2O3, FeAlO3 and Fe3Al, could improve the corrosion resistance of this material.

Influence of the preheated substrate temperature on the microstructure deposition behavior of the 304 stainless steel coatings deposited by cold gas dynamic spraying

The effects of the substrate temperature on the deposition and microstructure of the 304 stainless steel （SS） cold gas dynamic spraying （CGDS） coatings were investigated. It was found that the higher substrate temperature could increase the deposition rate of the 304 SS particles,even the oxide films existed at the interface. There was a critical oxide film with a thickness of 3 -4 um which could be destroyed by the impacted particles. The micro-hardness and microstructure of the 304 SS coatings under different substrate preheating temperatures were almost the same.

微纳米α-Al_(2)O_(3)改性丙烯酸树脂-有机硅烷复合钝化对不锈钢硬度及耐蚀性的影响

通过微纳米α-Al_(2)O_(3)改性丙烯酸树脂-有机硅烷复合而成的无铬钝化液作用于不锈钢基板表面,探究其在不锈钢表面形成的微纳米α-Al_(2)O_(3)钝化膜对不锈钢表层性能的影响。通过表面硬度测试、扫描电镜测试,分析基板表面特征。同时,通过涂层附着力测试和电化学测试,探究涂层的粘结强度和基板的耐蚀性能。结果表明,经微纳米α-Al_(2)O_(3)改性的无铬钝化液使不锈钢板材的耐蚀性显著提升,同时对其表面硬度的提升效果达到80%。

Effect of Fe content on type and distribution of carbides in medium-entropy high-speed steels

The effect of iron content on the type and distribution of carbides in the vacuum arc melted Fex(AlCoCrCuNiV)_(88.05-x)Mo_(5)W_(6)-C_(0.95)(x=69,76,83 wt%,respectively) medium-entropy high-speed steels(ME-HSSs) was studied.The homogeneous distribution of granular MC carbides(M refers to the carbides forming transition metal elements,such as W,Mo and V),both at the grain boundary and in the martensitic matrix,was obtained in the Fe_(76)(AlCoCrCuNiV)_(12.05)Mo_(5)W_(6)-C_(0.95)ME-HSS,after quenching at 1210 ℃ followed by triple tempering at 530 ℃.A maximum hardness of about 841 HV_(0.5) was achieved,even higher than the maximum hardness of the commercially available M_(2)(W_(6)Mo_(5)Cr_(4)V_(2)) HSS,826 HV_(0.5).The medium-entropy effect was shown to be beneficial to transform the solidified primary carbide network into finely dispersed granular MC.However,when the iron content was further reduced to 69 wt%,the enhanced entropy effect promoted the dispersion of carbides but at the same time led to a decrease in the carbide content,so that the maximum hardness(816 HV_(0.5)) was slightly lower than the maximum hardness of M2-HSS.The results provide a novel alloy system together with a simple heat treatment method to obtain hard HSSs,and more importantly to eliminate the primary carbide network which is harmful to the toughness of traditional HSS.

电镀锌镍合金技术应用研究

随着装备所在地域条件的差异化,目前磷化、氧化、镀锌等传统钢铁镀覆层技术已不能满足装备使用环境要求。为了提高市场竞争力,储备针对海洋、热带雨林等恶劣环境下的产品防护技术,研究并应用碱性锌酸盐型电镀锌镍合金新技术是非常必要的。通过开展耐蚀性好的电镀锌镍合金技术研究,采用正交试验和单因素法进行工艺参数匹配性试验研究。对不同钢铁金属材料在不同结构条件下的电镀锌镍合金工艺进行批生产验证及性能检测,为产品防护设计提供依据,最终形成钢铁金属材料锌镍合金典型工艺规范,推广应用到处于海洋气候等恶劣条件下的防护性要求高的军民品。

超高性能混凝土中纤维的界面效应及其与水泥基材的匹配性研究

为了解决超高性能混凝土脆性大和易开裂的问题,增加其抗拉强度和韧性,研究建立了室内试验模型,通过单纤维拉拔试验研究不同纤维类型和纤维埋置深度对水泥基材界面的黏结性能影响。结果表明,在相同的水泥基材料条件下,不锈钢纤维的抗拔荷载最大,束状单丝聚丙烯纤维的抗拔荷载次之,短切丝碳纤维的抗拔荷载远小于不锈钢纤维和束状单丝聚丙烯纤维,纤维类型对界面黏结强度、抗拔荷载影响规律一致;随着纤维埋置深度的增加,不锈钢纤维的和束状单丝聚丙烯纤维的最大拔出荷载均不断增加,而界面黏结强度均不断减小,短切丝碳纤维的最大拔出荷载和界面黏结强度变化不明显。

Centrifugal Casting of High Speed Steel/Nodular Cast Iron Compound Roll Collar

The centrifugal casting of compound HSS/nodular cast iron roll collar was studied,and the factors affecting transition zone quality were analyzed.The pouring temperature and interval in pouring are the main factors affecting transition zone quality.By controlling process parameter and flux adding during casting,high quality roll collar was obtained.The cause,why in the casting of HSS part,segregation appears easily,was analyzed and the countermeasure eliminating segregation was put forward,the measure eliminating heat treatment crackling was also put forward.