High-speed visible light communication based on micro-LED:A technology with wide applications in next generation communication

The evolution of next-generation cellular networks is aimed at creating faster,more reliable solutions.Both the next-generation 6G network and the metaverse require high transmission speeds.Visible light communication(VLC)is deemed an important ancillary technology to wireless communication.It has shown potential for a wide range of applications in next-generation communication.Micro light-emitting diodes(μLEDs)are ideal light sources for high-speed VLC,owing to their high modulation bandwidths.In this review,an overview ofμLEDs for VLC is presented.Methods to improve the modulation bandwidth are discussed in terms of epitaxy optimization,crystal orientation,and active region structure.Moreover,electroluminescent white LEDs,photoluminescent white LEDs based on phosphor or quantum-dot color conversion,andμLED-based detectors for VLC are introduced.Finally,the latest high-speed VLC applications and the application prospects of VLC in 6G are introduced,including underwater VLC and artificial intelligence-based VLC systems.

A CSMA/CA based MAC protocol for hybrid Power-line/Visible-light communication networks:Design and analysis

Hybrid Power-line/Visible-light Communication(HPVC)network has been one of the most promising Cooperative Communication(CC)technologies for constructing Smart Home due to its superior communication reliability and hardware efficiency.Current research on HPVC networks focuses on the performance analysis and optimization of the Physical(PHY)layer,where the Power Line Communication(PLC)component only serves as the backbone to provide power to light Emitting Diode(LED)devices.So designing a Media Access Control(MAC)protocol remains a great challenge because it allows both PLC and Visible Light Communication(VLC)components to operate data transmission,i.e.,to achieve a true HPVC network CC.To solve this problem,we propose a new HPC network MAC protocol(HPVC MAC)based on Carrier Sense Multiple Access/Collision Avoidance(CSMA/CA)by combining IEEE 802.15.7 and IEEE 1901 standards.Firstly,we add an Additional Assistance(AA)layer to provide the channel selection strategies for sensor stations,so that they can complete data transmission on the selected channel via the specified CSMA/CA mechanism,respectively.Based on this,we give a detailed working principle of the HPVC MAC,followed by the construction of a joint analytical model for mathematicalmathematical validation of the HPVC MAC.In the modeling process,the impacts of PHY layer settings(including channel fading types and additive noise feature),CSMA/CA mechanisms of 802.15.7 and 1901,and practical configurations(such as traffic rate,transit buffer size)are comprehensively taken into consideration.Moreover,we prove the proposed analytical model has the solvability.Finally,through extensive simulations,we characterize the HPVC MAC performance under different system parameters and verify the correctness of the corresponding analytical model with an average error rate of 4.62%between the simulation and analytical results.

A High-Speed Bi-Directional Visible Light Communication System Based on RGB-LED

In this paper, we propose and experimentally demonstrate a bi-directional indoor communication system based on visible light RGB-LED. Spectrally efficient modulation formats （QAM-OFDM）, advanced digital signal processing, pre- and post- equalization are adopted to compensate the severe frequency response of indoor channel. In this system, we utilize red-green-blue Light emitting diodes （LEDs）, of which each color can be used to carry different signals. For downlink, the low frequencies of each color are used while for uplink, the high frequencies are used. The overall data rate of downlink and uplink are 1.15-Gb/s and 300-Mb/s. The bit error ratios （BERs） for all channels after 0.7 m indoor delivery are below pre-forward- error-correction （pre-FEC） threshold of 3.8×10-3. To the best of our knowledge, this is the highest data rate in bi-directional visible light communication system.

Channel Capacity and Power Allocation of MIMO Visible Light Communication System

In this paper,the channel capacity of the multiple-input multiple-output(MIMO)visible light communication(VLC)system is investigated under the peak,average optical and electrical power constraints.Finding the channel capacity of MIMO VLC is shown to be a mixed integer programming problem.To address this open problem,we propose an inexact gradient projection method to find the channel capacity-achieving discrete input distribution and the channel capacity of MIMO VLC.Also we derive both upper and lower bounds of the capacity of MIMO VLC with the closed-form expressions.Furthermore,by considering practical discrete constellation inputs,we develop the optimal power allocation scheme to maximize transmission rate of MIMO VLC system.Simulation results show that more discrete points are needed to achieve the channel capacity as SNR increases.Both the upper and lower bounds of channel capacity are tight at low SNR region.In addition,comparing the equal power allocation,the proposed power allocation scheme can significantly increase the rate for the low-order modulation inputs.

HY-PC:Enabling Consistent Positioning and Communication Using Visible Light

Visible light(VL)plays an important role in achieving high-precision positioning and low bit error radio(BER)data communication.However,most VL-based systems can not achieve positioning and communication,simultaneously.There are two problems:1)the hybrid systems are difficult to extract distinguishable positioning beacon features without affecting communication performance,2)in the hybrid systems,the lost data bits in the inter-frame gap(IFG)are hard to recover,which affects positioning and communication performance.Therefore,in this article,we propose a novel VL-based hybrid positioning and communication system,named HY-PC system,to solve the above problems.First,we propose the robust T-W mapping for recognizing specific Light Emitting Diodes(LEDs),which can provide stable LED recognition accuracy without adding extra beacon data and does not decrease the communication rate.Furthermore,we also propose the novel linear block coding and bit interleaving mechanism,which can recover the lost data bits in the IFG and improve data communication performance.Finally,we use commercial off-the-shelf devices to implement our HY-PC system,extensive experimental results show that our HY-PC system can achieve consistent high-precision positioning and low-BER data communication,simultaneously.

Visible Light Communication for Vehicular Applications: A Novel Architecture with Proof-of-Concept Prototype

When there is an increasing interest in visible light communication(VLC), outdoor vehicle VLC has emerged as a promising candidate technology for future intelligent transportation systems. However, in VLC based vehicular applications, several challenges impede successful commercial application of VLC based products. This article first provides a thorough overview of the existing challenges. To overcome these challenges, we propose a novel architecture with tracking and environment sensing ability for practical vehicular applications. Moreover, a proof-ofconcept prototype is implemented to validate the feasibility of the proposed system. Experimental and simulation results show that the proposed VLC system can provide reliable communications with a bit-error rate less than 10-4for vehicles under strong interference lights. Finally, based on the evaluations, we propose some key design issues for future studies in this research area.

Characteristic of Line-of-Sight in Infrastructure-to-Vehicle Visible Light Communication Using MIMO Technique

Visible Light Communication(VLC)technology is aggressive research for the next generation of communication.Currently,Radio Frequency(RF)communication has crowed spectrum.An Intelligent Transportation System(ITS)has been improved in the communication network for Vehicle-to-Vehicle(V2 V),Vehicle-to-Infrastructure(V2I),and Infrastructure-to-Vehicle(I2V)by using the visible light spectrum instead of the RF spectrum.This article studies the characterization of Line-of-Sight(LOS)optical performance in an Outdoor Wireless Visible Light Communication(OWVLC)system employing a Multiple-Input Multiple-Output(MIMO)technique for I2V communications in ITS regulations.We design the new configuration of the OWVLC-I2V system,which is an alternative approach to communication for I2V system at nighttime.The results show the Channel Impulse Response(CIR)of the LOS links in visible light communication for I2V system in ITS by investigating the receiver on the vehicle moving along the coverage communication area.Furthermore,the OWVLC-I2V system using the MIMO technique depicts the performance of throughput and Bit Error Rate(BER)vs.vehicle speed while the vehicle passes a street light.

Modelling and Performance Analysis of Visible Light Communication System in Industrial Implementations

Visible light communication(VLC)has a paramount role in industrial implementations,especially for better energy efficiency,high speed-data rates,and low susceptibility to interference.However,since studies on VLC for industrial implementations are in scarcity,areas concerning illumination optimisation and communication performances demand further investigation.As such,this paper presents a new modelling of light fixture distribution for a warehouse model to provide acceptable illumination and communication performances.The proposed model was evaluated based on various semi-angles at half power(SAAHP)and different height levels for several parameters,including received power,signal to noise ratio(SNR),and bit error rate(BER).The results revealed improvement in terms of received power and SNR with 30 Mbps data rate.Various modulations were studied to improve the link quality,whereby better average BER values of 5.55×10^(−15) and 1.06×10^(−10) had been achieved with 4 PAM and 8 PPM,respectively.The simulation outcomes are indeed viable for the practical warehouse model.

Stable yellow light emission from lead-free copper halides single crystals for visible light communication

Yellow light-emitting diodes(LEDs) as soft light have attracted abundant attention in lithography room, museum and art gallery. However, the development of efficient yellow LEDs lags behind green and blue LEDs, and the available perovskites yellow LEDs suffer from the instability. Herein, a pressure-assisted cooling method is proposed to grow lead-free CsCu2I3single crystals, which possess uniform surface morphology and enhanced photoluminescence quantum yield(PLQY) stability, with only 10% PLQY losses after being stored in air after 5000 h.Then, the single crystals used for yellow LEDs without encapsulation exhibit a decent Correlated Color Temperature(CCT) of 4290 K, a Commission Internationale de l’Eclairage(CIE) coordinate of(0.38, 0.41), and an excellent 570-h operating stability under heating temperature of 100°C. Finally, the yellow LEDs facilitate the application in wireless visible light communication(VLC), which show a-3 dB bandwidth of 21.5 MHz and a high achievable data rate of 219.2 Mbps by using orthogonal frequency division multiplexing(OFDM) modulation with adaptive bit loading. The present work not only promotes the development of lead-free single crystals, but also inspires the potential of CsCu2I3in the field of yellow illumination and wireless VLC.

Intelligent MRI Room Design Using Visible Light Communication with Range Augmentation

Radio waves and strong magneticfields are used by Magnetic Reso-nance Imaging(MRI)scanners to detect tumours,wounds and visualize detailed images of the human body.Wi-Fi and other medical devices placed in the MRI procedure room produces RF noise in MRI Images.The RF noise is the result of electromagnetic emissions produced by Wi-Fi and other medical devices that interfere with the operation of the MRI scanner.Existing techniques for RF noise mitigation involve RF shielding techniques which induce eddy currents that affect the MRI image quality.RF shielding techniques are complex and lead to RF leak-age.VLC(Visible light Communication)is an emerging and efficient technology to avoid RF interference near MRI scanners.Range augmentation with power conservation of the LED is a big challenge in existing VLC systems.The major objective of the proposed work is to develop an intelligent-MRI room design without RF interference using visible light communication and enhance the distance between VLC transmitter and VLC receiver.In this paper,it is proposed to implement VLC using On-Off keying modulation and enhance distance using large active area photodiodes with Automatic Gain Control Circuit(AGC)using software and hardware.The performance of the proposed intelligent MRI-VLC system is analyzed by calculating Bit Error Rate at an inclined distance of 50 cm away from line of sight of the LED.The Experimental results showed that the maximum distance achieved was 400 cm at Bit Error Rate(BER)of 1.5×10^(-5).

Optimizing Optical Attocells Positioning of Indoor Visible Light Communication System

Visible light communication(VLC),which is a prominent emerging solution that complements the radio frequency(RF)technology,exhibits the potential to meet the demands of fifth-generation(5G)and beyond technologies.The random movement of mobile terminals in the indoor environment is a challenge in the VLC system.The model of optical attocells has a critical role in the uniform distribution and the quality of communication links in terms of received power and signal-to-noise ratio(SNR).As such,the optical attocells positions were optimized in this study with a developed try and error(TE)algorithm.The optimized optical attocells were examined and compared with previous models.This novel approach had successfully increased minimum received power from−1.29 to−0.225 dBm,along with enhanced SNR performance by 2.06 dB.The bit error rate(BER)was reduced to 4.42×10−8 and 6.63×10−14 by utilizing OOK-NRZ and BPSK modulation techniques,respectively.The optimized attocells positions displayed better uniform distribution,as both received power and SNR performances improved by 0.45 and 0.026,respectively.As the results of the proposed model are optimal,it is suitable for standard office and room model applications.

Mitigation of inter-cell interference in visible light communication

This paper proposes the orthogonal and nonorthogonal schemes in the interference environments for visible light communication（ VLC） systems. The proposed schemes pay attention to the case when different bit streams from multiple cells are simultaneously transmitted, which consequently causes inter-cell interference（ ICI） and greatly deteriorates the bit error rate（ BER） and channel capacity performance of the system. The performance of the newdeveloped multi-cell system in indoor VLC systems is evaluated. The bipolar phase shift keying（ BPSK） modulation scheme with orthogonal pulses（ OPs） for multiple cells environments is employed to mitigate the ICI problem and improve the BER and channel capacity performances. Since the use of different OPs in each cell requires more number of OPs, which requires high bandwidth, OPs are reused at certain distances. Three different schemes, which are OPs,orthogonal and non-orthogonal pulses（ NOP） reuse, are compared. This paper investigates the impact of using these schemes and compared their performances in the ICI environments. The BER and channel capacity using the proposed schemes are comprehensively examined. Simulation and theoretical results showthat the OPs schemes are more effective in the interference areas of the room and significantly outperform NOP.

The Research of Indoor Positioning Based on Visible Light Communication

The key techniques in indoor positioning based on visible light communication and the state of the art of this research were surveyed. First, the significance of indoor positioning based on visible light communication from two aspects of the limitations of current indoor positioning technology and the advantages of visible light communication was discussed; And then, the main four technology of indoor positioning based on visible light communication were summarized and the triangulation of RSS method and the principle of image positioning were introduced in detail; Next, the performance characteristics of various typical algorithms were compared and analyzed; In the end, several suggestions on future research of indoor positioning based on visible light communication were given.

A General Channel Model for Visible Light Communications in Underground Mines

In underground mines, visible light communication(VLC) system is a promising method to realize effective communication,which supports communication and illumination at the same time. Therefore, adequate research of underlying physical propagation phenomenon should be carried out to realize VLC system in underground mines. To design VLC system and evaluate its performance, accurate and efficient channel models, including large-scale fading and scattering characteristics, are needed to be established. However,the characteristics of the underlying VLC channels about fading and scattering have not been sufficiently investigated yet. In this paper, a path loss channel model, based on the recursive model, is proposed precisely. Its path loss exponent is determined by three different trajectories, which is studied in the mining roadway and working face environment. Besides, the shadowing effect for VLC has been modelled by a Bimodal Gaussian distribution in underground mines. Considering the number of transmitters in line-of-sight(Lo S) as well as non-line-of-sight(NLo S) scenarios,our simulation illustrates the fact that, as the curve fitting technique is employed, the path loss displays a linear behavior in log-domain.The path loss expression is derived, it is related to the distance. Finally, root mean square(RMS) delay spread and Mie scattering in underground mines are analyzed.

Robust Artificial Noise-Aided Beamforming for A Secure MISO-NOMA Visible Light Communication System

Visible light communication(VLC)and non-orthogonal multiple access(NOMA)have been deemed two promising techniques in the next wireless communication networks.In this paper,secure communications in the presence of potential eavesdropper are investigated for a multiple-input single-output VLC system with NOMA.The artificial noise jamming and beamforming technologies are applied to improve secure performance.A robust resource allocation scheme is proposed to minimize the total transmit power taking into account the constraints on the quality of service requirement of the desired users and the maximum tolerable data rate of the eavesdropper,and the practical imperfect channel state information of both the desired users and the eavesdropper.The formulated non-convex optimization problem is tackled based onS-Procedure and semi-definite programming relaxation.Simulation results illustrate that our proposed resource allocation scheme can effectively guarantee communication security and achieve transmit power saving.Moreover,the height and number of LED can significantly affect system performance and the optimum LED height can be obtained for different LED numbers.

Symbol Error Rate Performance Analysis of Non-Orthogonal Multiple Access for Visible Light Communications

Non-orthogonal multiple access(NOMA) is considered as one of promising radio access techniques for visible light communications(VLC) in next-generation wireless communications systems.In order to provide theoretical support for designing VLC-NOMA,we derive its analytic expressions for the symbol error rate(SER).Specifically,NOMA is first incorporated with appropriate VLC to establish a VLC-NOMA framework.Afterwards,mathematical expressions of the SER for the VLC-NOMA are developed.Moreover,numerical results are provided carefully to demonstrate that the proposed VLC-NOMA scheme outperforms than state-of-the-art orthogonal frequency division multiple access(OFDMA) one in terms of SER performance.Finally,relationships between the SER performance and the number of users,power allocation coefficient and semi-angle are well investigated,which can give us a scientific guide to devise the VLC-NOMA system for achieving better SER performance.

Free-Space Optical communication using visible light

The possibility of visible red light laser being used as signal light source for Free-Space Optical (FSO) communication is proposed. Based on analysis of transmission in atmospheric channel concerning 650 nm laser beam, performance of wireless laser communication link utilizing a low power red laser diode was evaluated. The proposed system can achieve a maximum range of 300 m at data rate 100 Mb/s theoretically. An experimental short-range link at data rate 10 Mb/s covering 300 m has been implemented in our university. It is feasible to enhance the system performance such as link range and data rate by increasing transmitting power and decreasing laser beam divergence angle or through other approaches.

Separate Least Mean Square Based Equalizer with Joint Optimization for Multi-CAP Visible Light Communication

Visible light communication(VLC) is expected to be a potential candidate of the key technologies in the sixth generation(6G) wireless communication system to support Internet of Things(IoT) applications. In this work, a separate least mean square(S-LMS) equalizer is proposed to compensate lowpass frequency response in VLC system. Joint optimization is employed to realize the proposed S-LMS equalizer with pre-part and post-part by introducing Lagrangian. For verification, the performance of VLC system based on multi-band carrier-less amplitude and phase(m-CAP) modulation with S-LMS equalizer is investigated and compared with that without equalizer,with LMS equalizer and with recursive least squares(RLS)-Volterra equalizer. Results indicate the proposed equalizer shows significant improved bit error ratio(BER) performance under the same conditions. Compared to the RLS-Volterra equalizer, SLMS equalizer achieves better performance under low data rate or high signal noise ratio(SNR) conditions with obviously lower computational complexity.

Real-time Audio &Video Transmission System Based on Visible Light Communication

With the increasing popularity of solid sate lighting devices, Visible Light Communication (VLC) is globally recognized as an advanced and promising technology to realize short-range, high speed as well as large capacity wireless data transmission. In this paper, we propose a prototype of real-time audio and video broadcast system using inexpensive commercially available light emitting diode (LED) lamps. Experimental results show that real-time high quality audio and video with the maximum distance of 3 m can be achieved through proper layout of LED sources and improvement of concentration effects. Lighting model within room environment is designed and simulated which indicates close relationship between layout of light sources and distribution of illuminance.

Design and Analysis of Traffic Information Transmission System Based on Visible Light Communication

Visible Light Communication( VLC) based on LED is a new wireless communication technology with high response rate and good modulation characteristics in the wavelengths of 380- 780 nm. Compared with conventional methods,the waveband of VLC is harmless to human and safe to communication because of no magnetism radiation. An audio information transmission system using LED traffic lights is presented based on VLC technology. The system is consisted of transmitting terminal,receiving terminal and communication channel. Some experiments were made under real communication environment. The experimental results showed that the traffic information transmission system works steadily with good communication quality and achieves the purpose of transmitting audio information through LED traffic lights,with a data transfer rate up to 250 kbps over a distance of 5 meters.