Thermo-Economic Performance of Geothermal Driven High-Temperature Flash Tank Vapor Injection Heat Pump System:A Comparison Study

Process heating constitutes a significant share of final energy consumption in the industrial sector around the world.In this paper,a high-temperature heat pump(HTHP)using flash tank vapor injection technology(FTVI)is proposed to develop low-temperature geothermal source for industrial process heating with temperature above 100°C.With heat sink output temperatures between 120°C and 150°C,the thermo-economic performance of the FTVI HTHP system using R1234ze(Z)as refrigerant is analyzed and also compared to the single-stage vapor compression(SSVC)system by employing the developed mathematical model.The coefficient of performance(COP),exergy efficiency(ηexe),net present value(NPV)and payback period(PBP)are used as performance indicators.The results show that under the typical working conditions,the COP andηexe of FTVI HTHP system are 3.00 and 59.66%,respectively,and the corresponding NPV and PBP reach 8.13×106 CNY and 4.13 years,respectively.Under the high-temperature heating conditions,the thermo-economic performance of the FTVI HTHP system is significantly better than that of the SSVC system,and the larger the temperature lift,the greater the thermo-economic advantage of the FTVI HTHP system.Additionally,the FTVI HTHP system is more capable than the SSVC system in absorbing the financial risks associated with changes of electricity price and natural gas price.

Preparation of ZrB_2 Ceramics by Self-propagating High-temperature Synthesis and Hot Pressing Sintering

ZrB2 ceramics were prepared by self-propagating high-temperature synthesis（SHS） and were sintered by hot pressing（HP）.The effects of the granularities and doses of raw materials in Zr-B2O3-Mgon SHS process and product were investigated.XRD and combustion temperature curves prove that the ideal SHS reactants of Zr-B2O3-Mg are 50μm Zr powder,75μm B2O3 powder and 400μm Mg powder with 45% excessive.The particle sizes of SHS product,acid-leached product,sintered product are 2-5μm,0.5-2μm,2-10μm respectively.Chemical analysis indicates that the acid-leached product consists of ZrB2（94.59%）,ZrO2（3.87%）,and H3BO3（1.54%）,The sintered product has a relative density of 95.4%.

Effect of hot isostatic pressure on the microstructure and tensile properties of γ'-strengthened superalloy fabricated through induction-assisted directed energy deposition

The microstructure characteristics and strengthening mechanism of Inconel738LC(IN-738LC) alloy prepared by using induction-assisted directed energy deposition(IDED) were elucidated through the investigation of samples subjected to IDED under 1050℃ preheating with and without hot isostatic pressing(HIP,1190℃,105 MPa,and 3 h).Results show that the as-deposited sample mainly consisted of epitaxial columnar crystals and inhomogeneously distributed γ’ phases in interdendritic and dendritic core regions.After HIP,grain morphology changed negligibly,whereas the size of the γ’ phase became increasingly even.After further heat treatment(HT,1070℃,2 h + 845℃,24 h),the γ’ phase in the as-deposited and HIPed samples presented a bimodal size distribution,whereas that in the as-deposited sample showed a size that remained uneven.The comparison of tensile properties revealed that the tensile strength and uniform elongation of the HIP + HTed sample increased by 5% and 46%,respectively,due to the synergistic deformation of bimodal γ’phases,especially large cubic γ’ phases.Finally,the relationship between phase transformations and plastic deformations in the IDEDed sample was discussed on the basis of generalized stability theory in terms of the trade-off between thermodynamics and kinetics.

A thermal stress loading technique for large-sized hot dry rock mechanical tests

Testing of large-sized specimens is becoming increasingly important in deep underground rock mechanics and engineering.In traditional mechanical loading,stresses on large-sized specimens are achieved by large host frames and hydraulic pumps,which could lead to great investment.Low-cost testing machines clearly always have great appeal.In this study,a new approach is proposed using thermal expansion stress to load rock specimens,which may be particularly suitable for tests of deep hot dry rock with high temperatures.This is a different technical route from traditional mechanical loading through hydraulic pressure.For the rock mechanics test system of hot dry rock that already has an investment in heating systems,this technology may reduce the cost of the loading subsystem by fully utilizing the temperature changes.This paper presents the basic principle and a typical design of this technical solution.Preliminary feasibility analysis is then conducted based on numerical simulations.Although some technical details still need to be resolved,the feasibility of this loading approach has been preliminarily confirmed.

Research on microstructure and high-temperature friction and wear properties of a cobalt-based alloy for hot extrusion die

The hot extrusion die is a key tool for determining the surface quality and dimensional accuracy of extruded products.Because its service process is subject to high temperature,high pressure,and wear,it must be resistant to these conditions.In this paper,the high-temperature friction and wear properties of a cobalt(Co)-based alloy were investigated and compared with those of a titanium carbide(TiC)cemented material.The results show that the high-temperature wear performance of the Co-based alloy is better than that of the TiC cemented material,and that Co-based materials have the potential for replacing TiC cemented materials as hot-extrusion-die materials.Due to the high density and good combination of the matrix and carbide,the carbides do not easily peel off from the matrix during the wear process.Due to the higher impact toughness of the Co-based alloys,microcracks that can cause worn-surface peeling are not easily generated.As a result,the high-temperature wear performance of Co-based alloys is found to be better than that of TiC cemented materials.

Study on Processing of Clear Banana Juice Using Hot Water Extraction Method

In this study, the effects of hot water temperature on clarity, total soluble solids, polyphenol oxidase （PPO） and color of banana juice during hot water ex-traction were discussed based on the theory in which heat treatment might induce the pectin and protein in banana pulp to form insoluble products. The results showed the hot water temperature had a significant effect on the formation of insol-uble polymers in banana pulp from pectin and protein. In 75 ℃ water, the pectin and protein in banana pulp were most inclined to form insoluble products. Under this condition, the clarity of banana juice was also highest. The light transmittance at 660 nm was close to 90%. In the banana juice, extracted by 75 ℃ water, the pectin and protein contents were lowest, and they were lower than 7.3 mg/100 ml and 12.9 mg/100 ml respectively. The 75 ℃ water could not inactivate completely the pectin in banana pulp due to its high heat resistance, Therefore, 0.05% L-cys-teine or ascorbic acid needed to be added into banana pulp to inhibit the browning of juice induced by residual PPO.

Magnetite-Fluorite Rock:A New Rock Type of Hot Water Sedimentation

The new type hot water sedimentary rock -- magnetite-fluorite rock occurs as quasi-layers in flat parts of contact zones between rock body and strata in Bamianshan of Changshan County, Zhejiang Province, China. The main mineral assemblage is fluorite＋magnetite＋cassiterite. The rock shows typical laminated structure and obvious mosaic texture. Its formation temperature is between 123℃-160℃, averaging at 142℃. The major chemical composition of the rock includes CaF2, SiO2, Al2O3, FeO, and Fe2O3; the high-content microelement association includes W, Sn, Be, Rb, Sr, S, and CI; and the total content of REE is low （∑REE between 35.34×10^-6-38.35×10^-6）, showing LREE enrichment type of distribution pattern. Diagenesis： driven by the tectonic stress, the formation water heated in the deep strata had moved along the fissures or fractures in strata and had extracted components from the strata on the way, and finally stagnated in the flat parts of contact zones between rock body and strata. With drop in temperature, magnetite and fluorite were separated from the hot water and precipitated alternately, forming this hot water sedimentary rock with new type mineralogical composition, typical laminated structure, obvious mosaic texture and sub-horizontal occurrence. The characteristics of the new type mineralogical composition, sedimentary tectonic environment and chemical composition are different from that of the well-known traditional hydrothermai sedimentary rocks.

Application of Cooling Water in Controlled Runout Table Cooling on Hot Strip Mill

The controlled runout table cooling is essential in determining the final mechanical properties and flatness of steel strip.The heat of a hot steel strip is mainly extracted by cooling water during runout.In order to study the heat transfer by water jet impingement boiling during runout,apilot facility was constructed at the University of British Columbia.On this pilot facility,the water jet impingement tests were carried out under various cooling conditions to investigate the effect of processing parameters,such as cooling water temperature,water jet impingement velocity,initial strip temperature,water flow rate,water nozzle diameter and array of water nozzles,on the heat transfer of heated strip.The results obtained contribute to the optimization of cooling water during runout.

Energy and exergy recovery from exhaust hot water using organic Rankine cycle and a retrofitted configuration

Exhaust hot water （EHW） is widely used for various industrial processes. However, the excess heat carried by EHW is typically ignored and discharged into the environment, resulting in heat loss and heat pollution. An organic Rankine cycle （ORC） is an attractive technology to recycle heat from low-temperature energy carriers. Herein, ORC was used to recycle the heat carried by EHW. To investigate the energy and exergy recovery effects of EHW, a mathematical model was developed and a parametric study was conducted. The energy efficiency and exergy efficiency of the EHW-driven ORC system were modeled with R245fa, Rl13 and R123 as the working fluids. The results demonstrate that the EHW and evaporation temperatures have significant effects on the energy and exergy efficiencies of the EHW-driven ORC system. Under given EHW conditions, an optimum evaporation temperature exists corresponding to the highest exergy efficiency. To further use the low-temperature EHW, a configuration retrofitted to the ORC by combining with flash evaporation （FE） was conducted. For an EHW at 120 ~C and 0.2 MPa, the maximum exergy efficiency of the FE-ORC system is 45.91% at a flash pressure of 0.088 MPa. The FE-ORC performs better in exergy efficiency than the basic FE and basic EHW-driven ORC.

IMPACT OF WATER ENVIRONMENTAL CHARACTERISTICS IN DRY-HOT VALLEY OF JINSHA RIVER ON SOIL DESERTIFICATION

Based on the field investigation and the analysis of soil moisture curve, it is clearly shown that there is a positive relationship between vegetation coverage rate and soil moisture capacity and soil depth in dry hot valley of the Jinsha River, and also there is a desertification process with seasonality. It is suggested that the basic factor of desertification in the area is water deficiency (seasonal drought and low soil water capacity) and the direct dynamic of desertification is soil erosion. Some effective countermeasures are presented, of which water saving planting and irrigation techniques should be firstly applied in the studied area.

Flexibility Prediction of Aggregated Electric Vehicles and Domestic Hot Water Systems in Smart Grids

With the growth of intermittent renewable energy generation in power grids,there is an increasing demand for controllable resources to be deployed to guarantee power quality and frequency stability.The flexibility of demand response(DR)resources has become a valuable solution to this problem.However,existing research indicates that problems on flexibility prediction of DR resources have not been investigated.This study applied the temporal convolution network(TCN)-combined transformer,a deep learning technique to predict the aggregated flexibility of two types of DR resources,that is,electric vehicles(EVs)and domestic hot water system(DHWS).The prediction uses historical power consumption data of these DR resources and DR signals(DSs)to facilitate prediction.The prediction can generate the size and maintenance time of the aggregated flexibility.The accuracy of the flexibility prediction results was verified through simulations of case studies.The simulation results show that under different maintenance times,the size of the flexibility changed.The proposed DR resource flexibility prediction method demonstrates its application in unlocking the demand-side flexibility to provide a reserve to grids.

Friction Behaviors of the Hot Filament Chemical Vapor Deposition Diamond Film under Ambient Air and Water Lubricating Conditions

The friction behavior of the hot filament chemical vapor deposition（HFCVD） diamond film plays a critical role on its applications in mechanical fields and largely depends on the environment. Studies on the tribological properties of HFCVD diamond films coated on Co-cemented tungsten carbide （WC-Co） substrates are rarely reported in available literatures, especially in the water lubricating conditions. In this paper, conventional microcrystalline diamond（MCD） and fine-grained diamond（FGD） films are deposited on WC-Co substrates and their friction properties are evaluated on a reciprocating ball-on-plate tribometer, where they are brought to slide against ball-bearing steel and copper balls in dry and water lubricating conditions. Scanning electron microscopy（SEM）, atomic force microscopy（AFM）, surface profilometer and Raman spectroscopy are adopted to characterize as-deposited diamond films; SEM and energy dispersive X-ray（EDX） are used to investigate the worn region on the surfaces of both counterface balls and diamond films. The research results show that the friction coefficient of HFCVD diamond films always starts with a high initial value, and then gradually transits to a relative stable state. For a given counterface and a sliding condition, the FGD film presents lower stable friction coefficients by 0.02-0.03 than MCD film. The transferred materials adhered on sliding interface are supposed to have predominate effect on the friction behaviors of HFCVD diamond films. Furthermore, the effect of water lubricating on reducing friction coefficient is significant. For a given counterpart, the stable friction coefficients of MCD or FGD films reduce by about 0.07-0.08 while sliding in the water lubricating condition, relative to in dry sliding condition. This study is beneficial for widespread applications of HFCVD diamond coated mechanical components and adopting water lubricating system, replacing ofoil lubricating, in a variety of mechanical processing fields to implement the green production process.

Heating of heavy oil by circulating hot water in closed double casing in ultra-deep wells

In heavy oil production,the loss of energy to ambient surroundings decreases the temperature of the heavy oil flowing upwards in a vertical wellbore,which increases the oil viscosity and the oil may not flow normally in the wellbore.Therefore,it is necessary to lower the heavy oil viscosity by heating methods to allow it to be lifted easily.Heating of heavy oil in an oil well is achieved by circulating hot water in annuli in the well（tubing-casing annulus,casing-casing annulus）.In this paper,based on heat transfer principles and fluid flow theory,a model is developed for produced fluids and hot water flowing in a vertical wellbore.The temperature and pressure of produced fluids and hot water in the wellbore are calculated and the effect of hot water on heavy oil temperature is analyzed.Calculated results show that the hot water circulating in the annuli may effectively heat the heavy oil in the tubing,so as to significantly reduce both oil viscosity and resistance to oil flow.

Energy efficiency performance of multi-energy district heating and hot water supply system

A district heating and hot water supply system is presented which synthetically utilizes geothermal energy,solar thermal energy and natural gas thermal energy.The multi-energy utilization system has been set at the new campus of Tianjin Polytechnic University(TPU),A couple of deep geothermal wells which are 2 300 m in depth were dug,Deep geothermal energy cascade utilization is achieved by two stages of plate heat exchangers(PHE) and two stages of water source heat pumps(WSHP).Shallow geothermal energy is used in assistant heating by two ground coupled heat pumps(GCHPs) with 580 vertical ground wells which are 120 m in depth.Solar thermal energy collected by vacuum tube arrays(VTAs) and geothermal energy are complementarily utilized to make domestic hot water.Superfluous solar energy can be stored in shallow soil for the GCHP utilization.The system can use fossil fuel thermal energy by two natural gas boilers(NGB) to assist in heating and making hot water.The heating energy efficiency was measured in the winter of 2010-2011.The coefficients of performance(COP) under different heating conditions are discussed.The performance of hot water production is tested in a local typical winter day and the solar thermal energy utilization factor is presented.The rusults show that the average system COP is 5.75 or 4.96 under different working conditions,and the typical solar energy utilization factor is 0.324.

Synergistic Influence of Pre-Harvest Calcium Sprays and Postharvest Hot Water Treatment on Fruit Firmness, Decay, Bitter Pit Incidence and Postharvest Quality of Royal Delicious Apples (<i>Malus x domestica</i>Borkh)

Experiments were conducted to observe the effect of pre-harvest calcium (Ca) applied as calcium chloride (1% W/V) and postharvest hot water treatment (HWT) on “Royal Delicious” apples. For this, apples were divided in 4 lots viz., untreated (neither Ca nor HWT), Ca alone (pre-harvest 3 sprays of CaCl2 (1.0% w/v) in the orchard), HWT (42℃ for 2 h). Apples of all four lots were stored in cold storage maintained at 0℃ ± 1℃ and 90% - 95% relative humidity for 6 months. After storage, fruits were removed to ambient conditions for 5 days, and then observations on decay area and incidence, bitter pit incidence, fruit Ca content, lipoxygenase (LOX) and antioxidant (AOX) activity, fruit firmness and fruit quality parameters were recorded. After 6 months in cold storage plus 5 day at 22℃ ± 2℃ and 70% + 4% RH, apples, which received Ca as pre-harvest spray or those which received postharvest hot water treatment or Ca + HWT had significantly lesser decay area (decay lesions) caused by Penicillium expansum or Botrytis cinerea than untreated ones (control). Ca + HWT treatment was significantly more effective on B. cinerea than P. expansum. Untreated apples exhibited higher incidence of bitter pit (18.2%) than those treated with Ca or HWT or both. Fruit Ca content (2.92% DM) were significantly lower and conversely the LOX activity (6.9 μmoles min–1×g–1FW) was higher in untreated apples. Similarly, total phenolics and AOX activity were also lower in the untreated apples than Ca or HWT treated. HWT or Ca treated apples have beneficial effects on fruit firmness, peel colour and quality parameters like TSS and ascorbic acid content. Thus, it is concluded that pre-harvest sprays of calcium chloride with postharvest HWT is highly useful for “Royal Delicious” for reducing decay loss, maintaining firmness, high levels of antioxidants and fruit quality.

The Hot Water Oil Expulsion Technique for Geothermal Resources

With the rapid development of Chinese petroleum industry, Oil production way of burning crude oil to produce steam need change. Heavy oil reservoir with thin layer or edgewater is unsuitable thermal recovery, electric heating leads to considerable electrical consumption, low injection water temperature decreases reservoir temperature and increased crude oil viscosity. The prolonged temperature difference break up reservoir pore throat cement and framework minerals. To improve high-capacity channel communication, we proposed geothermal oil recovery. Broad-sense abundant geothermal resources and existing injection water technique equipment are used, deep-seated high temperature liquid (oil-gas-water mixture) draws geothermal warming flowing layer to transit heat upward, decreases viscidity and increases fluidity. Reservoir temperature different offer geothermal fountain. Practicability process is analyzed. statistics and reservoir temperature variation analysis of Gudong Oilfield, Shengli Oilfield Company, SINOPEC, we have designed flow-chart concept for geothermal oil recovery, suggested drilling multi-branch well in heavy oil reservoir as injection-well, at the same position of geothermal fountain well, using free-pressure pump to inject hot liquid directly to aimed oil layer, made oil recovery in surrounding wells. It is proposed that geothermal oil recovery forerunner test should be first conducted in favorable blocks.

Contribution to the Study of Hot Water Scaling Phenomenon in the South of Touristic Area in Agadir City

This work aims to study the phenomenon of scaling observed in the hot water pipelines in the southern seaside touristic installations of Agadir city. This phenomenon has led to the formation of solid deposits and adherents to the internal walls of the facilities of the hot water. This deposit is at the origin of several technical, economic and environmental problems. It causes a decrease in the lifetime of boilers and a reduction of thermal exchanges and consequently a decrease in the energy efficiency of heating systems. In the present study, the samples of scale have been carried out at different points of hot water pipelines. The characterization of different scale samples recovered was conducted by X-ray fluorescence (XRF), elemental analysis (CHNS-O), infrared spectrometry (IR), thermogravimetric analysis (TGA), differential thermal analysis (DTA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Analytical results showed that scale samples collected on different sites in touristic hot water system are mostly formed by calcium carbonate. Thermodynamic conditions in the site were favourable to the aragonite variety formation.

In Vitro Antioxidant Activity of Hot Water Extracts from 7 Different Sources of Ganoderma Lucidum

[Objectives] To study the in vitro antioxidant activity of hot water extracts from 7 different sources of Ganoderma lucidum mushroom.[Methods] The in vitro antioxidant activity of hot water extracts from 7 different sources of G. lucidum was studied from total reducing capacity,scavenging of hydroxyl free radical( ·OH),superoxide anion( O_2^(2-)·),and DPPH free radical.[Results]Under the same concentration,hot water extracts wild G. lucidum in Maoer Mountain showed the strongest reducing capacity with the absorbency being 2. 48,the highest scavenging capacity of hydroxyl free radical( · OH) with the scavenging rate being 99. 46%,and the strongest scavenging ability of DPPH free radical with its scavenging rate being 96. 62%. The ability of scavenging superoxide anion free radical( O_2^(2-)·) ranked the third.[Conclusions]The hot water extracts from Maoer Mountain wild G. lucidum showed the highest antioxidant ability in three aspects,indicating that Maoer Mountain wild G. lucidum has high development potential.

Geochemical evaluation of low salinity hot water injection to enhance heavy oil recovery from carbonate reservoirs

Although low salinity water injection(LSWI) has recovered residual oil after the conventional waterflood, highly viscous oil has remained in heavy oil reservoirs. Hot water injection is an economic and practical method to improve oil mobility for viscous oil reservoirs. It potentially controls temperature-dependent geochemical reactions underlying the LSWI mechanism and oil viscosity. Therefore, this study has modeled and evaluated a hybrid process of low salinity hot water injection(hot LSWI) to quantify synergistic effects in heavy oil reservoirs. In comparison to seawater injection(SWI) and LSWI, hot LSWI results in more cation ion-exchange(Ca^(2+) and Mg^(2+)) and more wettability modification. Hot LSWI also reduces oil viscosity. In core-scaled systems, it increases oil recovery by 21% and 6% over SWI and LSWI. In a pilotscaled reservoir, it produces additional oil by 6% and 3% over SWI and LSWI. Probabilistic forecasting with uncertainty assessment further evaluates the feasibility of hot LSWI to consider uncertainty in the pilot-scaled reservoir and observes enhanced heavy oil production. This study confirms the viability of hot LSWI due to synergistic effects including enhanced wettability modification and oil viscosity reduction effects.

Changes in Soil Hot-Water Extractable C,N and P Fractions During Vegetative Restoration in Zhifanggou Watershed on the Loess Plateau

The study was conducted in Zhifanggou Watershed,Shaanxi Province,China,to evaluate the effect of different vegetation types on hot-water extractable C,N and P fractions,with the aim to determine whether hot-water extractable fractions could be used as indicators of soil quality change in Loess Plateau.The six vegetation types established in 1975 were（i） Robinia pseudoacacia L.,（ii） Caragana korshinkii Kom.,（iii） Pinus tabulaeformis Carr.,（iv） P.tabulaeformis-Amorpha fruticosa L.,（v） R.pseudoacacia-A.fruticosa,and（vi） grassland.A cropped hillslope plot and a Platycladus orientalis L.native forest plot were used as references.The results indicated that the conversion of native forest to cropland resulted in a significant decline in the hot-water extractable C,N and P fractions.Hot-water extractable C,N,and P increased when cultivated land was revegetated,but after 30 years the amount of hot-water extractable C,N,and P in revegetated fields was still much lower compared to native forest.Hot-water extractable fractions increased more under mixed-forest than under pure-forest stands.Furthermore,there was a significant correlation between the hot-water extractable fractions and soil chemical and microbiological properties.The results showed that hot-water extractable fractions could be used as indicators of soil quality change on the Loess Plateau.