The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the...The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the most efficient non-induction device can heat the plasma and drive the plasma current has been efficiently in operation 'owl and a particular design of the 2.8 MW/-35 kV high-voltage DC power supply has been already completed and will apply to the klystron of LHCD on HT-7 and the future HT-7U, and the project of the power supply has been examined and approved professionally by an authorized group of high-level specialist in the institute of Plasma Physics. The detailed design of the power supply and the simulation results are referred in the paper.展开更多
A novel DC traction power supply system suitable for energy feeding and de-icing is proposed in this paper for an urban rail transit catenary on the basis of the full bridge submodule (FBSM) modular multilevel convert...A novel DC traction power supply system suitable for energy feeding and de-icing is proposed in this paper for an urban rail transit catenary on the basis of the full bridge submodule (FBSM) modular multilevel converter (MMC). The FBSM-MMC is a novel type of voltage source converter (VSC) and can directly control the output DC voltage and conduct bipolar currents, thus flexibly controlling the power flow of the urban rail transit catenary. The proposed topology can overcome the inherent disadvantages of the output voltage drop in the diode rectifier units, increase the power supply distance and reduce the number of traction substations. The flexible DC technology can coordinate multiple FBSM-MMCs in a wide area and jointly complete the bidirectional control of catenary power flow during the operation of the electric locomotive, so as to realize the local consumption and optimal utilization of the recovered braking energy of the train. In addition, the FBSM-MMCs can also adjust the output current when the locomotive is out of service to prevent the catenary from icing in winter. The working modes of the proposed topology are illustrated in detail and the control strategy is specially designed for normal locomotive operations and catenary de-icing. Simulation cases conducted by PSCAD/EMTDC validate the proposed topology and its control strategy.展开更多
To meet the stringent requirements of the fusion power supply for large-scale fusion devices,the J-TEXT engineering team has carried out key technology research and applications in several important directions of fusi...To meet the stringent requirements of the fusion power supply for large-scale fusion devices,the J-TEXT engineering team has carried out key technology research and applications in several important directions of fusion power supply.This article presents the advances made by the J-TEXT engineering team in recent years in the following areas:(1) a high-voltage power supply for an auxiliary heating system;(2) a breakdown protection device for an auxiliary heating power supply;(3) magnetic field compatibility;(4) a high-voltage pulsed power supply for a fieldreversed configuration;(5) a large physics experimental facility control system.The research backgrounds,technical progress,test results,applications,summaries and prospects are described in detail in each part.These innovative research results and valuable engineering experience can promote the progress of fusion power supply technology,and also lay a foundation for the development of power supplies with higher parameters in the future.展开更多
文摘The superconducting tokamak HT-7U [1] has been designed by the Institute of Plasma Physics since 1998 and will be set up before 2003. The 1.2 MW /2.45 GHz HT-7U LHCD (Lower hybrid current drive) system which being the most efficient non-induction device can heat the plasma and drive the plasma current has been efficiently in operation 'owl and a particular design of the 2.8 MW/-35 kV high-voltage DC power supply has been already completed and will apply to the klystron of LHCD on HT-7 and the future HT-7U, and the project of the power supply has been examined and approved professionally by an authorized group of high-level specialist in the institute of Plasma Physics. The detailed design of the power supply and the simulation results are referred in the paper.
基金supported in part by National Key Research and Development Program of China(2017YFB1200801)Continuous Co-phase Traction Power System based on Static Power Converter(20192001148).
文摘A novel DC traction power supply system suitable for energy feeding and de-icing is proposed in this paper for an urban rail transit catenary on the basis of the full bridge submodule (FBSM) modular multilevel converter (MMC). The FBSM-MMC is a novel type of voltage source converter (VSC) and can directly control the output DC voltage and conduct bipolar currents, thus flexibly controlling the power flow of the urban rail transit catenary. The proposed topology can overcome the inherent disadvantages of the output voltage drop in the diode rectifier units, increase the power supply distance and reduce the number of traction substations. The flexible DC technology can coordinate multiple FBSM-MMCs in a wide area and jointly complete the bidirectional control of catenary power flow during the operation of the electric locomotive, so as to realize the local consumption and optimal utilization of the recovered braking energy of the train. In addition, the FBSM-MMCs can also adjust the output current when the locomotive is out of service to prevent the catenary from icing in winter. The working modes of the proposed topology are illustrated in detail and the control strategy is specially designed for normal locomotive operations and catenary de-icing. Simulation cases conducted by PSCAD/EMTDC validate the proposed topology and its control strategy.
基金supported by the National Key Research and Development Program of China(Nos.2017YFE0300104 and 2017YFE0301803)National Natural Science Foundation of China(No.51821005)
文摘To meet the stringent requirements of the fusion power supply for large-scale fusion devices,the J-TEXT engineering team has carried out key technology research and applications in several important directions of fusion power supply.This article presents the advances made by the J-TEXT engineering team in recent years in the following areas:(1) a high-voltage power supply for an auxiliary heating system;(2) a breakdown protection device for an auxiliary heating power supply;(3) magnetic field compatibility;(4) a high-voltage pulsed power supply for a fieldreversed configuration;(5) a large physics experimental facility control system.The research backgrounds,technical progress,test results,applications,summaries and prospects are described in detail in each part.These innovative research results and valuable engineering experience can promote the progress of fusion power supply technology,and also lay a foundation for the development of power supplies with higher parameters in the future.
