Geometry and formation mechanism of tension gashes and their implication on the hydrocarbon accumulation in the deep-seated strata of sedimentary basin:A case from Shunnan area of Tarim Basin

With the theoretical and technological developments related to cratonic strike-slip faults,the Shuntuoguole Low Uplift in the Tarim Basin has attracted considerable attention recently.Affected by multi-stage tectonic movements,the strike-slip faults have controlled the distribution of hydrocarbon resources owing to the special fault characteristics and fault-related structures.In contrast,the kinematics and formation mechanism of strike-slip faults in buried sedimentary basins are difficult to investigate,limiting the discussion of these faults and hydrocarbon accumulation.In this study,we identified the characteristics of massive sigmoidal tension gashes(STGs)that formed in the Shunnan area of the Tarim Basin.High-resolution three-dimensional seismic data and attribute analyses were used to investigate their geometric and kinematic characteristics.Then,the stress state of each point of the STGs was calculated using seismic curvature attributes.Finally,the formation mechanism of the STGs and their roles in controlling hydrocarbon migration and accumulation were discussed.The results suggest that:(1)the STGs developed in the Shunnan area have a wide distribution,with a tensile fault arranged in an enéchelon pattern,showing an S-shaped bending.These STGs formed in multiple stages,and differential rotation occurred along the direction of strike-slip stress during formation.(2)Near the principal displacement zone of the strike-slip faults,the stress value of the STGs was higher,gradually decreasing at both ends.The shallow layer deformation was greater than the deep layer deformation.(3)STGs are critical for connecting source rocks,migrating oil and gas,sealing horizontally,and developing efficient reservoirs.This study not only provides seismic evidence for the formation and evolution of super large STGs,but also provides certain guidance for oil and gas exploration in this area.

Additive manufacturing of Ni-based superalloys: Residual stress, mechanisms of crack formation and strategies for crack inhibition

The additive manufacturing(AM)of Ni-based superalloys has attracted extensive interest from both academia and industry due to its unique capabilities to fabricate complex and high-performance components for use in high-end industrial systems.However,the intense temperature gradient induced by the rapid heating and cooling processes of AM can generate high levels of residual stress and metastable chemical and structural states,inevitably leading to severe metallurgical defects in Ni-based superalloys.Cracks are the greatest threat to these materials’integrity as they can rapidly propagate and thereby cause sudden and non-predictable failure.Consequently,there is a need for a deeper understanding of residual stress and cracking mechanisms in additively manufactured Ni-based superalloys and ways to potentially prevent cracking,as this knowledge will enable the wider application of these unique materials.To this end,this paper comprehensively reviews the residual stress and the various mechanisms of crack formation in Ni-based superalloys during AM.In addition,several common methods for inhibiting crack formation are presented to assist the research community to develop methods for the fabrication of crack-free additively manufactured components.

Mechanism of carbonate cementation and its influence on reservoir in Pinghu Formation of Xihu Sag

Carbonate cements are the most abundant authigenic mineral and impact on physical properties greatly in sandstone reservoir.In this paper,Pinghu Formation of Xihu Sag was taken as a target.Characteristics,distribution and formation of carbonate cements were investigated via optical microscopy,cathodoluminescence(CL),electron probe and in-situ carbon-oxygen isotope.The results showed that carbonate cements varied in types and shapes.Calcite/dolomite mainly present as poikilotopic cements,while ferrocalcite/ferrodolomite/ankerite generally present as pore-filling cements.Carbon isotope(δ^(13)C)values of carbonate cements were ranging from–7.77‰to–2.67‰,with an average of–4.52‰,while oxygen isotope(δ^(18)O)values were ranging from–18.94‰to–12.04‰,with an average of–14.86‰.Theδ^(13)C/δ^(18)O indicated that the paleo-fluid of carbonate cement was mainly freshwater.Organic carbon mainly came from organic matter within mature source rocks,and inorganic carbon came from dissolution of carbonate debris and early carbonate cements.Distinctiveδ^(13)C/δ^(18)O values manifest that carbonate cements with different types formed in different periods,which make different contributions to the reservoir properties.Calcite/dolomite formed during eodiagenesis(70–90℃)and early mesodiagenesis stage(90–120℃),and were favorable to reservoir owing to their compacted resistance and selective dissolution.Ferrocalcite/ferrodolomite/ankerite formed during middle-late mesodiagenetic stage(above 120℃),and were unfavorable to reservoir due to cementing the residual intergranular pores.Hence,in order to evaluate the reservoir characteristics,it is of significantly important to distinguish different types of carbonate cements and explore their origins.

Formation mechanism of co-axial grain boundaries in a Mg alloy

Due to the insufficient slip systems in hexagonal close-packed structure,twinning is frequently activated to support stable plastic deformation of Mg alloy.In this work,we found four typical twin-like interfaces with misorientations of 102°,109°,142°and 149°,respectively,which had not only a shared[1120]zone axis of neighboring grains,but also overlapped diffraction spots similar to twins.However,highresolution transmission electron microscope(HRTEM)analysis revealed that the interfaces in real space deviated from the supposed twinning planes in reciprocal space,i.e.their overlapped diffraction spots.We clarified that the incoherent interfaces were co-axial grain boundaries(CGBs).Additionally,a special angle ofθ,close to 90°,between the interface and one side of basal plane,was frequently formed in CGBs.We proposed that interaction of multiple twinning contributes to the formation of CGBs,and theθis formed due to alternative tensile and compression twinning under a uniaxial loading.

Formation mechanisms of ethyl acetate and organic acids in Kluyveromyces marxianus L1-1 in Chinese acid rice soup

This study aims to explore the formation mechanism of ethyl acetate and organic acids in acid rice soup(rice-acid soup)inoculated with Kluyveromyces marxianus L1-1 through the complementary analysis of transcriptome and proteome.The quantity of K.marxianus L1-1 varied significantly in the fermentation process of rice-acid soup and the first and third days were the two key turning points in the growth phase of K.marxianus L1-1.Importantly,the concentrations of ethyl acetate,ethanol,acetic acid,and L-lactic acid increased from day 1 to day 3.At least 4231 genes and 2937 proteins were identified and 610 differentially expressed proteins were annotated to 30 Kyoto Encyclopedia of Genes and Genomes(KEGG)pathways based on the analysis results of transcriptome and proteome.The key genes and proteins including up-regulated alcohol dehydrogenase family,alcohol O-acetyltransferase,acetyl-CoA C-acetyltransferase,acyl-coenzyme A thioester hydrolase,and down-regulated aldehyde dehydrogenase family were involved in glycolysis/gluconeogenesis pathways,starch and sucrose metabolism pathways,amino sugar and nucleotide sugar metabolism pathways,tricarboxylic acid(TCA)cycle,and pyruvate metabolism pathways,thus promoting the formation of ethyl acetate,organic acids,alcohols,and other esters.Our results revealed the formation mechanisms of ethyl acetate and organic acids in rice-acid soup inoculated with K.marxianus L1-1.

Ground fissure development regularity and formation mechanism of shallow buried coal seam mining with Karst landform in Jiaozi coal mine: a case study

A comprehensive study was undertaken at Jiaozi coal mine to investigate the development regularity of ground fissures in shallow buried coal seam mining with Karst landform,shedding light on the development type,geographical distribution,dynamic development process,and failure mechanism of these ground fissures by employing field monitoring,numerical simulation,and theoretical analysis.The findings demonstrate that ground fissure development has an obvious feature of subregion,and its geographical distribution is significantly affected by topography.Tensile type,open type,and stepped type are three different categories of ground fissure.Ground fissures emerge dynamically as the panel advances,and they typically develop with a distance of less than periodic weighting step distance in advance of panel advancing position.Ground fissures present the dynamic development feature,temporary fissure has the ability of self-healing.The dynamic development process of ground fissure with closed-distance coal seam repeated mining is expounded,and the development scale is a dynamic development stage of“closure→expansion→stabilized”on the basis of the original development scale.From the perspective of topsoil deformation,the computation model considering two points movement vectors towards two directions of the gob and the ground surface is established,the development criterion considering the critical deformation value of topsoil is obtained.The mechanical model of hinged structure of inclined body is proposed to clarify the ground fissure development,and the interaction between slope activity and ground fissure development is expounded.These research results fulfill the gap of ground fissures about development regularity and formation mechanism,and can contribute to ground fissure prevention and treatment with Karst landform.

Differences in and factors controlling organic matter enrichment in the Ziliujing Formation shale in the Sichuan Basin

Lacustrine shale oil and gas are important fields for unconventional exploration and development in China,and organic-rich shale deposition lays down the critical foundation for hydrocarbon generation.There are two sets of shale,the Dongyuemiao and Da’anzhai Members,in the Ziliujing Formation in the Sichuan Basin.To identify the differential enrichment characteristics of organic matter and clarify its controlling factors,geochemical analyses of organic and inorganic geochemical analyses were performed.The results showed that the total organic carbon content of the Dongyuemiao shale(1.36%)is slightly higher than that of the Da’anzhai shale(0.95%).The enrichment of organic matter in the two shales resulted from the comprehensive controls of paleoproductivity,paleoenvironment,and terrigenous input,but different factors have different effects.In addition,driven by climate,the change in the sulfate concentration in the bottom water further led to the different intensities of bacterial sulfate reduction in early diagenesis.This made a great difference regarding organic matter accumulation in the two members.In general,climate may have played a dominant role in organic matter enrichment in the two sets of shale.

Adaptive Event-Triggered Time-Varying Output Group Formation Containment Control of Heterogeneous Multiagent Systems

In this paper,a class of time-varying output group formation containment control problem of general linear hetero-geneous multiagent systems(MASs)is investigated under directed topology.The MAS is composed of a number of tracking leaders,formation leaders and followers,where two different types of leaders are used to provide reference trajectories for movement and to achieve certain formations,respectively.Firstly,compen-sators are designed whose states are estimations of tracking lead-ers,based on which,a controller is developed for each formation leader to accomplish the expected formation.Secondly,two event-triggered compensators are proposed for each follower to evalu-ate the state and formation information of the formation leaders in the same group,respectively.Subsequently,a control protocol is designed for each follower,utilizing the output information,to guide the output towards the convex hull generated by the forma-tion leaders within the group.Next,the triggering sequence in this paper is decomposed into two sequences,and the inter-event intervals of these two triggering conditions are provided to rule out the Zeno behavior.Finally,a numerical simulation is intro-duced to confirm the validity of the proposed results.

Porosity, permeability and rock mechanics of Lower Silurian Longmaxi Formation deep shale under temperature-pressure coupling in the Sichuan Basin, SW China

To investigate the porosity, permeability and rock mechanics of deep shale under temperature-pressure coupling, we selected the core samples of deep shale from the Lower Silurian Longmaxi Formation in the Weirong and Yongchuan areas of the Sichuan Basin for porosity and permeability experiments and a triaxial compression and sound wave integration experiment at the maximum temperature and pressure of 120 ℃ and 70 MPa. The results show that the microscopic porosity and permeability change and the macroscopic rock deformation are mutually constrained, both showing the trend of steep and then gentle variation. At the maximum temperature and pressure, the porosity reduces by 34%–71%, and the permeability decreases by 85%–97%. With the rising temperature and pressure, deep shale undergoes plastic deformation in which organic pores and clay mineral pores are compressed and microfractures are closed, and elastic deformation in which brittle mineral pores and rock skeleton particles are compacted. Compared with previous experiments under high confining pressure and normal temperature,the experiment under high temperature and high pressure coupling reveals the effect of high temperature on stress sensitivity of porosity and permeability. High temperature can increase the plasticity of the rock, intensify the compression of pores due to high confining pressure, and induce thermal stress between the rock skeleton particles, allowing the reopening of shale bedding or the creation of new fractures along weak planes such as bedding, which inhibits the decrease of permeability with the increase of temperature and confining pressure. Compared with the triaxial mechanical experiment at normal temperature, the triaxial compression experiment at high temperature and high pressure demonstrates that the compressive strength and peak strain of deep shale increase significantly due to the coupling of temperature and pressure. The compressive strength is up to 435 MPa and the peak strain exceeds 2%, indicating that high temperature is not conducive to fracture initiation and expansion by increasing rock plasticity. Lithofacies and mineral composition have great impacts on the porosity, permeability and rock mechanics of deep shale. Shales with different lithologies are different in the difficulty and extent of brittle failure. The stress-strain characteristics of rocks under actual geological conditions are key support to the optimization of reservoir stimulation program.

Application of General Shear Theory to the Study of Formation Mechanism of the Metamorphic Core Complex:A Case Study of Xiaoqinling in Central China

The kinematic vorticity number and strain of the mylonitic zone related to the detachment fault increase from ESE to WNW along the moving direction of the upper plate of the Xiaoqinling metamorphic core complex (XMCC) and the geometry of quartz c-axis fabrics changes progressively from crossed girdles to single girdles in the same direction. Therefore, pure shear is dominant in the ESE part of the XMCC while simple shear becomes increasingly important towards WNW. However, the shear type does not change with the strain across the shear zone, thus the variation of shear type is of significance in indicating the formation mechanism. The granitic plutons within the XMCC came from the deep source and their emplacement was an active and forceful upwelling prior to the detachment faulting. The PTt path demonstrates that magmatism is an important cause for the formation of the XMCC. The formation mechanism of the XMCC is supposed to be active plutonism and passive detachment. Crustal thickening and magmatic doming caused necking extension with pure shear, and magmatic heating and doming resulted in detachment extension with simple shear and formed the XMCC.

Reservoir characteristics,formation mechanisms and petroleum exploration potential of volcanic rocks in China

Characterized by complex lithology and strong heterogeneity, volcanic reservoirs in China developed three reservoir space types： primary pores, secondary pores and fractures. The formation of reservoir space went through the cooling and solidification stage （including blast fragmentation, crystallization differentiation and solidification） and the epidiagenesis stage （including metasomatism, filling, weathering and leaching, formation fluid dissolution and tectonism）. Primary pores were formed at the solidification stage, which laid the foundation for the development and transformation of effective reservoirs. Secondary pores were formed at the epidiagenesis stage, with key factors as weathering and leaching, formation fluid dissolution and tectonism. In China, Mesozoic-Cenozoic volcanic rocks developed in the Songliao Basin and Bohai Bay Basin in the east and Late Paleozoic volcanic rocks developed in the Junggar Basin, Santanghu Basin and Ta- rim Basin in the west. There are primary volcanic reser- voirs and secondary volcanic reservoirs in these volcanic rocks, which have good accumulation conditions and great exploration potential.

Formation Mechanism of the Changxing Formation Gas Reservoir in the Yuanba Gas Field,Sichuan Basin,China

In a very gentle platform-margin paleogeographic environment, platform-margin reef flat facies carbonate reservoir rocks were developed in the Changxing Formation of Yuanba field. Later weak structural evolution and diagenetic evolution caused the Changxing Formation to form lithologic traps, with good reservoirs such as dissolved bioclastic dolostone and dissolved pore dolostone. The Changxing Formation gas reservoir is a pseudo-layered porous lithologic gas reservoir under pressure depletion drive, with high H2S and moderate CO2 contents. This paper predictes that the conducting system for the Changxing Formation gas reservoir is possibly composed of the pores and microfractures in the Changxing Formation reservoir, the top erosional surface of the Changxing Formation, as well as the micropores and microfractures in the underlying formations. The Changxing Formation reservoir has experienced 3 hydrocarbon charging stages. This paper suggests that diffusion is the major formation mechanism for this gas reservoir. In the Middle and Late Yanshanian, the Yuanba area entered the major gas charging stage. The gas migrated mainly through diffusion and with the assistance of seepage flow in small faults and microfractures from the source rocks and the other oil-bearing strata to the Changxing Formation carbonate reservoir rocks, forming lithologic gas pools. In the Himalayan Epoch, the lithologic traps were uplifted as a whole without strong modification or overlapping, and were favorable for gas preservation.

Study on Gel Formation Mechanism of Konjac Glucomannan

The transformation of molecular conformation after gelatinization of konjac glucomannan is characterized by means of GC, GPC, FT-IR, DSC, XRD and TEM. The results showed that the molecule of KGM had no branch, the monose composition and connecting type of the molecular chain had no change, the transformation of molecule weight was little, and its drying powder sample formed an evidently new crystalline region. The hollow double helix structure of KGM in hydrosol changed from stretch chain into intercross and entwisted after gelatinization. The gelatin formation mechanism of konjac glucomannan is thereby expounded.

PRELIMINARY STUDY ON THE FORMATION MECHANISM OF COUNTER WESTERN BOUNDARY UNDERCURRENTS BELOW THE THERMOCLINE——A CONCEPTUAL MODEL

Based on a simple conceptual model of stratified ocean, the criterion of the geostrophic velocity inversion in and below the thermocline was derived as h ′·η′<0 and ρ 1|η′|≤Δρ| h ′|, meaning that the slopes of the thermocline( h ′) and the sea surface(η′) must be opposite to each other, and that h ′ must be strong enough to satisfy the latter inequality. The criterion was applied to discuss the features of the western boundary undercurrents, the counter undercurrents of the western boundary currents below the thermocline, and to discuss the dynamics of their formation finally resulting from the combination of the basin scale circulation and local geostrophic balance. The formation mechanism, multi core structure, and transport variations of the Mindanao Undercurrent and those of other undercurrents, such as the North Equatorial Undercurrent and the Kuroshio undercurrent, can be satisfactorily explained by the above results.

Reservoir differences and formation mechanisms in the Ke-Bai overthrust belt,northwestern margin of the Junggar Basin,China

There are some differences in reservoir quality of clastic rock between the hanging wall and the foot wall of the Ke-Bai overthrust belt, northwestern margin of the Junggar Basin, western China, which affect the efficient petroleum exploration in this highly mature exploration area. Based on a large number of thin-sections, cast thin-sections, and physical property analysis of cores, we systematically discuss the Permian-Jurassic reservoir differences between the hanging wall and the foot wall of the Ke- Bai overthrust fault from the aspects of structural evolution, time-space distribution of the depositional system, diagenesis characteristics, and reservoir quality and analyzed the reasons for the differences in reservoir properties. The overthrusting of the Ke-Bai fault directly results in different burial histories, diagenesis evolution, and porosity evolution between the hanging wall and the foot wall. The diflbrences of reservoir characteristics are mainly embodied in buried depth, grain size, sedimentary facies, diagenetic stage, and reservoir quality. The analysis results showed that burial history and depositional characteristics controlled by overthrusting are direct influencing factors of reservoir differences. Because of shallow burial depth of the hanging wall, the reservoir compaction is weak and primary pores are preserved well. The porosity of reservoir on the hanging wall is generally 10%-25%. The strata on the foot wall are deeply buried, and there are mainly mixed pores with the average porosity of 5%-20%. The favorable reservoir on the foot wall is generally developed near faults or in the channel sand bodies, which are usually dissolution development areas.

Characteristics and Formation Mechanism of Giant Long-Runout Landslide: A Case Study of the Gamisi Ancient Landslide in the Upper Minjiang River, China

The upper reaches of the Minjiang River are in the eastern margin of the Tibetan Plateau,where active faults are well developed and earthquakes frequently occur.Anomalous climate change and the extremely complex geomechanical properties of rock and soil have resulted in a number of geohazards.Based on the analysis of remote sensing interpretations,geological field surveys,geophysical prospecting and geological dating results,this paper discusses the developmental characteristics of the Gamisi ancient landslide in Songpan County,Sichuan Province,and investigates its geological age and formation mechanism.This study finds that the Gamisi ancient landslide is in the periglacial region of the Minshan Mountain and formed approximately 25 ka BP.The landslide initiation zone has a collapse and slide zone of approximately 22.65×106–31.7×106 m3 and shows a maximum sliding distance of approximately 1.42 km,with an elevation difference of approximately 310 m between the back wall of the landslide and the leading edge of the accumulation area.The landslide movement was characterized by a high speed and long runout.During the sliding process,the landslide body eroded and dammed the ancient Minjiang River valley.The ancient river channel was buried 30-60 m below the surface of the landslide accumulation area.Geophysical prospecting and drilling observations revealed that the ancient riverbed was approximately 80-100 m thick.After the dam broke,the Minjiang River was migrated to the current channel at the leading edge of the landslide.The Gamisi ancient landslide was greatly affected by the regional crustal uplift,topography,geomorphology and paleoclimatic change.The combined action of periglacial karstification and climate change caused the limestone at the rear edge of the landslide fractured,thus providing a lithological foundation for landslide occurrence.Intense tectonic activity along the Minjiang Fault,which runs through the middle and trailing parts of the Gamisi ancient landslide,may have been the main factor inducing landsliding.Studying the Gamisi ancient landslide is of great significance for investigating the regional response to paleoclimatic change and geomorphologic evolution of the Minjiang Fault since the late Pleistocene and for disaster prevention and mitigation.

A review of β-Ga_2O_3 single crystal defects, their effects on device performance and their formation mechanism

As a wide-bandgap semiconductor(WBG), β-Ga_2O_3 is expected to be applied to power electronics and solar blind UV photodetectors. In this review, defects in β-Ga_2O_3 single crystals were summarized, including dislocations, voids, twin, and small defects. Their effects on device performance were discussed. Dislocations and their surrounding regions can act as paths for the leakage current of SBD in single crystals. However, not all voids lead to leakage current. There's no strong evidence yet to show small defects affect the electrical properties. Doping impurity was definitely irrelated to the leakage current. Finally, the formation mechanism of the defects was analyzed. Most small defects were induced by mechanical damages. The screw dislocation originated from a subgrain boundary. The edge dislocation lying on a plane slightly tilted towards the(102) plane, the(101) being the possible slip plane. The voids defects like hollow nanopipes, PNPs, NSGs and line-shaped grooves may be caused by the condensation of excess oxygen vacancies, penetration of tiny bubbles or local meltback. The nucleation of twin lamellae occurred at the initial stage of "shoulder part" during the crystal growth. These results are helpful in controlling the occurrence of crystal defects and improving the device performance.

Formation Mechanism and Microstructure of High-Strength Gypsum

The microstructure, phase composition, and thermal characteristics of various natural gypsums and the high-strength gypsum──the converted product of natural one are analysed.The formation mecbanism of high-strength gypsum is further discussed. It is found that the high-streugth gypsum is of hollow irregular hexagonal prism structure, which is almost free from tbe (010) and (100) cleavages and can form clustered fibrous crystals with high-strength.

Insight into the formation mechanism of levoglucosenone in phosphoric acid-catalyzed fast pyrolysis of cellulose

The catalytic fast pyrolysis of cellulose impregnated with phosphoric acid (H3PO4) offers a promising method for the selective production of levoglucosenone (LGO),a valuable anhydrosugar product.However,the fundamental mechanism for selective LGO formation is unclear.Herein,quantum chemistry calculations and catalytic fast pyrolysis experiments were performed to reveal the formation mechanism of LGO in H3PO4-catalyzed cellulose pyrolysis.H3PO4 significantly decreased the energy barriers of the pyrolytic reactions and altered the competitiveness of the LGO formation pathways,promoting LGO formation.Through different pathways in the non-catalytic and H3P04-catalyzed conditions,LGO is mainly produced from the primary decomposition of glucose units of cellulose and secondary conversion of levoglucosan.The major catalytic formation pathways of LGO comprise similar reactions,with dehydration at the 3-OH+2-H site as the rate-determining step.Importantly,secondary conversion of 1,4;3,6-dianhydro-α-D-glucopyranose is not feasible for LGO formation,in contrast to previous reports.In addition,a high degree of polymerization is beneficial for the selectivity of LGO formation in the catalytic process,because the glycosidic bond is important for the formation of the bicyclic structure (1,5-and1,6-acetal rings).

Effect of CuO on the Formation Mechanism of Calcium Sulphoaluminate

Calcium sulphoaluminate was prepared with chemical reagents in this paper. The formation mechanism of calcium sulphoaluminate and effect of CuO on the formation mechanism of calcium sulphoaluminate were investigated by the chemical analysis, X-ray diffraction （XRD）, and differential scanning calorimetry （DSC）. The results show that there are three ways in the formation of calcium sulphoaluminate. CuO can promote the decomposition of calcium carbonate and decrease the formation temperature of calcium sulphoaluminate（C4A3S）. When the burning temperature is below 1 000 ℃, the addition of CuO can promote the formation of calcium sulphoaluminate, while CuO can not favor the formation of calcium sulphoaluminate above 1 000 ℃.