Development of the Highly Homogeneous Magnetic Field for Simulative Gyrotron by HTS

The low temperature superconducting magnet system, with the highly homogeneous magnetic field, has been applied extensively, and has had important effects on many domains. With the development of the cryogenic and superconducting techniques, it is possible that high temperature superconducting magnet with highly homogeneous magnetic field is manufactured by high temperature superconductor（HTS）. Therefore, a simulative gyrotron applied into war, with highly homogeneous magnetic field, is designed and manufactured by high temperature superconducting material.

Homogeneous Acetylation of Cellulose at Relatively High Concentrations in an Ionic Liquid

At relatively high cellulose mass concentrations(8%,10%,and 12%),homogeneous acetylation of cellulose was carried out in an ionic liquid,1-allyl-3-methylimidazolium chloride(AmimCl).Without using any catalyst,cellulose acetates(CAs)with the degree of substitution(DS)in a range from 0.4 to 3.0 were synthesized in one-step.The effects of reaction time,temperature and molar ratio of acetic anhydride/anhydroglucose unit(AGU) in cellulose on DS value of CAs were investigated.The synthesized CAs were characterized by means of FT-IR, NMR,and solubility,mechanical and thermal tests.After the acetylation,the used ionic liquid AmimCl was easily recycled and reused.This study shows the potential of the homogeneous acetylation of cellulose at relatively high concentrations in ionic liquids in future industrial applications.

Homogeneous Isolation of Nanocellulose from Cotton Cellulose by High Pressure Homogenization

Nano-cellulose materials are widely believed to have the potential to push polymer mechanical properties. The cotton cellulose was dissolved in ionic liquid (1-butyl-3-methylimidazolium chloride ([Bmim]Cl)), and then was isolated by high pressure homogenization in a homogeneous media. The nano-cellulose was obtained at 80MPa for 30 cycles. The geometry and microstructure of the cellulose nano-fibres were observed by SEM and their particle size analysis. FTIR, XRD and TGA were used to characterize changes to chemical functionality. Particular emphasis is given to the physical and chemical characterization of these nano-fibres together with their thermal stability and crystallinity, in order to develop their suitability.

Effect of High Temperature Calcination on Structure and Properties of Bauxite-based Homogeneous Clinkers

In this paper,the effect of high temperature calcination on the structure and properties of bauxite-based homogeneous clinkers calcined at different temperatures for different durations was studied.The results show that with the rising of calcination temperature and the prolonging of holding time,the volume density of bauxite-based homogeneous clinkers increases and the apparent porosity decreases.After high temperature calcination,the linear expansion of bauxitebased homogeneous clinker is smaller than that of the non-calcined ones.Whether calcined at high temperatures or not,the thermal shock resistance of bauxite-based homogeneous clinkers is good.The crystalline phases of bauxite-based homogeneous clinkers are mainly mullite and corundum.There is more glass phase in the bauxite-based homogeneous clinkers without calcination.After calcination at high temperatures the glass phase content decreases significantly,and the mullite crystals develop better forming the cross-network structure.

Analysis of High Concentration Spikes Appearing in Mass Plume in Nearly Homogeneous Turbulent Flow Based on the PDF Transport Equation

To evaluate the pollutant dispersion in background turbulent flows, most researches focus on statistical variation of concentrations or its fluctuations. However, those time-averaged quantities may be insufficient for risk assessment, because there emerge many high-intensity pollutant areas in the instantaneous concentration field. In this study, we tried to estimate the frequency of appearance of the high concentration areas in a turbulent flow based on the Probability Density Function (PDF) of concentration. The high concentration area was recognized by two conditions based on the concentration and the concentration gradient values. We considered that the estimation equation for the frequency of appearance of the recognized areas consisted of two terms based on each condition. In order to represent the two terms with physical quantities of velocity and concentration fields, simultaneous PIV (Particle Image Velocimetry) and PLIF (Planar Laser-Induced Fluorescence) measurement and PLIF time-serial measurement were performed in a quasi-homogeneous turbulent flow. According to the experimental results, one of the terms, related to the condition of the concentration, was found to be represented by the concentration PDF, while the other term, by the streamwise mean velocity and the integral length scale of the turbulent flow. Based on the results, we developed an estimation equation including the concentration PDF and the flow features of mean velocity and integral scale of turbulence. In the area where the concentration PDF was a Gaussian one, the difference between the frequencies of appearance estimated by the equation and calculated from the experimental data was within 25%, which showed good accuracy of our proposed estimation equation. Therefore, our proposed equation is feasible for estimating the frequency of appearance of high concentration areas in a limited area in turbulent mass diffusion.

Diffusion Process of High Concentration Spikes in a Quasi-Homogeneous Turbulent Flow

When a mass spreads in a turbulent flow, areas with obviously high concentration of the mass compared with surrounding areas are formed by organized structures of turbulence. In this study, we extract the high concentration areas and investigate their diffusion process. For this purpose, a combination of Planar Laser Induced Fluorescence (PLIF) and Particle Image Velocimetry (PIV) techniques was employed to obtain simultaneously the two fields of the concentration of injected dye and of the velocity in a water turbulent channel flow. With focusing on a quasi-homogeneous turbulence in the channel central region, a series of PLIF and PIV images were acquired at several different downstream positions. We applied a conditional sampling technique to the PLIF images to extract the high concentration areas, or spikes, and calculated the conditional-averaged statistics of the extracted areas such as length scale, mean concentration, and turbulent diffusion coefficient. We found that the averaged length scale was constant with downstream distance from the diffusion source and was smaller than integral scale of the turbulent eddies. The spanwise distribution of the mean concentration was basically Gaussian, and the spanwise width of the spikes increased linearly with downstream distance from the diffusion source. Moreover, the turbulent diffusion coefficient was found to increase in proportion to the spanwise distance from the source. These results reveal aspects different from those of regular mass diffusion and let us conclude that the diffusion process of the spikes differs from that of regular mass diffusion.

Effect of Sulfate Ions on YAG Powders Synthesized by Microwave Homogeneous Precipitation

Using A1(NO3)3·9H2O, NH4Al(SO4)2·12H2O, Y(NO3)3as mother salts, and urea as precipitant, YAG nano-powders were synthesized by microwave homogeneous precipitation. The composition, morphology, and phase transformation of precursor were analyzed by IR, XRD and TEM. The size distribution of YAG powders was characterized using laser diffraction method. The results show that sulfate ions influence the dispersion, composition and morphology of the YAG precursors. The addition of moderate sulfate ions can produce YAG powders with nano size and excellent dispersion at 1100℃.

Formulation development and preparation of fish oil liposome by using high pressure homogenizer for food supplement product

It is known that “Fish Oil” is the raw material that has lot of benefits for health, because fish oil consists of several necessary unsaturated fatty acids, particularly Omega-3 and Docosahexanoic acid (DHA). Omega-3 can decrease triglyceride level, and then it can increase HDL cholesterol level. In addition, DHA can support brain cell synthesis and also nervous system for human.

Effect of high-pressure homogenization on stability of emulsions containing zein and pectin

The aim of this study was to investigate the effect of high-pressure homogenization on the droplet size and physical stability of different formulations of pectin–zein stabilized rice bran oil emulsions. The obtained emulsions, both before and after passing through highpressure homogenizer, were subjected to stability test under environmental stress conditions,that is, temperature cycling at 4 °C/40 °C for 6 cycles and centrifugal test at 3000 rpm for 10 min. Applying high-pressure homogenization after mechanical homogenization caused only a small additional decrease in emulsion droplet size. The droplet size of emulsions was influenced by the type of pectin used;emulsions using high methoxy pectin(HMP) were smaller than that using low methoxy pectin(LMP). This is due to a greater emulsifying property of HMP than LMP. The emulsions stabilized by HMP–zein showed good physical stability with lower percent creaming index than those using LMP, both before and after passing through high-pressure homogenizer. The stability of emulsions after passing through high-pressure homogenizer was slightly higher when using higher zein concentration, resulting from stronger pectin–zein complexes that could rearrange and adsorb onto the emulsion droplets.

Hydrodynamics of air-kerosene bubble column under elevated pressure in homogeneous flow regime

A multiphase computational fluid dynamics(CFD)model coupled with the population balance equation(PBE)was developed in a homogeneous air-kerosene bubble column under elevated pressure(P).The specific pressure drop(ΔP/L),gas holdup(α_(G)),and Sauter mean diameter(d_(32))were experimentally measured in the bubble column with 1.8 m height and 0.1 m inner diameter,which was operated at a superficial gas velocity of 12.3 mm·s^(-1),and P=1-35 bar(1 bar=10^(5) Pa).A modified drag coefficient model was proposed to consider the effect of bubble swarm and pressure on hydrodynamics of the bubble column.The Luo breakage model was modified to account for liquid density,viscosity,surface tension and gas density.TheΔP/L,α_(G),and d_(32) obtained from the CFD model were compared with experimental data,and the gas density-dependent parameters of the CFD model were identified.With increasing P from 1 to 35 bar,theα_(G) varied from 5.4%to 7.2% and the d32 decreased from 2.3 to 1.5 mm.The CFD-PBE model is applicable to predict hydrodynamics of pressurized bubble columns for gas-organic liquid in the homogeneous regime.

Effect of High Pressure Homogenization Treatment on Structure and Properties of Soybean Residue Cellulose Nanofibers

To reduce the adverse effects of non-cellulose materials on subsequent homogenization,the effects of a high-pressure homogenization treatment on the structure and properties of cellulose nanofibers(CNF)prepared by acid treatment of soybean residue were studied.The effects of the number of homogenization step on the microfibrillation degree,crystalline structure and mechanical properties of the soybean residue were analyzed by SEM,FT-IR,XRD,TG and DTG.The results showed that an increase in the number of homogenization steps led to an increase in the degree of microfibrillation,a more uniform distribution of the CNF diameter,and an increase in the crystallinity of CNF.However,but when the number of homogenization steps exceeded 15,the rate of change decreased,and the crystallinity of CNF decreased.As the number of homogenization steps increased,the average degree of polymerization and average molecular weight of CNF decreased continuously,and after 15 homogenization steps,their rate of change also decreased.Therefore,15 steps of high-pressure homogenization represented a suitable number of steps to prepare the soybean residue CNF with an average diameter of 15 nm.

Impact of High Pressure Homogenization (HPH) Treatment on the Nutritional Quality of Egg/Yogurt, Vegetable and Fruit Based Creams

The food industry has made large investments in processing facilities relying mostly on conventional thermal processing technologies with well-established reliability and efficacy. These techniques have important disadvantages such as off flavors, destruction of nutrients, and other losses of product quality. Non thermal processing is a key factor for preserving or improving the nutritional value of food, and high pressure homogenization (HPH) processing is now a celebrated option experiencing worldwide commercial growth. Notwithstanding, little is known on the impact of HPH treatments on the nutritional value of food. In this study we have evaluated the possible modification induced by HPH treatment in egg-yogurt, mixed vegetable, and mixed fruit creams. Our results evidence that HPH does not affect the nutritional quality of lipids and does not cause lipolysis, lipid peroxidation and vitamin E loss. In plant food products, HPH preserved or improved the nutritional quality, suggesting its use as valid alternative to thermal pasteurization for obtaining high quality products with preserved nutritional characteristics. Although further investigations are needed, especially at extreme pressure and temperature combinations, our results open new perspectives for the production of ambient stable products with good nutritional value, and contribute to process optimization.

Solving Cauchy Issues of Highly Nonlinear Elliptic Equations Using a Meshless Method

In this paper,we address 3D inverse Cauchy issues of highly nonlinear elliptic equations in large cuboids by utilizing the new 3D homogenization functions of different orders to adapt all the specified boundary data.We also add the average classification as an approximate solution to the nonlinear operator part,without requiring to cope with nonlinear equations to resolve the weighting coefficients because these constructions are owned many conditions about the true solution.The unknown boundary conditions and the result can be retrieved straightway by coping with a small-scale linear system when the outcome is described by a new 3D homogenization function,which is right to find the numerical solutions with the errors smaller than the level of noise being put on the over-specified Neumann conditions on the bottom of the cuboid.Besides,note that the new homogenization functions method(HFM)does not require dealing with the regularization and highly nonlinear equations.The robustness and accuracy of the HFM are verified by comparing the recovered results of several numerical experiments to the exact solutions in the entire region,even though a very large level of noise 50%is imposed on the over specified Neumann conditions.The numerical errors of our scheme are in the order of O(10^(−1))-O(10^(−4)).

Effect of Cr/Mn segregation on pearlite–martensite banded structure of high carbon bearing steel

The effect of Cr/Mn segregation on the abnormal banded structure of high carbon bearing steel was studied by reheating and hot rolling.With the use of an optical microscope, scanning electron microscope, transmission electron microscope, and electron probe microanalyzer, the segregation characteristics of alloying elements in cast billet and their relationship with hot-rolled plate banded structure were revealed.The formation causes of an abnormal banded structure and the elimination methods were analyzed.Results indicate the serious positive segregation of C, Cr, and Mn alloy elements in the billet.Even distribution of Cr/Mn elements could not be achieved after 10 h of heat preservation at 1200℃, and the spacing of the element aggregation area increased, but the segregation index of alloy elements decreased.Obvious alloying element segregation characteristics are present in the banded structure of the hot-rolled plate.This distinct white band is composed of martensitic phases.The formation of this abnormal pearlite–martensite banded structure is due to the interaction between the undercooled austenite transformation behavior of hot-rolled metal and the segregation of its alloying elements.Under the air cooling after rolling, controlling the segregation index of alloy elements can reduce or eliminate the abnormal banded structure.

Experimental studies on resistance characteristics of high concentration red mud in pipeline transport

Red mud will flow in paste form under high pressure during pipeline transport.It belongs to a two-phase flow of materials with high viscosity and a high concentration of non-sedimentation,homogeneous solid-liquids.In pipeline transport,its resistance char- acteristics will be influenced by such factors as grain size,velocity,concentration,density, grain composition and pipe diameter etc..With the independently developed small-sized tube-type pressure resistance test facility,studied the resistance characteristics of red mud concerning the three influencing factors,paste concentration,velocity and pipe diameter, which attract the most attention in projects.The fine grain size of the red mud is d_(50)= 13.02μm.According to the experimental results,the pressure loss in transport will in- crease along with the increase of velocity and will fall along with the increase of pipe di- ameter.A 1% difference in paste concentration will result in a 50%～100% difference in pipeline resistance loss.These experimental data is hoped to be direct guidance to the design of high concentration and viscous material pipeline transport system.

电子封装超声互连研究新进展

超声振动摩擦和局部高温高压可实现同材或异材的低温、快速、可靠的互连,超声技术在电子封装中显示出无与伦比的技术优势。综述了超声引线键合、块体母材直接超声键合、母材/焊料/母材三体超声固相键合等超声固相键合技术,超声钎焊、超声瞬态液相扩散焊等超声液相键合技术,超声纳米烧结、混合(复合)焊料超声互连等超声固液混合键合技术。无论是高频低功率的高速超声键合,还是中频高功率超声常速键合,超声的作用规律和效果相似,其互连质量和互连机理与接触材料及其状态有着最为密切的关系;考虑由于超声互连过程快、时间短、互连界面窄、接头不透明,可以采用焊接实时高速摄像技术和同步辐射X射线成像技术相结合,实时观察液态焊料润湿流动、焊料颗粒运动轨迹、母材的剥离过程及界面形成规律;考虑由于微焊点尺寸放大,可以借助温度传感器和压力传感器进行超声的温度效应和瞬态压强实时测量;基于双超/多超声诸多影响因素,多超声的数值模拟分析将成为微焊点超声互连机理研究的有效手段。

聚乙二醇修饰杨梅苷固体脂质纳米粒制备及其体内药动学研究

目的制备聚乙二醇修饰杨梅苷固体脂质纳米粒,并考察其体内药动学。方法高压均质法制备聚乙二醇修饰固体脂质纳米粒,测定包封率、载药量、粒径、Zeta电位,单因素试验优化处方,XRPD进行晶型分析,考察体外释药、稳定性。24只大鼠随机分为4组,分别灌胃给予杨梅苷、杨梅苷固体脂质纳米粒、杨梅苷固体脂质纳米粒+聚乙二醇硬脂酸酯、聚乙二醇修饰杨梅苷固体脂质纳米粒的0.5%CMC-Na混悬液(150 mg/kg),于不同时间点采血,HPLC法测定杨梅素血药浓度,计算主要药动学参数。结果最优处方为药脂比1∶15,单硬酯酸甘油酯与聚乙二醇硬脂酸酯比例10∶1,泊洛沙姆188浓度0.8%,均质次数8次,包封率为81.75%,载药量为5.04%,粒径为207.56 nm,PDI为0.092,Zeta电位为-14.79 mV。杨梅苷以无定型状态存在于聚乙二醇修饰固体脂质纳米粒中,18 h内累积释放度为64.71%,模拟胃液中2 h内、模拟肠液中12 h内稳定性良好。与原料药、固体脂质纳米粒比较,聚乙二醇修饰固体脂质纳米粒t_(max)延长(P<0.05),C_(max)、AUC_(0~t)、AUC_(0~∞)升高(P<0.05,P<0.01),相对生物利用度与原料药相比增加至4.60倍。结论聚乙二醇修饰固体脂质纳米粒可改善杨梅苷稳定性,促进其口服吸收。

光甘草定烟酰胺纳米乳的制剂评价与透皮吸收

为提高光甘草定和烟酰胺的透皮吸收性能,利用两种高能乳化法制备了纳米乳(HPH-NE和HSSU-NE),对其形态、粒径、Zeta电位、稳定性和皮肤渗透性能进行了评价与考察.结果表明:两种纳米乳颗粒均为规则球形,未见聚集现象,平均粒径分别为51.60 nm和42.98 nm,Zeta电位分别为-50.44 mV和-68.50 mV,并且在离心、4℃和20℃以及加速试验条件下均具有较好的稳定性,两种方法制成的纳米乳相对普通乳液具有更好的皮肤渗透性能,光甘草定的平均渗透速率提高3~5倍,烟酰胺的平均渗透率提高1.6~2.6倍,为光甘草定的纳米制剂以及化妆品应用研究奠定了坚实基础.

超高速飞行器自适应模糊超螺旋控制律设计

针对超高速飞行器多源扰动下高精强鲁棒控制需求,提出了一种自适应模糊超螺旋控制律。首先,给出控制导向的超高速飞行器姿态模型;其次,采用广义超螺旋算法设计控制器,实现滑模变量与跟踪误差的高精收敛;同时,引入高阶齐次观测器估计飞行器复杂扰动,并在控制律中做前馈补偿以提高算法鲁棒性。针对控制增益选取问题,基于模糊算法,通过融合专家经验,建立控制增益与滑模变量直接关联。相较传统自适应方法,该自适应律可实现控制增益快速调节整定,同时兼顾系统响应速度、鲁棒性与抖振抑制需求。最后,以考虑复杂多源干扰的超高速飞行器为对象进行仿真,结果证明了自适应模糊超螺旋控制律的有效性。