Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explo...Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explore the effects of sintering temperature and holding time on relative density,phase composition,microstructure,bulk conductivity,and total conductivity.In the impedance test under frequency of 1-10^(6) Hz,the bulk conductivity of the samples increased with increasing sintering temperature,and the total conductivity first increased and then decreased.SEM results showed that the average grain size in the ceramics was controlled by the sintering temperature,which increased from(0.54±0.01)μm to(1.21±0.01)μm when the temperature changed from 750 to 950°C.The relative density of the ceramics increased and then decreased with increasing temperature as the porosity increased.The holding time had little effect on the grain size growth or sample density,but an extended holding time resulted in crack generation that served to reduce the conductivity of the solid electrolyte.展开更多
This paper investigates the impacts of a bus holding strategy on the mutual interference between buses and passenger cars in a non-dedicated bus route,as well as the impacts on the characteristics of pollutant emissio...This paper investigates the impacts of a bus holding strategy on the mutual interference between buses and passenger cars in a non-dedicated bus route,as well as the impacts on the characteristics of pollutant emissions of passenger cars.The dynamic behaviors of these two types of vehicles are described using cellular automata(CA)models under open boundary conditions.Numerical simulations are carried out to obtain the phase diagrams of the bus system and the trajectories of buses and passenger cars before and after the implementation of the bus holding strategy under different probabilities of passenger cars entering a two-lane mixed traffic system.Then,we analyze the flow rate,satisfaction rate,and pollutant emission rates of passenger cars together with the performance of a mixed traffic system.The results show that the bus holding strategy can effectively alleviate bus bunching,whereas it has no significant impact on the flow rate and pollutant emission rates of passenger cars;the flow rate,satisfaction rate,and pollutant emission rates of passenger cars for either the traffic system or for each lane are influenced by the bus departure interval and the number of passengers arriving at bus stops.展开更多
Hydroxyapatite(HA)is a bio ceramic commonly utilized in bone tissue engineering due to its bioactive and osteoconductive properties.Crab shells are usually disregarded as waste material despite their significant CaCO_...Hydroxyapatite(HA)is a bio ceramic commonly utilized in bone tissue engineering due to its bioactive and osteoconductive properties.Crab shells are usually disregarded as waste material despite their significant CaCO_(3) content,and have not been widely utilized in the synthesis of HA.This study aims to synthesize and analyze HA derived from crab shells using the hydrothermal method with different durations of holding time.This study utilized precipitated calcium carbonate(PCC)derived from crab shells.With a hydrothermal reactor set at 160℃ and varying holding times of 14(HA_14),16(HA_16),and 18(HA_18)h,a PCC and(NH4)2HPO4 mixture was used to synthesize HA.The synthesis results were analyzed using scanning electron microscopy(SEM),fourier transform infrared spectroscopy(FTIR),and X-ray diffraction(XRD)tests.This study has accomplished the synthesis of HA from crab shells.Nonetheless,the final product of synthesis still contained CaCO_(3) as an impurity.The prolonged hydrothermal holding time of 14 to 18 h resulted in a reduction of impurities while increasing the percentage of crystal weight and crystallite size of HA.Specimen CH_18 is the best-quality product generated in this study.This specimen produced HA with the highest percentage of crystal weight and crystallite size compared to the other specimens.Furthermore,specimen CH_18 exhibited the lowest concentration of impurities.The Ca/P ratio in this specimen was also the closest to 1.67.The Ca/P ratio,crystallite size,and crystal weight percentage of this specimen are 1.54,19.06 nm,and 99.1%,respectively.展开更多
The aim of this study was to investigate the inter-fraction variations, patient comfort and knowledge at Charlotte Maxeke Johannesburg Academic Hospital (CMJAH). The differences in set-up that occurred between treatme...The aim of this study was to investigate the inter-fraction variations, patient comfort and knowledge at Charlotte Maxeke Johannesburg Academic Hospital (CMJAH). The differences in set-up that occurred between treatment sessions for the left sided breast patients were observed and recorded. Measurements of routine set-up variation for 24 patients were performed by matching the cone beam computed tomography (CBCT) and the planning computed tomography (CT). Scans of all five fractions per patient were used to quantify the setup variations with standard deviation (SD) in all the three directions (anterior posterior, left right, and superior inferior). The patients DIBH comfort and knowledge was also evaluated. The average translational errors for the anterior posterior (AP, z), left-right (LR, x), and Superior-inferior (SI, y) directions were 0.40 cm, 0.40 cm, and 0.40 cm, respectively. The translation variation of the three directions showed statistical significance (P < 0.05). On comfort and knowledge investigation, among all participants, 80% moderately agreed that the therapist’s instructions for operating the deep inspiration breath hold (DIBH) technique were easy to understand, and 63.33% indicated that their comfort with the DIBH technique was neutral or average. The inter-fraction variations in patients with left-sided breast cancer were qualitatively analyzed. Significant shifts between CBCT and planning CT images were observed. The daily treatment verification could assist accurate dose delivery.展开更多
The present study has been carried out on a total of 50 available plant species to assess their dust-capturing capacity and biochemical performances in and around open cast granite mine areas of Jhansi district and Bu...The present study has been carried out on a total of 50 available plant species to assess their dust-capturing capacity and biochemical performances in and around open cast granite mine areas of Jhansi district and Bundelkhand University campus treated as control site. Plant species existing under a polluted environment for a long time may be considered as potentially resistant species and recommended for green belt design in mining areas, especially to cope with dust pollution. Results showed the pollution level, especially of mining-originated dust particles holding capacity of leaves and effects of different biochemical parameters (Total Chlorophyll, Protein and Carotenoid) of existing plant species both from mining areas as well as from Bundelkhand University campus. Based on their performances, Tectona grandis L., Ficus hispida L., Calotropis procera Aiton., Butea monosperma Lam. and Ficus benghalensis L., etc. are highly tolerant species while Ficus infectoria L., Artocarpus heterophyllus Lam., Ipomoea purpurea L., Allianthus excelsa Roxb. and Bauhinia variegata L. are intermediate tolerant species. T. grandis had shown the highest dust-holding capacity (2.566 ± 0.0004 mg/cm2) whereas Albizia procera (0.018 ± 0.0002 mg/cm2) was found to be the lowest dust-holding capacity. Our findings also showed that the T. grandis and F. hispida have significant dust deposition with minimal effect of dust on their leaf chlorophyll (17.447 ± 0.019 mg/g and 14.703 ± 0.201 mg/g), protein (0.699 ± 0.001 mg/g and 0.604 ± 0.002 mg/g) and carotenoid (0.372 ± 0.003 mg/g and 0.354 ± 0.003 mg/g) content respectively among all selected plant species. Therefore, in the present investigation, plant species with high tolerance to high dust-holding capacity on their leaf surfaces are preferable for green corridors as open cast granite mines and their adjacent areas.展开更多
This study investigates the application of the two-parameter Weibull distribution in modeling state holding times within HIV/AIDS progression dynamics. By comparing the performance of the Weibull-based Accelerated Fai...This study investigates the application of the two-parameter Weibull distribution in modeling state holding times within HIV/AIDS progression dynamics. By comparing the performance of the Weibull-based Accelerated Failure Time (AFT) model, Cox Proportional Hazards model, and Survival model, we assess the effectiveness of these models in capturing survival rates across varying gender, age groups, and treatment categories. Simulated data was used to fit the models, with model identification criteria (AIC, BIC, and R2) applied for evaluation. Results indicate that the AFT model is particularly sensitive to interaction terms, showing significant effects for older age groups (50 - 60 years) and treatment interaction, while the Cox model provides a more stable fit across all age groups. The Survival model displayed variability, with its performance diminishing when interaction terms were introduced, particularly in older age groups. Overall, while the AFT model captures the complexities of interactions in the data, the Cox model’s stability suggests it may be better suited for general analyses without strong interaction effects. The findings highlight the importance of model selection in survival analysis, especially in complex disease progression scenarios like HIV/AIDS.展开更多
Screw connection is a type most commonly applied to timber structures.As important commercial tree species in China,Masson pine and Chinese fir have the potential to prepare wood structures.In this study,the effects o...Screw connection is a type most commonly applied to timber structures.As important commercial tree species in China,Masson pine and Chinese fir have the potential to prepare wood structures.In this study,the effects of the diameter of the self-tapping screw and the guiding bores on the nail holding performance on different sections of Masson pine and Chinese fir dimension lumbers were mainly explored.The results showed that:(1)The nail holding strength of the tangential section was the maximum,followed by that of the radial section,and that of the cross section was the minimum.(2)The nail holding strength of Masson pine was higher than that of Chinese fir.(3)The nail holding strength grew with the increase in the diameter of self-tapping screws,but a large diameter would lead to plastic cracking of the timber,thus further affecting the nail holding strength.Masson pine and Chinese fir reached the maximum nail holding strength when the diameter of self-tapping screws was 3.5 mm.(4)Under a large diameter of screws,prefabricated guiding bores could mitigate timber cracking and improve its nail holding strength.(5)Prefabricated guiding bores were more necessary for the screw connection of Masson pine.The results obtained could provide a scientific basis for the screw connection design of Masson pine and Chinese fir timber structures.展开更多
On January 17,the Chinese Association for International Understanding(CAFIU)and the Association of Bosnia-China Friendship co-hosted the webinar themed New Vision of China-Bosnia and Herzegovina Cooperation and Role o...On January 17,the Chinese Association for International Understanding(CAFIU)and the Association of Bosnia-China Friendship co-hosted the webinar themed New Vision of China-Bosnia and Herzegovina Cooperation and Role of Civil Society.展开更多
The inauguration of the secretariat of ISO/TC 341,Heat supply net work,was held in Beijing on April 11.China Urban Construction Design&Research Institute,a subordinate enterprise of China Construction Technology C...The inauguration of the secretariat of ISO/TC 341,Heat supply net work,was held in Beijing on April 11.China Urban Construction Design&Research Institute,a subordinate enterprise of China Construction Technology Consulting Co.,Ltd.(CCTC),holds the secret ariat,which is China’s first ISO secretariat for standardization in the field of housing and urban-rural development.展开更多
Objective:To analyze the application of deep inspiration breath hold technique in radiotherapy after breast-conserving surgery for left breast cancer and the improvement of cardiac dose.Methods:A total of 45 patients ...Objective:To analyze the application of deep inspiration breath hold technique in radiotherapy after breast-conserving surgery for left breast cancer and the improvement of cardiac dose.Methods:A total of 45 patients with left breast cancer treated in our hospital after breast-conserving surgery were selected,and the selection time was set from January 2020 to August 2022.All patients received radiotherapy.The right breast,heart,and lung volumes,and dose parameters of the heart,lungs,right breast,and left anterior descending coronary artery were compared under free breathing(FB)and deep inspiration breath hold(DIBH)technical modes.Results:The heart volume of the DIBH group was smaller than that of the FB group,and the left and right lung volumes were significantly larger than those of the FB group.In the DIBH group,the heart dose parameters V5,proper lung dose parameters,and left anterior descending coronary artery dose parameters were found lower than that of the FB group,and the differences were statistically significant(P<0.05).Conclusion:Compared with FB,the DIBH technique can reduce the heart’s size and increase the lung volume when used for radiotherapy after breast-conserving surgery for left breast cancer.It also reduces the dose to the heart,right lung,and left anterior descending coronary artery,thus protecting the heart and lungs.展开更多
Holding temperature and holding thickness are main parameters for two-phase controlled rolling on plate mill. The optimization of holding temperature and holding thickness for pass schedule calculation of two-phase co...Holding temperature and holding thickness are main parameters for two-phase controlled rolling on plate mill. The optimization of holding temperature and holding thickness for pass schedule calculation of two-phase controlled rolling on plate mill was presented and its feature is as follows: (1) Determination of holding thickness can be automatically obtained based on the influence of mill safety limits, tracking zone length and holding time on holding thickness; (2) Determination of holding temperature can be automatically obtained and the holding time can be reduced as much as possible; (3) Algorithm can modify the holding temperature and thickness depending on slab size and product size.展开更多
[ Objective] To explore the effects of different proportion of bee pollen on the water holding capacity of pork in Duroc Landrace x Yorkshire growing-finishing pigs in order to determine the optimal proportion. [ Met...[ Objective] To explore the effects of different proportion of bee pollen on the water holding capacity of pork in Duroc Landrace x Yorkshire growing-finishing pigs in order to determine the optimal proportion. [ Method] A total of 80 Duroc x Landrace x Yorkshire growing-finishing pigs, weighing (10.0 ± 1.0) kg, were randomly divided into five groups. The experimental period was 120 d including the 5-day pre-feecling period. The corn-soybean meal was not replaced during the whole period. All pigs had free access to feed and water. The pigs were fasting for 24 h but not prohibited from feed before the beginning. Group I was the control group reared with the diet not supplemented bee pollen. The pigs in group II, III ,IV and V were reared with the diet supplemented bee pollen at the concentration of 1%, 3%, 5% and 7%, respectively. After slaughtering, eye muscle was used for determination of water holding capacity through fast filter paper method, drip loss method, cooking loss method and Na- pole yield determination method. [ Resultl With the increase of the proportion of bee pollen, the water holding capacity of pork was first good and then poor. The addition of bee pollen at the concentration of 5% significantly reduced the drip loss of pork and the water holding capacity which was detected by fast filter paper method, but the cooking loss and Napole yield were not significantly influenced. [ Condmion] The bee pollen can effectively improve the water holding capacity of pork in Duroc x Landrace x Yorkshire growing-finishing pigs, and the optimal proportion is 5%.展开更多
The subject of research in this paper is the analysis and presentation of data on agricultural holdings, the structure of available and utilized area. The data and calculated indicators represent a comprehensive overv...The subject of research in this paper is the analysis and presentation of data on agricultural holdings, the structure of available and utilized area. The data and calculated indicators represent a comprehensive overview of the structural characteristics of national agriculture, but they are also an internationally comparable database, based on key features of agriculture. The main goal of this paper is to determine and explain more comprehensively and in detail by using appropriate methods, and based on available data, the condition of <i><span style="font-family:Verdana;">utilized agricultural area</span></i><span style="font-family:Verdana;"> (hereinafter: UAA) and its quantitative and qualitative</span><span style="font-family:Verdana;"> characteristics by utilization categories and manner of its use;typ</span><span style="font-family:Verdana;">es of agricultural holdings and statistical regions and lower statistical units of data grouping. </span><span style="font-family:Verdana;">Implementation of such a defined basic research goal indicates necessity of more detailed and continuous study of the causes </span><span style="font-family:Verdana;">that led to the reduction of available agricultural area and especially its better and more important production categories of utilization and measures and activities to be taken to eliminate or reduce the causes of inadequate management of agricultural area in the coming period</span><span style="font-family:Verdana;">. The importance of this research arises from the fact that the results on </span><i><span style="font-family:Verdana;">utilized agricultural area</span></i><span style="font-family:Verdana;"> can be used to adopt </span><span style="font-family:Verdana;">appropriate measures and undertake certain activities in land and overall agricultu</span><span style="font-family:Verdana;">ral and rural policy related to sustainable utilization, arrangement and protection of agricultural land and more balanced integrated development of rural areas, as well as to find better solutions in the field of utilization, ownership sector and conditions of agricultural area management.</span>展开更多
基金funded by the National Natural Science Foundation of China(Nos.51672310,51272288,51972344)。
文摘Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explore the effects of sintering temperature and holding time on relative density,phase composition,microstructure,bulk conductivity,and total conductivity.In the impedance test under frequency of 1-10^(6) Hz,the bulk conductivity of the samples increased with increasing sintering temperature,and the total conductivity first increased and then decreased.SEM results showed that the average grain size in the ceramics was controlled by the sintering temperature,which increased from(0.54±0.01)μm to(1.21±0.01)μm when the temperature changed from 750 to 950°C.The relative density of the ceramics increased and then decreased with increasing temperature as the porosity increased.The holding time had little effect on the grain size growth or sample density,but an extended holding time resulted in crack generation that served to reduce the conductivity of the solid electrolyte.
基金Project supported by the National Natural Science Foundation of China(Grant No.52172314)the Natural Science Foundation of Liaoning Province,China(Grant No.2022-MS-150)the Special Funding Project of Taishan Scholar Engineering.
文摘This paper investigates the impacts of a bus holding strategy on the mutual interference between buses and passenger cars in a non-dedicated bus route,as well as the impacts on the characteristics of pollutant emissions of passenger cars.The dynamic behaviors of these two types of vehicles are described using cellular automata(CA)models under open boundary conditions.Numerical simulations are carried out to obtain the phase diagrams of the bus system and the trajectories of buses and passenger cars before and after the implementation of the bus holding strategy under different probabilities of passenger cars entering a two-lane mixed traffic system.Then,we analyze the flow rate,satisfaction rate,and pollutant emission rates of passenger cars together with the performance of a mixed traffic system.The results show that the bus holding strategy can effectively alleviate bus bunching,whereas it has no significant impact on the flow rate and pollutant emission rates of passenger cars;the flow rate,satisfaction rate,and pollutant emission rates of passenger cars for either the traffic system or for each lane are influenced by the bus departure interval and the number of passengers arriving at bus stops.
基金funded the World Class Research(WCR)Grant of Universitas Diponegoro with Contract Number 357-36/UN7.D2/PP/IV/2024.
文摘Hydroxyapatite(HA)is a bio ceramic commonly utilized in bone tissue engineering due to its bioactive and osteoconductive properties.Crab shells are usually disregarded as waste material despite their significant CaCO_(3) content,and have not been widely utilized in the synthesis of HA.This study aims to synthesize and analyze HA derived from crab shells using the hydrothermal method with different durations of holding time.This study utilized precipitated calcium carbonate(PCC)derived from crab shells.With a hydrothermal reactor set at 160℃ and varying holding times of 14(HA_14),16(HA_16),and 18(HA_18)h,a PCC and(NH4)2HPO4 mixture was used to synthesize HA.The synthesis results were analyzed using scanning electron microscopy(SEM),fourier transform infrared spectroscopy(FTIR),and X-ray diffraction(XRD)tests.This study has accomplished the synthesis of HA from crab shells.Nonetheless,the final product of synthesis still contained CaCO_(3) as an impurity.The prolonged hydrothermal holding time of 14 to 18 h resulted in a reduction of impurities while increasing the percentage of crystal weight and crystallite size of HA.Specimen CH_18 is the best-quality product generated in this study.This specimen produced HA with the highest percentage of crystal weight and crystallite size compared to the other specimens.Furthermore,specimen CH_18 exhibited the lowest concentration of impurities.The Ca/P ratio in this specimen was also the closest to 1.67.The Ca/P ratio,crystallite size,and crystal weight percentage of this specimen are 1.54,19.06 nm,and 99.1%,respectively.
文摘The aim of this study was to investigate the inter-fraction variations, patient comfort and knowledge at Charlotte Maxeke Johannesburg Academic Hospital (CMJAH). The differences in set-up that occurred between treatment sessions for the left sided breast patients were observed and recorded. Measurements of routine set-up variation for 24 patients were performed by matching the cone beam computed tomography (CBCT) and the planning computed tomography (CT). Scans of all five fractions per patient were used to quantify the setup variations with standard deviation (SD) in all the three directions (anterior posterior, left right, and superior inferior). The patients DIBH comfort and knowledge was also evaluated. The average translational errors for the anterior posterior (AP, z), left-right (LR, x), and Superior-inferior (SI, y) directions were 0.40 cm, 0.40 cm, and 0.40 cm, respectively. The translation variation of the three directions showed statistical significance (P < 0.05). On comfort and knowledge investigation, among all participants, 80% moderately agreed that the therapist’s instructions for operating the deep inspiration breath hold (DIBH) technique were easy to understand, and 63.33% indicated that their comfort with the DIBH technique was neutral or average. The inter-fraction variations in patients with left-sided breast cancer were qualitatively analyzed. Significant shifts between CBCT and planning CT images were observed. The daily treatment verification could assist accurate dose delivery.
文摘The present study has been carried out on a total of 50 available plant species to assess their dust-capturing capacity and biochemical performances in and around open cast granite mine areas of Jhansi district and Bundelkhand University campus treated as control site. Plant species existing under a polluted environment for a long time may be considered as potentially resistant species and recommended for green belt design in mining areas, especially to cope with dust pollution. Results showed the pollution level, especially of mining-originated dust particles holding capacity of leaves and effects of different biochemical parameters (Total Chlorophyll, Protein and Carotenoid) of existing plant species both from mining areas as well as from Bundelkhand University campus. Based on their performances, Tectona grandis L., Ficus hispida L., Calotropis procera Aiton., Butea monosperma Lam. and Ficus benghalensis L., etc. are highly tolerant species while Ficus infectoria L., Artocarpus heterophyllus Lam., Ipomoea purpurea L., Allianthus excelsa Roxb. and Bauhinia variegata L. are intermediate tolerant species. T. grandis had shown the highest dust-holding capacity (2.566 ± 0.0004 mg/cm2) whereas Albizia procera (0.018 ± 0.0002 mg/cm2) was found to be the lowest dust-holding capacity. Our findings also showed that the T. grandis and F. hispida have significant dust deposition with minimal effect of dust on their leaf chlorophyll (17.447 ± 0.019 mg/g and 14.703 ± 0.201 mg/g), protein (0.699 ± 0.001 mg/g and 0.604 ± 0.002 mg/g) and carotenoid (0.372 ± 0.003 mg/g and 0.354 ± 0.003 mg/g) content respectively among all selected plant species. Therefore, in the present investigation, plant species with high tolerance to high dust-holding capacity on their leaf surfaces are preferable for green corridors as open cast granite mines and their adjacent areas.
文摘This study investigates the application of the two-parameter Weibull distribution in modeling state holding times within HIV/AIDS progression dynamics. By comparing the performance of the Weibull-based Accelerated Failure Time (AFT) model, Cox Proportional Hazards model, and Survival model, we assess the effectiveness of these models in capturing survival rates across varying gender, age groups, and treatment categories. Simulated data was used to fit the models, with model identification criteria (AIC, BIC, and R2) applied for evaluation. Results indicate that the AFT model is particularly sensitive to interaction terms, showing significant effects for older age groups (50 - 60 years) and treatment interaction, while the Cox model provides a more stable fit across all age groups. The Survival model displayed variability, with its performance diminishing when interaction terms were introduced, particularly in older age groups. Overall, while the AFT model captures the complexities of interactions in the data, the Cox model’s stability suggests it may be better suited for general analyses without strong interaction effects. The findings highlight the importance of model selection in survival analysis, especially in complex disease progression scenarios like HIV/AIDS.
基金funded by the National Natural Science Foundation of China (32160348)Forestry Science and Technology Research Project of Guizhou Forestry Bureau (J[2022]21 and[2020]C14)+1 种基金Department Program of Guizhou Province ([2020]1Y128)the Cultivation Project of Guizhou University of China ([2019]37).
文摘Screw connection is a type most commonly applied to timber structures.As important commercial tree species in China,Masson pine and Chinese fir have the potential to prepare wood structures.In this study,the effects of the diameter of the self-tapping screw and the guiding bores on the nail holding performance on different sections of Masson pine and Chinese fir dimension lumbers were mainly explored.The results showed that:(1)The nail holding strength of the tangential section was the maximum,followed by that of the radial section,and that of the cross section was the minimum.(2)The nail holding strength of Masson pine was higher than that of Chinese fir.(3)The nail holding strength grew with the increase in the diameter of self-tapping screws,but a large diameter would lead to plastic cracking of the timber,thus further affecting the nail holding strength.Masson pine and Chinese fir reached the maximum nail holding strength when the diameter of self-tapping screws was 3.5 mm.(4)Under a large diameter of screws,prefabricated guiding bores could mitigate timber cracking and improve its nail holding strength.(5)Prefabricated guiding bores were more necessary for the screw connection of Masson pine.The results obtained could provide a scientific basis for the screw connection design of Masson pine and Chinese fir timber structures.
文摘On January 17,the Chinese Association for International Understanding(CAFIU)and the Association of Bosnia-China Friendship co-hosted the webinar themed New Vision of China-Bosnia and Herzegovina Cooperation and Role of Civil Society.
文摘The inauguration of the secretariat of ISO/TC 341,Heat supply net work,was held in Beijing on April 11.China Urban Construction Design&Research Institute,a subordinate enterprise of China Construction Technology Consulting Co.,Ltd.(CCTC),holds the secret ariat,which is China’s first ISO secretariat for standardization in the field of housing and urban-rural development.
文摘Objective:To analyze the application of deep inspiration breath hold technique in radiotherapy after breast-conserving surgery for left breast cancer and the improvement of cardiac dose.Methods:A total of 45 patients with left breast cancer treated in our hospital after breast-conserving surgery were selected,and the selection time was set from January 2020 to August 2022.All patients received radiotherapy.The right breast,heart,and lung volumes,and dose parameters of the heart,lungs,right breast,and left anterior descending coronary artery were compared under free breathing(FB)and deep inspiration breath hold(DIBH)technical modes.Results:The heart volume of the DIBH group was smaller than that of the FB group,and the left and right lung volumes were significantly larger than those of the FB group.In the DIBH group,the heart dose parameters V5,proper lung dose parameters,and left anterior descending coronary artery dose parameters were found lower than that of the FB group,and the differences were statistically significant(P<0.05).Conclusion:Compared with FB,the DIBH technique can reduce the heart’s size and increase the lung volume when used for radiotherapy after breast-conserving surgery for left breast cancer.It also reduces the dose to the heart,right lung,and left anterior descending coronary artery,thus protecting the heart and lungs.
文摘Holding temperature and holding thickness are main parameters for two-phase controlled rolling on plate mill. The optimization of holding temperature and holding thickness for pass schedule calculation of two-phase controlled rolling on plate mill was presented and its feature is as follows: (1) Determination of holding thickness can be automatically obtained based on the influence of mill safety limits, tracking zone length and holding time on holding thickness; (2) Determination of holding temperature can be automatically obtained and the holding time can be reduced as much as possible; (3) Algorithm can modify the holding temperature and thickness depending on slab size and product size.
文摘[ Objective] To explore the effects of different proportion of bee pollen on the water holding capacity of pork in Duroc Landrace x Yorkshire growing-finishing pigs in order to determine the optimal proportion. [ Method] A total of 80 Duroc x Landrace x Yorkshire growing-finishing pigs, weighing (10.0 ± 1.0) kg, were randomly divided into five groups. The experimental period was 120 d including the 5-day pre-feecling period. The corn-soybean meal was not replaced during the whole period. All pigs had free access to feed and water. The pigs were fasting for 24 h but not prohibited from feed before the beginning. Group I was the control group reared with the diet not supplemented bee pollen. The pigs in group II, III ,IV and V were reared with the diet supplemented bee pollen at the concentration of 1%, 3%, 5% and 7%, respectively. After slaughtering, eye muscle was used for determination of water holding capacity through fast filter paper method, drip loss method, cooking loss method and Na- pole yield determination method. [ Resultl With the increase of the proportion of bee pollen, the water holding capacity of pork was first good and then poor. The addition of bee pollen at the concentration of 5% significantly reduced the drip loss of pork and the water holding capacity which was detected by fast filter paper method, but the cooking loss and Napole yield were not significantly influenced. [ Condmion] The bee pollen can effectively improve the water holding capacity of pork in Duroc x Landrace x Yorkshire growing-finishing pigs, and the optimal proportion is 5%.
文摘The subject of research in this paper is the analysis and presentation of data on agricultural holdings, the structure of available and utilized area. The data and calculated indicators represent a comprehensive overview of the structural characteristics of national agriculture, but they are also an internationally comparable database, based on key features of agriculture. The main goal of this paper is to determine and explain more comprehensively and in detail by using appropriate methods, and based on available data, the condition of <i><span style="font-family:Verdana;">utilized agricultural area</span></i><span style="font-family:Verdana;"> (hereinafter: UAA) and its quantitative and qualitative</span><span style="font-family:Verdana;"> characteristics by utilization categories and manner of its use;typ</span><span style="font-family:Verdana;">es of agricultural holdings and statistical regions and lower statistical units of data grouping. </span><span style="font-family:Verdana;">Implementation of such a defined basic research goal indicates necessity of more detailed and continuous study of the causes </span><span style="font-family:Verdana;">that led to the reduction of available agricultural area and especially its better and more important production categories of utilization and measures and activities to be taken to eliminate or reduce the causes of inadequate management of agricultural area in the coming period</span><span style="font-family:Verdana;">. The importance of this research arises from the fact that the results on </span><i><span style="font-family:Verdana;">utilized agricultural area</span></i><span style="font-family:Verdana;"> can be used to adopt </span><span style="font-family:Verdana;">appropriate measures and undertake certain activities in land and overall agricultu</span><span style="font-family:Verdana;">ral and rural policy related to sustainable utilization, arrangement and protection of agricultural land and more balanced integrated development of rural areas, as well as to find better solutions in the field of utilization, ownership sector and conditions of agricultural area management.</span>