Nail Holding Performance of Self-Tapping Screws on Masson Pine and Chinese Fir Dimension Lumbers

Screw connection is a type most commonly applied to timber structures.As important commercial tree species in China,Masson pine and Chinese fir have the potential to prepare wood structures.In this study,the effects of the diameter of the self-tapping screw and the guiding bores on the nail holding performance on different sections of Masson pine and Chinese fir dimension lumbers were mainly explored.The results showed that:(1)The nail holding strength of the tangential section was the maximum,followed by that of the radial section,and that of the cross section was the minimum.(2)The nail holding strength of Masson pine was higher than that of Chinese fir.(3)The nail holding strength grew with the increase in the diameter of self-tapping screws,but a large diameter would lead to plastic cracking of the timber,thus further affecting the nail holding strength.Masson pine and Chinese fir reached the maximum nail holding strength when the diameter of self-tapping screws was 3.5 mm.(4)Under a large diameter of screws,prefabricated guiding bores could mitigate timber cracking and improve its nail holding strength.(5)Prefabricated guiding bores were more necessary for the screw connection of Masson pine.The results obtained could provide a scientific basis for the screw connection design of Masson pine and Chinese fir timber structures.

Optimization of Holding Temperature and Holding Thickness for Controlled Rolling on Plate Mill

Holding temperature and holding thickness are main parameters for two-phase controlled rolling on plate mill. The optimization of holding temperature and holding thickness for pass schedule calculation of two-phase controlled rolling on plate mill was presented and its feature is as follows： （1） Determination of holding thickness can be automatically obtained based on the influence of mill safety limits, tracking zone length and holding time on holding thickness; （2） Determination of holding temperature can be automatically obtained and the holding time can be reduced as much as possible; （3） Algorithm can modify the holding temperature and thickness depending on slab size and product size.

Available Agricultural Area by Utilization Categories and Ownership Structure of Holdings in the Republic of Serbia

The subject of research in this paper is the analysis and presentation of data on agricultural holdings, the structure of available and utilized area. The data and calculated indicators represent a comprehensive overview of the structural characteristics of national agriculture, but they are also an internationally comparable database, based on key features of agriculture. The main goal of this paper is to determine and explain more comprehensively and in detail by using appropriate methods, and based on available data, the condition of utilized agricultural area (hereinafter: UAA) and its quantitative and qualitative characteristics by utilization categories and manner of its use;types of agricultural holdings and statistical regions and lower statistical units of data grouping. Implementation of such a defined basic research goal indicates necessity of more detailed and continuous study of the causes that led to the reduction of available agricultural area and especially its better and more important production categories of utilization and measures and activities to be taken to eliminate or reduce the causes of inadequate management of agricultural area in the coming period. The importance of this research arises from the fact that the results on utilized agricultural area can be used to adopt appropriate measures and undertake certain activities in land and overall agricultural and rural policy related to sustainable utilization, arrangement and protection of agricultural land and more balanced integrated development of rural areas, as well as to find better solutions in the field of utilization, ownership sector and conditions of agricultural area management.

Effects of Calcining Temperature and Holding Time on the Synthesis of Aluminum Titanate

We aim in this research at synthesizing high-purity aluminium titanate with sludge from the aluminium profile factory by shock cooling method, and mainly discuss the effect of calcining reaction temperature and holding time on crystalline, microstructure and content of aluminum titanate materials to determine the preferred calcining temperature and holding time. XRD and SEM methods were utilized to characterize the crystalline and microstructure of each specimen, Rietveld Quantification software was used for the determination of different crystalline contents of specimens, and Philips plus software was applied to determine the cell parameters of aluminium titanate in different specimens. According to the experimental results, preferred calcining temperature is determined as 1400℃ and preferred holding time is 2 h, at which the grains of aluminum titanate grow completely and the purity of aluminum titanate is 97.2wt%.

Effect of holding pressure on density and cooling rate of cast Al-Si alloy during additive pressure casting

The cast Al-Si alloy was fabricated using the Additive Pressure Casting(APC)method.The effects of holding pressure from 50 to 400 k Pa on the density,cooling rate,and mechanical properties of the alloy,and the corresponding mechanism were discussed.The results indicate that the application of high holding pressure(300 k Pa)enhances the feeding ability of the alloy,leading to an increase of the density.Meanwhile,the cooling rate of the alloy is increased by 100%.In addition,the tensile testing results show that the increase of holding pressure from 50 to 300 k Pa improves the tensile strength and elongation of the alloy by 6.2%and 81.3%,respectively.However,excessive holding pressure(400 k Pa)might lower the density and cooling rate of the alloy due to the feeding channels being blocked.

Effect of Holding Time on the Microstructure and Mechanical Properties of Dual-Phase Steel during Intercritical Annealing

Continuous annealing simulation tests were conducted by using a continuous annealing thermomechanical simulator. Holding times of 5, 60, 180, and 480 seconds for an intercritical annealing temperature of 820℃ were adopted to investigate the evolution of the mierostructure and mechanical properties of ferrite-bainite dual-phase steel. The ferrite-bainite dual-phase steel was characterized by high strength and low yield ratio due to the presence of the constituents （polygonal ferrite, bainite, martensite and retained austenite） of the steel microstructure. Specimen 3 exhibits the highest value of A50 （7.67%） and a product of Rm × A50 （10453MPa%） after a 180s holding. This is likely attributed to the presence of a C-enriched retained anstenite in the microstructure. And the effect of martensite islands and carbide precipitate is thought to be able to contribute in strengthening the present steel. It is expected that equilibrium of anstenite fraction would be reached for reasonable intercritical holding period, regardless of the heating temperature. The results suggest that long increasing holding times may not be needed because the major phase of the microstructure does not change very significantly. It is favorable for industrial production of DP steels to shorten holding times. Key words： ferrite-bainite dual-phase steel; holding time; martensite islands; mechanical properties

An improved GGNMOS triggered SCR for high holding voltage ESD protection applications

Developing an electrostatic discharge（ESD） protection device with a better latch-up immunity has been a challenging issue for the nanometer complementary metal-oxide semiconductor（CMOS） technology. In this work, an improved grounded-gate N-channel metal-oxide semiconductor（GGNMOS） transistor triggered silicon-controlled rectifier（SCR）structure, named GGSCR, is proposed for high holding voltage ESD protection applications. The GGSCR demonstrates a double snapback behavior as a result of progressive trigger-on of the GGNMOS and SCR. The double snapback makes the holding voltage increase from 3.43 V to 6.25 V as compared with the conventional low-voltage SCR. The TCAD simulations are carried out to verify the modes of operation of the device.

Design of a novel high holding voltage LVTSCR with embedded clamping diode

In order to reduce the latch-up risk of the traditional low-voltage-triggered silicon controlled rectifier(LVTSCR), a novel LVTSCR with embedded clamping diode(DC-LVTSCR) is proposed and verified in a 0.18-μm CMOS process. By embedding a p+implant region into the drain of NMOS in the traditional LVTSCR, a reversed Zener diode is formed by the p+implant region and the n+bridge, which helps to improve the holding voltage and decrease the snapback region.The physical mechanisms of the LVTSCR and DC-LVTSCR are investigated in detail by transmission line pulse(TLP)tests and TCAD simulations. The TLP test results show that, compared with the traditional LVTSCR, the DC-LVTSCR exhibits a higher holding voltage of 6.2 V due to the embedded clamping diode. By further optimizing a key parameter of the DC-LVTSCR, the holding voltage can be effectively increased to 8.7 V. Therefore, the DC-LVTSCR is a promising ESD protection device for circuits with the operation voltage of 5.5–7 V.

Cash holdings,corporate governance,and acquirer returns

Background:The wealth effect of limiting shareholder rights via anti-takeover provisions(ATPs)is a contentious issue.By taking the differential effect hypothesis perspective,our study aims to provide additional evidence about the relation between ATPs and acquisition performance.Methods:We examine the interaction of antitakeover provisions(ATPs)with firm characteristics and governance environment in explaining the cross-section of bidder announcement returns.Using a sample of 3,340 completed acquisitions by 1,217 firms during 1996–2006,we test the association between ATPs,firm characteristics,and governance environments with bidder returns.Results:We find that ATPs hurt acquisition performance only when acquirers hold a high level of excess cash.Similarly,ATPs are associated with lower bidder returns only when industry competition is weak and public pension fund ownership is low as well.By contrast,when industry competition is intense and/or public pension fund ownership is high,ATPs do not hurt bidder returns.Conclusions:The complementarity among ATPs,excess cash,industry competition,and public pension fund ownership suggests that ATPs per se do not necessarily result in value-destroying acquisitions for all firms.We address the endogeneity issue of unknown variables by using a proxy for firm prestige and draw the same conclusions.

Water Holding Characteristics of Coarse Woody Debris of Abies fabri Forest on the East Slope of Tibet Sygera Mountain

Coarse woody debris( CWD) has an important role in hydrological function and water and soil conservation function of forest ecosystem especially mountain forest ecosystem. To understand water holding capacity of CWD in subalpine forest of southeast Tibet,CWD reserve of primitive A. fabri forest in Sygera Mountain was investigated by sample plot method,and water absorption and storage capacity of CWD was studied by using soaking method. The results showed that decay grade was positively related to water storage potential,that is to say,the higher the decay grade,the larger the water storage potential. Saturated water holding capacity,saturated water holding rate,effective water holding capacity and effective water holding rate of A. fabri CWD all rose with decay grade increased,and the order was Ⅴ>Ⅳ>Ⅲ>Ⅱ>Ⅰ. CWD reserve was 51.555 t/hm^2,and the maximum water storage capacity was 71.601 t/hm^2,while effective water storage capacity was 60.861 t/hm2,which was equivalent to 6.086 mm of rainfall.

An Inventory Model for Deteriorating Items with Generalised Exponential Decreasing Demand, Constant Holding Cost and Time-Varying Deterioration Rate

In this present paper, an inventory model with a generalised exponential decreasing demand is considered. A numerical example is used to illustrate the application of the model. Sensitivity analysis of the optimal solution with respect to various parameters is carried out to see the effect of parameter changes on the solution.

An Inventory Model for Deteriorating Items with Exponential Declining Demand and Time-Varying Holding Cost

In the present paper, a total optimal cost of an inventory model with exponential declining demand and constant deterioration is considered. The time-varying holding cost is a linear function of time. Shortages are not allowed. The items (like food grains, fashion apparels and electronic equipments) have fixed shelf-life which decreases with time during the end of the season. A numerical example is presented to demonstrate the model and the sensitivity analysis of various parameters is carried out.

High holding voltage SCR for robust electrostatic discharge protection

A novel silicon controlled rectifier（SCR） with high holding voltage（Vh） for electrostatic discharge（ESD） protection is proposed and investigated in this paper. The proposed SCR obtains high Vhby adding a long N＋ layer（LN＋） and a long P＋ layer（LP＋）, which divide the conventional low voltage trigger silicon controlled rectifier（LVTSCR） into two SCRs（SCR1： P＋/Nwell/Pwell/N＋ and SCR2： P＋/LN＋/LP＋/N＋） with a shared emitter. Under the low ESD current（IESD）, the two SCRs are turned on at the same time to induce the first snapback with high V_h（V_（h1））. As the IESDincreases, the SCR2 will be turned off because of its low current gain. Therefore, the IESDwill flow through the longer SCR1 path, bypassing SCR2, which induces the second snapback with high V_h（V_（h2））. The anti-latch-up ability of the proposed SCR for ESD protection is proved by a dynamic TLP-like（Transmission Line Pulse-like） simulation. An optimized V_（h2） of 7.4 V with a maximum failure current（I_（t2）） of 14.7 m A/μm is obtained by the simulation.

New embedded DDSCR structure with high holding voltage and high robustness for 12-V applications

A new dual directional silicon-controlled rectifier based electrostatic discharge (ESD) protection device suitable for 12-V applications is proposed in this paper. The proposed device (NPEMDDSCR) is based on the embedded DDSCR (EMDDSCR) structure, in which the P+ electrode and P+ injection are removed from the inner finger. Compared with the conventional modified DDSCR (MDDSCR), its high holding voltage meets the requirements for applications. Compared with the embedded DDSCR (EMDDSCR), it has good conduction uniformity. The MDDSCR, EMDDSCR, and NPEMDDSCR are fabricated with an identical width in a 0.5-μm CDMOS process. In order to verify and predict the characteristics of the proposed ESD protection device, a transmission line pulse (TLP) testing system and a two-dimensional device simulation platform are used in this work. The measurements demonstrate that the NPEMDDSCR provides improved reliability and higher area efficiency for 12 V or similar applications. The measurement results also show that the NPEMDDSCR provides higher robustness and better latch-up immunity capability.

An Improved Method of Predicting Drag Anchor Trajectory Based on the Finite Element Analyses of Holding Capacity

Drag anchor is one of the most commonly used anchorage foundation types. The prediction of embedded trajectory in the process of drag anchor installation is of great importance to the safety design of mooring system. In this paper, the ultimate anchor holding capacity in the seabed soil is calculated through the established finite element model, and then the embedded motion trajectory is predicted applying the incremental calculation method. Firstly, the drag anchor initial embedded depth and inclination angle are assumed, which are regarded as the start embedded point. Secondly, in each incremental step, the incremental displacement of drag anchor is added along the parallel direction of anchor plate, so the displacement increment of drag anchor in the horizontal and vertical directions can be calculated. Thirdly, the finite element model of anchor is established considering the seabed soil and anchor interaction, and the ultimate drag anchor holding capacity at new position can be obtained. Fourthly, the angle between inverse catenary mooring line and horizontal plane at the attachment point at this increment step can be calculated through the inverse catenary equation. Finally, the incremental step is ended until the angle of drag anchor and seabed soil is zero as the ultimate embedded state condition, thus, the whole embedded trajectory of drag anchor is obtained. Meanwhile, the influences of initial parameter changes on the embedded trajectory are considered. Based on the proposed method, the prediction of drag anchor trajectory and the holding capacity of mooring position system can be provided.

Addressing the MSICS learning curve: identification of instrument-holding techniques used by experienced surgeons

AIM: To identify instrument holding archetypes used by experienced surgeons in order to develop a universal language and set of validated techniques that can be utilized in manual small incision cataract surgery(MSICS) curricula. METHODS: Experienced cataract surgeons performed five MSICS steps(scleral incision, scleral tunnel, side port, corneal tunnel, and capsulorhexis) in a wet lab to record surgeon hand positions. Images and videos were taken during each step to identify validated hand position archetypes.RESULTS: For each MSICS step, one or two major archetypes and key modifying variables were observed, including tripod for scleral incision, tripod-thumb bottom for scleral tunnel, underhand-index to thumb grip for side port, index-contact tripod for corneal entry, and tripodforceps for capsulorhexis. Key differences were noted in thumb placement and number of fingers supporting the instrument, and modifying variables included index finger curvature and amount of flexion.CONCLUSION: Identification of optimal hand positions and development of a formal nomenclature has the potential to help trainees adopt hand positions in an informed manner, influence instrument design, and improve surgical outcomes.

The Effect of the Soil Water Holding Capacity and Permeability under Different Patterns of Land Use in the Eastern Qilian Mountains

This study investigated the effect of the soil water holding capacity and permeability under different land use patterns in the Tianzhu alpine region of the Eastern Qilian Mountains,and four land use patterns were selected,namely,natural grassland,rehabilitated land,oats land and perennial grassland. As time went by,different land use patterns imposed significant effects on the water holding capacity power and permeability. The soil bulk density was rehabilitated land(1. 104 g/cm3) > perennial grassland(1.061g/cm3) > oats land(1.011 g/cm3) > natural grassland(0. 781 g/cm3) ; the soil overall porosity was natural grassland(68.196%) > oats land(60.606%) > perennial grassland(58. 93%) > rehabilitated land(57. 5%) ; the natural grassland had the most water holding capacity power and soil steady infiltration rate(681. 966 t/hm 2 and 3. 02 mm/min) ,while the rehabilitated land had the least(575. 005 t/hm 2 and 1. 004 mm/min) . In terms of soil water-holding capacity and permeability,the natural grassland was the best out of these four use patterns while the rehabilitated land was the worst pattern. In other words,both oats land and perennial grassland had better water holding capacity power and permeability than the rehabilitated land.

Impact of Equity Pledge Behavior on Cash Holdings

Since the promulgation of the Guarantee Law of the People's Republic of China,the pledge of equity in China's capital market is becoming more and more frequent. This paper attempts to study the relationship between equity pledge,the individual behavior of shareholders and cash holding level of enterprises. Based on the data of Shanghai-Shenzhen A-share listed companies in 2009-2016,multiple regression model was established to study the impact of equity pledge behavior on corporate cash holdings. It is found that equity pledge and pledge ratio are significantly negatively correlated with cash holding level. This can effectively alleviate the financial constraints of listed companies in China.

Determinants of corporate cash holdings in tranquil and turbulent period:evidence from an emerging economy

Using a sample of 280 firms listed on the Pakistan Stock Exchange,we empirically investigate factors that determine corporate cash holdings in different periods from 2005 to 2014.We divide the sample into three sub-periods—pre-crisis,crisis,and post-crisis—and apply a panel data model to estimate the results.The results suggest that financial crises affect firms’cash holdings policies.Further,findings show that financial crisis has influenced the relationship of size and leverage with cash holdings.In particular,cash flow,liquidity,and tangibility are major determinants of cash holdings in the sub-periods.We present important implications for corporate managers,academicians,and policymakers.

Jiangsu Light Industrial Products I/E (Holding) Corporation Ltd.

The Jiangsu Light Industrial Products Import and Export (Holding) Corporation Ltd is the first provincial specialized foreign trade corporation in the economic and trade system of Jiangsu Province to practice the holding system. After adopting the holding system in 1993, the corporation saw a total import and export volume of US $ 270 million in that year, with