Homogenate extraction technology of camptothecine and hydroxycamptothecin from Camptotheca acuminata leaves

Camptothecine （CPT） and hydroxycamptothecin （HCPT）, two kinds of anti-cancer alkaloids, were extracted from Camptotheca acuminata leaves using homogenate extraction technology under different conditions such as the ratio of material to liquid, ethanol concentration, and homogenate time. The optimum technology parameters for homogenate extraction of CPT and HCPT from C acuminata leaves were determined as homogenate time at 8 rain, ethanol concentration at 55% and the ratio of material to liquid at 1：15 （g：mL）. By using the optimized parameters, we obtained 0.639‰ extraction rate for CPT and 0.437‰ for HCPT. The extraction yields of CPT and HCPT extracted by homogenating technology were higher than those by other extractive methods, such as ultrasonic, reflux, shaking in water bath. It is concluded that the homogenate extraction technology was an efficient method for extracting CPT and HCPT from C acuminata leaves, with characteristics of less extraction time and high yield.

Epigallocatechin gallate content change of the fresh tea leaf homogenates extracted by different methods in extraction and preservation

The fresh leaves of China green tea, Camellia sinensis, were collected from Fuyang, Zhejiang Province, China, in April. The tea polyphenols was extracted by four different methods （homogenized with distilled water at room temperature, homogenized with 0.3% citric acid （w/v） at room temperature, 5- min boiling and homogenized with distilled water at room temperature, homogenized with 85℃ distilled water）, and after preserving at room temperature, the change of the Epigallocatechin gallate （EGCG） contents of the extracts was investigated. Results indicated that the EGCG content of homogenate extracted with 85℃ distilled water was the highest before the extract was preserved, followed by that of the extract homogenized with 0.3% citric acid at room temperature. During preservation, EGCG content changed obviously. The EGCG contents of homogenates extracted with distilled water at room temperature and 85℃ distilled water declined quickly and separately reduced to 21.52% and 54.6% of their initial contents after preservation for 12 h. The EGCG contents extracted by 0.3% citric acid （w/v） solvent at room temperature and 5- min boiling/homogenized with distilled water at room temperature declined relatively slowly ,and separately reduced to 76.9% and 85.16% of their initial contents after preservation for 12 h. It was also found that the citric acid can prevent the degradation of EGCG and the extract solution color is light green

Homogenate extraction technology of camptothecine and hydroxycamptothecin from Camptotheca acuminata leaves

Camptothecine(CPT) and hydroxycamptothecin(HCPT), two kinds of anti-cancer alkaloids, were extracted from Camptotheca acuminata leaves using homogenate extraction technology under different conditions such as the ratio of material to liquid, ethanol concentration, and homogenate time.The optimum technology parameters for homogenate extraction of CPT and HCPT from C.acuminata leaves were determined as homogenate time at 8 min, ethanol concentration at 55% and the ratio of material to liquid at 1:15(g:mL).By using the optimized parameters, we obtained 0.639‰ extraction rate for CPT and 0.437‰ for HCPT.The extraction yields of CPT and HCPT extracted by homogenating technology were higher than those by other extractive methods, such as ultrasonic, reflux, shaking in water bath.It is concluded that the homogenate extraction technology was an efficient method for extracting CPT and HCPT from C.acuminata leaves, with characteristics of less extraction time and high yield.

Maggot homogenate is associated with neural regeneration and wound healing in the rat

BACKGROUND：Live delivery limits the clinical application of maggot therapy. To date in China, there are no in vivo reports regarding wound healing mechanisms of maggot therapy or the effects of maggot homogenate on wound nerve regeneration.OBJECTIVE：To avoid complications due to the use of live maggots, an aseptic maggot homogenate was applied. Substance P （SP） and gene protein product 9.5 expression in a cutaneous wound was analyzed to explore possible mechanisms of neural regeneration and wound healing in the rat.DESIGN, TIME AND SETTING：A random grouping and controlled animal study was performed at the laboratory of the Department of Orthopedic Surgery, First Affiliated Hospital, Dalian Medical University from August 2008 to April 2009.MATERIALS：Live maggots were cultured and provided by the laboratory of the Department of Orthopedic Surgery of the First Affiliated Hospital, Dalian Medical University, China.METHODS：A total of 48 adult rats were selected and two acute, full-thickness wounds （round, 1.5 cm diameter） were created on the back of each rat. The two wounds were randomly assigned to homogenate product and control groups. Following two-step disinfection of maggots, a homogenate was produced from 10 maggots and applied to the wound area in the homogenate product group, while the wounds in the control group were treated with normal saline alone.MAIN OUTCOME MEASURES：On days 1,3, 7, 10, 14, and 21 following injury, the wound tissue was excised. Histological examination of the wound was observed by hematoxylin and eosin staining or Masson＇s Trichrome staining. SP and protein gene product 9.5 expressions were examined by immunohistochemistry to evaluate wound neural regeneration.RESULTS：On days 7, 10, and 14, the rate of wound healing was significantly greater in the homogenate product group compared with the control group （P 〈 0.05）, and homogenate healing was better than that seen in the control group. On days 3, 7, and 10, SP expression in cells and regenerative nerves was significantly greater in the homogenate product group compared with the control group （P 〈 0.05）. On days 7 and 10, protein gene product 9.5 expression was detected in the regenerative nerve, and expression level was significantly greater in the homogenate product group compared with the control group （P 〈 0.05）.CONCLUSION：Maggot homogenate resulted in upregulated SP and protein gene product 9.5 expressions, thereby promoting neural regeneration and wound healing.

Directional induction of dopaminergic neurons from neural stem cells using substantia nigra homogenates and basic fibroblast growth factor

To date, complex components of available reagents have been used for directional induction of neural stem cells into dopaminergic neurons, resulting in a poor ability to repeat experiments. This study sought to investigate whether a homogenate of the substantia nigra of adult rats and/or basic fibroblast growth factor could directionally induce neural stem cells derived from the subventricular zone of embryonic rats to differentiate into dopaminergic neurons. Tyrosine hydroxylase-positive cells were observed exclusively after induction with the homogenate supernatant of the substantia nigra from adult rats and basic fibroblast growth factor for 48 hours in vitro. However, in the groups treated with homogenate supernatant or basic fibroblast growth factor alone, tyrosine hydroxylase expression was not observed. Moreover, the content of dopamine in the culture medium of subventricular zone neurons was significantly increased at 48 hours after induction with the homogenate supernatant of the substantia nigra from adult rats and basic fibroblast growth factor. Experimental findings indicate that the homogenate supernatant of the substantia nigra from adult rats and basic fibroblast growth factor could directionally induce neural stem cells derived from the subventricular zone of embryonic rats to differentiate into dopaminergic neurons in the substantia nigra with the ability to secrete dopamine.

COMPLETE KAHLER METRICS WITH POSITIVE HOLOMORPHIC SECTIONAL CURVATURES ON CERTAIN LINE BUNDLES(RELATED TO A COHOMOGENEITY ONE POINT OF VIEW ON A YAU CONJECTURE)

In this article,we study Kahler metrics on a certain line bundle over some compact Kahler manifolds to find complete Kahler metrics with positive holomorphic sectional(or bisectional)curvatures.Thus,we apply a strategy to a famous Yau conjecture with a co-homogeneity one geometry.

Catalytic effect in lithium metal batteries: From heterogeneous catalyst to homogenous catalyst

Lithium metal batteries are regarded as prominent contenders to address the pressing needs owing to the high theoretical capacity.Toward the broader implementation,the primary obstacle lies in the intricate multi-electron,multi-step redox reaction associated with sluggish conversion kinetics,subsequently giving rise to a cascade of parasitic issues.In order to smooth reaction kinetics,catalysts are widely introduced to accelerate reaction rate via modulating the energy barrier.Over past decades,a large amount of research has been devoted to the catalyst design and catalytic mechanism exploration,and thus the great progress in electrochemical performance has been realized.Therefore,it is necessary to make a comprehensive review toward key progress in catalyst design and future development pathway.In this review,the basic mechanism of lithium metal batteries is provided along with corresponding advantages and existing challenges detailly described.The main catalysts employed to accelerate cathode reaction with emphasis on their catalytic mechanism are summarized as well.Finally,the rational design and innovative direction toward efficient catalysts are suggested for future application in metal-sulfur/gas battery and beyond.This review is expected to drive and benefit future research on rational catalyst design with multi-parameter synergistic impacts on the activity and stability of next-generation metal battery,thus opening new avenue for sustainable solution to climate change,energy and environmental issues,and the potential industrial economy.

Cryptococcal antigen testing of lung tissue homogenate improves pulmonary cryptococcosis diagnosis:Two case reports

BACKGROUND Pulmonary cryptococcosis(PC)is an opportunistic infectious disease of the respiratory system.Lung tissue biopsies,culture of respiratory samples(e.g.,sputum,lung tissue,pleural fluid,and bronchoalveolar lavage fluid),and cryptococcal antigen(CrAg)testing are helpful for a definitive diagnosis.However,these tests are sometimes falsely negative.PC is often misdiagnosed or underdiagnosed owing to the absence of obvert symptoms,poor imaging specificity,and false-negative laboratory tests.CASE SUMMARY We report two female patients who underwent computed tomography-guided percutaneous needle pulmonary biopsy of a lung nodule for a confirmed diagnosis.In both patients,the CrAg test on the lung biopsy tissue homogenate was positive,while the serum CrAg test was negative.Combined with the lung tissue pathology,we made the diagnosis of PC.Antifungal therapy was effective in both patients.CONCLUSION Given the findings of our cases and the literature review,lung tissue homogenate CrAg testing can be helpful in improving the diagnosis of PC.

The Contribution of United States Aircraft Reconnaissance Data to the China Meteorological Administration Tropical Cyclone Intensity Data:An Evaluation of Homogeneity

This paper investigates the homogeneity of United States aircraft reconnaissance data and the impact of these data on the homogeneity of the tropical cyclone(TC)best track data for the seasons 1949-1987 generated by the China Meteorological Administration(CMA).The evaluation of the reconnaissance data shows that the minimum central sea level pressure(MCP)data are relatively homogeneous,whereas the maximum sustained wind(MSW)data show both overestimations and spurious abrupt changes.Statistical comparisons suggest that both the reconnaissance MCP and MSW were well incorporated into the CMA TC best track dataset.Although no spurious abrupt changes were evident in the reconnaissance-related best track MCP data,two spurious changepoints were identified in the remainder of the best-track MCP data.Furthermore,the influence of the reconnaissance MSWs seems to extend to the best track MSWs unrelated to reconnaissance,which might reflect the optimistic confidence in making higher estimates due to the overestimated extreme wind“observations”.In addition,the overestimation of either the reconnaissance MSWs or the best track MSWs was greater during the early decades compared to later decades,which reflects the important influence of reconnaissance data on the CMA TC best track dataset.The wind-pressure relationship(WPR)used in the CMA TC best track dataset is also evaluated and is found to overestimate the MSW,which may lead to inhomogeneity within the dataset between the aircraft reconnaissance era and the satellite era.

Microstructure homogeneity and mechanical properties of laser-arc hybrid welded AZ31B magnesium alloy

Laser-arc hybrid welding of AZ31B magnesium alloy was carried out,the effects of welding parameters on weld formation,microstructure homogeneity and mechanical properties were investigated.The results showed that laser-arc hybrid welding was beneficial to improve the weld formation of magnesium alloy by inhibiting the defect of undercut and pores.The weld microstructure was mainly columnar grains neighboring the fusion line and equiaxed grains at the weld center.It was interesting that the grain size at the upper arc zone was smaller than that at the lower laser zone,with the difference mainly affected by laser power rather than welding current and welding speed.The welding parameters were optimized as laser power of 3.5 kW,welding current of 100 A and welding speed of 1.5 m/min.In this case,the weld was free of undercut and pores,and the tensile strength and elongation rate reached 252 MPa and 11.2%,respectively.Finally,the microstructure homogeneity was illustrated according to the heat distribution,and the evolution law of tensile properties was discussed basing on the weld formation and microstructure characteristics.

Modeling Method of C/C-ZrC Composites and Prediction of Equivalent Thermal Conductivity Tensor Based on Asymptotic Homogenization

This article proposes a modeling method for C/C-ZrC composite materials.According to the superposition of Gaussian random field,the original gray model is obtained,and the threshold segmentation method is used to generate the C-ZrC inclusion model.Finally,the fiber structure is added to construct the microstructure of the three-phase plain weave composite.The reconstructed inclusions can meet the randomness of the shape and have a uniform distribution.Using an algorithm based on asymptotic homogenization and finite element method,the equivalent thermal conductivity prediction of the microstructure finite element model was carried out,and the influence of component volume fraction on material thermal properties was explored.The sensitivity of model parameters was studied,including the size,mesh sensitivity,Gaussian complexity,and correlation length of the RVE model,and the optimal calculation model was selected.The results indicate that the volume fraction of the inclusion phase has a significant impact on the equivalent thermal conductivity of the material.As the volume fraction of carbon fiber and ZrC increases,the equivalent thermal conductivity tensor gradually decreases.This model can be used to explore the impact of materialmicrostructure on the results,and numerical simulations have studied the relationship between structure and performance,providing the possibility of designing microstructure based on performance.

Highly ordered crystallization of α-FAPbl_(3) films via homogeneous seeds for efficient perovskite solar cells

Formamidine lead triiodide(FAPbI_(3))perovskites have become the most promising photovoltaic materials for perovskite solar cells with record power conversion efficiency(PCE).However,random nucleation,phase transition,and lattice defects are still the key challenges limiting the quality of FAPbI_(3) films.Previous studies show that the introduction or adding of seeds in the precursor is effective to promote the nucleation and crystallization of perovskite films.Nevertheless,the seed-assisted approach focuses on heterogeneous seeds or hetero-composites,which inevitably induce a lattice-mismatch,the genera-tion of strain or defects,and the phase segregation in the perovskite films.Herein,we first demonstrate that high-quality perovskite films are controllably prepared using α-and δ-phases mixed FAPbI_(3) micro-crystal as the homogeneous seeds with the one-step antisolvent method.The partially dissolved seeds with suitable sizes improve the crystallinity of the perovskite flm with preferable orientation,improved carrier lifetime,and increased carrier mobility.More importantly,the α-phase-containing seeds promote the formation of α-phase FAPbI_(3) films,leading to the reduction of residual lattice strain and the suppres-sion of I-ion migration.Besides,the adding of dimethyl 2,6-pyridine dicarboxylate(DPD)into the pre-cursor further suppresses the generation of defects,contributing to the PCE of devices prepared in air ambient being significantly improved to 23.75%,among the highest PCEs for fully air-processed FAPbI_(3) solar cells.The unpackaged target devices possess a high stability,maintaining 80%of the initial PCE under simulated solar illumination exceeding 800 h.

Delineating homogeneous domains of fractured rocks using topological manifolds and deep learning

Determining homogeneous domains statistically is helpful for engineering geological modeling and rock mass stability evaluation.In this text,a technique that can integrate lithology,geotechnical and structural information is proposed to delineate homogeneous domains.This technique is then applied to a high and steep slope along a road.First,geological and geotechnical domains were described based on lithology,faults,and shear zones.Next,topological manifolds were used to eliminate the incompatibility between orientations and other parameters(i.e.trace length and roughness)so that the data concerning various properties of each discontinuity can be matched and characterized in the same Euclidean space.Thus,the influence of implicit combined effect in between parameter sequences on the homogeneous domains could be considered.Deep learning technique was employed to quantify abstract features of the characterization images of discontinuity properties,and to assess the similarity of rock mass structures.The results show that the technique can effectively distinguish structural variations and outperform conventional methods.It can handle multisource engineering geological information and multiple discontinuity parameters.This technique can also minimize the interference of human factors and delineate homogeneous domains based on orientations or multi-parameter with arbitrary distributions to satisfy different engineering requirements.

Microstructure evolution and tensile behavior of balanced Al−Mg−Si alloy with various homogenization parameters

The effects of homogenization parameters on the microstructure evolution and tensile behavior of a balanced Al−Mg−Si alloy were investigated using the optical microscope,scanning electron microscope,X-ray diffraction,electron probe microanalyzer,differential scanning calorimetry,electrical conductivity test,and tensile test.The results show that Mg_(2)Si andβ-AlFeSi are the main intermetallic compounds in the as-cast structure,and Mg solute microsegregation is predominant inside the dendrite cell.The prediction of the full dissolution time of Mg_(2)Si by a kinetic model is consistent with the experiment.Theβ-AlFeSi in the alloy exhibits high thermal stability and mainly undergoes dissolution and coarsening during homogenization at 560℃,and only a small portion is converted toα-AlFeSi.The optimal homogenization parameters are determined as 560℃and 360 min,when considering the evolution of microstructure and resource savings.Both the strength and ductility of the alloy increased after homogenization.

Adaptive detection of range-spread targets in homogeneous and partially homogeneous clutter plus subspace interference

Adaptive detection of range-spread targets is considered in the presence of subspace interference plus Gaussian clutter with unknown covariance matrix.The target signal and interference are supposed to lie in two linearly independent subspaces with deterministic but unknown coordinates.Relying on the two-step criteria,two adaptive detectors based on Gradient tests are proposed,in homogeneous and partially homogeneous clutter plus subspace interference,respectively.Both of the proposed detectors exhibit theoretically constant false alarm rate property against unknown clutter covariance matrix as well as the power level.Numerical results show that,the proposed detectors have better performance than their existing counterparts,especially for mismatches in the signal steering vectors.

Reviewing Stability Criteria for Positive Homogeneous Systems and Adding One for Discrete-Time Cases with Degree Less Than One

The article synthesizes and presents the results regarding the stability of positive homogeneous systems that have been researched and published in recent years. Next, we provide a sufficient condition for global exponential stability in the case of discrete-time positive homogeneous systems with an order less than one with time-varying delays.

Integrated multi-scale approach combining global homogenization and local refinement for multi-field analysis of high-temperature superconducting composite magnets

Second-generation high-temperature superconducting(HTS)conductors,specifically rare earth-barium-copper-oxide(REBCO)coated conductor(CC)tapes,are promising candidates for high-energy and high-field superconducting applications.With respect to epoxy-impregnated REBCO composite magnets that comprise multilayer components,the thermomechanical characteristics of each component differ considerably under extremely low temperatures and strong electromagnetic fields.Traditional numerical models include homogenized orthotropic models,which simplify overall field calculation but miss detailed multi-physics aspects,and full refinement(FR)ones that are thorough but computationally demanding.Herein,we propose an extended multi-scale approach for analyzing the multi-field characteristics of an epoxy-impregnated composite magnet assembled by HTS pancake coils.This approach combines a global homogenization(GH)scheme based on the homogenized electromagnetic T-A model,a method for solving Maxwell's equations for superconducting materials based on the current vector potential T and the magnetic field vector potential A,and a homogenized orthotropic thermoelastic model to assess the electromagnetic and thermoelastic properties at the macroscopic scale.We then identify“dangerous regions”at the macroscopic scale and obtain finer details using a local refinement(LR)scheme to capture the responses of each component material in the HTS composite tapes at the mesoscopic scale.The results of the present GH-LR multi-scale approach agree well with those of the FR scheme and the experimental data in the literature,indicating that the present approach is accurate and efficient.The proposed GH-LR multi-scale approach can serve as a valuable tool for evaluating the risk of failure in large-scale HTS composite magnets.

Homogenization Construction of Three-Level Teaching Bases for General Practice Medicine Under the Internet+Model

With the continuous expansion of medical student enrollment,the number of clinical teaching bases is gradually increasing.However,there are significant differences in clinical teaching management models and teaching levels among different bases.Most clinical teaching bases have incomplete teaching management systems,inadequate teaching management institutions,insufficient teaching personnel,and inadequate implementation of teaching rules and regulations.This article combines the construction practice of three-level clinical teaching base of the General Medicine College and the First Affiliated Hospital of Xi’an Medical University.We establish a standardized management system for the three-level clinical teaching base;implement a teaching supervision system and strengthen the monitoring of teaching quality;adopt multiple evaluations to test the effectiveness of clinical teaching implementation;explore the path of homogenization construction of teaching bases in terms of unified teacher training,promoting the development of teacher teaching abilities with equal quality and excellence,and providing a reference for improving the quality of medical talent training.

On Enforcing Dyadic-type Homogeneous Binary Function Product Constraints in MatBase

Homogeneous binary function products are frequently encountered in the sub-universes modeled by databases,spanning from genealogical trees and sports to education and healthcare,etc.Their properties must be discovered and enforced by the software applications managing such data to guarantee plausibility.The(Elementary)Mathematical Data Model provides 17 types of dyadic-based homogeneous binary function product constraint categories.MatBase,an intelligent data and knowledge base management system prototype,allows database designers to simply declare them by only clicking corresponding checkboxes and automatically generates code for enforcing them.This paper describes the algorithms that MatBase uses for enforcing all 17 types of homogeneous binary function product constraint,which may also be employed by developers without access to MatBase.

Microstructural evolution of ultra-high strength Al-Zn-Cu-Mg-Zr alloy containing Sc during homogenization

The microstructural evolution and composition distribution of an Al-Zn-Cu-Mg-Sc-Zr alloy during homogenization were investigated by optical microscopy（OM）,scanning electron microscopy（SEM）,energy dispersive spectrometry（EDS）,X-ray diffraction（XRD） and differential scanning calorimetry（DSC）.The results show that severe dendritic segregation exists in Al-Zn-Cu-Mg-Sc-Zr alloy ingot.There are a lot of eutectic phases at grain boundary and the distribution of the main elements varies periodically along interdendritic region.The main eutectic phases at grain boundary are Al7Cu2Fe phase and T（Al2Mg3Zn3）.The residual phases are dissolved into the matrix gradually during homogenization with increasing temperature and prolonging holding time,which can be described by a constitutive equation in exponential function.The overburnt temperature of the alloy is 473.9 ℃.The optimum parameters of homogenization are 470 ℃ and 24 h,which is consistent with the result of homogenization kinetic analysis.