Tazhong is the hinterland and a sandstorm high-frequency area of the Taklimakan Desert. However, little is known about the detailed time-series of aeolian sand transport in this area. An experiment to study the sand-d...Tazhong is the hinterland and a sandstorm high-frequency area of the Taklimakan Desert. However, little is known about the detailed time-series of aeolian sand transport in this area. An experiment to study the sand-dust horizontal flux of near-surface was carried out in Tazhong from January to December 2009. By measur- ing the sand-dust horizontal flux throughout sixteen sand-dust weather processes with a 200-cm tall Big Spring Number Eight （BSNE） sampler tower, we quantitatively analyzed the vertical variation of the sand-dust horizontal flux. And the total sand-dust horizontal flux of different time-series that passed through a section of 100 cm in width and 200 cm in height was estimated combining the data of saltation movement continuously recorded by piezo- electric saltation sensors （Sensit）. The results indicated that, in the surface layer ranging from 0-200 cm, the inten- sity of sand-dust horizontal flux decreased with the increase of the height, and the physical quantities obeyed power function well. The total sand-dust horizontal flux of the sixteen sand-dust weather processes that passed through a section of 100 cm in width and 200 cm in height was about 2,144.9 kg, the maximum of one sand-dust weather event was about 396.3 kg, and the annual total sand-dust horizontal flux was about 3,903.2 kg. The high levels of aeolian sand transport occurred during daytime, especially from 13：00 to 16：00 in the afternoon. We try to develop a new method for estimation of the detailed time-series of aeolian sand transport.展开更多
Extreme heat over the North China Plain is typically induced by anomalous descending flows associated with anticyclonic circulation anomalies. However, an extreme heat event that happened in the North China Plain regi...Extreme heat over the North China Plain is typically induced by anomalous descending flows associated with anticyclonic circulation anomalies. However, an extreme heat event that happened in the North China Plain region on 12–13 July 2015,with maximum temperature higher than 40℃ at some stations, was characterized by only a weak simultaneous appearance of an anomalous anticyclone and descending flow, suggesting that some other factor(s) may have induced this heat event. In this study, we used the forecast data produced by the Beijing Rapid Updated Cycling operational forecast system, which predicted the heat event well, to investigate the formation mechanism of this extreme heat event. We calculated the cumulative heat in the mixed-layer air column of North China to represent the change in surface air temperature. The cumulative heat was composed of sensible heat flux from the ground surface and the horizontal heat flux convergence. The results indicated that the horizontal heat flux in the mixed layer played a crucial role in the temporal and spatial distribution of high temperatures.The horizontal heat flux was found to be induced by distinct distributions of air temperatures and horizontal winds at low levels during the two days, implying a complexity of the low-level atmosphere in causing the extreme heat.展开更多
Heat transfer from electrical and electronics component is essential for better performance of that electrical system,The maximum heat transfer from that system results long period durability.In most of the system bas...Heat transfer from electrical and electronics component is essential for better performance of that electrical system,The maximum heat transfer from that system results long period durability.In most of the system base provided for equipments are very small and placed in a very complicated position.so heat transfer by forced convection is not easy for that purpose.The heat transfer by natural convection is the familiar technique used in electronics cooling;there is huge group of apparatus that lends itself to natural convection.This category consist of stand-alone correspondence such as modems and small computers having an array of printed circuit boards(PCB)accumulate within an area.Natural convection heat transfer in heated horizontal duct drive away heat from the interior surface is offered.The duct is open-ended and round in cross section.The test section is heated by provision of heating coils,where constant wall heat flux mentioned.Heat transfer experiment is carried out for channel of 50 mm.internal diameter and 4 mm thickness with length 600 mm.Ratios of length to diameter of the channel are taken as L/D=12.Wall heat fluxes maintained at q//=300 W/m2 to 3150 W/m2.A methodical investigational record for the local steady state natural convection heat transfer activities is obtained.The wall heating condition on local steady-state heat transfer phenomena are studied.The present experimental data is compared with the existing theoretical and experimental results for the cases of vertical smooth tubes.展开更多
TOPEX/POSEIDON altimeter data from October 1992 to June 2002 are used to calculate the global barotropic M2 tidal currents using long-term tidal harmonic analysis. The tides calculated agree well with ADCP data obtain...TOPEX/POSEIDON altimeter data from October 1992 to June 2002 are used to calculate the global barotropic M2 tidal currents using long-term tidal harmonic analysis. The tides calculated agree well with ADCP data obtained from the South China Sea (SCS). The maximum tide velocities along the semi-major axis and semi-minor axis can be computed from the tidal ellipse. The global distribution of M2 internal tide vertical energy flux from the sea bottom is calculated based on a linear internal wave generation model. The global vertical energy flux of M2 internal tide is 0.96 TW, with 0.36 TW in the Pacific, 0.31 TW in the Atlantic and 0.29 TW in the Indian Ocean, obtained in this study. The total horizontal energy flux of M2 internal tide radiating into the open ocean from the lateral boundaries is 0.13 TW, with 0.06 TW in the Pacific, 0.04TW in the Atlantic, and 0.03 TW in the Indian Ocean. The result shows that the principal lunar semi-diurnal tide M2 provides enough energy to maintain the large-scale thermohaline circulation of the ocean.展开更多
The transport and diffusion of substances in seawater are limited by the mixing motion of water bodies,while the main forms of mixing in offshore water bodies are advection and eddy diffusion.The eddy diffusion proces...The transport and diffusion of substances in seawater are limited by the mixing motion of water bodies,while the main forms of mixing in offshore water bodies are advection and eddy diffusion.The eddy diffusion process of water indicates the possible transport direction of dissolved substances.However,the complex environment in the coastal zone makes it difficult to quantitatively assess the water diffusion process.^(222)Rn is a useful tool to trace the diffusion process of water bodies.However,studies on the^(222)Rn distribution and its behavior in the Beibu Gulf are scarce.In this study,the activity distribution characteristics of^(222)Rn in surface seawater of the Guangxi shelf area of the Beibu Gulf were measured.Based on the one-dimensional,steady-state model,the vorticity diffusion coefficient of^(222)Rn in the horizontal direction was calculated as(0.42−2.13)×10^(8) m^(2)/d,and the offshore fluxes of^(222)Rn under the influence of water mixing were calculated as 2.00×10^(12) Bq/d.Correspondingly,the horizontal transport fluxes of silicate,phosphate,nitrite and nitrate were 6.28×10^(−3)mol/(m^(2)·d),0.10×10^(−3)mol/(m^(2)·d),0.20×10^(−3)mol/(m^(2)·d)and 4.15×10^(−3)mol/(m^(2)·d),respectively.These results indicate that the study of eddy current diffusion in offshore marine water facilitates a deeper understanding of the water mixing process and nutrient transport and migration.展开更多
本文利用DPM(Dust Production Model)模型模拟计算了我国北方沙漠地区不同的土壤微团粒在不同的地表粗糙度和地表摩擦风速下的水平跃移通量、粉尘释放通量、粉尘释放效率以及在特定量中粉尘粒子的质量和数浓度的分布,并对上述计算结果...本文利用DPM(Dust Production Model)模型模拟计算了我国北方沙漠地区不同的土壤微团粒在不同的地表粗糙度和地表摩擦风速下的水平跃移通量、粉尘释放通量、粉尘释放效率以及在特定量中粉尘粒子的质量和数浓度的分布,并对上述计算结果进行了讨论和分析。通过与实际观测结果进行对比的粗糙度和地表摩擦风速下粉尘释放通量后发现二者基本一致,从而证明了DPM模型是可以用来初步模拟中国北方沙漠地区的粉尘释放过程,这将有利于进一步较准确得模拟沙尘的输送、沉降以及气候效应。展开更多
基金funded by the National Natural Science Foundation of China (41175017)the Central Scientific Research Institute of the public basic scientific research business professional ( IDM201103)the R&D Special Fund for Public Welfare Industry (Meteorology)(GYHY201106025)
文摘Tazhong is the hinterland and a sandstorm high-frequency area of the Taklimakan Desert. However, little is known about the detailed time-series of aeolian sand transport in this area. An experiment to study the sand-dust horizontal flux of near-surface was carried out in Tazhong from January to December 2009. By measur- ing the sand-dust horizontal flux throughout sixteen sand-dust weather processes with a 200-cm tall Big Spring Number Eight （BSNE） sampler tower, we quantitatively analyzed the vertical variation of the sand-dust horizontal flux. And the total sand-dust horizontal flux of different time-series that passed through a section of 100 cm in width and 200 cm in height was estimated combining the data of saltation movement continuously recorded by piezo- electric saltation sensors （Sensit）. The results indicated that, in the surface layer ranging from 0-200 cm, the inten- sity of sand-dust horizontal flux decreased with the increase of the height, and the physical quantities obeyed power function well. The total sand-dust horizontal flux of the sixteen sand-dust weather processes that passed through a section of 100 cm in width and 200 cm in height was about 2,144.9 kg, the maximum of one sand-dust weather event was about 396.3 kg, and the annual total sand-dust horizontal flux was about 3,903.2 kg. The high levels of aeolian sand transport occurred during daytime, especially from 13：00 to 16：00 in the afternoon. We try to develop a new method for estimation of the detailed time-series of aeolian sand transport.
基金sponsored by the Ministry of Science and Technology of China (Grant No.2015DFA20870)
文摘Extreme heat over the North China Plain is typically induced by anomalous descending flows associated with anticyclonic circulation anomalies. However, an extreme heat event that happened in the North China Plain region on 12–13 July 2015,with maximum temperature higher than 40℃ at some stations, was characterized by only a weak simultaneous appearance of an anomalous anticyclone and descending flow, suggesting that some other factor(s) may have induced this heat event. In this study, we used the forecast data produced by the Beijing Rapid Updated Cycling operational forecast system, which predicted the heat event well, to investigate the formation mechanism of this extreme heat event. We calculated the cumulative heat in the mixed-layer air column of North China to represent the change in surface air temperature. The cumulative heat was composed of sensible heat flux from the ground surface and the horizontal heat flux convergence. The results indicated that the horizontal heat flux in the mixed layer played a crucial role in the temporal and spatial distribution of high temperatures.The horizontal heat flux was found to be induced by distinct distributions of air temperatures and horizontal winds at low levels during the two days, implying a complexity of the low-level atmosphere in causing the extreme heat.
文摘Heat transfer from electrical and electronics component is essential for better performance of that electrical system,The maximum heat transfer from that system results long period durability.In most of the system base provided for equipments are very small and placed in a very complicated position.so heat transfer by forced convection is not easy for that purpose.The heat transfer by natural convection is the familiar technique used in electronics cooling;there is huge group of apparatus that lends itself to natural convection.This category consist of stand-alone correspondence such as modems and small computers having an array of printed circuit boards(PCB)accumulate within an area.Natural convection heat transfer in heated horizontal duct drive away heat from the interior surface is offered.The duct is open-ended and round in cross section.The test section is heated by provision of heating coils,where constant wall heat flux mentioned.Heat transfer experiment is carried out for channel of 50 mm.internal diameter and 4 mm thickness with length 600 mm.Ratios of length to diameter of the channel are taken as L/D=12.Wall heat fluxes maintained at q//=300 W/m2 to 3150 W/m2.A methodical investigational record for the local steady state natural convection heat transfer activities is obtained.The wall heating condition on local steady-state heat transfer phenomena are studied.The present experimental data is compared with the existing theoretical and experimental results for the cases of vertical smooth tubes.
基金Supported by the National Basic Research Program of China (973 Program, No. 2005CB422303)the International Cooperation Program (No. 2004DFB02700)+1 种基金the National Natural Science Foundation of China (No. 40552002)The TOPEX/POSEIDON data are provided by Physical Oceanography Distributed Active Archive Center (PO DACC)
文摘TOPEX/POSEIDON altimeter data from October 1992 to June 2002 are used to calculate the global barotropic M2 tidal currents using long-term tidal harmonic analysis. The tides calculated agree well with ADCP data obtained from the South China Sea (SCS). The maximum tide velocities along the semi-major axis and semi-minor axis can be computed from the tidal ellipse. The global distribution of M2 internal tide vertical energy flux from the sea bottom is calculated based on a linear internal wave generation model. The global vertical energy flux of M2 internal tide is 0.96 TW, with 0.36 TW in the Pacific, 0.31 TW in the Atlantic and 0.29 TW in the Indian Ocean, obtained in this study. The total horizontal energy flux of M2 internal tide radiating into the open ocean from the lateral boundaries is 0.13 TW, with 0.06 TW in the Pacific, 0.04TW in the Atlantic, and 0.03 TW in the Indian Ocean. The result shows that the principal lunar semi-diurnal tide M2 provides enough energy to maintain the large-scale thermohaline circulation of the ocean.
基金The Scientific Research Foundation of the Third Institute of Oceanography,Ministry of Natural Resources under contract Nos 2023007 and 2020017the Natural Science Foundation of Fujian Province under contract No.2020J05010+1 种基金the Foundation of Xiamen Institute of Marine Development under contract No.KFY202204the Asian Cooperation Fund Project-Study on Typical Bay Ecological Protection and Management Demonstration.
文摘The transport and diffusion of substances in seawater are limited by the mixing motion of water bodies,while the main forms of mixing in offshore water bodies are advection and eddy diffusion.The eddy diffusion process of water indicates the possible transport direction of dissolved substances.However,the complex environment in the coastal zone makes it difficult to quantitatively assess the water diffusion process.^(222)Rn is a useful tool to trace the diffusion process of water bodies.However,studies on the^(222)Rn distribution and its behavior in the Beibu Gulf are scarce.In this study,the activity distribution characteristics of^(222)Rn in surface seawater of the Guangxi shelf area of the Beibu Gulf were measured.Based on the one-dimensional,steady-state model,the vorticity diffusion coefficient of^(222)Rn in the horizontal direction was calculated as(0.42−2.13)×10^(8) m^(2)/d,and the offshore fluxes of^(222)Rn under the influence of water mixing were calculated as 2.00×10^(12) Bq/d.Correspondingly,the horizontal transport fluxes of silicate,phosphate,nitrite and nitrate were 6.28×10^(−3)mol/(m^(2)·d),0.10×10^(−3)mol/(m^(2)·d),0.20×10^(−3)mol/(m^(2)·d)and 4.15×10^(−3)mol/(m^(2)·d),respectively.These results indicate that the study of eddy current diffusion in offshore marine water facilitates a deeper understanding of the water mixing process and nutrient transport and migration.
文摘本文利用DPM(Dust Production Model)模型模拟计算了我国北方沙漠地区不同的土壤微团粒在不同的地表粗糙度和地表摩擦风速下的水平跃移通量、粉尘释放通量、粉尘释放效率以及在特定量中粉尘粒子的质量和数浓度的分布,并对上述计算结果进行了讨论和分析。通过与实际观测结果进行对比的粗糙度和地表摩擦风速下粉尘释放通量后发现二者基本一致,从而证明了DPM模型是可以用来初步模拟中国北方沙漠地区的粉尘释放过程,这将有利于进一步较准确得模拟沙尘的输送、沉降以及气候效应。
