Metalizing reduction and magnetic separation of vanadium titano-magnetite based on hot briquetting

To achieve high efficiency utilization of Panzhihua vanadium titano-magnetite, a new process of metalizing reduction and magnetic separation based on hot briquetting is proposed, and factors that affect the cold strength of the hot-briquetting products and the efficiency of reduction and magnetic separation are successively investigated through laboratory experiments. The relevant mechanisms are elucidated on the basis of microstructural observations. Experimental results show that the optimal process parameters for hot briquetting include a hot briquetting temperature of 475°C, a carbon ratio of 1.2, ore and coal particle sizes of less than 74 μm. Additionally, with respect to metalizing reduction and magnetic separation, the rational parameters include a magnetic field intensity of 50 mT, a reduction temperature of 1350°C, a reduction time of 60 min, and a carbon ratio of 1.2. Under these above conditions, the crushing strength of the hot-briquetting agglomerates is 1480 N, and the recovery ratios of iron, vanadium, and titanium are as high as 91.19%, 61.82%, and 85.31%, respectively. The new process of metalizing reduction and magnetic separation based on hot briquetting demonstrates the evident technological advantages of high efficiency separation of iron from other valuable elements in the vanadium titano-magnetite.

Thermal and chemical analysis of massive use of hot briquetted iron inside basic oxygen furnace

The integrated steelmaking cycle based on the blast furnace-basic oxygen furnace（BOF）route plays an important role in the production of plain and ultra-low carbon steel,especially for deep drawing operations.BOF steelmaking is based on the conversion of cast iron in steel by impinging oxygen on the metal bath at supersonic speed.In order to avoid the addition of detrimental chemical elements owing to the introduction of uncontrolled scrap and in order to decrease environmental impact caused by the intensive use of coke for the production of cast iron,HBI（hot briquetted iron）can be used as a source of metal and a fraction of cast iron.Forty industrial experimental tests were performed to evaluate the viability of the use of HBI in BOF.The experimental campaign was supported by a thermal prediction model and realized through the estimation of the oxidation enthalpy.Furthermore,the process was thermodynamically analyzed based on oxygen potentials using the off-gas composition and the bath temperature evolution during the conversion as reference data.