Baosteel’s first BTW1 austenitic high-manganese wear-resistant steel exhibits strong deformation-induced hardening characteristics.Compared with common low-alloy martensitic wear-resistant steels in the market, it ha...Baosteel’s first BTW1 austenitic high-manganese wear-resistant steel exhibits strong deformation-induced hardening characteristics.Compared with common low-alloy martensitic wear-resistant steels in the market, it has improved impact wear resistance, hard abrasive wear, erosion wear performance, and impact toughness.The metallurgical properties of such austenitic wear-resistant steel lead to the risk of failure because of hot cracking defects in the welded structure.In wear-resistant applications, evaluating hot cracking susceptibility is necessary to avoid the effect of welding defects.In this study, the Varestraint test is used to quantitatively analyze and evaluate the hot cracking susceptibility of BTW1 austenitic high-manganese wear-resistant steel.The test results show that by controlling the content of impurity elements and grain refinement, BTW1 austenitic high-manganese wear-resistant steel effectively reduces hot cracking tendency and has a low incidence of hot cracking under small strain conditions.The developed matching welding process can effectively avoid the influence of hot cracking susceptibility.展开更多
A novel Ni-based superalloy GH4151,with a γ′ volume fraction of about 55%and a service temperature capability up to 8oo oC,was investigated.Due to the different cooling conditions of various regions during the solid...A novel Ni-based superalloy GH4151,with a γ′ volume fraction of about 55%and a service temperature capability up to 8oo oC,was investigated.Due to the different cooling conditions of various regions during the solidification of ingots,significant cooling rate variations may lead to the occurrence of hot cracking.Conventional scanning laser microscope was utilised to investigate the solidification process and phase precipitation behaviour of the GH4151 under wide range cooling rates.The characteristics of L→γ transformation were analysed,and the growth rates of at each stage were calculated.The segregation behaviour was predicted using the Scheil equation,and the predicted results match well with the experimental results.The sensitivity coefficient for hot cracking was modified,and cracking sensitivity coefficient values for the alloy under different cooling rates were computed,revealing that the alloy is most susceptible to hot cracking at 10℃/min cooling rate.Therefore,controlling the cooling rate can reduce the possibility of hot cracking in ingot.展开更多
文摘Baosteel’s first BTW1 austenitic high-manganese wear-resistant steel exhibits strong deformation-induced hardening characteristics.Compared with common low-alloy martensitic wear-resistant steels in the market, it has improved impact wear resistance, hard abrasive wear, erosion wear performance, and impact toughness.The metallurgical properties of such austenitic wear-resistant steel lead to the risk of failure because of hot cracking defects in the welded structure.In wear-resistant applications, evaluating hot cracking susceptibility is necessary to avoid the effect of welding defects.In this study, the Varestraint test is used to quantitatively analyze and evaluate the hot cracking susceptibility of BTW1 austenitic high-manganese wear-resistant steel.The test results show that by controlling the content of impurity elements and grain refinement, BTW1 austenitic high-manganese wear-resistant steel effectively reduces hot cracking tendency and has a low incidence of hot cracking under small strain conditions.The developed matching welding process can effectively avoid the influence of hot cracking susceptibility.
基金supported by the National Science and Technology Major Project(J2019-VI-0006-0120)National Natural Science Foundation of China(52074092).
文摘A novel Ni-based superalloy GH4151,with a γ′ volume fraction of about 55%and a service temperature capability up to 8oo oC,was investigated.Due to the different cooling conditions of various regions during the solidification of ingots,significant cooling rate variations may lead to the occurrence of hot cracking.Conventional scanning laser microscope was utilised to investigate the solidification process and phase precipitation behaviour of the GH4151 under wide range cooling rates.The characteristics of L→γ transformation were analysed,and the growth rates of at each stage were calculated.The segregation behaviour was predicted using the Scheil equation,and the predicted results match well with the experimental results.The sensitivity coefficient for hot cracking was modified,and cracking sensitivity coefficient values for the alloy under different cooling rates were computed,revealing that the alloy is most susceptible to hot cracking at 10℃/min cooling rate.Therefore,controlling the cooling rate can reduce the possibility of hot cracking in ingot.
