期刊文献+
共找到215篇文章
< 1 2 11 >
每页显示 20 50 100
Application of WC cermet sprayed composite coating in hot-dip galvanizing lines
1
作者 YU Jilai Li Qingsheng WANG Lu 《Baosteel Technical Research》 CAS 2015年第1期8-12,共5页
With the rapid development of the automobile industry, the use of galvannealed and galvanized steel sheets in automobiles is on the rise. These sheets must meet very high surface quality requirements. The surface trea... With the rapid development of the automobile industry, the use of galvannealed and galvanized steel sheets in automobiles is on the rise. These sheets must meet very high surface quality requirements. The surface treatment of line rolls is known to have a great impact on strip quality. To prevent dusts such as zinc ash from pressing into the strip surface, we used a composite thermal spray surface treatment technique to treat rolls. The successfully developed tungsten carbide (WC) + Ni-P composite plating technology improved the quality of the tungsten carbide thermally sprayed WC roll surface. This technique is also helpful to control defects such as adhered foreign materials in hot-dip galvanized automobile outer panel surfaces. 展开更多
关键词 hot-dip galvanizing line automotive sheet WC composite thermal spraying process roll
下载PDF
Development and application of a neural network based coating weight control system for a hot-dip galvanizing line 被引量:1
2
作者 Zai-sheng PAN Xuan-hao ZHOU Peng CHEN 《Frontiers of Information Technology & Electronic Engineering》 SCIE EI CSCD 2018年第7期834-846,共13页
The hot-dip galvanizing line(HDGL) is a typical order-driven discrete-event process in steelmaking. It has some complicated dynamic characteristics such as a large time-varying delay, strong nonlinearity, and unmeasur... The hot-dip galvanizing line(HDGL) is a typical order-driven discrete-event process in steelmaking. It has some complicated dynamic characteristics such as a large time-varying delay, strong nonlinearity, and unmeasured disturbance, all of which lead to the difficulty of an online coating weight controller design. We propose a novel neural network based control system to solve these problems. The proposed method has been successfully applied to a real production line at Va Lin LY Steel Co., Loudi, China. The industrial application results show the effectiveness and efficiency of the proposed method, including significant reductions in the variance of the coating weight and the transition time. 展开更多
关键词 Neural network hot-dip galvanizing line (HDGL) Coating weight control
原文传递
Investigation and improvement of tiny spot defects on hot-dip galvanized automotive steel sheets
3
作者 GE Zhiyong YANG Bo YANG Jiwu 《Baosteel Technical Research》 CAS 2024年第2期32-38,共7页
The causes of tiny spot defects on the surface of hot-dip galvanized automotive steel sheets were studied using scanning electron microscopy(SEM)and energy dispersive spectrometer(EDS),and effective control measures w... The causes of tiny spot defects on the surface of hot-dip galvanized automotive steel sheets were studied using scanning electron microscopy(SEM)and energy dispersive spectrometer(EDS),and effective control measures were introduced.The results show that rubbing against the top roller after galvanizing is easy due to the local thickness of tiny spot defect location coating;therefore,the surface morphology is different from the normal part.Three kinds of defects,namely zinc slag,small slivers,and pitting,are likely to cause local thickening of the coating after galvanizing,leading to the formation of tiny spots.Therefore,resolving the three types of defects can effectively control the generation of tiny spot defects.Among them,due to the hereditary nature of the small sliver defect,focusing on its control and supervision is necessary. 展开更多
关键词 hot-dip galvanizing tiny spot zinc slag PITTING small sliver
下载PDF
Recent development of UHSS and its hot-dip galvanizing processes in Baosteel 被引量:1
4
作者 JIN Xinyan WANG Li 《Baosteel Technical Research》 CAS 2023年第1期2-10,共9页
Baosteel has excelled in automotive steel sheets in the past three decades.It has made a significant contribution to the development of China’s automotive industry by producing a wide range of high-quality steel prod... Baosteel has excelled in automotive steel sheets in the past three decades.It has made a significant contribution to the development of China’s automotive industry by producing a wide range of high-quality steel products.Some milestones achieved by Baosteel automotive steel sheet were briefly reviewed.The current challenges in producing ultra-high strength steel(UHSS),especially hot-dip galvanized UHSS,were summarized.The most current advancements in UHSS and the corresponding hot-dip galvanizing processes were discussed.The galvanizability of Si-Mn-added QP steel and DP steel, Mn-added TWIP steel, and Al-added low-density steel has been improved by different techniques in Baosteel. 展开更多
关键词 ultra-high strength steel(UHSS) hot-dip galvanizing automotive steel sheet BAOSTEEL
下载PDF
Innovative integrating of hot-dipped(aluminizing) galvanizing lines and engineering of related equipment
5
作者 CHENG Liangjian,DU Jun,HOU Ligang,ZHUANG Guowei, WANG Fukai,WEI Wei and LU Zhiyi Baosteel Engineering & Technology Group Co.,Ltd.,Shanghai 201900,China 《Baosteel Technical Research》 CAS 2010年第S1期115-,共1页
Based on the continuous hot(aluminizing) galvanizing lines and related non-standard equipment of Meishan Steel,this paper presents the main contents of such integrated engineering and designing of equipment for the tw... Based on the continuous hot(aluminizing) galvanizing lines and related non-standard equipment of Meishan Steel,this paper presents the main contents of such integrated engineering and designing of equipment for the two hot-dipped galvanizing lines,as well as innovative techniques and their features.Led by Cold Rolling Project Department of Meishan Steel,Baosteel Engineering and Technology Group Co.,Ltd. ,working as the responsible unit of this project,develops key technologies and integrates the system by combining the equipment design and development capacity of Baosteel Engineering,research and development capacity of Research Institute of Baosteel,process production and equipment maintenance experience of Cold Rolling Plant,Equipment Department and Manufacture Department of Baosteel Corporation.Core technologies of the two lines are developed and designed through original and integrated innovation and innovation after digestion,focusing on eight core techniques in process equipment,annealing furnace,fluid installation and EIC system.As a result of integration in key process equipment,industrial furnace and EIC control,the cold rolling hot dipped(aluminizing) galvanizing lines take on a new look and reach an annual capacity of 200 000 t galvanized products and 250 000 t galvanized aluminium base strips respectively.These two world advanced lines are able to produce hot-dipped galvanizing products with high quality surface and fine shape,such as household appliance board and senior construction board.As a result, the process and equipment technology of the lines have formed domestic intellectual property.Thus,the technology has reference value for self-integration and equipment technology innovation of similar lines. 展开更多
关键词 hot galvanizing lines project innovative integration research on equipment INNOVATION
下载PDF
Effect of hot-dip galvanizing processes on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel 被引量:3
6
作者 Chun-fu Kuang Zhi-wang Zheng +2 位作者 Min-li Wang Quan Xu Shen-gen Zhang 《International Journal of Minerals,Metallurgy and Materials》 SCIE EI CAS CSCD 2017年第12期1379-1383,共5页
A C–Mn dual-phase steel was soaked at 800°C for 90 s and then either rapidly cooled to 450°C and held for 30 s(process A) or rapidly cooled to 350°C and then reheated to 450°C(process B) to simula... A C–Mn dual-phase steel was soaked at 800°C for 90 s and then either rapidly cooled to 450°C and held for 30 s(process A) or rapidly cooled to 350°C and then reheated to 450°C(process B) to simulate the hot-dip galvanizing process. The influence of the hot-dip galvanizing process on the microstructure and mechanical properties of 600-MPa hot-dip galvanized dual-phase steel(DP600) was investigated using optical microscopy, scanning electron microscopy(SEM), transmission electron microscopy(TEM), and tensile tests. The results showed that, in the case of process A, the microstructure of DP600 was composed of ferrite, martensite, and a small amount of bainite. The granular bainite was formed in the hot-dip galvanizing stage, and martensite islands were formed in the final cooling stage after hot-dip galvanizing. By contrast, in the case of process B, the microstructure of the DP600 was composed of ferrite, martensite, bainite, and cementite. In addition, compared with the yield strength(YS) of the DP600 annealed by process A, that for the DP600 annealed by process B increased by approximately 50 MPa because of the tempering of the martensite formed during rapid cooling. The work-hardening coefficient(n value) of the DP600 steel annealed by process B clearly decreased because the increase of the YS affected the computation result for the n value. However, the ultimate tensile strength(UTS) and elongation(A80) of the DP600 annealed by process B exhibited less variation compared with those of the DP600 annealed by process A. Therefore, DP600 with excellent comprehensive mechanical properties(YS = 362 MPa, UTS = 638 MPa, A_(80) = 24.3%, n = 0.17) was obtained via process A. 展开更多
关键词 hot-dip galvanizing process DUAL-PHASE STEEL MICROSTRUCTURE mechanical properties
下载PDF
Preparation and hot-dip galvanizing application of CeO_2/Zn nanocomposite 被引量:1
7
作者 骆心怡 左敦稳 +2 位作者 王珉 李顺林 常华 《中国有色金属学会会刊:英文版》 CSCD 2005年第S3期203-207,共5页
CeO2/Zn nanocomposite was fabricated by high-energy ball milling and subsequent hot-press sintering under vacuum. The produced nanocomposite powders and bulks were characterized using X-ray diffraction (XRD), transm... CeO2/Zn nanocomposite was fabricated by high-energy ball milling and subsequent hot-press sintering under vacuum. The produced nanocomposite powders and bulks were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM) with an energy dispersive X-ray spectrum (EDS). The as-fabricated nanocomposite bulks were added successfully into the hot-dip galvanizing bath to improve the corrosion resistance of coatings. The results show that after milling for 120min, nano-sized CeO2 particles are distributed homogeneously on the surface of fine Zn particles to form spherical-like nanocomposite powder with narrow grain size distribution. The subsequent sintering does not lead to a dramatic grain growth, and the distribution of CeO2 nanoparticles in the composite bulk is also homogeneous. With the addition of as-prepared bulks, the corrosion resistance of the galvanized coatings is improved obviously. It provides a feasible route for adding CeO2 nanoparticles into the hot-dip galvanized coating. 展开更多
关键词 NANOCOMPOSITE HIGH-ENERGY BALL MILLING hot-press SINTERING hot-dip galvanizing corrosion resistance
下载PDF
The Influence of Al on the Surface Properties of the Hot-dip Galvanized Melt 被引量:3
8
作者 LI Zhiwei RUAN Ruiwen +5 位作者 XI Shiheng WANG Jianhua LEI Yun DENG Song SU Xuping PENG Haoping 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2022年第1期117-122,共6页
Wettability of Zn-Al alloy melt on the pure iron substrate at 450℃was studied.The effect of Al content(Zn,Zn-1Al,Zn-2Al,Zn-3Al,Zn-4Al,and Zn-5Al)on the wetting behavior and interfacial reaction was investigated by hi... Wettability of Zn-Al alloy melt on the pure iron substrate at 450℃was studied.The effect of Al content(Zn,Zn-1Al,Zn-2Al,Zn-3Al,Zn-4Al,and Zn-5Al)on the wetting behavior and interfacial reaction was investigated by high-temperature contact angle measuring device and scanning electron microscope(SEM).The results show that,with the increase of Al content,the initial contact angle of the molten alloy on the substrate decreases gradually and the wettability increases gradually.Compared with the initial contact angle,the final contact angle is slightly reduced,because the Fe-Al inhibition layer is preferentially formed at the interface when adding Al to the alloy.The presence of Al will promote the occurrence of the reactive wetting,leading to an insignificant wetting spreading process,and the final contact angle negligibly differs from the initial contact angle.The adhesion work and charge density distributions of interface systems were calculated based on the first-principles.The results show that the adhesion work of the Fe/Zn and Fe/(Zn-Al)interface model is 2.0171 J/m^(2)and 13.7944 J/m^(2),respectively.The addition of Al greatly increases the adhesion work between alloy melt and iron substrate.Compared with the Zn-Fe and Al-Fe interface models,it can be seen that a significant charge migration phenomenon occurs between the interfaces.The amount of charge migration in the Al-Fe interface model is much larger than that in the Zn-Fe interface model,indicating that the bonding between Al-Fe atoms can occur more easily and the interaction between Al-Fe interfaces is stronger.This is also the reason why the addition of Al increases the adhesion work between interfaces. 展开更多
关键词 hot-dip galvanized contact angle adhesion work first principles
下载PDF
Hot-Dip Galvanized Sheet Production and Application 被引量:1
9
作者 BIAN Jun LIU Xiang-hua WANG Guo-dong 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2003年第1期55-58,共4页
Hot-dip galvanized sheet is wildly used in construction,household appliances,ship,vehicle and vessel building and machinery,etc.In last ten years,with the development of automobile industry,the anti-eorrosion requirem... Hot-dip galvanized sheet is wildly used in construction,household appliances,ship,vehicle and vessel building and machinery,etc.In last ten years,with the development of automobile industry,the anti-eorrosion requirements for car body are increasingly strict,by which the rapid development in technology has been promoted.The application of hot-dip galvanized sheet,technological progress in production and some Chinese large units were introduced. 展开更多
关键词 hot-dip galvanized sheet technological progress APPLICATION
下载PDF
Analysis of causes and influence factors of small black spot defects in hot-dip galvanized pure Zn products 被引量:3
10
作者 LI Qingsheng WANG Lu 《Baosteel Technical Research》 CAS 2016年第2期7-13,共7页
In this study,the factors affecting the formation of small black spot defects on the surface of a hot-dip galvanized pure zinc strip are analyzed. These defects are primarily formed w hen the iron-aluminum inhibition ... In this study,the factors affecting the formation of small black spot defects on the surface of a hot-dip galvanized pure zinc strip are analyzed. These defects are primarily formed w hen the iron-aluminum inhibition layer is incompletely formed or fails to form or when foreign matter adheres to the surface or embeds in the zinc layer.The defects can be reduced by controlling the cleanliness and activity of the strip base before coating,regulating the zinc pot process parameters,and ensuring the cleanliness of the passline and workshop. 展开更多
关键词 hot-dip galvanizing small black spot automotive sheet
下载PDF
An On-line Galvanic Cell Generated Electrochemiluminescence and Flow Injection Determination of Calcium in Milk and Vegetable 被引量:1
11
《Chinese Chemical Letters》 SCIE CAS CSCD 2003年第6期599-602,共4页
An on-line Ag/Al galvanic cell is investigated and employed to generate electrochemiluminescence (ECL). The potential of the galvanic cell could be adjusted by varying the components of flow reagent. The cell perfor... An on-line Ag/Al galvanic cell is investigated and employed to generate electrochemiluminescence (ECL). The potential of the galvanic cell could be adjusted by varying the components of flow reagent. The cell performed perfect capability of supplying a stable potential for ECL generation. Based on the weak ECL of calcein blue could be greatly sensitized by the presence of calcium in alkaline solution, calcium contents in milk samples and in cabbage were assayed and the results were compared with those from ICP-AES method. 展开更多
关键词 On-line galvanic cell ELECTROCHEMILUMINESCENCE calcium.
下载PDF
Development of Cr-free anti-fingerprint hot-dip galvanized sheet for household appliances
12
作者 YANG Peng~(1)) and PAN Yanfang~(2)) 1) Cold Rolling General Plant,Wuhan Iron & Steel Co..Ltd.,Hubei 430083,Wuhan,China 2) Manufacturing Department,Wuhan Iron & Steel Co.,Ltd.,Hubei 430083,Wuhan,China 《Baosteel Technical Research》 CAS 2010年第S1期44-,共1页
China has become the maximum household appliances manufacturing base worldwide.It is a new challenge facing the steel industry to develop the low-cost and environment-friendly sheet for household appliance industry,so... China has become the maximum household appliances manufacturing base worldwide.It is a new challenge facing the steel industry to develop the low-cost and environment-friendly sheet for household appliance industry,so Cr-free anti-fingerprint hot-dip galvanized sheet for household appliances is the upgraded product which satisfies the requirement of China household appliance industry' s nuisanceless treatment.The paper discusses the technical key points of development on Cr-free anti-fingerprint galvanized sheet for household appliances,including the development of the Cr-free anti-fingerprint chemical and the production technology of Cr-free anti-fingerprint galvanized sheet for household appliances.The paper elaborates the main compositions,physical features and properties of the Cr-free anti-fingerprint chemical, surface quality control technology,anti-fingerprint coating quality control technology,influence of anti-fingerprint film weight on corrosion resistance,conductibility,high-temperature discolouration resistance,acid resistance,alkaline resistance and solvent resistance of Cr-free anti-fingerprint hot-dip galvanized sheet, influence of anti-fingerprint coating uniformity on paintability of the sheet,influence of strip surface roughness on corrosion resistance and conductivity of the sheet and influence of strip surface quality on corrosion resistance of the sheet.Adopting the suitable Cr-free anti-fingerprint chemical and the reasonable production process parameters,the properties of the Cr-free anti-fingerprint hot-dip galvanized sheet conform to the delivery technical norms and the Cr-free anti-fingerprint hot-dip galvanized sheet becomes the new material for household appliances such as computer case. 展开更多
关键词 household appliances Cr-free anti-fingerprint hot-dip galvanized sheet
下载PDF
Evolution of appearance profile of hot-dip galvanized car-body steel sheet during deformation process
13
作者 ZHAO Yanliang SHI Jinzhong DAI Yigang 《Baosteel Technical Research》 CAS 2017年第2期30-36,共7页
In recent years, the waterborne free intermediate coating process has been widely used in the automotive industry. Because the baking times and coating thickness are decreased, the surface covering capability of the p... In recent years, the waterborne free intermediate coating process has been widely used in the automotive industry. Because the baking times and coating thickness are decreased, the surface covering capability of the painting process is reduced, which directly affects the appearance quality( long-and short-wave values) of the body paint. Thus, there are correspondingly higher requirements for the white body surface profile prior to painting. The surface profile of the white body is mainly affected by the plate material, the surface profile, and the deformation process. So,the change rule for the surface profile during deformation of the steel plate is a key factor in coating appearance optimization. In this paper, we first analyze the typical deformation of the outer cover of a car body. Then ,we examine the change tendency of the surface profile of steel plates with respect to different deformation rates, specifically for a steel plate comprising a hot-dip galvanized bake-hardened steel sheet. Based on our analysis of the influence of the deformation on the coating appearance,we selected 3% ,5% ,and 8% deformation rates in this research. We found the roughness (Ra) value in the typical deformation range (3% -8% ) of the car body to exhibit a decreasing trend at first and then an increasing trend. The Ra value of the 8% deformation is not more than the original plate test value. When the Pc value of the original plate is in the lower range ( about 60), it exhibits a slight increasing trend in the deformation process (3 % -8 % ). And when the Pc value of the original plate is in the higher range ( about 120 ), it exhibits no increasing trend in the deformation process ( 3% -8% ). In contrast,the waviness (WCA) value in the car body's typical deformation range (3%-8%) shows a significant growth trend. 展开更多
关键词 automotive coating hot-dip galvanized steel sheet bake hardened steel deformation ROUGHNESS WAVINESS
下载PDF
Lead and Cadmium Distribution in Tubes of Galvanized Steel by Hot-Dip Used for Drinking Water Supply
14
作者 Fernando Benedicto Mainier Felipe Silva Semaan +2 位作者 Thais Pereira Sarmento Pedro Henrique Oliveira Amorim Rodolfo Gomes Shamádos Santos 《Journal of Civil Engineering and Architecture》 2020年第5期271-279,共9页
The main objective of this work was to evaluate the presence of lead and cadmium in galvanized steel tubes by hot-dip used exclusively for drinking water supply.In this research,samples of galvanized tubes were remove... The main objective of this work was to evaluate the presence of lead and cadmium in galvanized steel tubes by hot-dip used exclusively for drinking water supply.In this research,samples of galvanized tubes were removed from walls of residential buildings with 30 years of use.In the process of hot galvanizing,the manufacturing standards allow or for low cost conveniences,and the use of primary zinc ingot with 1.6%metallic impurities,such as lead and cadmium,is allowed,enabling the incorporation of these metals into the zinc coating deposited on the carbon steel.The associated corrosion of these tubes can release these toxic metals,contaminating the drinking water used by residents.The samples taken from the tubes were evaluated by a square-wave anodic stripping voltammetry technique,and the results for lead and cadmium suggested randomly distributed levels,indicating that the contents of these contaminants depend mainly on the quality of the added primary zinc and the operational conditions of the immersion bath.The metallographic evaluations performed on the samples of the galvanized tubes showed irregularities in thickness and even a lack of the zinc layer deposited on the carbon steel surface.These facts suggest that galvanized tubes should not be used for drinking water. 展开更多
关键词 LEAD ZINC hot-dip galvanized steel square-wave anodic stripping voltammetry CONTAMINATION
下载PDF
A sandwich-like structure hybrid coating of cold galvanizing coating/polydopamine on hot-dip galvanized steel with enhanced adhesion and corrosion resistance
15
作者 LI JiWen GAO NingJie +5 位作者 ZHANG WanYu XU Long NWOKOLO Kenneth Izuchukwu WU Hao LIU FuChun HAN En-Hou 《Science China(Technological Sciences)》 SCIE EI CAS CSCD 2023年第8期2381-2395,共15页
This study aims to enhance the adhesion strength and anti-corrosion performance of the cold galvanizing coating(CGC)applied on the hot-dip galvanized steel(HDG).Polydopamine(PDA)is deposited on the HDG surface with di... This study aims to enhance the adhesion strength and anti-corrosion performance of the cold galvanizing coating(CGC)applied on the hot-dip galvanized steel(HDG).Polydopamine(PDA)is deposited on the HDG surface with different time ranges and as an interlayer between CGC and HDG through covalent immobilization.The surface morphology and the covalent interaction between PDA/HDG are exhibited by scanning electron microscope(SEM),atomic force microscopy(AFM)and X-ray photoelectron spectroscopy(XPS).The pull-off adhesion tests before and after neutral slat spry tests show an enhanced dry adhesion strength and less adhesion loss of the hybrid CGC/PDA coated HDG compared with the direct CGC coated HDG.In addition,open circuit potential(OCP)reveals that the corrosion protection performance of the hybrid CGC/PDA coated HDG increases by 200%(up to 201 d)and the corrosion density icorrattaining about 4.45×10^(-7)A/cm^(2).Electrochemical impedance spectroscopy(EIS)measurements and X-ray diffraction(XRD)analysis confirm that the precipitate of the stable chelation formed by PDA and Zn^(2+)between CGC and HDG substrate can also improve the corrosion protection performance.Such a strategy of strengthening adhesion and forming the chelate compound at the HDG surface promises a new route to corrosion protection of CGC on HDG. 展开更多
关键词 DOPAMINE zinc-rich coatings hot-dip galvanized steel corrosion protection chelate compound
原文传递
电控纠偏系统在冷轧酸洗镀锌产线的应用及常见故障处理
16
作者 王朝兵 顾文礼 《智慧工厂》 2024年第3期53-58,共6页
本文讲述电控纠偏系统在冷轧酸洗、镀锌带钢生产线得到了广泛应用,是酸洗、镀锌产线机组的重要组成部分,对产线的运行稳定,及有效解决带钢跑偏问题提供了有效的解决方案。
关键词 带钢跑偏 纠偏系统 酸洗线 酸镀线
下载PDF
特高压输电线路铁塔热镀锌表面缺陷分析与控制
17
作者 张兴明 江亮 +3 位作者 周登雄 苗立贤 张建勇 葛和岭 《新技术新工艺》 2024年第6期10-13,共4页
针对特高压线路铁塔热镀锌中常见的镀锌层表面缺陷,对产生的原因进行了分析研究,根据数年来的实际经验,参考国内外相关热镀锌文献介绍,针对性制定了优化工艺和防止表面缺陷发生的措施,经过反复的实际验证,制定的优化工艺参数和措施对于... 针对特高压线路铁塔热镀锌中常见的镀锌层表面缺陷,对产生的原因进行了分析研究,根据数年来的实际经验,参考国内外相关热镀锌文献介绍,针对性制定了优化工艺和防止表面缺陷发生的措施,经过反复的实际验证,制定的优化工艺参数和措施对于克服热镀锌中的表面缺陷具有一定的参考价值,对进一步提高表面质量具有指导意义。 展开更多
关键词 特高压线路铁塔 热镀锌 缺陷分析 工艺控制
下载PDF
Development of Hot Dip Galvanized Steel Strip and Its Application in Automobile Industry 被引量:4
18
作者 BIAN Jun ZHU Yun +1 位作者 LIU Xiang-hua WANG Guo-dong 《Journal of Iron and Steel Research International》 SCIE EI CAS CSCD 2006年第3期47-50,共4页
Hot dip galvanized product is widely used in architecture, household electric appliance, ship vehicle, vessel, mechano-electronic device and other fields including clothing, food, housing, and travel. The history, dev... Hot dip galvanized product is widely used in architecture, household electric appliance, ship vehicle, vessel, mechano-electronic device and other fields including clothing, food, housing, and travel. The history, development, market need, and technological advancement of hot dip galvanized strip, production situation, and development tendency in China are briefly introduced. The fact that it is necessary to build new and auto galvanized strip line with the development of the iron and steel industry in China. 展开更多
关键词 hot dip galvanizing DEVELOPMENT technological advancement new galvanizing line
下载PDF
Features and control methods of the galvanneal furnace 被引量:1
19
作者 WANG Lu TANG Xuexin 《Baosteel Technical Research》 CAS 2014年第1期47-51,共5页
The recent rapid developments in the automobile industry have demanded the extensive use of gaivannealed (GA) steel sheets.In particular,the development of lightweight automobiles is putting increasingly higher requ... The recent rapid developments in the automobile industry have demanded the extensive use of gaivannealed (GA) steel sheets.In particular,the development of lightweight automobiles is putting increasingly higher requirements on the strength of GA steel sheets.The galvanneal furnace,which is used for processing galvannealed steel sheets,is typically composed of the induction heating section,holding section and fog cooling section.This paper described the structural characteristics of each component of the galvanneal furnace,and analyzed temperature control methods of the galvanneal furnace that are important for the successful production of high-strength GA steel sheets for automotive applications. 展开更多
关键词 hot-dip galvanized galvanneal furnace induction heating fog cooling
下载PDF
Bottom dross defect and its transformation behavior during the galvannealing process 被引量:1
20
作者 JIN Xinyan LIN Chuanhua +1 位作者 QIAN Hongwei ZHANG Jun 《Baosteel Technical Research》 CAS 2020年第3期1-11,共11页
Bottom dross obtained from zinc bath and the typical bottom dross defects on galvanized and galvannealed coating were metallographically investigated.Galvannealing simulations with different holding time were conducte... Bottom dross obtained from zinc bath and the typical bottom dross defects on galvanized and galvannealed coating were metallographically investigated.Galvannealing simulations with different holding time were conducted,and the bottom dross transformation behavior during the galvannealing process was revealed.The fast diffusion between bottom dross particles and the surrounding zinc occurs during the galvannealing process,resulting in the formation of an Al-containing Zn-Fe intermetallic outburst structure at the defect position.The thicker and harder coating will cause a shiny spot on the coating surface and a deep dent on the substrate after being temper rolled. 展开更多
关键词 hot-dip galvanizing bottom dross galvanNEALING
下载PDF
上一页 1 2 11 下一页 到第
使用帮助 返回顶部