Polydimethylsiloxane(PDMS),tetraethoxysilane(TEOS),ethyl alcohol(EtOH) and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method.The effect of the contents of H2O ...Polydimethylsiloxane(PDMS),tetraethoxysilane(TEOS),ethyl alcohol(EtOH) and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method.The effect of the contents of H2O and PDMS on thin films was studied.When the volume ratio of H2O to TEOS is 0.5,the optimum quality of thin films is obtained.And the gelation time is affected slightly by H2O content.Uniform thin films are obtained when the volume ratio of PDMS to TEOS is 0.2.Yet,the sol would be inactive in 6 d.Various properties of thin films were studied,including hardness,adhesive quality,hydrophobic property,corrosion protection property,and abrasion resistance.Test results show that the pencil hardness is generally 3-6 H,and adhesive quality achieves the highest standard of 0.When the sintering temperature is below 400 oC,the contact angle is about 95° and hydrophobic films are obtained.The abrasion resistance of thin films is better than that of aluminum alloy when the sintering temperature is higher than 300 oC.And the excellent corrosion protective effect is obtained by single-layer coating when the sintering temperature is higher than 400 oC.展开更多
基金supported partly by the School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong university,China
文摘Polydimethylsiloxane(PDMS),tetraethoxysilane(TEOS),ethyl alcohol(EtOH) and deionized water were main raw materials to prepare silicone-modified hybrid thin films using sol-gel method.The effect of the contents of H2O and PDMS on thin films was studied.When the volume ratio of H2O to TEOS is 0.5,the optimum quality of thin films is obtained.And the gelation time is affected slightly by H2O content.Uniform thin films are obtained when the volume ratio of PDMS to TEOS is 0.2.Yet,the sol would be inactive in 6 d.Various properties of thin films were studied,including hardness,adhesive quality,hydrophobic property,corrosion protection property,and abrasion resistance.Test results show that the pencil hardness is generally 3-6 H,and adhesive quality achieves the highest standard of 0.When the sintering temperature is below 400 oC,the contact angle is about 95° and hydrophobic films are obtained.The abrasion resistance of thin films is better than that of aluminum alloy when the sintering temperature is higher than 300 oC.And the excellent corrosion protective effect is obtained by single-layer coating when the sintering temperature is higher than 400 oC.