HyperCoal was prepared from low-rank coal via high-temperature solvent extraction with N-methylpyrrolidone as an extraction solvent and a liquid-to-solid ratio of 50 mL/g in a high-temperature and high-pressure reacto...HyperCoal was prepared from low-rank coal via high-temperature solvent extraction with N-methylpyrrolidone as an extraction solvent and a liquid-to-solid ratio of 50 mL/g in a high-temperature and high-pressure reactor. When HyperCoal was used as a binder and pulverized coal was used as the raw material, the compressive strength of the hot-pressed briquettes(each with a diameter of 20 mm and mass of 5 g) under different conditions was studied using a hot-pressing mold and a high-temperature furnace. The compressive strength of the hot-pressed briquettes was substantially improved and reached 436 N when the holding time period was 15 min, the hot-pressing temperature was 673 K, and the HyperCoal content, was 15 wt%. Changes in the carbonaceous structure, as reflected by the intensity ratio between the Raman G-and D-bands(IG/ID), strongly affected the compressive strength of hot-pressed briquettes prepared at different hot-pressing temperatures. Compared with cold-pressed briquettes, hot-pressed briquettes have many advantages, including high compressive strength, low ash content, high moisture resistance, and good thermal stability; thus, we expect that hot-pressed briquettes will have broad application prospects.展开更多
A new pressing method was proposed for hot-pressing process. Experimental results indicated that the porosity in Al2O3/TiC/ Ni/Mo (hereafter called AI2O3/TiC composite) composite compacts decreases by 6% after adoptin...A new pressing method was proposed for hot-pressing process. Experimental results indicated that the porosity in Al2O3/TiC/ Ni/Mo (hereafter called AI2O3/TiC composite) composite compacts decreases by 6% after adopting this new technique, compared to traditional hot-pressing technique under the same sintering temperature. The flexural strength and Vicker hardness increase from 883 MPa to 980 MPa and from 16 GPa to 21.1 GPa, respectively. A theoretical model was given to analyze the densification mechanism of the composite in the process of repetitious-hot-pressing.展开更多
本文介绍了一种基于2 bit阶梯波时间调制(step-wave time-modulation,SWTM)的高精度幅度调控方法。首先建立了2 bit SWTM理论模型,分析了阶梯波形对射频信号时间调制的幅度调控精度影响;然后设计了2 bit SWTM电路,进行了高精度幅度调控...本文介绍了一种基于2 bit阶梯波时间调制(step-wave time-modulation,SWTM)的高精度幅度调控方法。首先建立了2 bit SWTM理论模型,分析了阶梯波形对射频信号时间调制的幅度调控精度影响;然后设计了2 bit SWTM电路,进行了高精度幅度调控实验。测试结果表明,在40 MHz信号带宽下,该2 bit SWTM电路实现了0~31.75 dB衰减动态范围的7 bit幅度调控,误差范围小于±(0.1+0.8%AS)dB,均方根误差为0.07 dB。展开更多
The Nd-Fe-B magnets are pre-sintered and then processed with hot-pressing,and the resulting magnets are called the hot-pressed pretreated(HPP)magnets.The coercivity of the HPP magnets increases as the annealed tempera...The Nd-Fe-B magnets are pre-sintered and then processed with hot-pressing,and the resulting magnets are called the hot-pressed pretreated(HPP)magnets.The coercivity of the HPP magnets increases as the annealed temperature increases.When the annealing temperature is 900℃,the coercivity of the magnet is only 17.6 kOe(1 Oe=79.5775 A·m^-1),but when the annealing temperature rises up to 1060℃,the coercivity of the magnet reaches 23.53 kOe,which is remarkably increased by 33.7%.The microstructure analysis indicates that the grain surface of the HPP magnet becomes smoother as the annealed temperature increases.The microstructure factorαis changed according to the intrinsic coercivity model formula.Theαof the magnet at 900℃is only 0.578,but it is 0.825 at 1060℃.Microstructural optimization is due mainly to the increase of coercivity of the HPP magnet.展开更多
Densification behavior of nanocrystalline Mg2Si （n-Mg2Si） with grain size about 30-50 nm was investigated by hot-pressing at 400℃. The results indicated that the densification process of n-Mg2Si exhibited three lin...Densification behavior of nanocrystalline Mg2Si （n-Mg2Si） with grain size about 30-50 nm was investigated by hot-pressing at 400℃. The results indicated that the densification process of n-Mg2Si exhibited three linear segments： p〈0.3 GPa, 0.3 GPa〈p〈1.2 GPa, and p〉1.2 GPa determined by Heckel formula, among which the third fast increasing segment in high pressure range p〉1.2 GPa has seldom been reported in conventional coarse-grained polycrystalline materials. Nevertheless, in the whole pressure range （0.125-1.500 GPa） investigated the densification behavior of n-Mg2Si can be well described by a Kawakita formula p/C=（1/a）p＋ 1/（ab） with constant α=0.452 being in good agreement with the initial porosity of the compact.展开更多
针对机载设备的BIT系统,提出了一种改进的LMS(Least Mean Squares)算法,该算法主要应用于故障检测和定位方面。通过引入自适应学习率控制、加速收敛和稳定性优化技术手段,该算法能够显著提升BIT系统中的信号处理性能,加快故障检测和定...针对机载设备的BIT系统,提出了一种改进的LMS(Least Mean Squares)算法,该算法主要应用于故障检测和定位方面。通过引入自适应学习率控制、加速收敛和稳定性优化技术手段,该算法能够显著提升BIT系统中的信号处理性能,加快故障检测和定位速度,并提高系统的准确性和稳定性。在故障检测方面,改进的LMS算法可以有效地识别故障信号并进行分类和定位。通过对输入信号进行预处理和模型参数的优化,改进LMS算法能够更准确地捕捉异常信号特征,从而实现对故障的快速检测和定位,提高BIT系统的可靠性和故障诊断能力。同时,改进的LMS算法还应用于BIT系统中的自适应滤波模块,用于消除噪声和滤除干扰信号。通过采用自适应学习率控制和加速收敛技术,改进算法能够智能地调整滤波参数,有效抑制噪声和干扰信号,提高BIT系统对故障信号的识别和定位能力。通过实验验证,改进的LMS算法在机载设备的BIT系统中表现出较好的应用潜力。该算法相比传统LMS算法,在故障检测和定位准确性、故障诊断速度以及系统稳定性方面均取得了显著的改善。展开更多
Orbital-angular-momentum(OAM)multiplexing technology offers a significant dimension to enlarge communication capacity in free-space optical links.The coherent beam combining(CBC)system can simultaneously realize OAM m...Orbital-angular-momentum(OAM)multiplexing technology offers a significant dimension to enlarge communication capacity in free-space optical links.The coherent beam combining(CBC)system can simultaneously realize OAM multiplexing and achieve high-power laser output,providing substantial advantages for long-distance communication.Herein,we present an integrated CBC system for freespace optical links based on OAM multiplexing and demultiplexing technologies for the first time,to the best of our knowledge.A method to achieve flexible OAM multiplexing and efficient demultiplexing based on the CBC system is proposed and demonstrated both theoretically and experimentally.The experimental results exhibit a low bit error rate of 0.47%and a high recognition precision of 98.58%throughout the entire data transmission process.By employing such an ingenious strategy,this work holds promising prospects for enriching ultra-long-distance structured light communication in the future.展开更多
逐次逼近寄存器模数转换器(SAR ADC)在逐次逼近的过程中,电容的切换会使参考电压上出现参考纹波噪声,该噪声会影响比较器的判定,进而输出错误的比较结果。针对该问题,基于CMOS 0.5μm工艺,设计了一种具有纹波消除技术的10 bit SAR ADC...逐次逼近寄存器模数转换器(SAR ADC)在逐次逼近的过程中,电容的切换会使参考电压上出现参考纹波噪声,该噪声会影响比较器的判定,进而输出错误的比较结果。针对该问题,基于CMOS 0.5μm工艺,设计了一种具有纹波消除技术的10 bit SAR ADC。通过增加纹波至比较器输入端的额外路径,将参考纹波满摆幅输入至比较器中;同时设计了消除数模转换器(DAC)模块,对参考纹波进行采样和输入,通过反转纹波噪声的极性,消除参考纹波对ADC输出的影响。该设计将信噪比(SNR)提高到56.75 dB,将有效位数(ENOB)提升到9.14 bit,将积分非线性(INL)从-1~5 LSB降低到-0.2~0.3 LSB,将微分非线性(DNL)从-3~4 LSB降低到-0.5~0.5 LSB。展开更多
基金financially supported by the NationalNatural Science Foundation of China (No. 51574023)the National Key Research and Development Program ofChina (No. 2016YFB0600701)
文摘HyperCoal was prepared from low-rank coal via high-temperature solvent extraction with N-methylpyrrolidone as an extraction solvent and a liquid-to-solid ratio of 50 mL/g in a high-temperature and high-pressure reactor. When HyperCoal was used as a binder and pulverized coal was used as the raw material, the compressive strength of the hot-pressed briquettes(each with a diameter of 20 mm and mass of 5 g) under different conditions was studied using a hot-pressing mold and a high-temperature furnace. The compressive strength of the hot-pressed briquettes was substantially improved and reached 436 N when the holding time period was 15 min, the hot-pressing temperature was 673 K, and the HyperCoal content, was 15 wt%. Changes in the carbonaceous structure, as reflected by the intensity ratio between the Raman G-and D-bands(IG/ID), strongly affected the compressive strength of hot-pressed briquettes prepared at different hot-pressing temperatures. Compared with cold-pressed briquettes, hot-pressed briquettes have many advantages, including high compressive strength, low ash content, high moisture resistance, and good thermal stability; thus, we expect that hot-pressed briquettes will have broad application prospects.
基金supported by the National Natural Science Foundation of China(No.50105011)
文摘A new pressing method was proposed for hot-pressing process. Experimental results indicated that the porosity in Al2O3/TiC/ Ni/Mo (hereafter called AI2O3/TiC composite) composite compacts decreases by 6% after adopting this new technique, compared to traditional hot-pressing technique under the same sintering temperature. The flexural strength and Vicker hardness increase from 883 MPa to 980 MPa and from 16 GPa to 21.1 GPa, respectively. A theoretical model was given to analyze the densification mechanism of the composite in the process of repetitious-hot-pressing.
文摘本文介绍了一种基于2 bit阶梯波时间调制(step-wave time-modulation,SWTM)的高精度幅度调控方法。首先建立了2 bit SWTM理论模型,分析了阶梯波形对射频信号时间调制的幅度调控精度影响;然后设计了2 bit SWTM电路,进行了高精度幅度调控实验。测试结果表明,在40 MHz信号带宽下,该2 bit SWTM电路实现了0~31.75 dB衰减动态范围的7 bit幅度调控,误差范围小于±(0.1+0.8%AS)dB,均方根误差为0.07 dB。
基金Project supported by the Major Project of“Science and Technology Innovation 2025”in Ningbo City,China(Grant Nos.2018B10086 and 2018B10017).
文摘The Nd-Fe-B magnets are pre-sintered and then processed with hot-pressing,and the resulting magnets are called the hot-pressed pretreated(HPP)magnets.The coercivity of the HPP magnets increases as the annealed temperature increases.When the annealing temperature is 900℃,the coercivity of the magnet is only 17.6 kOe(1 Oe=79.5775 A·m^-1),but when the annealing temperature rises up to 1060℃,the coercivity of the magnet reaches 23.53 kOe,which is remarkably increased by 33.7%.The microstructure analysis indicates that the grain surface of the HPP magnet becomes smoother as the annealed temperature increases.The microstructure factorαis changed according to the intrinsic coercivity model formula.Theαof the magnet at 900℃is only 0.578,but it is 0.825 at 1060℃.Microstructural optimization is due mainly to the increase of coercivity of the HPP magnet.
基金the National Natural Science Foundation of China under grant No. 50371081.
文摘Densification behavior of nanocrystalline Mg2Si （n-Mg2Si） with grain size about 30-50 nm was investigated by hot-pressing at 400℃. The results indicated that the densification process of n-Mg2Si exhibited three linear segments： p〈0.3 GPa, 0.3 GPa〈p〈1.2 GPa, and p〉1.2 GPa determined by Heckel formula, among which the third fast increasing segment in high pressure range p〉1.2 GPa has seldom been reported in conventional coarse-grained polycrystalline materials. Nevertheless, in the whole pressure range （0.125-1.500 GPa） investigated the densification behavior of n-Mg2Si can be well described by a Kawakita formula p/C=（1/a）p＋ 1/（ab） with constant α=0.452 being in good agreement with the initial porosity of the compact.
文摘针对机载设备的BIT系统,提出了一种改进的LMS(Least Mean Squares)算法,该算法主要应用于故障检测和定位方面。通过引入自适应学习率控制、加速收敛和稳定性优化技术手段,该算法能够显著提升BIT系统中的信号处理性能,加快故障检测和定位速度,并提高系统的准确性和稳定性。在故障检测方面,改进的LMS算法可以有效地识别故障信号并进行分类和定位。通过对输入信号进行预处理和模型参数的优化,改进LMS算法能够更准确地捕捉异常信号特征,从而实现对故障的快速检测和定位,提高BIT系统的可靠性和故障诊断能力。同时,改进的LMS算法还应用于BIT系统中的自适应滤波模块,用于消除噪声和滤除干扰信号。通过采用自适应学习率控制和加速收敛技术,改进算法能够智能地调整滤波参数,有效抑制噪声和干扰信号,提高BIT系统对故障信号的识别和定位能力。通过实验验证,改进的LMS算法在机载设备的BIT系统中表现出较好的应用潜力。该算法相比传统LMS算法,在故障检测和定位准确性、故障诊断速度以及系统稳定性方面均取得了显著的改善。
基金supported by the National Natural Science Foundation of China(Grant No.62305388)the Postgraduate Scientific Research Innovation Project of Hunan Province(Grant No.QL20230007).
文摘Orbital-angular-momentum(OAM)multiplexing technology offers a significant dimension to enlarge communication capacity in free-space optical links.The coherent beam combining(CBC)system can simultaneously realize OAM multiplexing and achieve high-power laser output,providing substantial advantages for long-distance communication.Herein,we present an integrated CBC system for freespace optical links based on OAM multiplexing and demultiplexing technologies for the first time,to the best of our knowledge.A method to achieve flexible OAM multiplexing and efficient demultiplexing based on the CBC system is proposed and demonstrated both theoretically and experimentally.The experimental results exhibit a low bit error rate of 0.47%and a high recognition precision of 98.58%throughout the entire data transmission process.By employing such an ingenious strategy,this work holds promising prospects for enriching ultra-long-distance structured light communication in the future.
