Horizontal continuous casting process under electromagnetic field for preparing AA3003/AA4045 clad composite hollow billets

A modified horizontal continuous casting process under the electromagnetic field was proposed for preparing AA3003/ AA4045 clad composite hollow billets. To investigate the effect of electromagnetic field on this process, a comprehensive three-dimensional model was developed. Two cases with and without electromagnetic field were compared using the simulations. When rotating electromagnetic stirring is applied, the flow pattern of fluid melt is greatly modified; the mushy zone becomes much wider, the temperature profile becomes more uniform, and the solid fraction decreases for both the external and internal alloy melt layers. These modifications are beneficial for the formation of a bimetal interface and fine and uniform grain structure of the clad composite hollow billet. Experiments conducted using the same electrical and casting parameters as the simulations verify that under the electromagnetic field the microstructure of the clad composite hollow billet becomes fine and the diffusion of the elements at the interface is promoted.

Effect of Electromagnetic Frequency on Microstructures of Continuous Casting Aluminum Alloys

The relationship between electromagnetic frequency and microstructures of continuous casting aluminum alloys was studied. 7075 aluminum alloy ingot of 100 mm in diameter was produced by electromagnetic continuous casting process, the microstructures of as-cast ingot was examined by scanning electron microscopy (SEM) equipped with energy dispersive spectrometer (EDS). The results showed that electromagnetic frequency greatly influenced segregation and microstructures of as-cast ingot, and product quality can be guaranteed by the application of a proper frequency. Electromagnetic frequency plays a significant role in solute redistribution; low frequency is more efficient for promoting solution of alloying elements.

Effect of low-frequency electromagnetic field on the as-cast microstructure of a new super high strength aluminum alloy by horizontal continuous casting

The super high strength aluminum alloy ingots with 100 mm in diameter were cast by the process of low-frequency electromagnetic horizontal continuous casting (LFEHC) and the effect of electromagnetic field on the as-cast microstructure was studied. Results show that microstructure of the sample prepared by the LFEHC process was greatly refined. Microstructures at the border and the center of the ingots were fine, uniform and rosette-shaped. Electromagnetic frequency plays a key role in microstructure refining. Fine and uniform microstructures can be obtained with optimal electromagnetic frequency. In this experiment, under a frequency of 30 Hz the microstructure was the finest and the most uniform.

Analysis of cracking phenomena in continuous casting of 1Cr13 stainless steel billets with final electromagnetic stirring

Solidification cracking that occurs during continuous casting of 1Cr13 stainless steel was investigated with and without final elec- tromagnetic stirring （F-EMS）. The results show that cracks initiates and propagates along the grain boundaries where the elements of carbon and sulfur are enriched. The final stirrer should be appropriately placed at a location that is 7.5 m away from the meniscus, and the appropri- ate thickness of the liquid core in the stirring zone is 50 ram. As a stirring current of 250 A is imposed, it can promote colurnnar-equiaxed transition, decrease the secondary dendrite arm spacing, and reduce the segregation of both carbon and sulfur. F-EMS can effectively de- crease the amount of cracks in 1Cr13 stainless steel.

Numerical Simulation of Heat Transfer and Deformation of Initial Shell in Soft Contact Continuous Casting Mold Under High Frequency Electromagnetic Field

Heat transfer and deformation of initial solidification shell in soft contact continuous casting mold under high frequency electromagnetic field were analyzed using numerical simulation method; the relative electromagnetic parameters were obtained from the previous studies. Owing to the induction heating of a high frequency electromagnetic field （20 kHz）, the thickness of initial solidification shell decreases, and the temperature of strand surface and slit copper mold increases when compared with the case without the electromagnetic filed. The viscosity of flux de- creases because of the induction heating of the high frequency electromagnetic field, and the dimension of the flux channel increases with electromagnetic pressure; thus, the deformation behavior of initial solidification shell was different before and after the action of high frequency electromagnetic field. Furthermore, the abatement mechanism of oscillation marks under high frequency electromagnetic field was explained.

Electromagnetic continuous casting by imposing multi-electromagnetic field

In order to obtain cast metal of high quality, an investigation was carried out by simultaneous imposition of multi electromagnetic fields from the outside of a cold crucible copper mold. Sn 4.5%Pb as a simulator of high melting point metal was continuously cast under different conditions. The results show that multi electromagnetic fields can eliminate surface defects, and coarse columnar grains of the solidification structure is turned into equiaxed crystal with the increase of magnetic flux density. Moreover, finer equiaxed crystal structure is obtained when rapidly solidified sheet is fed into the mold during continuous casting.[

THE COMPUTATION AND EXPERIMENT ANALYSIS OF ELECTROMAGNETIC CONTINUOUS CASTING WITH SOFT-CONTACTED MOULD

In this paper, coupling the quasi-3D numerical simulation of electromagnetic field and the experiments of continuous casting with soft-contacted mould with some metals such as tin, aluminum, copper and steel, the electromagnetic characteristics of continuous casting with soft-contacted mould is analyzed. It is shown that the electromagnetic pressure on the surface of billet is increasing with the rising of power frequency as a logarithmically parabolic function, with that of electric conductivity of billet as a power junction, and with that of the current in inductor as a parabolic junction.

NUMERICAL SIMULATION OF ALTERNATIVE HORIZONTAL LEVITATION ELECTROMAGNETIC CONTINUOUS CASTING（Ⅱ）

ＮＵＭＥＲＩＣＡＬＳＩＭＵＬＡＴＩＯＮＯＦＡＬＴＥＲＮＡＴＩＶＥＨＯＲＩＺＯＮＴＡＬＬＥＶＩＴＡＴＩＯＮＥＬＥＣＴＲＯＭＡＧＮＥＴＩＣＣＯＮＴＩＮＵＯＵＳＣＡＳＴＩＮＧ（Ⅱ）￥ＺｈｕＳｈｏｕｊｕｎ；ＲｅｎＺｈｏｎｇｍｉｎｇ；ＤｅｎｇＫａｎｇ；Ｊｉａｎ...

Effect of low-frequency rotary electromagnetic-field on solidification structure of continuous casting austenitic stainless steel

To understand the solidification behavior of austenitic stainless steel in rotary electromagnetic-field, the influence of low-frequency rotary electromagnetic-field on solidification structure of austenitic stainless steel in horizontal continuous casting was investigated based on industrial experiments. The results show that the solidification structure of austenitic stainless steel can be remarkably refined, the central porosity and shrinkage cavity can be remarkably decreased, and the equiaxed grains zone are enlarged by means of application of appropriate low-frequency electromagnetic-field parameters. The industrial trials verify that the stirring intensity of austenitic stainless steel should be higher compared with that of plain carbon steel. Electromagnetic stirring affects the macrostructure even if the average magnetic flux density of the electromagnetic stirring reaches 90 mT (amplitude reaches 141 mT) with the frequency of 3-4 Hz. Due to a higher viscosity, rotating speed of molten stainless steel is 20%-30% lower than that of molten carbon steel in the same magnetic flux density.

A high-Nb TiAl alloy with highly refined microstructure and excellent mechanical properties fabricated by electromagnetic continuous casting

In the present research, microstructure refinement of a high-Nb TiAl alloy （Ti-48Al-8Nb-0.15B） was realized by means of the electromagnetic continuous casting （EMCC） technique. The microstructure of an ingot obtained by EMCC was analyzed using scanning electron microscopy （SEM）. As compared with the raw as-cast alloy, the obtained EMCC alloy presented a much finer microstructure with lamellar colonies with a mean size of about 50-70 μm because the electromagnetic stirring broke initial dendrites and enhanced the heterogeneous nucleation. As the grains were refined, the properties of the TiAl alloy were improved significantly. This implies that the EMCC technique could offer the possibility of application for high-Nb TiAl alloys with a refined microstructure and excellent properties to be used as a structural material.

LATERAL STABILITY OF ALTERNATIVE HORIZONTAL LEVITATION ELECTROMAGNETIC CONTINUOUS CASTING OF ALUMINIUM SHEET

１ＩＮＴＲＯＤＵＣＴＩＯＮＡｌｔｅｒｎａｔｉｖｅｅｌｅｃｔｒｏｍａｇｎｅｔｉｃｃｏｎｔｉｎｕｏｕｓｃａｓｔｉｎｇｉｓａｈｉｇｈｌｉｇｈｔｅｄｎｅｗｔｅｃｈｎｉｑｕｅ．Ｉｎｔｈｉｓｔｅｃｈｎｉｑｕｅｔｈｅｅｌｅｃｔｒｏｍａｇｎｅｔｉｃｆｏｒｃｅｐｒ...

Effect of electromagnetic field on macrosegregation of continuous casting 7075 alloy

The effect of electromagnetic field on macrosegregation of continuous casting aluminum alloy was studied. 7075 aluminum alloy ingot with diameter of 200 mm was produced by electromagnetic casting. Magnitude of coil current was varied from 100 A to 600 A, and frequency from 10 Hz to 100 Hz. Variation of element content along the radius of ingot was examined by means of chemical analysis. The results show that electromagnetic casting process can effectively reduce the macrosegregation, and electromagnetic frequency has a great influence on element distribution along the radius of ingot. When frequency is 30 Hz, macrosegregation is eliminated completely.

Molten steel level stability in continuous casting slab mold under electromagnetic stirring

Fluctuation of molten steel level in continuous casting process is a critical issue. The analytic function for the liquid steel surface stability index( F) of the continuous casting slab mold under the action of electromagnetic stirring was derived. The effects on the F value of the electromagnetic field,casting mold,submerged entry nozzle,and casting speed were observed,and the stability of the process parameters of a practical continuous casting system was evaluated. The main results generated are as follows:①Based on the free flow jet theory,a formula is established for the level stability index of continuous casting slab mold under electromagnetic stirring.②According to the results of calculation,the various parameters in decreasing order of the magnitude of their influence are magnetic flux density,nozzle submersion depth,casting speed,slab width,stirring current frequency,and nozzle side-hole inclination angle.③For practical continuous casting with a slab thickness of 230 mm,the calculated F values are between 3 and 5 for different matches between slab width and casting speed,but the parameter optimization space is much larger for wider slab widths and lower casting speeds.

REVISED k-ε TURBULENCE MODEL IN ELECTROMAGNETIC CONTINUOUS CASTING OF MELT

The research is motivated by the ongoing the electromagnetic continuous casting of molten metal. The revised k-ε model considering the effect of magnetic field application was derived. The specific model equations for the electromagnetic braking were used to calculate the velocity distribution in the continuous casting mold of steel. The results show that the revised k-ε model considering the effect of magnetic field application tends to suppress the production of turbulence and difference between the conventional and revised k-e model is small.

Numerical simulation of transport phenomena in continuous casting of steel plates with electromagnetic brake

The present work numerically investigates two-dimensional （2-D） solidification transport phenomena （EM-STP） during continuous casting （CC） process in the absence and the presence of static magnetic fields （SMFs）, based on a unified numerical model. For the purpose of controlling vortexes, the electromagnetic brake （EMBR） effects of various SMFs under the given depth of submerged entry nozzle （SEN） and the same casting velocity V0 are investigated. ANSYS software is used to analyze the SMFs that applied to the EMCC process, and then a data-conversion program based on the principle of linear interpolation proposed previously is used to deal with the issue of data-format-matching between FEM and FVM. The simulation results indicate that, an appropriate SMF can effectively suppress the bulk liquid flow in CC-process of steel plate, and with in- crease of the intensity of applied magnetic fields, the vortexes become weaker and the oscillating amplitude of impinging jet decreases. Based on the knowledge gained from the EMCC-STP analysis and by comparing the re- sults with the applied magnetic fields with those without magnetic fields, it is found that a SMF with 丨 Bmax 丨 = 5.5 × 10 -3 T can meet the need of braking, and consequently improve the quality of casting by reducing the penetration of non-metallic inclusions, as well as avoiding breakout, macro-segregation and crack ultimately.

Technical parameters in electromagnetic continuous casting of aluminum alloy

The temperature field of aluminum ingot during electromagnetic continuous casting was calculated by the numerical method, and the effects of cooling water strength, position of the cooling water holes and pouring temperature as well as induction heat on casting speed, were studied. The results show that among the technical parameters the distance from the position of the cooling water holes to the bottom of the mold is the most important factor, whose change from 20 mm to 15 mm and from 15 mm to 10 mm causes the setting rate increasing respectively by 0.14 mm/s and 0.3 mm/s.The calculated results also agree with the experiment well. The simulation program can be used to determine technical parameters of electromagnetic casting of aluminum ingot effectively.

Research on horizontal electromagnetic continuous casting of copper tube blanks

The effect of commercial frequency electromagnetic field on the solidification structure and mechanical propertiesof copper hollow blanks prepared by horizontal continuous casting method was investigated. The results show thatwhen the electromagnetic field is imposed, columnar grains are evidently refined and fine equiaxed grains areobtained in the inner side of the cross-section. Moreover, with the increase of input current, the equiaxed grain regionwidens and the grains distribute more uniformly in the circumferential direction. Meanwhile, the mechanical properties areremarkably improved by the application of electromagnetic field. When the input current is 140 A, the tensile strengthincreases 15% and the elongation increases 10%. However, the electromagnetic field has no effect on the distribution ofmicroelements.

Numerical Prediction on the Flow Field of Molten Steel and the Trajectory of Inclusion in Continuous Casting Mold Effected by Electromagnetic Field

Through coupling electromagnetic field equations with turbulent flow equations,the numerical prediction has been conducted on the flow field of molten steel and the trajectory of inclusion particle in the continuous casting mold effected by electromagnetic field.The difference between the maximum and the minimum of the shear stress on mold wall is used to scale the impingement strength of molten steel discharged from immersed nozzle to the solidifying shell on the narrow wall of mold.The flow field of molten steel in the mold is changed greatly and the impingement strength of the jet is reduced while electromagnetic field is applied.It is found that the successful control of flow field depends on the current and location of coil.At the same time,the new floating paths of inclusion particles are formed and the upward particles that are far away from the solidifying zone on the narrow wall of mold change their moving directions with the change of flow field,so that the particles can avoid being entrapped by the solidifying shell.

Numerical simulation of fluid flows in a slab continuous casting mold under electromagnetic stirring

This study established a three-dimensional mathematical model to determine the fluid flow in a slab continuous casting mold under an electromagnetic stirring force. The flow structure and distribution were studied with respect to different continuous casting parameters and stirring current. Based on the calculation results, the mold flux entrapment index in free surface and velocity uniformity index were used to evaluate the flow field in the mold. The theoretical basis for the optimization of the flow field structure was provided. The study also suggested an optimization method for electromagnetic stirring parameters.

Physical modeling and numerical simulation of electromagnetic stirring in a slab continuous casting mold

Through physical modeling and numerical simulation,the flow field in a slab continuous casting mold with electromagnetic stirring is measured under different casting parameters and stirring currents. To qualitatively evaluate the flow field in the mold, two indexes,i, e., mold flux entrapment and velocity uniformity, are proposed. Based on these two indexes, some optimized stirring parameters under different casting conditions can be determined.