Cluster Warhead Dispersing Technique and Its Interior Ballistic Calculation

Cluster warhead dispersing technique is analyzed with gas dynamic theory. It is seen that the front cover opening and two stage dispersing system is suitable for guided sub missiles whose number is not so large. The interior ballistic performances of this system are calculated with numerical calculation method. The performances such as the pressure in the pressure chambers and the velocity of the sub missiles are obtained in curve form.

SEQUENTIAL DISPERSING DISTRIBUTION EFFECT OF AERIAL CLUSTER BOMB

The sequential dispersing results of aerial cluster bomb are discussed. The ballistic model and the mod- el for impact point distribution of bullets are established. The main factors influencing impact point distribution are analyzed by numerical simulation. And the feasibility of improving distribution effect through sequential dis- persing is validated. Sequential dispersion and optimized airdrop parameters can help to achieve better battle effec- tiveness.

The Influence of Grain Size on Decomposition Reaction of Limestone in Dispersing State

The thermal behavior and kinetic parameters of decomposition reaction of limestone in a temperature-programmed mode were investigated by means of TG. The experimental results show that the kinetic model functions in different forms for the thermal decomposition reactions of different limestone grain sizes in dispersing state under the atmosphere of static air are 4(1-α) 3/4 for small size limestone and (1-α) for large size limestone. Information was obtained on the relationship among the decomposition temperature, decomposition time, decomposition fraction, decomposition reaction rate constant and grain size of limestone.

The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading

A systematic investigation on the mechanism of dynamic liquid dispersing process via theoretical and experimental approach is presented.The experiments include weak and strong constrained scenarios using the high-speed camera technique and the flash X-ray radiography technique.Based on dynamic analysis,one-dimensional characteristics analysis and some numerical simulations on the propagating processes of blast waves before the container shell rupturing,further and detailed analyses of the experimental results are presented.The effects of the liquid viscosity on the dynamic dispersing flow are also analyzed,and the spall fracture mechanism is explored.Thus,the dominating forces determining the dispersing liquid flow are revealed,that is,the stretching and shearing action due to the interaction of two reflecting rarefaction waves in opposite propagating directions.The influence of container shell strength on the dispersing liquid flow is also investigated,and the characters of cavitation layered in liquid before shell rupturing are uncovered.Results revealed that different shell material results in different cavitating layers.Then the different cavitating layers drive the different dynamic liquid dispersing process coming into being.The metastable liquid states caused by pressure drop and cavitation generation are discussed.

Viscosity model of high-viscosity dispersing system

High-viscosity dispersing system is formed by dispersing the solid particles in the high-viscosity continuous medium.It is very easy to form the three-dimensional network structure for solid particles in the system and the rheology behavior becomes complicated.The apparent viscosity of this dispersing system always has the connection with the volume ratio and the shear rate.In order to discuss the rheology behavior and put up the viscosity model,the suspension of silicon dioxide and silicon oil were prepared.Through testing the viscosity,the solid concentration and the shear rate,the effects of the ratio and the shear rate on viscosity was analyzed,the model of the high-viscosity dispersing system was designed and the model with the printing ink were validated.The experiment results show that the model is applicable to the high-viscosity dispersing systems.

Dispersing and Doping of BaTiO_3 Powder by Adsorption

Dispersing and doping of BaTiO3 powder by adsorption method were investigated. Ultrafine BaTiO3 powders were dispersed in the aqueous with ammoniumized citrate （NHa-CA） or ammoniumized citric lanthanum chelate （NH4-La-CA） as dispersant by ultrasonic bath. Better dispersion of BaTiO3 slurry was obtained in the aqueous with NH4-La-CA than that of NH4-CA when the mass ratio of citric acid （CA） to BaTiO3 was less than 0,007. The pH value hardly affects the dispersion property of BaTiO3 suspension dispersed by NH4-La-CA. BaTiO3 powder could be well dispersed （median size D50=0.45 μm） and also doped with high uniformity of added components by adsorbing citric acid chelate on surface. Compared with solid mixing, better microstructure and properties of La/Mn codoped ceramics were obtained by adsorption method.

Strong synergy between physical and chemical properties:Insight into optimization of atomically dispersed oxygen reduction catalysts

Atomically dispersed catalysts exhibit significant influence on facilitating the sluggish oxygen reduction reaction(ORR)kinetics with high atom economy,owing to remarkable attributes including nearly 100%atomic utilization and exceptional catalytic functionality.Furthermore,accurately controlling atomic physical properties including spin,charge,orbital,and lattice degrees of atomically dispersed catalysts can realize the optimized chemical properties including maximum atom utilization efficiency,homogenous active centers,and satisfactory catalytic performance,but remains elusive.Here,through physical and chemical insight,we review and systematically summarize the strategies to optimize atomically dispersed ORR catalysts including adjusting the atomic coordination environment,adjacent electronic orbital and site density,and the choice of dual-atom sites.Then the emphasis is on the fundamental understanding of the correlation between the physical property and the catalytic behavior for atomically dispersed catalysts.Finally,an overview of the existing challenges and prospects to illustrate the current obstacles and potential opportunities for the advancement of atomically dispersed catalysts in the realm of electrocatalytic reactions is offered.

Tunable dispersion relations manipulated by strain in skyrmion-based magnonic crystals

We theoretically investigate the propagation characteristics of spin waves in skyrmion-based magnonic crystals. It is found that the dispersion relation can be manipulated by strains through magneto-elastic coupling. Especially, the allowed bands and forbidden bands in dispersion relations shift to higher frequency with strain changing from compressive to tensile,while shifting to lower frequency with strain changing from tensile to compressive. We also confirm that the spin wave with specific frequency can pass the magnonic crystal or be blocked by tuning the strains. The result provides an advanced platform for studying the tunable skyrmion-based spin wave devices.

Pipeline thickness estimation using the dispersion of higher-order SH guided waves

Thickness measurement plays an important role in the monitoring of pipeline corrosion damage. However, the requirement for prior knowledge of the shear wave velocity in the pipeline material for popular ultrasonic thickness measurement limits its widespread application. This paper proposes a method that utilizes cylindrical shear horizontal(SH) guided waves to estimate pipeline thickness without prior knowledge of shear wave velocity. The inversion formulas are derived from the dispersion of higher-order modes with the high-frequency approximation. The waveform of the example problems is simulated using the real-axis integral method. The data points on the dispersion curves are processed in the frequency domain using the wave-number method. These extracted data are then substituted into the derived formulas. The results verify that employing higher-order SH guided waves for the evaluation of thickness and shear wave velocity yields less than1% error. This method can be applied to both metallic and non-metallic pipelines, thus opening new possibilities for health monitoring of pipeline structures.

Application of Exergy for Research on Increasing the Usefulness of Solar Radiation by Dispersing It into Monochromatic Beams

Energy determines the ability of matter to work. However, in the given environment, the real usefulness to perform work is determined by exergy. This study covers not only solar, but also any monochromatic thermal radiation. The value of such radiation was determined by its exergy and the ratio of its exergy-to-energy. A novelty in this work is to demonstrate by means of exergy that the usefulness of thermal polychromatic radiation can be increased by its dispersion to monochromatic radiation. This effect is the greater, the lower the temperature of the radiation. Analogies of this effect to the exergetic effect of gas separation have been indicated. The effect of the increase in exergy in the process of radiation dispersion was interpreted by means of a cylinder-piston system that explains this effect with the influence of environmental radiation. The concept of quasi-monochromatic and cumulated radiation was introduced into dispersion considerations and the change in the energetic, entropic and environmental components of the exergy of radiation beams was analyzed. Considerations were illustrated with appropriate examples of calculations considering dispersion of high-temperature radiation, such as extraterrestrial solar radiation and dispersion of low-temperature radiation from water vapor.

Delta distribution of electronegative plasma predicted by reformed“spring oscillator”dynamic equation with dispersing force

In our relevant paper[Zhao S X(2021)Chin.Phys.B 30055201],a delta distribution of negative ions is given by fluid simulation and preliminarily explained by decomposed anions transport equation.In the present work,first,the intrinsic connection between the electropositive plasma transport equation and spring oscillator dynamic equation is established.Inspired by this similarity,reformed“spring oscillator”equation with dispersing instead of restoring force that gives quasi-delta solution is devised according to the math embodied in the anion equation,which is of potential significance to the disciplines of atomic physics and astronomy as well.For solving the“diffusion confusion”the physics that determines the delta profile within the continuity equation is explored on the basis that recombination loss source term plays the role of drift flux,which is applicable for fluid model of low temperature plasma,but not the ordinary fluid dynamics.Besides,the math and physics revealed in this work predict that the ratio of recombination or attachment(for electrons)frequency versus the species diffusion coefficient is a very important parameter in determining the delta distribution,as it acts as the acceleration of object,according to the reformed oscillator equation.With this theory,the analogous delta profile of electrons density in the famous drift and ambi-polar diffusion heating mechanism of electronegative capacitively coupled plasma is interpreted.

Study on a new nano-dispersing agent and its effect for increasing suspension ability of alcohol-based coatings

A study for further improving the suspension rate of alcohol-based coatings using a new nano-dispersing agent has been presented in this paper. The results of experiments show that the new nano-dispersing agent should be used in combination with organic auxiliary agent which significantly increases the suspension effect of alcohol-based coatings. By the methods, the suspension rates of 99%, 98%, 96% and 94% can be achieved at 2h, 2h, 48h and 72h, respectively. These alcohol-based coatings have characters of higher strength, lower gas evolution, better brush ability and no blister after ignition.

Patterns and drivers of avian taxonomic and phylogenetic beta diversity in China vary across geographical backgrounds and dispersal abilities

Geographical background and dispersal ability may strongly influence assemblage dissimilarity;however,these aspects have generally been overlooked in previous large-scale beta diversity studies.Here,we examined whether the patterns and drivers of taxonomic beta diversity(TBD)and phylogenetic beta diversity(PBD)of breeding birds in China vary across(1)regions on both sides of the Hu Line,which demarcates China’s topographical,climatic,economic,and social patterns,and(2)species with different dispersal ability.TBD and PBD were calculated and partitioned into turnover and nestedness components using a moving window approach.Variables representing climate,habitat heterogeneity,and habitat quality were employed to evaluate the effects of environmental filtering.Spatial distance was considered to assess the impact of dispersal limitation.Variance partitioning analysis was applied to assess the relative roles of these variables.In general,the values of TBD and PBD were high in mountainous areas and were largely determined by environmental filtering.However,different dominant environmental filters on either side of the Hu Line led to divergent beta diversity patterns.Specifically,climate-driven species turnover and habitat heterogeneity-related species nestedness dominated the regions east and west of the line,respectively.Additionally,bird species with stronger dispersal ability were more susceptible to environmental filtering,resulting in more homogeneous assemblages.Our results indicated that regions with distinctive geographical backgrounds may present different ecological factors that lead to divergent assemblage dissimilarity patterns,and dispersal ability determines the response of assemblages to these ecological factors.Identifying a single universal explanation for the observed pattern without considering these aspects may lead to simplistic or incomplete conclusions.Consequently,a comprehensive understanding of large-scale beta diversity patterns and effective planning of conservation strategies necessitate the consideration of both geographical background and species dispersal ability.

Modeling Analysis of Factors Influencing Wind-Borne Seed Dispersal: A Case Study on Dandelion

A weed is a plant that thrives in areas of human disturbance, such as gardens, fields, pastures, waysides, and waste places where it is not intentionally cultivated. Dispersal affects community dynamics and vegetation response to global change. The process of seed disposal is influenced by wind, which plays a crucial role in determining the distance and probability of seed dispersal. Existing models of seed dispersal consider wind direction but fail to incorporate wind intensity. In this paper, a novel seed disposal model was proposed in this paper, incorporating wind intensity based on relevant references. According to various climatic conditions, including temperate, arid, and tropical regions, three specific regions were selected to establish a wind dispersal model that accurately reflects the density function distribution of dispersal distance. Additionally, dandelions growth is influenced by a multitude of factors, encompassing temperature, humidity, climate, and various environmental variables that necessitate meticulous consideration. Based on Factor Analysis model, which completely considers temperature, precipitation, solar radiation, wind, and land carrying capacity, a conclusion is presented, indicating that the growth of seeds is primarily influenced by plant attributes and climate conditions, with the former exerting a relatively stronger impact. Subsequently, the remaining two plants were chosen based on seed weight, yielding consistent conclusion.

Discontinuities of Banana Integrals in Dispersion Relation Representation

We derive the discontinuities of banana integrals using the dispersion relation iteratively,and find a series of identities between the parameterized discontinuities of banana integrals(p-DOBIs).Similar to elliptic integrals,these identities enable the reduction of various p-DOBIs to be a linear combination of some fundamental ones.We present a practical application of p-DOBIs for deriving the Picard–Fuchs operator.Then we establish the expression of generalized dispersion relation,which enables us to obtain the dispersion relation representation of arbitrary banana integrals.Moreover,we propose a hypothesis for generalized dispersion relation and p-DOBIs,which provides a simple way to calculate the discontinuities and transform dispersion relation representation to p-DOBIs.

A simple atomization approach enables monolayer dispersion of nano graphenes in cementitious composites with excellent strength gains

Carbon nano additives(CNAs)are critical to achieving the unique properties of functionalized composites,however,controlling the dispersion of CNAs in material matrix is always a challenging task.In this study,a simple atomization approach was successfully developed to promote the dispersion efficiency of graphene nanoplatelets(GNPs)in cement composites.This atomization approach can be integrated with the direct,indirect and combined ultrasonic stirrings in a homemade automatic stirring-atomization device.Mechanical and microstructure tests were performed on hardened cement pastes blended with GNPs in different stirring and mixing approaches.Results show that the direct ultrasonic stirrings enabled more homogeneous dispersions of GNP particles with a smaller size for a longer duration.The atomized droplets with the mean size of~100μm largely mitigated GNPs’agglomerations.Monolayer GNPs were observed in the cement matrix with the strength gain by up to 54%,and the total porosity decrease by 21%in 0.3 wt%GNPs dosage.The greatly enhanced dispersion efficiency of GNPs in cement also raised the cement hydration.This work provides an effective and manpower saving technique toward dispersing CNAs in engineering materials with great industrialization prospects.

Dispersion Relations in Diffraction in Time

In agreement with Titchmarsh’s theorem, we prove that dispersion relations are just the Fourier-transform of the identity, g(x′)=±Sgn(x′)g(x′), which defines the property of being a truncated functions at the origin. On the other hand, we prove that the wave-function of a generalized diffraction in time problem is just the Fourier-transform of a truncated function. Consequently, the existence of dispersion relations for the diffraction in time wave-function follows. We derive these explicit dispersion relations.

Real-time data processing method for CO_(2) dispersion interferometer on EAST

A real-time data processing system is designed for the carbon dioxide dispersion interferometer(CO_(2)-DI)on EAST.The system utilizes the parallel and pipelining capabilities of an fieldprogrammable gate array(FPGA)to digitize and process the intensity of signals from the detector.Finally,the real-time electron density signals are exported through a digital-to-analog converter(DAC)module in the form of analog signals.The system has been successfully applied in the CO_(2)-DI system to provide low-latency electron density input to the plasma control system on EAST.Experimental results of the latest campaign with long-pulse discharges on EAST(2022–2023)demonstrate that the system can respond effectively in the case of rapid density changes,proving its reliability and accuracy for future electron density calculation.

CFD-PBM coupled modeling of the liquid-liquid dispersion characteristics and structure optimization for Kenics static mixer

Kenics static mixers(KSM)are extensively used in industrial mixing-reaction processes by virtue of high mixing efficiency,low power homogenization and easy continuous production.Resolving liquid droplet size and its distribution and thus revealing the dispersion characteristics are of great significance for structural optimization and process intensification in the KSM.In this work,a computational fluid dynamics-population balance model(CFD-PBM)coupled method is employed to systematically investigate the effects of operating conditions and structural parameters of KSM on droplet size and its distribution,to further reveal the liquid-liquid dispersion characteristics.Results indicate that higher Reynolds numbers or higher dispersed phase volume fractions increase energy dissipation,reducing Sauter mean diameter(SMD)of dispersed phase droplets and with a shift in droplet size distribution(DSD)towards smaller size.Smaller aspect ratios,greater blade twist and assembly angles amplify shear rate,leading to smaller droplet size and a narrower DSD in the smaller range.The degree of impact exerted by the aspect ratio is notably greater.Notably,mixing elements with different spin enhance shear and stretching efficiency.Compared to the same spin,SMD becomes 3.7-5.8 times smaller in the smaller size range with a significantly narrower distribution.Taking into account the pressure drop and efficiency in a comprehensive manner,optimized structural parameters for the mixing element encompass an aspect ratio of 1-1.5,a blade twist angle of 180°,an assembly angle of 90°,and interlaced assembly of adjacent elements with different spin.This work provides vital theoretical underpinning and future reference for enhancing KSM performance.

Effect of trigger system on experimental dispersion characteristics of active surface wave testing

A trigger system is typically employed in active seismic testing to trigger and synchronize multichannel surface wave data acquisition.The effect of the trigger system on the dispersion image of surface waves is empirically known to be negligible,however,theoretical explanation regarding the effect of the trigger system is insufficient.This study systematically examines the theory for surface wave dispersion analysis and proves that the effect of the trigger system on a dispersion image is negligible via a solid theoretical explanation.Subsequently,based on the new theoretical explanation,an alternative method that uses only the relative phase difference between sensors to extract dispersion characteristics with better conceptual clarity is proposed.Two active surface wave testing cases are considered to validate the theory and method.The results indicate that(1)an accurate trigger system is not necessary for surface wave data acquisition,and(2)it is unnecessary to assume that the impact point is the generation point of the surface waves for the experimental dispersion analysis.