Review of the Configuration and Transient Stability of Large-scale Renewable Energy Generation through Hybrid DC Transmission

Based on the complementary advantages of Line Commutated Converter(LCC)and Modular Multilevel Converter(MMC)in power grid applications,there are two types of hybrid DC system topologies:one is the parallel connection of LCC converter stations and MMC converter stations,and the other is the series connection of LCC and MMC converter stations within a single station.The hybrid DC transmission system faces broad application prospects and development potential in large-scale clean energy integration across regions and the construction of a new power system dominated by new energy sources in China.This paper first analyzes the system forms and topological characteristics of hybrid DC transmission,introducing the forms and topological characteristics of converter-level hybrid DC transmission systems and system-level hybrid DC transmission systems.Next,it analyzes the operating characteristics of LCC and MMC inverter-level hybrid DC transmission systems,provides insights into the transient stability of hybrid DC transmission systems,and typical fault ride-through control strategies.Finally,it summarizes the networking characteristics of the LCC-MMC series within the converter station hybrid DC transmission system,studies the transient characteristics and fault ridethrough control strategies under different fault types for the LCC-MMC series in the receiving-end converter station,and investigates the transient characteristics and fault ride-through control strategies under different fault types for the LCC-MMC series in the sending-end converter station.

Key stress extraction and equivalent test method for hybrid DC circuit breaker

Firstly, relevant stress properties of millisecond level breaking process and microsecond level commutation process of hybrid HVDC circuit breaker are studied in detail on the basis of the analysis for the application environment and topological structure and operating principles of hybrid circuit breakers, and key stress parameters in transient state process of two time dimensions are extracted. The established digital simulation circuit for PSCAD/EMTDC device-level operation of the circuit breaker has verified the stress properties of millisecond level breaking process and microsecond level commutation process. Then, equivalent test method, circuits and parameters based on LC power supply are proposed on the basis of stress extraction. Finally, the results of implemented breaking tests for complete 200 kV circuit breaker, 100 kV and 50 kV circuit breaker units, as well as single power electronic module have verified the accuracy of the simulation circuit and mathematical analysis. The result of this paper can be a guide to electrical structure and test system design of hybrid HVDC circuit breaker.

A Fault Current Limiting Hybrid DC Circuit Breaker

Due to the low impedance characteristic of the high voltage direct current(HVDC)grid,the fault current rises extremely fast after a DC-side fault occurs,and this phenomenon seriously endangers the safety of the HVDC grid.In order to suppress the rising speed of the fault current and reduce the current interruption requirements of the main breaker(MB),a fault current limiting hybrid DC circuit breaker(FCL-HCB)has been proposed in this paper,and it has the capability of bidirectional fault current limiting and fault current interruption.After the occurrence of the overcurrent in the HVDC grid,the current limiting circuit(CLC)of FCL-HCB is put into operation immediately,and whether the protected line is cut off or resumed to normal operation is decided according to the fault detection result.Compared with the traditional hybrid DC circuit breaker(HCB),the required number of semiconductor switches and the peak value of fault current after fault occurs are greatly reduced by adopting the proposed device.Extensive simulations also verify the effectiveness of the proposed FCL-HCB.

Low-loss and Compact Hybrid DC Circuit Breaker Scheme Using Self-commutated Semiconductor Switch Module

In traditional hybrid DC circuit breakers(HCBs)schemes,complex equipment is usually required to ensure current commutation from mechanical to semiconductor switches,which cause not only additional construction costs and volume but also additional losses and maintenance work.Different from this condition,a low-loss and compact HCB scheme that does not use separate current commutation equipment is proposed in this study.By rationally using the charge and discharge of the snubber capacitor,the self-commutated semiconductor switch(SCS)module can integrate both the current commutation and shutdown functions,thereby greatly reducing cost and volume.The working process is discussed and analyzed in detail,and then a 10-kA prototype is developed and tested,which verifies the feasibility and effectiveness of the proposed scheme.Index Terms-HVDC circuit breakers,hybrid DC circuit breakers(HCBs),self-commutated semiconductor switch(SCS).

基于电磁时间反演的VSC-HVDC系统架空线-电缆混合线路故障定位方法

针对传统故障定位方法无法应用于架空线-电缆混合直流线路的问题,提出了一种架空线-电缆混合直流线路的故障定位方法,该方法采用先确定故障点所在区段、后在区段中定位的原理。利用故障附加网络的直流分量定义了故障区段判别函数,通过该判别函数在不同区段发生故障时数值不同实现故障区段的判定。然后,分析了电磁时间反演理论在故障定位中的可行性,分析确定了故障特征谐波。利用线路两端特征谐波的电流行进波作为时间反演电路的电流源,设置与原线路拓扑结构镜像的线路,利用时间反演电流源与镜像线路构建时间反演电路。在此基础上,根据时间反演的能量聚焦特性列写故障区段内的故障定位方程并实现区段内故障定位。利用PSCAD/EMTDC搭建的电压源型换流器高压直流输电(VSC-HVDC)系统仿真证明了所提方法能实现线缆混合直流输电线路的故障定位。

Research on power electronic transformer applied in AC/DC hybrid distribution networks

The AC/DC hybrid distribution network is one of the trends in distribution network development, which poses great challenges to the traditional distribution transformer. In this paper, a new topology suitable for AC/DC hybrid distribution network is put forward according to the demands of power grid, with advantages of accepting DG and DC loads, while clearing DC fault by blocking the clamping double sub-module(CDSM) of input stage. Then, this paper shows the typical structure of AC/DC distribution network that is hand in hand. Based on the new topology, this paper designs the control and modulation strategies of each stage, where the outer loop controller of input stage is emphasized for its twocontrol mode. At last, the rationality of new topology and the validity of control strategies are verified by the steady and dynamic state simulation. At the same time, the simulation results highlight the role of PET in energy regulation.

MMC-HVDC交直流混联系统小扰动稳定域迭代求解和形态分析

随着高压直流输电技术的发展,区域电力系统将拓展为大规模交直流混联系统。因此,需要建立可以同时精确刻画交直流动态的大规模交直流混联系统模型来研究混联系统的动态与稳定性。文中考虑了交流侧和直流侧的详细动态,建立了异步联网的模块化多电平换流器型高压直流(MMC-HVDC)交直流混联系统的状态空间模型,给出了具体的解析解形式,并推导了多重迭代信赖域算法。所提算法建立了决策变量空间内的点与平衡点的映射关系,结合Hopf分岔识别边界,提出了一种多重迭代求解小扰动稳定域边界的方法。在利用Simulink仿真验证模型准确性后,以发电机出力作为决策变量绘制了交直流混联系统稳定域,利用特征根和参与因子定量研究了直流失稳和交流失稳的机理以及控制策略和控制参数对稳定域边界的影响。对比分析了多区域的混联系统与交流系统的稳定域,结果表明换流站和直流网络的引入可能使多区域系统稳定域边界呈现多约束共同决定的近似分段线性拓扑特性。

A One-Dimensional Hybrid Simulation of DC/RF Combined Driven Capacitive Plasma

We developed a one-dimensional hybrid model to simulate the DC/RF combined driven capacitively coupled plasma for argon discharges. The numerical results are used to analyze the influence of the DC source on the plasma density distribution, ion energy distributions （IEDs） and ion angle distributions （IADs） on both the RF and DC electrodes. The increase in DC voltage drives more high-energy ions to the electrode applied to the DC source, which makes the IEDs at the DC electrode shift towards higher energy, and the peaks in the IADs shift towards small angle regions. At the same time, it also decreases the ion energy at the RF electrode and enlarges the incident angles of the ions, which strike the RF electrode.

Practice and Prospect of AC/DC Hybrid Power Grid in Southern China

China Southern Power Grid is a unique EHV AC/DC hybrid transmission network that operates in China. In its service area, the distribution of energy resources and the development of economy are extremely unbalanced, so long-distance and bulk power transmission are needed; besides, the geography and climate conditions are serious, rains, fogs, lightning and typhoon as well as high temperature are common all the year round. Facing these challenges, the power grid enhanced stability control, improved the equipment and strengthen the network structure. In the future, the power grid plans to optimize the disposition of power sources and build digitalized power system.

基于三电平DC/DC变换器的混合储能系统控制策略

针对城轨交通电压等级高、能量流动大以及启动制动频繁等问题,提出一种基于三电平DC/DC变换器的混合储能系统控制策略。能量型储能装置通过并联扩容以满足高能量需求并起到维持直流牵引母线电压稳定的作用,功率型储能装置满足启动制动工况下的高功率需求并起到提高动态响应特性的作用。采用低通滤波器实现EESD和PESD的指令功率分配,采用下垂控制实现多组线路阻抗不同的EESD的功率均分,采用电压补偿控制减小直流牵引母线电压的控制误差。最后,在Matlab/Simulink仿真平台上进行了充放电、启动制动、轻载重载等工况下的仿真实验,验证了该控制方案的可行性和有效性。

混合随机波动模型下带随机工资的DC型养老金最优投资策略

针对养老金的保值增值问题,分析具有利率风险和波动风险的DC(defined contribution)型养老金最优投资策略。假设金融市场包含一种无风险资产和一种股票,其中股票价格服从混合随机波动(Heston-Hull-White)模型。设定养老金计划成员的工资是随机的。基于终端财富预期效用最大化标准,在CARA效用函数下,通过建立相应的HJB(Hamilton-Jacob-Bellman)方程,求解出最优投资策略,并利用数值算例分析主要模型参数对最优投资策略的影响。结果表明:风险规避系数的增大会导致投资者对股票的投资比例下降,利率风险和波动风险对DC型养老金的最优投资策略有显著影响。所得结果对基金管理者具有一定的指导作用。

混合级联型HVDC系统的后续换相失败预判方法

白鹤滩—江苏±800k V特高压直流输电工程于2022年7月1日在中国投运,在世界上首次创造性地研发应用了特高压混合级联直流输电新技术方案。基于此系统背景对逆变侧电网换相换流器(line commutated converter,LCC)进行具有一定时间裕度的后续换相失败预判。分析了LCC控制器对电气量的控制作用和模块化多电平换流器(modular multilevel converters,MMC)对LCC的电压支撑作用,明确了混合级联直流输电系统逆变侧LCC发生后续换相失败的机理。推导了逆变侧LCC在首次换相失败后恢复过程末期关断角与故障后线路传输功率最小值的关系,定义了阈值功率的概念。然后建立了关断角与阈值功率的定量关系,提出一种故障后直流传输功率最小值与功率阈值相比较的后续换相失败预判方法。最后在PSCAD/EMTDC中搭建了相应的仿真模型,验证了理论分析和预测方法的准确性。

增程式汽车12V DC/DC变换器输出熔断丝熔断问题分析及改进

增程式汽车作为当代传统燃油车向纯电动汽车过渡的车型,在汽车发展中占据着重要地位。DC/DC变换器作为增程式汽车的关键零部件之一,起着至关重要的作用。它将高压电池包输出的高压电转换为合适的电压,为整车及蓄电池供电,确保整车用电器正常用电需求的同时,保证低压蓄电池处于满电状态,是整车供电系统中不可或缺的一环。文章结合某增程式汽车DC/DC变换器输出熔断丝熔断导致蓄电池馈电的问题,进行深入排查,并确认问题发生的根本原因,进而提出优化改进方案,对提高增程式汽车供电系统的可靠性具有重要意义。

双向DC/DC变换器在混合动力汽车中的应用

随着用户对混合动力汽车的动力性能和油耗追求越来越高,搭载双向直流转直流(DC/DC)变换器成为满足用户要求的可能方向之一。文章针对双向DC/DC变换器在混合动力汽车中的应用,分别分析了本田动力控制单元(PCU)系统、不同的拓扑结构选型、双路交错拓扑收益等,并分析双向DC/DC变换器在混动系统中可能遇到技术难点,为混合动力汽车采用双向DC/DC变换器选择提供意见。

Improved Dynamic Response of DC to DC Converter Using Hybrid PSO Tuned Fuzzy Sliding Mode Controller

DC/DC switching converters are widely used in numerous appliances in modern existence. In this paper, the dynamic and transient response of phase shift series resonant DC/DC converter are improved using hybrid particle swarm optimization tuned fuzzy sliding mode controller under starting and load step change conditions. The aim of the control is to regulate the output voltage beneath the load change. The model of the hybrid particle swarm optimization tuned fuzzy sliding mode controller is implemented using Sim Power Systems toolbox of MATLAB SIMULINK. Performance of the proposed dynamic novel control under step load change condition is investigated.

降低多回HVDC同时换相失败风险的交直流混联受端系统STATCOM配置方案

在有多回直流馈入的交直流混联受端系统中,若交流系统短路故障引起多回直流同时换相失败,甚至闭锁,将对电网的安全运行造成严重影响。将风险的概念引入交直流系统同时换相失败问题,以三相短路故障为研究对象,提出一种以降低多回直流同时换相失败风险为目标的静止无功补偿器（static synchronous compensator,STATCOM）配置方法。首先提出一种考虑故障发生位置随机性的多回直流同时换相失败风险评价指标;根据换相电压幅值在故障暂态过程中跌落的规律以及STATCOM对暂态电压的调节特点,给出了预选故障的筛选和分类方法;建立了考虑同时换相失败风险的STATCOM优化配置模型,利用遗传算法求解该模型,得到不同风险下STATCOM的最优补偿方案;最后,通过仿真验证了配置方案的有效性。

含VSC-HVDC的交直流混合系统状态估计

针对以电压源换流器(VSC)为基础的新一代高压直流输电(HVDC),对含VSC-HVDC的交直流混合系统进行静态状态估计。介绍了VSC-HVDC的稳态模型,通过确定交直流混合系统的量测函数、状态变量和雅可比矩阵,建立了含VSC-HVDC的交直流混合系统的状态估计模型;在基本加权最小二乘状态估计算法的基础上,提出了含VSC-HVDC的交直流混合状态估计同时迭代求解法;对经过修改的IEEE 14、IEEE30、IEEE 57节点系统算例进行仿真,从算法的估计误差、迭代次数和计算速度等方面验证了算法的有效性和实用性。

含VSC-HVDC交直流混合系统机电暂态仿真研究

对含基于电压源型变流器的高压直流输电(VSC-HVDC)交直流混合系统进行机电暂态仿真研究。VSC-HVDC系统的外环功率、电压控制器采用PI控制,以产生内环电流参考值。针对dq同步旋转坐标系下VSC-HVDC交流侧数学模型不能精确解耦的问题,建立基于αβ静止坐标系的VSC-HVDC数学模型,引入比例谐振(PR)控制改进了内环电流控制器,可以无静差跟踪内环电流信号。采用以上控制策略实现VSCHVDC系统的精确解耦控制,并采用双时步仿真方法对VSC-HVDC系统的动态响应进行准确模拟。通过在新英格兰系统上进行仿真实验,验证了所提VSC-HVDC机电暂态控制模型的正确性和双时步混合仿真方法的有效性。

含VSC-HVDC的交直流混合发输电系统可靠性评估

建立了含柔性直流输电(voltage source converter based high voltage direct current,VSC-HVDC)的交直流混合发输电系统的可靠性分析模型,该模型既考虑了VSC-HVDC的稳态功率特性,还计及了发输电网络的故障率和输电线路的有功限制,采用非序惯蒙特卡罗仿真实现;在满足系统安全约束的前提条件下,对系统进行模拟调度,重点评价了与发输电网络连接的VSC-HVDC对电网可靠性的影响,给出系统和节点的风险指标,为VSC-HVDC规划和运行提供参考依据,最后算例分析证明了该算法的可行性和合理性。

风电场交直流混合输电并网中VSC-HVDC的控制

为提高风电场交直流混合输电并网的系统性能,提出一种更加灵活的电压源换流器高压直流(voltage source converter based high voltage direct current,VSC-HVDC)控制策略。对于风电场侧电压源换流器,设计了一种新的交流电压–功角控制方法。对于交直流混合输电模式,该方法通过调节风电场交流母线电压与电压源换流器输出电压间的功角来实现定有功功率控制。对于纯柔性直流输电模式,风电场交流母线电压自动被调节为具有恒幅恒频的交流电压,实现了对波动风电的同步输送。该方法中输电模式的变化无需切换控制;另外,通过附加电流高通滤波器增强了对系统谐振的阻尼作用。对电网侧电压源换流器,采用一种新的直接电流矢量控制,使直流电压稳定在参考值上。运用PSCAD/EMTDC仿真软件对分别接入笼型感应发电机(squirrel cage induction generator,SCIG)风电场和双馈感应发电机(doubly fed induction generator,DFIG)风电场的交直流混合输电系统建模仿真。一系列运行条件下的仿真结果验证了控制方法的有效性与可行性。