An 8-Node Plane Hybrid Element for StructuralMechanics Problems Based on the Hellinger-Reissner Variational Principle

The finite element method (FEM) plays a valuable role in computer modeling and is beneficial to the mechanicaldesign of various structural parts. However, the elements produced by conventional FEM are easily inaccurate andunstable when applied. Therefore, developing new elements within the framework of the generalized variationalprinciple is of great significance. In this paper, an 8-node plane hybrid finite element with 15 parameters (PHQ8-15β) is developed for structural mechanics problems based on the Hellinger-Reissner variational principle.According to the design principle of Pian, 15 unknown parameters are adopted in the selection of stress modes toavoid the zero energy modes.Meanwhile, the stress functions within each element satisfy both the equilibrium andthe compatibility relations of plane stress problems. Subsequently, numerical examples are presented to illustrate theeffectiveness and robustness of the proposed finite element. Numerical results show that various common lockingbehaviors of plane elements can be overcome. The PH-Q8-15β element has excellent performance in all benchmarkproblems, especially for structures with varying cross sections. Furthermore, in bending problems, the reasonablemesh shape of the new element for curved edge structures is analyzed in detail, which can be a useful means toimprove numerical accuracy.

ON THE EQUIVALENCE OF THE WILSON ELEMENT AND THE GENERALIZED HYBRID ELEMENT

In this paper the equivalence of the generalized hybrid element and the modified Wilson element, which is derived by the generalized hybrid method, is proved.

DEFORMATION RIGIDITY OF ASSUMED STRESS MODES IN HYBRID ELEMENTS

The new methods to determine the zero-energy deformation modes in the hybrid elements and the zero-energy stress modes in their assumed stress fields are presented by the natural deformation modes of the elements. And the formula of the additional element deformation rigidity due to additional mode into the assumed stress field is derived. Based on, it is concluded in theory that the zero-energy stress mode cannot suppress the zero-energy deformation modes but increase the extra rigidity to the nonzero-energy deformation modes of the element instead. So they should not be employed to assume the stress field. In addition, the parasitic stress modes will produce the spurious parasitic energy and result the element behaving over rigidity. Thus, they should not be used into the assumed stress field even though they can suppress the zero-energy deformation modes of the element. The numerical examples show the performance of the elements including the zero-energy stress modes or the parasitic stress modes.

Contribution to the Full 3D Finite Element Modelling of a Hybrid Stepping Motor with and without Current in the Coils

The paper presents our contribution to the full 3D finite element modelling of a hybrid stepping motor using COMSOL Multiphysics software. This type of four-phase motor has a permanent magnet interposed between the two identical and coaxial half stators. The calculation of the field with or without current in the windings (respectively with or without permanent magnet) is done using a mixed formulation with strong coupling. In addition, the local high saturation of the ferromagnetic material and the radial and axial components of the magnetic flux are taken into account. The results obtained make it possible to clearly observe, as a function of the intensity of the bus current or the remanent induction, the saturation zones, the lines, the orientations and the magnetic flux densities. 3D finite element modelling provide more accurate numerical data on the magnetic field through multiphysics analysis. This analysis considers the actual operating conditions and leads to the design of an optimized machine structure, with or without current in the windings and/or permanent magnet.

APPLICATION OF PENALTY FUNCTION METHOD IN ISOPARANIETRIC HYBRID FINITE ELEMENT ANALYSIS

By the aid of the penalty function method, the equilibrium restriction conditions were introduced to the isoparametric hybrid finite element analysis, and the concrete application course of the penalty function method in three-dimensional isoparametdc hybrid finite element was discussed. The separated penalty parameters method and the optimal hybrid element model with penalty balance were also presented. The penalty balance method can effectively refrain the parasitical stress on the premise of no additional degrees of freedom. The numeric experiment shows that the presented element not only is effective in improving greatly the numeric calculation precision of distorted grids but also has the universality.

An Arbitrary Polygonal Stress Hybrid Element for Structural Dynamic Response Analysis

This paper constructs a new two-dimensional arbitrary polygonal stress hybrid dynamic(APSHD)element for structural dynamic response analysis.Firstly,the energy function is established based on Hamilton's principle.Then,the finite element time-space discrete format is constructed using the generalized variational principle and the direct integration method.Finally,an explicit polynomial form of the combined stress solution is give,and its derivation process is shown in detail.After completing the theoretical construction,the numerical calculation program of the APSHD element is written in Fortran,and samples are verified.Models show that the APSHD element performs well in accuracy and convergence.Furthermore,it is insensitive to mesh distortion and has low dependence on selecting time steps.

A New Classification Method of Stress Modes in Hybrid Stress Finite Element

The paper presents a new method for classifying the stress modes in hybrid stress finite element in terms of natural stress modes in finite element and the rank analysis of matrix G in forming element It reveals the relation among the different assumed stress field, and gives the general method in forming stress field Comparing with the method of eigenvalue analysis, the new method is more efficient

EQUIVALENCE BETWEEN TONG HYBRID PLATE ELEMENT WITH CONSTANT MOMENTS AND NONCONFORMING MORLEY PLATE ELEMENT

在这篇论文中我们证明了董平常力矩杂交板元与非协调Ｍｏｒｌｅｙ板元具有相同的单元刚度矩阵，因此这两个板元是等价的。

A PENALTY-EQUILIBRATING HYBRID STRESS 3-D ELEMENT

This paper presents a theory about penalty-equilibrating(PEQ)hybrid element of three dimensions (3-D), and generates a model forthe PEQ hybrid stress 3-D element. By the PEQ ap- proach, the falsestress is avoided and the precision in calculation is raised to alarge extent under the mesh distortion condition without anotheradditional degree of freedom. In the results of numerical ex- amples,the present element is compared with the 8-node hexahedron elementand the optimized hybrid element, and it is proved that ourconclusion is correct. In addition, the penalty-equilibrating hybrid3-D element is taken as a trial to calculate problems of square platebending and incompressibility. The results obtained are satisfactory.

THE STRESS SUBSPACE OF HYBRID STRESS ELEMENT AND THE DIAGONALIZATION METHOD FOR FLEXIBILITY MATRIX H

The following is proved: 1) The linear independence of assumed stress modes is the necessary and sufficient condition for the nonsingular flexibility matrix; 2) The equivalent assumed stress modes lead to the identical hybrid element. The Hilbert stress subspace of the assumed stress modes is established. So, it is easy to derive the equivalent orthogonal normal stress modes by Schmidt's method. Because of the resulting diagonal flexibility matrix, the identical hybrid element is free from the complex matrix inversion so that the hybrid efficiency, is improved greatly. The numerical examples show that the method is effective.

A quadrilateral membrane hybrid stress element with drilling degrees of freedom

A new kind of quadrilateral assumed stress hy- brid membrane element with drilling degrees of freedom and a traction-free inclined side has been developed based on an extended Hellinger-Reissner principle which is established by expanding the essential terms of the assumed stress field as polynomials in the natural coordinates of the element. The homogeneous equilibrium equations are imposed in a variational sense through the internal displacements which are also expanded in the natural coordinates, while the tractionfree conditions along the inclined side are satisfied exactly. The use of such special element in the finite element solution is shown to be highly accurate when only a very coarse element mesh is used for plates with V-shaped rounded notches or inclined sides.

Hybrid graded element model for transient heat conduction in functionally graded materials

This paper presents a hybrid graded element model for the transient heat conduction problem in functionally graded materials （FGMs）. First, a Laplace transform approach is used to handle the time variable. Then, a fundamental solution in Laplace space for FGMs is constructed. Next, a hybrid graded element is formulated based on the obtained fundamental solution and a frame field. As a result, the graded properties of FGMs are naturally reflected by using the fundamental solution to interpolate the intra-element field. Further, Stefest＇s algorithm is employed to convert the results in Laplace space back into the time-space domain. Finally, the performance of the proposed method is assessed by several benchmark examples. The results demonstrate well the efficiency and accuracy of the proposed method.

A hybrid-stress element based on Hamilton principle

A novel hybrid-stress finite element method is proposed for constructing simple 4-node quadrilateral plane elements, and the new element is denoted as HH4-3fl here. Firstly, the theoretical basis of the traditional hybrid-stress elements, i.e., the Hellinger-Reissner variational principle, is replaced by the Hamilton variational principle, in which the number of the stress variables is reduced from 3 to 2. Secondly, three stress parameters and corresponding trial functions are introduced into the system equations. Thirdly, the displacement fields of the conventional bilinear isoparametric element are employed in the new models. Finally, from the stationary condition, the stress parameters can be expressed in terms of the displacement parameters, and thus the new element stiffness matrices can be obtained. Since the required number of stress variables in the Hamilton variational principle is less than that in the Hellinger-Reissner variational principle, and no additional incompatible displacement modes are considered, the new hybrid-stress element is simpler than the traditional ones. Furthermore, in order to improve the accuracy of the stress solutions, two enhanced post-processing schemes are also proposed for element HH4-3β. Numerical examples show that the proposed model exhibits great improvements in both displacement and stress solutions, implying that the proposed technique is an effective way for developing simple finite element models with high performance.

COARSE-MESH-ACCURACY IMPROVEMENT OF BILINEAR Q_4-PLANE ELEMENT BY THE COMBINED HYBRID FINITE ELEMENT METHOD

The combined hybrid finite element method is of an intrinsic mechanism of enhancing coarse-mesh-accuracy of lower order displacement schemes. It was confirmed that the combined hybrid scheme without energy error leads to enhancement of accuracy at coarse meshes, and that the combination parameter plays an important role in the enhancement. As an improvement of conforming bilinear Q(4)-plane element, the combined hybrid method adopted the most convenient quadrilateral displacements-stress mode, i.e.,the mode of compatible isoparametric bilinear displacements and pure constant stresses. By adjusting the combined parameter, the optimized version of the combined hybrid element was obtained and numerical tests indicated that this parameter-adjusted version behaves much better than Q(4)-element and is of high accuracy at coarse meshes. Due to elimination of stress parameters at the elemental level, this combined hybrid version is of the same computational cost as that of Q(4)-element.

Hybrid natural element method for viscoelasticity problems

A hybrid natural element method（HNEM） for two-dimensional viscoelasticity problems under the creep condition is proposed. The natural neighbor interpolation is used as the test function, and the discrete equation system of the HNEM for viscoelasticity problems is obtained using the Hellinger–Reissner variational principle. In contrast to the natural element method（NEM）, the HNEM can directly obtain the nodal stresses, which have higher precisions than those obtained using the moving least-square（MLS） approximation. Some numerical examples are given to demonstrate the validity and superiority of this HNEM.

Orthogonal basic deformation mode method for zero-energy mode suppression of hybrid stress elements

A set of basic deformation modes for hybrid stress finite elements are directly derived from the element displacement field. Subsequently, by employing the so-called united orthogonal conditions, a new orthogonalization method is proposed. The result- ing orthogonal basic deformation modes exhibit simple and clear physical meanings. In addition, they do not involve any material parameters, and thus can be efficiently used to examine the element performance and serve as a unified tool to assess different hybrid elements. Thereafter, a convenient approach for the identification of spurious zero-energy modes is presented using the positive definiteness property of a flexibility matrix. More- over, based on the orthogonality relationship between the given initial stress modes and the orthogonal basic deformation modes, an alternative method of assumed stress modes to formulate a hybrid element free of spurious modes is discussed. It is found that the orthogonality of the basic deformation modes is the sufficient and necessary condition for the suppression of spurious zero-energy modes. Numerical examples of 2D 4-node quadrilateral elements and 3D 8-node hexahedral elements are illustrated in detail to demonstrate the efficiency of the proposed orthogonal basic deformation mode method.

Hybrid natural element method for large deformation elastoplasticity problems

We present the hybrid natural element method（HNEM） for two-dimensional elastoplastic large deformation problems. Sibson interpolation is adopted to construct the shape functions of nodal incremental displacements and incremental stresses. The incremental form of Hellinger–Reissner variational principle for elastoplastic large deformation problems is deduced to obtain the equation system. The total Lagrangian formulation is used to describe the discrete equation system.Compared with the natural element method（NEM）, the HNEM has higher computational precision and efficiency in solving elastoplastic large deformation problems. Some numerical examples are selected to demonstrate the advantage of the HNEM for large deformation elastoplasticity problems.

MIXED COMPATIBLE ELEMENT AND MIXED HYBRID INCOMPATIBLE ELEMENT VARIATIONAL METHODS IN DYNAMICS OF VISCOUS BAROTROPIC FLUIDS

This paper presents and proves the mixed compatible finite element variationalprinciples in dynamics of viscous barotropic fluids. When the principles are proved, itis found that the compatibility conditions of stress can be naturally satisfied. The gene-rallzed variational principles with mixed hybrid incompatible finite elements are alsopresented and proved, and they can reduce the computation of incompatible elements indynamics of viscous barotropic flows.

THEORETICAL BASIS AND GENERAL OPTIMAL FORMULATIONS OF ISOPARAMETRIC GENERALIZED HYBRID/MIXED ELEMENT MODEL FOR IMPROVED STRESS ANALYSIS

By the modified three-field Hu-Washizu principle, this paper establishes a theoretical founda- tion and general convenient formulations to generate convergent stable generalized hybrid/mixed cle- ment (GH/ME) model which is invariant with respect to coordinate, insensitive to geometric distortion and suitable for improved stress computation. In the two proposed formulations, the stress equilibrium and orthogonality constraints are imposed through incompatible displacement and internal strain modes respectively. The proposed model by the general formulations in this paper is characterized by including as- sumed stress/strain, assumed stress, variable-node, singular, compatible and incompatible GH/ME models. When using regular meshes or the constant values of the isoparametric Jacobian Det in the assumed strain in- terpolation, the incompatible GH/ME model degenerates to the hybrid/mixed element model. Both general and concrete guidelines for the optimal selection of element shape functions are suggested. By means of the GH/ME theory in this paper, a family of new GH/ME can be and have been easily constructed. The software can also be developed conveniently because all the standard subroutines for the corresponding isoparametric displacement elements can be utilized directly.

A NEW HYBRID QUADRILATERAL FINITE ELEMENT FOR MINDLIN PLATE

In this paper a new quadrilateral plate element concerning the effect of transverse shear strain has been presented. It is derived from the hybrid finite element model based on the principles of virtual work. The outstanding advantage of this element is to use more rational trial functions of the displacements. For this reason, every variety of plate deformation can be simulated really whilc the least degrees of freedom is employed.A wide range of numerical tests was conducted and the results illustrate that this element has a very wide application scope to the thickness of plates and satisfactory accuracy can be obtained by coarse mesh for all kinds of examples.