Advanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms,and the generalized analysis method and concise kinematics transfer matrix are obtained.In this study,first,acco...Advanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms,and the generalized analysis method and concise kinematics transfer matrix are obtained.In this study,first,according to the kinematics analysis of serial mechanisms,the basic principles of Lie groups and Lie algebras are briefly explained in dealing with the spatial switching and differential operations of screw vectors.Then,based on the standard ideas of Lie operations,the method for kinematics analysis of parallel mechanisms is derived,and Jacobian matrix and Hessian matrix are formulated recursively and in a closed form.Then,according to the mapping relationship between the parallel joints and corresponding equivalent series joints,a forward kinematics analysis method and two inverse kinematics analysis methods of hybrid mechanisms are examined.A case study is performed to verify the calculated matrices wherein a humanoid hybrid robotic arm with a parallel-series-parallel configuration is considered as an example.The results of a simulation experiment indicate that the obtained formulas are exact and the proposed method for kinematics analysis of hybrid mechanisms is practically feasible.展开更多
This paper presents a novel one-axis linear-drive control system, in which wire rope is wound orderly around drum by servo motor drive and drays the working slider for a long linear reciprocating motion. PKM with this...This paper presents a novel one-axis linear-drive control system, in which wire rope is wound orderly around drum by servo motor drive and drays the working slider for a long linear reciprocating motion. PKM with this control system is metamorphic and can achieve great feed forces, accelerations and transverse speeds, high accuracy and low cost. The metamorphic characteristics are studied, including the metamorphic condition, con- tents, process as well as procedures. The kinematics computation model is established and analyzed.展开更多
Achieving optimal alignment in total knee arthroplasty(TKA) is a critical factor in ensuring optimal outcomes and long-term implant survival. Traditionally, mechanical alignment has been favored to achieve neutral pos...Achieving optimal alignment in total knee arthroplasty(TKA) is a critical factor in ensuring optimal outcomes and long-term implant survival. Traditionally, mechanical alignment has been favored to achieve neutral postoperative joint alignment. However, contemporary approaches, such as kinematic alignments and hybrid techniques including adjusted mechanical, restricted kinematic, inverse kinematic, and functional alignments, are gaining attention for their ability to restore native joint kinematics and anatomical alignment, potentially leading to enhanced functional outcomes and greater patient satisfaction. The ongoing debate on optimal alignment strategies considers the following factors: long-term implant durability, functional improvement, and resolution of individual anatomical variations. Furthermore, advancements of computer-navigated and robotic-assisted surgery have augmented the precision in implant positioning and objective measurements of soft tissue balance. Despite ongoing debates on balancing implant longevity and functional outcomes, there is an increasing advocacy for personalized alignment strategies that are tailored to individual anatomical variations. This review evaluates the spectrum of various alignment techniques in TKA, including mechanical alignment, patient-specific kinematic approaches, and emerging hybrid methods. Each technique is scrutinized based on its fundamental principles, procedural techniques, inherent advantages, and potential limitations, while identifying significant clinical gaps that underscore the need for further investigation.展开更多
In order to satisfy the requirements of large workspace and high dexterity for processing equipment of oversized cylindrical boxes′spherical crown surfaces in the aerospace industry,a novel serial-parallel hybrid pro...In order to satisfy the requirements of large workspace and high dexterity for processing equipment of oversized cylindrical boxes′spherical crown surfaces in the aerospace industry,a novel serial-parallel hybrid processing robot mechanism is proposed.The degrees of freedom of the 5PUS-(2UR)PU parallel mechanism are obtained by using the screw theory.The inverse kinematics of the hybrid mechanism are analyzed and the velocity Jacobian matrix is established.Then,the constraints of the main factors influencing workspace of the mechanism are given,and the position and posture workspace are obtained.Next,the dexterity and stiffness performance of the mechanism is analyzed based on the Jacobian matrix.The virtual prototype is established,and the theoretical calculation and simulation analysis of the hybrid mechanism with arc curve as the processing trajectory are carried out by using Matlab and Adams software.The research results show that the mechanism can satisfy the requirements of large workspace and high dexterity of oversized cylindrical boxes′spherical crown surface processing,and has feasibility and practical application value.展开更多
基金Supported by Zhejiang Province Foundation for Distinguished Young Scholars of China(Grant No.LR18E050003)National Natural Science Foundation of China(Grant Nos.51975523,51475424,51905481)Open Foundation of the State Key Laboratory of Fluid Power and Mechatronic Systems(Grant No.GZKF-201906).
文摘Advanced mathematical tools are used to conduct research on the kinematics analysis of hybrid mechanisms,and the generalized analysis method and concise kinematics transfer matrix are obtained.In this study,first,according to the kinematics analysis of serial mechanisms,the basic principles of Lie groups and Lie algebras are briefly explained in dealing with the spatial switching and differential operations of screw vectors.Then,based on the standard ideas of Lie operations,the method for kinematics analysis of parallel mechanisms is derived,and Jacobian matrix and Hessian matrix are formulated recursively and in a closed form.Then,according to the mapping relationship between the parallel joints and corresponding equivalent series joints,a forward kinematics analysis method and two inverse kinematics analysis methods of hybrid mechanisms are examined.A case study is performed to verify the calculated matrices wherein a humanoid hybrid robotic arm with a parallel-series-parallel configuration is considered as an example.The results of a simulation experiment indicate that the obtained formulas are exact and the proposed method for kinematics analysis of hybrid mechanisms is practically feasible.
文摘This paper presents a novel one-axis linear-drive control system, in which wire rope is wound orderly around drum by servo motor drive and drays the working slider for a long linear reciprocating motion. PKM with this control system is metamorphic and can achieve great feed forces, accelerations and transverse speeds, high accuracy and low cost. The metamorphic characteristics are studied, including the metamorphic condition, con- tents, process as well as procedures. The kinematics computation model is established and analyzed.
文摘Achieving optimal alignment in total knee arthroplasty(TKA) is a critical factor in ensuring optimal outcomes and long-term implant survival. Traditionally, mechanical alignment has been favored to achieve neutral postoperative joint alignment. However, contemporary approaches, such as kinematic alignments and hybrid techniques including adjusted mechanical, restricted kinematic, inverse kinematic, and functional alignments, are gaining attention for their ability to restore native joint kinematics and anatomical alignment, potentially leading to enhanced functional outcomes and greater patient satisfaction. The ongoing debate on optimal alignment strategies considers the following factors: long-term implant durability, functional improvement, and resolution of individual anatomical variations. Furthermore, advancements of computer-navigated and robotic-assisted surgery have augmented the precision in implant positioning and objective measurements of soft tissue balance. Despite ongoing debates on balancing implant longevity and functional outcomes, there is an increasing advocacy for personalized alignment strategies that are tailored to individual anatomical variations. This review evaluates the spectrum of various alignment techniques in TKA, including mechanical alignment, patient-specific kinematic approaches, and emerging hybrid methods. Each technique is scrutinized based on its fundamental principles, procedural techniques, inherent advantages, and potential limitations, while identifying significant clinical gaps that underscore the need for further investigation.
基金This work was supported by Fundamental Research Funds for the Central Universities(No.2018JBZ007).
文摘In order to satisfy the requirements of large workspace and high dexterity for processing equipment of oversized cylindrical boxes′spherical crown surfaces in the aerospace industry,a novel serial-parallel hybrid processing robot mechanism is proposed.The degrees of freedom of the 5PUS-(2UR)PU parallel mechanism are obtained by using the screw theory.The inverse kinematics of the hybrid mechanism are analyzed and the velocity Jacobian matrix is established.Then,the constraints of the main factors influencing workspace of the mechanism are given,and the position and posture workspace are obtained.Next,the dexterity and stiffness performance of the mechanism is analyzed based on the Jacobian matrix.The virtual prototype is established,and the theoretical calculation and simulation analysis of the hybrid mechanism with arc curve as the processing trajectory are carried out by using Matlab and Adams software.The research results show that the mechanism can satisfy the requirements of large workspace and high dexterity of oversized cylindrical boxes′spherical crown surface processing,and has feasibility and practical application value.
