ANALYSIS SOLUTION OF BULGING CONVEXITY OF THE HYDRAULIC ELASTIC BULGING ROLL

The hydraulic elastic bulging roll system is a new roll system being developed in recent years.It is the first time in home that dead load test and study on this system has been made.Based on the experiment,the analysis solution of the bulging convexity of the hydraulic elastic bulging roll was obtained by selecting appropriate displacement function and adopting inverse solution of the elasticity theory.In evaluating,a variable displacement function and its solving method was advanced.The analysis results are in accord with the experiment's.Some conclusions have laid the foundation of establishing close-loop controlled mathematical model of the hydraulic elastic bulging roll system.

Seismic reliability analysis of urban water distribution network

An approach to analyze the seismic reliability of water distribution networks by combining a hydraulic analysis with a first-order reliability method （FORM）, is proposed in this paper. The hydraulic analysis method for normal conditions is modified to accommodate the special conditions necessary to perform a seismic hydraulic analysis. In order to calculate the leakage area and leaking flow of the pipelines in the hydraulic analysis method, a new leakage model established from the seismic response analysis of buried pipelines is presented. To validate the proposed approach, a network with 17 nodes and 24 pipelines is investigated in detail. The approach is also applied to an actual project consisting of 463 nodes and 767 pipelines. The results show that the proposed approach achieves satisfactory results in analyzing the seismic reliability of large-scale water distribution networks.

Thermal hydraulic characteristics of helical coil once-through steam generator under ocean conditions

Owing to its advantages of high heat transfer efficiency and compactness, the helical coil once-through steam generator(HCOTSG) can be used in floating nuclear power plants and has been widely used in the design of small modular reactors. The helical tubular geometric structure of the HCOTSG allows heat transfer and local flow changes to occur under complex ocean conditions. In this study, theoretical models of ocean conditions are added to the RELAP5/MOD3.3 code and verified. Using the modified RELAP5 code, the thermal–hydraulic characteristics of the HCOTSG under ocean conditions are simulated. The results show that under rolling conditions, the flow oscillation amplitudes of the single liquid-phase, twophase flow, and single gas-phase regions are different. A circular change in the horizontal position of the helical tube causes the fluctuation of the parameters to change periodically. A phase difference of approximately 3.9 s at a flow rate of 23 kg/s is observed in the flow fluctuation along the axial direction. The driving force, period, and amplitude of rolling significantly affect the flow fluctuation in the HCOTSG. In natural circulation, the flow in the HCOTSG is complex, and the primary-side flow fluctuation can reduce the trough of the flow oscillation at the helical tube by approximately 24.3%.

Numerical and Experimental Analysis of A Vertical-Axis Eccentric-disc Variable-Pitch Turbine(VEVT)

A combined experimental and numerical investigation is carried out to study the performance of a vertical-axis eccentric-disc variable-pitch turbine(VEVT).A scheme of eccentric disc pitch control mechanism based on doubleblock mechanism is proposed.The eccentric control mechanism and the deflection angle control mechanism in the pitch control structure are designed and optimized according to the functional requirements of the turbine,and the three-dimensional model of the turbine is established.Kinematics analysis of the eccentric disc pitch control mechanism is carried out.Kinematics parameters and kinematics equations which can characterize its motion characteristics are derived.Kinematics analysis and simulation are carried out,and the motion law of the corresponding mechanical system is obtained.By analyzing the force and motion of blade of VEVT,the expressions of the important parameters such as deflection angle,attack angle and energy utilization coefficient are obtained.The lateral induced velocity coefficient is acquired by momentum theorem,the hydrodynamic parameters such as energy utilization coefficient are derived,and the hydrodynamic characteristics of VEVT are also obtained.The experimental results show that the turbine has good energy capture capability at different inflow velocities of different sizes and directions,which verifies that VEVT has good self-startup performance and high energy capture efficiency.

Preliminary Design and Analysis of ITER In-Wall Shielding

ITER in-wall shielding （IIS） is situated between the doubled shells of the ITER Vacuum Vessel （IVV）. Its main functions are applied in shielding neutron, gamma-ray and toroidal field ripple reduction. The structure of IIS has been modelled according to the IVV design criteria which has been updated by the ITER team （IT）. Static analysis and thermal expansion analysis were performed for the structure. Thermal-hydraulic analysis verified the heat removal capability and resulting temperature, pressure, and velocity changes in the coolant flow. Consequently, our design work is possibly suitable as a reference for IT＇s updated or final design in its next step.

Functionality analysis of an urban water supply network after strong earthquakes

An urban water supply network(WSN)is a crucial lifeline system that helps to maintain the normal functioning of modern society.However,the hydraulic analysis of a significantly damaged WSN that suffers from pipe breaks or leaks remains challenging.In this paper,a probability-based framework is proposed to assess the functionality of WSNs in the aftermath of powerful earthquakes.The serviceability of the WSN is quantified by using a comprehensive index that considers nodal water flow and nodal pressure.This index includes a coefficient that reflects the relative importance of these two parameters.The demand reduction(DR)method,which reduces the water flow of nodes while preventing the negative pressure of nodes,is proposed.The difference between the negative pressure elimination(NPE)method and the DR method is discussed by using the example of a WSN in a medium-sized city in China.The functionality values of the WSN are 0.76 and 0.99 when nodal pressure and nodal demands are used respectively as the index of system serviceability at an intensity level that would pertain to an earthquake considered to occur at a maximum level.When the intensity of ground motion is as high as 0.4 g,the DR method requires fewer samples than the NPE method to obtain accurate results.The NPE method eliminates most of the pipes,which may be unrealistic.

Effectiveness of Several Metaheuristic Methods to Analyze Hydraulic Parameters in a Drinking Water Distribution Network

The reliability and ease of applying metaheuristic methods in solving large and complex equation systems make it interesting to be applied as an alternative solution to solving problems in various fields. This article proves the effectiveness of an optimization model based on the metaheuristic method for the analysis of hydraulic parameters of drinking water distribution pipes. The metaheuristic methods explored are Differential Evolution (DE) algorithm, Particle Swam Optimization (PSO) algorithm and CODEQ algorithm. The effectiveness of the three methods is measured relative by comparing the results of the analysis of the three models with the results from Newton Raphson method and Monte Carlo simulation method. The analysis shows that the optimization model based on the DE, PSO and CODEQ algorithms is very effective for solving problems on a simple network that has 6 pipe elements and 5 service nodes. The results obtained have a level of accuracy as good as Newton Raphson method. In the case of complex networks that have 32 pipe elements and 21 service nodes, there is an indication of performance degradation which is indicated by a decrease in fitness value. In this case, Newton Raphson method still shows its consistency. The optimization model based on the metaheuristic method is still far more effective than the Monte Carlo simulation method, although it is not as effective as Newton Raphson method. The Monte Carlo simulation method is not recommended for hydraulic pipe network analysis, even for simple networks.

On the feasibility of re-stimulation of shale wells

As a result of advances in horizontal comple- tions and multi-stage hydraulic fracturing, the U.S. has been able to economically develop several decades of worth of natural gas. However, a considerable concern has risen on the economic viability of shale gas development for reasons associated with the fast production declines as well as recent down-turns of natural gas prices besides rises in the costs of new technologies. Therefore, an economic analysis is required to investigate the profitability of the re- fracturing treatment of unconventional gas resources. Net present value of cash flows and internal rate of return are calculated for a range of gas prices considering 20 years of natural gas production from a typical unconventional shale gas reservoir. A systematic comparison is then accom- plished for three scenarios： （1） re-fracturing versus no re- fracturing, （2） combination of re-fracturing and drilling new wells, and （3） time-dependent re-fracturing treatment. Further, this paper incorporates the cost of re-fracturing treatment, the cost of drilling a new horizontal well, the water treatment cost, as well as the current and future price of natural gas in the model. The findings of this work would help the future re-stimulation development plans of the emerging unconventional shale gas plays.

Approximate-model Based Estimation Method for Dynamic Response of Forging Processes

Many high-quality forging productions require the large-sized hydraulic press machine（HPM） to have a desirable dynamic response. Since the forging process is complex under the low velocity, its response is difficult to estimate. And this often causes the desirable low-velocity forging condition difficult to obtain. So far little work has been found to estimate the dynamic response of the forging process under low velocity. In this paper, an approximate-model based estimation method is proposed to estimate the dynamic response of the forging process under low velocity. First, an approximate model is developed to represent the forging process of this complex HPM around the low-velocity working point. Under guaranteeing the modeling performance, the model may greatly ease the complexity of the subsequent estimation of the dynamic response because it has a good linear structure. On this basis, the dynamic response is estimated and the conditions for stability, vibration, and creep are derived according to the solution of the velocity. All these analytical results are further verified by both simulations and experiment. In the simulation verification for modeling, the original movement model and the derived approximate model always have the same dynamic responses with very small approximate error. The simulations and experiment finally demonstrate and test the effectiveness of the derived conditions for stability, vibration, and creep, and these conditions will benefit both the prediction of the dynamic response of the forging process and the design of the controller for the high-quality forging. The proposed method is an effective solution to achieve the desirable low-velocity forging condition.

Design optimization of first wall and breeder unit module size for the Indian HCCB blanket module

The Indian test blanket module（TBM） program in ITER is one of the major steps in the Indian fusion reactor program for carrying out the R＆D activities in the critical areas like design of tritium breeding blankets relevant to future Indian fusion devices（ITER relevant and DEMO）.The Indian Lead–Lithium Cooled Ceramic Breeder（LLCB） blanket concept is one of the Indian DEMO relevant TBM,to be tested in ITER as a part of the TBM program.Helium-Cooled Ceramic Breeder（HCCB） is an alternative blanket concept that consists of lithium titanate（Li_2TiO_3） as ceramic breeder（CB） material in the form of packed pebble beds and beryllium as the neutron multiplier.Specifically,attentions are given to the optimization of first wall coolant channel design and size of breeder unit module considering coolant pressure and thermal loads for the proposed Indian HCCB blanket based on ITER relevant TBM and loading conditions.These analyses will help proceeding further in designing blankets for loads relevant to the future fusion device.

Difficulties and measures of driving super long piles in Bohai Gulf

Long piles of the ocean oil platform are usually manufactured as the integration of several segments, which have to be assembled one by one during installation. During pile driving, excessive pore pressure will build up in such a high level that hydraulic fracturing in the soil round the pile may take place, which will cause the soil to consolidate much faster during pile extension period. Consequently, after pile extension, the soil strength will recover to some extent and the driving resistance will increase considerably, which makes restarting driving the pile very difficult and even causes refusal. A finite element （FE） analysis procedure is presented for judging the risk of refusal by estimating the blow counts after pile extension, in which the regain of soil strength is considered. A case analysis in Bohai Gulf is performed using the proposed orocedure to exolain the nile refusal phenomenon.

Influence evaluation of loading conditions during pressurized thermal shock transients based on thermal-hydraulics and structural analyses

The thermal hydraulic （TH） behavior of coo- lant water is a key factor in the structural integrity assessments on reactor pressure vessels （RPVs） of pressurized water reactors （PWRs） under pressurized thermal shock （PTS） events, because the TH behavior may affect the loading conditions in the assessment. From the viewpoint of TH behavior, configuration of plant equipment and their dimensions, and operator action time considerably influence various parameters, such as the temperature and flow rate of coolant water and inner pressure. In this study, to investigate the influence of the operator action time on TH behavior during a PTS event, we developed an analysis model for a typical Japanese PWR plant, including the RPV and the main components of both primary and secondary systems, and performed TH analyses by using a system analysis code called RELAP5. We applied two different operator action times based on the Japanese and the United States （US） rules： Operators may act after 10 min （Japanese rules） and 30 min （the US rules） after the occurrence of PTS events. Based on the results of TH analysis with different operator action times, we also performed structural analyses for evaluating thermal-stress distributions in the RPV during PTS events as loading conditions in the structural integrity assessment. From the analysis results, it was clarified that differences in operator action times significantly affect TH behavior and loading conditions, as the Japanese rule may lead to lower stresses than that under the US rule because an earlier operator action caused lower pressure in the RPV.