Backstepping Sliding Mode Control Based on Extended State Observer for Hydraulic Servo System

Hydraulic servo system plays an important role in industrial fields due to the advantages of high response,small size-to-power ratio and large driving force.However,inherent nonlinear behaviors and modeling uncertainties are the main obstacles for hydraulic servo system to achieve high tracking perfor-mance.To deal with these difficulties,this paper presents a backstepping sliding mode controller to improve the dynamic tracking performance and anti-interfer-ence ability.For this purpose,the nonlinear dynamic model is firstly established,where the nonlinear behaviors and modeling uncertainties are lumped as one term.Then,the extended state observer is introduced to estimate the lumped distur-bance.The system stability is proved by using the Lyapunov stability theorem.Finally,comparative simulation and experimental are conducted on a hydraulic servo system platform to verify the efficiency of the proposed control scheme.

Model-based nonlinear control of hydraulic servo systems： Challenges, developments and perspectives

Hydraulic servo system plays a significant role in industries, and usually acts as a core point in control and power transmission. Although linear theory-based control methods have been well established, advanced controller design methods for hydraulic servo system to achieve high performance is still an unending pursuit along with the development of modem industry. Essential nonlinearity is a unique feature and makes model-based nonlinear control more attractive, due to benefit from prior knowledge of the servo valve controlled hydraulic system. In this paper, a discussion for challenges in model-based nonlinear con- trol, latest developments hydraulic servo systems are and brief perspectives of presented： Modelling uncer- tainty in hydraulic system is a major challenge, which includes parametric uncertainty and time-varying distur- bance; some specific requirements also arise ad hoc difficulties such as nonlinear friction during low velocity tracking, severe disturbance, periodic disturbance, etc.; to handle various challenges, nonlinear solutions including parameter adaptation, nonlinear robust control, state and disturbance observation, backstepping design and so on, are proposed and integrated, theoretical analysis and lots of applications reveal their powerful capability to solve pertinent problems; and at the end, some perspectives and associated research topics （measurement noise, constraints, inner valve dynamics, input nonlinearity, etc.） in nonlinear hydraulic servo control are briefly explored and discussed.

Output feedback control and parameters influence analysis of active suspension electro-hydraulic servo actuator

The hydraulic servo actuator of heavy vehicle active suspension is investigated to clarify the correlation between system parameters and the control characteristics of active suspension hydraulic servo system.Accordingly, a nonlinear physical model of electro-hydraulic servo active suspension system is built.Compared with the conventional nonlinear modeling, the model in this study considers the asymmetry of working areas caused by single rod hydraulic cylinder in the suspension system.In accordance with the model, a nonlinear output feedback controller based on backstepping is designed, and the effectiveness of the controller is proved based on the experimental platform.The dynamic response curve of the electro-hydraulic servo control system under the change of parameters is generated based on the simulation model.The sensitivity of electro-hydraulic servo control performance to the change of system physical parameters is investigated, and two evaluation indexes are proposed to quantify and compare the effect of all physical parameter changes on position control system.As revealed by the results, the position control characteristics of suspension actuator are more sensitive to the changes of flow gain of the servo valve, system supply oil pressure and effective working areas of cylinder, and the two evaluation indexes are over 10 times higher than other physical parameters.

DERIVATION AND INTEGRAL SLIDING MODE VARIABLE STRUCTURE CONTROL OF HYDRAULIC VELOCITY TRACKING SYSTEM

The velocity tracking control of a hydraulic servo system is studied. Sincethe dynamics of the system are highly nonlinear and have large extent of model uncertainties, suchas big changes in load and parameters, a derivation and integral sliding mode variable structurecontrol scheme (DI-SVSC) is proposed. An integral controller is introduced to avoid the assumptionthat the derivative of desired signal must be known in conventional sliding mode variable structurecontrol, a nonlinear derivation controller is used to weaken the chattering of system. The designmethod of switching function in integral sliding mode control, nonlinear derivation coefficient andcontrollers of DI-SVSC is presented respectively. Simulation shows that the control approach is ofnice robustness and improves velocity tracking accuracy considerably.

Co-Simulation Research of the Mechanical-Hydraulic-Control Coupling System of ITER Tractor

The virtual prototyping models of the mechanical, hydraulic and control system of the ITER tractor were built with CATIA, ADAMS and MATLAB/Simulink respectively according to its heavy load and high precision characteristics, and the data transfer between the different models was accomplished by the integration interface between different software. Consequently the virtual experimental platform for the multi-disciplinary co-simulation was established. A co-simulation study of the mechanical-hydraulic-control coupling system of the ITER tractor was carried out. The synchronization servo control of parallel hydraulic cylinders was implemented, and the tracking control of the preconcerted trajectory of the hydraulic cylinders was realized on the established experimental platform. This paper presents the optimization design and technology rebuilding for the complicated coupling system with its theoretic foundation and co-simulation virtual experimental platform.

Hydraulic Self Servo Swing Cylinder Structure Optimization and Dynamic Characteristics Analysis Based on Genetic Algorithm

The dynamic characteristics of hydraulic self servo swing cylinder were analyzed according to the hydraulic system natural frequency formula. Based on that,a method of the hydraulic self servo swing cylinder structure optimization based on genetic algorithm was proposed in this paper. By analyzing the four parameters that affect the dynamic characteristics, we had to optimize the structure to obtain as larger the Dm( displacement) as possible under the condition with the purpose of improving the dynamic characteristics of hydraulic self servo swing cylinder. So three state equations were established in this paper. The paper analyzed the effect of the four parameters in hydraulic self servo swing cylinder natural frequency equation and used the genetic algorithm to obtain the optimal solution of structure parameters. The model was simulated by substituting the parameters and initial value to the simulink model. Simulation results show that: using self servo hydraulic swing cylinder natural frequency equation to study its dynamic response characteristics is very effective.Compared with no optimization,the overall system dynamic response speed is significantly improved.

Study on Oil Cavity Number of Hydrostatic Guide Sleeve of Electro-hydraulic Servo Cylinder

The electro-hydraulic servo drive hydraulic cylinder has many unique advantages, such as fast response, high load stiffness, high control power, strong anti-eccentric load ability and so on, so it has been widely used in industrial control. Based on the guide sleeve of hydrostatic seal of hydraulic cylinder, the reasonable number of oil chamber of guide sleeve is studied in this paper. ICEM CFD software and FLUENT simulation software are used to calculate and analyze the number of different oil chambers of guide sleeve of hydrostatic seal. The temperature field of piston rod with different moving speed, different initial pressure of oil chamber and oil film under different number of oil chambers is analyzed. The relationship between the pressure field and temperature field provides a better basis for optimizing the design of hydrostatic guide sleeve and helps to improve the servo drive cylinder.

Compound Impedance Control of a Hydraulic Driven Parallel 3UPS/S Manipulator

The hydraulic parallel manipulator combines the high-power density of the hydraulic system and high rigidity of the parallel mechanism with excellent load-carrying capacity.However,the high-precision trajectory tracking control of the hydraulic parallel manipulator is challenged by the coupling dynamics of the parallel mechanism and the high nonlinearities of the hydraulic system.In this study,the trajectory control of a 3-DOF symmetric spherical parallel 3UPS/S manipulator is evaluated.Focusing on the highly coupling and nonlinear system dynamics,a compound impedance control method for a hydraulic driven parallel manipulator is proposed,which combines impedance control with the spatial motion characteristics of a parallel manipulator.The control strategy is divided into the inner and outer loops.The inner loop controls the impedance of the actuator in the joint space,and the outer loop controls the impedance of the entire platform in the task space to compensate the coupling of the actuators and improve the tracking accuracy of the moving platform.Compound impedance control does not require force or pressure sensors and is less dependent on modeling precision.The experimental results show that the compound impedance control effectively improves the tracking accuracy of the moving platform.This research proposes a compound impedance control strategy for a 3-DOF hydraulic parallel manipulator,which has high tracking precision with a simple and cheap system configuration.

THE DESIGN OF DYNAMIC SIMULATION SYSTEM ON EARTHQUAKE SURROUNDINGS

Objective To design a system that can simulate earthquake surroundings. In the surroundings, people can be familiar with the omen, strong shock and aftershock of earthquake, thus make right choices and get away when the disaster occurs. Methods The system consists of an electro hydraulic servo system, a whole information sound system and some lighting device; By using the adaptive inverse control method and LMS algorithms, the inverse model (i.e. the controller) is convergent rapidly; The software based on LabVIEW makes the parameters can be modified easily; There is a double closed loop structure in the system: an analog closed loop and a digital closed loop, and their parameters can be inspected in real time. Results The system is of very high reliability, and the desired vibration signal can be tracked exactly by output. Conclusion Earthquake surroundings is simulated vividly. Through the system, people can be familiar with earthquake phenomena, and know lots of knowledge of earthquake.

A seventh-order model for dynamic response of an electro-hydraulic servo valve

In this paper, taking two degrees of freedom on the armature–flapper assembly into account, a seventh-order model is deduced and proposed for the dynamic response of a two-stage electro-hydraulic servo valve from nonlinear equations. These deductions are based on fundamental laws of electromagnetism, fluid, and general mechanics. The coefficients of the proposed seventhorder model are derived in terms of servo valve physical parameters and fluid properties explicitly.For validating the results of the proposed model, an AMESim simulation model based on physical laws and the existing low-order models validated by other researchers through experiments are used to compare with the seventh-order model. The results show that the seventh-order model can reflect the physical behavior of the servo valve more explicitly than the existing low-order models and it could provide guidance more easily for a linear control design approach and sensitivity analysis than the AMESim simulation model.

Matching design of hydraulic load simulator with aerocraft actuator

This paper intends to provide theoretical basis for matching design of hydraulic load simulator （HLS） with aerocraft actuator in hardware-in-loop test, which is expected to help actuator designers overcome the obstacles in putting forward appropriate requirements of HLS. Traditional research overemphasizes the optimization of parameters and methods for HLS controllers. It lacks deliberation because experimental results and project experiences indicate different ultimate performance of a specific HLS. When the actuator paired with this HLS is replaced, the dynamic response and tracing precision of this HLS also change, and sometimes the whole system goes so far as to lose control. Based on the influence analysis of the preceding phenomena, a theory about matching design of aerocraft actuator with HLS is presented, together with two paired new concepts of ＂Standard Actuator＂ and ＂Standard HLS＂. Further research leads to seven important conclusions of matching design, which suggest that appropriate stiffness and output torque of HLS should be carefully designed and chosen for an actuator. Simulation results strongly support that the proposed principle of matching design can be anticipated to be one of the design criteria for HLS, and successfully used to explain experimental phenomena and project experiences.