Multifunctional MXene/Carbon Nanotube Janus Film for Electromagnetic Shielding and Infrared Shielding/Detection in Harsh Environments

Multifunctional,flexible,and robust thin films capable of operating in demanding harsh temperature environments are crucial for various cutting-edge applications.This study presents a multifunctional Janus film integrating highly-crystalline Ti_(3)C_(2)T_(x) MXene and mechanically-robust carbon nanotube(CNT)film through strong hydrogen bonding.The hybrid film not only exhibits high electrical conductivity(4250 S cm^(-1)),but also demonstrates robust mechanical strength and durability in both extremely low and high temperature environments,showing exceptional resistance to thermal shock.This hybrid Janus film of 15μm thickness reveals remarkable multifunctionality,including efficient electromagnetic shielding effectiveness of 72 dB in X band frequency range,excellent infrared(IR)shielding capability with an average emissivity of 0.09(a minimal value of 0.02),superior thermal camouflage performance over a wide temperature range(−1 to 300℃)achieving a notable reduction in the radiated temperature by 243℃ against a background temperature of 300℃,and outstanding IR detection capability characterized by a 44%increase in resistance when exposed to 250 W IR radiation.This multifunctional MXene/CNT Janus film offers a feasible solution for electromagnetic shielding and IR shielding/detection under challenging conditions.

A Glassy Carbon Electrode Modified with Cellulose Nanofibrils from Ammophila arenaria for the Sensitive Detection of L-Trytophan

L-tryptophan is an essential amino acid for human health. Nanofibrillated cellulose (NFC) from marram grass (Ammophila arenaria) extracted from plants harvested in the center of Tunisia was used for the first time for the modification of a glassy carbon electrode (GCE), for the sensitive detection of L-tryptophan (Trp). After spectroscopic and morphological characterization of the extracted NFC, the GC electrode modification was monitored through cyclic voltammetry. The NFC-modified electrode exhibited good analytical performance in detecting Trp with a wide linear range between 7.5 × 10−4 mM and 10−2 mM, a detection limit of 0.2 µM, and a high sensitivity of 140.0 µA∙mM−1. Additionally, the NFC/GCE showed a good reproducibility, good selectivity versus other amino acids, uric acid, ascorbic acid, and good applicability to the detection of Trp in urine samples.

Signal Detection of Carbon in Iron-Based Alloy by Double-Pulse Laser-Induced Breakdown Spectroscopy

Although single-pulse lasers are often used in traditional laser-induced breakdown spectroscopy （LIBS） measurements, their measurement outcomes are generally undesirable because of the low sensitivity of carbon in iron-based alloys. In this article, a double-pulse laser was applied to improve the signal intensity of carbon. Both the inter-pulse delay and the combination of laser wavelengths in double-pulse laser-induced breakdown spectroscopy （DP-LIBS） were optimized in our experiment. At the optimized inter-pulse delay, the combination of a first laser of 532 nm and a second laser of 1,064 nm achieved the highest signal enhancement. The properties of the target also played a role in determining the mass ablation enhancement in DP-LIBS configuration.

Carbon dots derived from Poria cocos polysaccharide as an effective“on-off”fluorescence sensor for chromium(Ⅵ)detection

Chromium is a harmful contaminant showing mutagenicity and carcinogenicity.Therefore,detection of chromium requires the development of low-cost and high-sensitivity sensors.Herein,blue-fluorescent carbon quantum dots were synthesized by one-step hydrothermal method from alkali-soluble Poria cocos polysaccharide,which is green source,cheap and easy to obtain,and has no pharmacological activity due to low water solubility.These carbon quantum dots exhibit good fluorescence stability,water solubility,anti-interference and low cytotoxicity,and can be specifically combined with the detection of Cr(Ⅵ)to form a non-fluorescent complex that causes fluorescence quenching,so they can be used as a label-free nanosensor.High-sensitivity detection of Cr(Ⅵ)was achieved through internal filtering and static quenching effects.The fluorescence quenching degree of carbon dots fluorescent probe showed a good linear relationship with Cr(Ⅵ)concentration in the range of 1-100μM.The linear equation was F;/F=0.9942+0.01472[Cr(Ⅵ)](R;=0.9922),and the detection limit can be as low as 0.25μM(S/N=3),which has been successfully applied to Cr(Ⅵ)detection in actual water samples herein.

Mercury(Ⅱ) detection by water-soluble photoluminescent ultra-small carbon dots synthesized from cherry tomatoes

Mercury ions have been considered highly toxic to human health. What would be great is to develop the ionic probes without any toxicities themselves. Here, we report a friendly, highly sensitive mercury(II) ionic probe, watersoluble photoluminescence carbon dots which were synthesized by simply hydrothermal treatment of fresh cherry tomatoes without adding any other reagents. The ultra-small(\1 nm) carbon dots show robust excitation-depended photoluminescence under a wide p H range(4–10) or a strong ionic strength of up to 1 M, and the detection limit of mercury(II) has been determined as low as 18 n M. We envision such water-soluble, biocompatible carbon dots that could be applied to biolabeling, bio-imaging, and biosensing fields.

Plasma Activation of Integrated Carbon Nanotube Electrodes for Electrochemical Detection of Catechol

In this study, integrated multi-wall carbon nanotube （MWCNT） electrodes were prepared in the holes of glass directly by microwave plasma chemical vapour deposition （MWPCVD）. The electrochemical behaviour of catechol at the integrated MWCNT electrodes was investigated. The oxygen plasma treated CNT electrodes had better electrochemical performance for the analysis of catechol than that of as-synthesized CNT electrodes. Both the as-synthesized CNTs and plasma treated CNTs were characterized by TEM（transmission electron microscopy, XPS（X-ray photoelectron spectroscopy） and Raman spectroscopy. The results revealed that the oxygen plasma activation is an effective method to enhance the electrochemical properties of CNT electrodes.

A Functionalized Multi-walled Carbon Nanotube and Gold Nanoparticle Composite-modified Glassy Carbon Electrode for the Detection of Enterovirus 71

Hand, foot, and mouth disease (HFMD) is a common infectious disease in children, occurring primarily in preschool children[1_3] with infants under three years old being gen erally susceptible. The disease is caused by various enteroviruses, among which EV71 and Coxsackievirus A group 16 (Cox A16) are the most comm on ⑷.According to in formation released by the Chinese Center for Disease Control and Prevention on June 8, 2016, EV71 infection- related HFMD has been prevalent among infants and young children in China since 2007, with a high incidenee and many deaths.

Synthesis of fluorescent calcium phosphate/carbon dot hybrid composites for detection of copper ions and cell imaging

As a new form of fluorescent carbon nanomaterials, carbon dots （CDs） have many advantages such as simplicity of synthesis, low biological toxicity, resistance to photobleaching, excellent in biocompatibility and easy to modify. As the most inorganic mineral of human hard tissues including bone and tooth, calcium phosphate （CaP） materials have high biocompatibility and good biodegradability. The hydroxyapatite （HA）, a common type of calcium phosphate, has been widely used in drug delivery, removal of heavy metal ions, gene transfection and other biomedical fields. Herein, a novel method for preparation of fluorescent calcium phosphate/carbon dot （ CaP/ CD） hybrid composites was described. We first prepared CDs with a quantum yield of 51.5 % by carbonization of citric acid with polyethylenimine （PEI） in one step. Next, the fluorescent CaP/CD hybrid composites upon UV ex- citation were obtained in the presence of carboxymethyl cellulose （CMC） as a template and CD as a co-template. The as-prepared CaP/CD hybrid composites consisted of irregularly shaped nanorods with a length of 50 - 140 nm and a diameter of 10- 25 nm were characterized by transmitted electron microscopy （TEM）. And the highly mag- nified TEM image of CaP/CD hybrid composites showed that tens of CDs in shape of nanodot indeed existed in the CaP/CD hybrid composites. More importantly, CDs enabled the CaP/CD hybrid composites to emit bright blue flu- orescence under UV irradiation. In addition, the result of X-ray powder diffraction （XRD） patterns indicated that the crystalline phase of CaP/CD hybrid composites were in good agreement with those of hexagonal HA （JCPDS Da- ta Card 09-0432）. Moreover, it was found that the as-synthesized CaP/CD hybrid composites were potentially use- ful in detecting the concentration of Cu2＋ and imaging the cell with nontoxic as potential fluorescent probes.

SBA-15 Modified Carbon Paste Electrode for Rapid cTnI Detection with Enhanced Sensitivity

A novel electrochemical immunoassay for cardiac troponin Ⅰ （cTnI） combining the concepts of the dual monoclonal antibody ＂sandwich＂ principle, the silver enhancement on the nano-gold particle, and the SBA-15 mesoporous modified carbon paste electrode （SBA-MCPE） is described. Four main steps were carried out to obtain the analytical signal, i.e., electrode preparation, immunoreaction, silver enhancement, and anodic stripping voltammetric detection. A linear relationship between the anodic stripping peak current and concentration of cTnI from 0.5 to 5.0 ng/mL and a limit of detection of 0.2 ng/mL of cTnI were obtained.

Preparation of Nitrogen-doped Carbon Dots from Coke Powder as a Fluorescent Chemosensor for Selective and Sensitive Detection of Cr (Ⅵ)

The nitrogen-doped carbon dots(N-CDs)were prepared by using coke powder as carbon source and one-step hydrothermal method.The N-CDs were studied as a fluorescent chemosensor for determining Cr(Ⅵ)in water.The selective,sensitive,reproducibility and stability of as-prepared N-CDs were investigated.The morphology,composition and properties of N-CDs were characterized by a series of methods.The fluorescence quenching of N-CDs by Cr(Ⅵ)was explored.The experimental results reveal that the obtained N-CDs have great hydrophilicity and strong luminescence properties,which demonstrates the successful doping of nitrogen into the CDs.The surface-active groups and emission wavelength range of CDs increase due to the electronegativity and electron donor effect of doping N atom.Furthermore,the N-CDs exhibit good photochemical properties for the detection of Cr(Ⅵ),including a wide linear range from 0.3 to 200μM(R^(2)=0.9935)and a low detection limit of 0.10μM at the signal-to-noise ratio of 3(S/N=3).Moreover,the N-CDs as a sensor was used successfully for Cr(Ⅵ)detection in real water samples with recovery rates of 99.9%-110.6%.This sensor also shows highly reproducibility and stability.The N-CDs fluorescent chemical sensor may be a potential candidate for applying in the field of other fluorescent chemical sensing,catalysis,photoelectric devices and other fields.

Synthesis of Carbon dots from Biomass Chenpi for the Detection of Hg^(2+)

Biomass-derived carbon dots(C-dots)are considered a very important carbon material in metal ion detection of their small environmental impact,simple preparation process,and relatively low cost.A green approach for synthesizing biomass-derived C-dots from Chenpi using a hydrothermal method without further processing is proposed in the present study.The as-synthesized C-dots show excellent fluorescence properties,superior resistance to UV irradiation photobleaching,and high photostability in salt-containing solutions.The C-dots were used in the form of label-free fluorescent probes for sensitively detecting Hg^(2+)selectively.The outcome relationship behaved linearly and was established based on a given range between 10–300 nM concentration,with a detection limit of 7.0 nM.This green strategy obtains a high C-dot quantum yield of 10.8%and satisfactory results in detecting Hg^(2+)in actual water samples.

High-sensitivity phase imaging eddy current magneto-optical system for carbon fiber reinforced polymers detection

This paper proposed a high-sensitivity phase imaging eddy current magneto-optical (PI-ECMO) system for carbon fiber reinforced polymer (CFRP) defect detection. In contrast to other eddy current-based detection systems, the proposed system employs a fixed position excitation coil while enabling the detection point to move within the detection region. This configuration effectively mitigates the interference caused by the lift-off effect, which is commonly observed in systems with moving excitation coils. Correspondingly, the relationship between the defect characteristics (orientation and position) and the surface vertical magnetic field distribution (amplitude and phase) is studied in detail by theoretical analysis and numerical simulations. Experiments conducted on woven CFRP plates demonstrate that the designed PI-ECMO system is capable of effectively detecting both surface and internal cracks, as well as impact defects. The excitation current is significantly reduced compared with traditional eddy current magneto-optical (ECMO) systems.

Electrochemical Detection of Sudan I Using a Multi-Walled Carbon Nanotube/Chitosan Composite Modified Glassy Carbon Electrode

In this work, a simple and sensitive electrochemical method was developed to determine Sudan I by cyclic voltammetry and differential pulse voltammetry using a glassy carbon electrode modified with a chitosan/carbon nanotube composite. In cyclic voltammetry, Sudan I exhibited a well-defined oxidation peak located at 0.72 V at the multi-walled carbon nanotube (MWCNT)/chitosan-modified GCE. The determination conditions, including pH, scan rate, and chitosan: MWCNT mass ratio at the modified electrode, were optimized. Under the optimum experimental conditions, Sudan I could be linearly detected by differential pulse voltammetry with a detection limit of 3.0 × 10-8 mol?L-1.

Coal Based Carbon Dots for Fe^(3+) Detection and Photoelectric Catalysis

The carbon dots(CDs)could be applied in advanced field by using their sensitivity of the optical phenomenon.In this paper,the CDs in an average size of 3.75 nm was synthesized from coal by one-step solvothermal method,in which ethylenediamine was a reaction solvent and a nitrogen-containing precursor in the system.A blue-green fluorescence appeared under ultraviolet light.The strongest fluorescence emission was recorded at 480 nm under the excitation wavelength of 400 nm.The coal-based CDs could specifically recognize Fe^(3+)and the detection limit was 0.103μM.The coal-based CDs/TiO_(2) composite displayed an improved photoelectric response in 4 times comparing that of the TiO_(2) under the ultraviolet light with intensity of 10 mW cm_(-2).The photocatalytic activity over the degradation of organic molecules was accelerated as well.

Fluorescence Detection for H_2PO_4^- based on Carbon Dots/Fe^(3＋) Composite

A novel fluorescent probe for H_2PO_4^- was designed and fabricated based on the carbon dots/Fe^（3＋） composite. The carbon dots were synthesized by an established one-pot hydrothermal method and characterized by transmission electron microscope, X-ray diffractometer, UV-Vis absorption spectrometer and fluorescence spectrophotometer. The carbon dots/Fe^（3＋） composite was obtained by aqueous mixing of carbon dots and FeCl_3, and its fluorescence property was characterized by fluorescence spectrophotometer. The fluorescence of carbon dots was quenched by aqueous Fe^（3＋） cations, resulting in the low fluorescence intensity of the carbon dots/Fe^（3＋） composite. On the other hand, H_2PO_4^- reduced the concentration of Fe^（3＋） by chemical reaction and enhanced the fluorescence of the carbon dots/Fe^（3＋） composite. The Stern-Volmer equation was introduced to describe the relation between the relative fluorescence intensity of the carbon dots/Fe^（3＋） composite and the concentration of H_2PO_4^-, and a fine linearity（R2=0.997） was found in the range of H_2PO_4^- concentration of 0.4-12 m M.

Evaluating the Effect of Tillage on Carbon Sequestration Using the Minimum Detectable Difference Concept

Three long-term field trials in humid regions of Canada and the USA were used to evaluate the influence of soil depth and sample numbers on soil organic carbon (SOC) sequestration in no-tillage (NT) and moldboard plow (MP) corn (Zea mays L.) and soybean (Glycine max L.) production systems. The first trial was conducted on a Maryhill silt loam (Typic Hapludalf) at Elora, Ontario, Canada, the second on a Brookston clay loam (Typic Argiaquoll) at Woodslee, Ontario, Canada, and the third on a Thorp silt loam (Argiaquic Argialboll) at Urbana, Illinois, USA. No-tillage led to significantly higher SOC concentrations in the top 5 cm compared to MP at all 3 sites. However, NT resulted in significantly lower SOC in sub-surface soils as compared to MP at Woodslee (10-20 cm, P = 0.01) and Urbana (20-30 cm, P < 0.10). No-tillage had significantly more SOC storage than MP at the Elora site (3.3 Mg C ha-1) and at the Woodslee site (6.2 Mg C ha-1) on an equivalent mass basis (1350 Mg ha-1 soil equivalent mass). Similarly, NT had greater SOC storage than MP at the Urbana site (2.7 Mg C ha-1) on an equivalent mass basis of 675 Mg ha-1 soil. However, these differences disappeared when the entire plow layer was evaluated for both the Woodslee and Urbana sites as a result of the higher SOC concentrations in MP than in NT at depth. Using the minimum detectable difference technique, we observed that up to 1500 soil sample per tillage treatment comparison will have to be collected and analyzed for the Elora and Woodslee sites and over 40 soil samples per tillage treatment comparison for the Urbana to statistically separate significant differences in the SOC contents of sub-plow depth soils. Therefore, it is impracticable, and at the least prohibitively expensive, to detect tillage-induced differences in soil C beyond the plow layer in various soils.

Damage Detection for CFRP Based on Planar Electrical Capacitance Tomography

Due to the widespread use of carbon fiber reinforced polymer/plastic(CFRP),the nondestructive structural health monitoring for CFRP is playing an increasingly essential role.As a nonrad iative,noninvasive and nondestructive detection technique,planar electrical capacitance tomography(PECT)electrodes array is employed in this paper to reconstruct the damage image according to the calculated dielectric constant changes.The shape and duty ratio of PECT electro-des are optimized according to the relations between sensitivity distribution and the dielectric constant of different anisotropic degrees.The sensitivity matrix of optimized PECT sensor is more uniform as the result shows,because the sensitiv-ity of insensitivity area can be increased by adding rotation of optimized electro-des.The reconstructed image qualities due to different PECT arrays and different damage locations are investigated at last.The simulation results indicate that:PECT can be used to detect the surface damage of CFRP;the sensitivity matrix of PECT for CFRP is highly relevant with the degree of anisotropic dielectric con-stant;the rotatable PECT sensor with rotation has better performance in unifor-mity of sensitivity;for different damage locations,the rotatable sensor with rotation has better image quality in most cases.

Achieving Ultra-Low Detection Limit Using Nanofiber Labels for Rapid Disease Detection

Early diagnosis of diseases is critical in its effective management. Traditional disease detection methods require specialized equipment and trained personnel. With the introduction of rapid diagnostic test kits (RDTs), disease detection has become easier and faster. However, these RDTs have failed to compete with the specialized laboratory equipment due to their high detection limits and false alarm rates. This paper presents a novel method of using carbon nanofibers (CNFs) grown on glass microballoons (NMBs) to achieve ultra-low detection limits in RDTs. The NMBs have millions of nanosized CNFs grown on each microballoon, with each CNF having a strong bonding affinity for antibodies. The NMBs conjugated with secondary antibodies have therefore a significantly higher probability of capturing minute antigen concentrations in solution. Furthermore, the dark color formation at the capture zone makes visual disease detection possible. Human Immunoglobulin G (IgG) was selected as the model analyte to study the performance of NMBs using a sandwich immunoassay protocol. Ultra-low electrical detection limit of (4 pg/ml) and rapid re- sponse (~1 minute) was achieved using this method.

Smoldering charcoal detection in forest soil by multiple CO sensors

Cleaning up residual fires is an important part of forest fire management to avoid the loss of forest resources caused by the recurrence of a residual fire.Existing residual fire detection equipment is mainly infrared temperature detection and smoke identification.Due to the isolation of ground,temperature and smoke characteristics of medium and large smoldering charcoal in some forest soils are not obvious,making it difficult to identify by detection equipment.CO gas is an important detection index for indoor smoldering fire detection,and an important identification feature of hidden smoldering ground fires.However,there is no research on locating smoldering fires through CO detection.We studied the diffusion law of CO gas directly above covered smoldering charcoal as a criterion to design a detection device equipped with multiple CO sensors.According to the motion decomposition search algorithm,the detection device realizes the function of automatically searching for smoldering charcoal.Experimental data shows that the average CO concentration over the covered smoldering charcoal decreases exponentially with increasing height.The size of the search step is related to the reliability of the search algorithm.The detection success corresponding to the small step length is high but the search time is lengthy which can lead to search failure.The introduction of step and rotation factors in search algorithm improves the search efficiency.This study reveals that the average ground CO concentration directly above smoldering charcoal in forests changes with height.Based on this law,a CO gas sensor detection device for hidden smoldering fires has been designed,which enriches the technique of residual fire detection.