Quantitative prediction model for the depth limit of oil accumulation in the deep carbonate rocks:A case study of Lower Ordovician in Tazhong area of Tarim Basin

With continuous hydrocarbon exploration extending to deeper basins,the deepest industrial oil accumulation was discovered below 8,200 m,revealing a new exploration field.Hence,the extent to which oil exploration can be extended,and the prediction of the depth limit of oil accumulation(DLOA),are issues that have attracted significant attention in petroleum geology.Since it is difficult to characterize the evolution of the physical properties of the marine carbonate reservoir with burial depth,and the deepest drilling still cannot reach the DLOA.Hence,the DLOA cannot be predicted by directly establishing the relationship between the ratio of drilling to the dry layer and the depth.In this study,by establishing the relationships between the porosity and the depth and dry layer ratio of the carbonate reservoir,the relationships between the depth and dry layer ratio were obtained collectively.The depth corresponding to a dry layer ratio of 100%is the DLOA.Based on this,a quantitative prediction model for the DLOA was finally built.The results indicate that the porosity of the carbonate reservoir,Lower Ordovician in Tazhong area of Tarim Basin,tends to decrease with burial depth,and manifests as an overall low porosity reservoir in deep layer.The critical porosity of the DLOA was 1.8%,which is the critical geological condition corresponding to a 100%dry layer ratio encountered in the reservoir.The depth of the DLOA was 9,000 m.This study provides a new method for DLOA prediction that is beneficial for a deeper understanding of oil accumulation,and is of great importance for scientific guidance on deep oil drilling.

A hydrocarbon enrichment model and prediction of favorable accumulation areas in complicated superimposed basins in China

The geologic conditions of superimposed basins in China are very complicated. This is mainly shown by multi-phase structural evolution, multiple sets of source-reservoir-cap rock combinations, multiple stages of hydrocarbon generation and expulsion from source rocks, multi-cycle hydrocarbon enrichment and accumulation, and multi-phase reservoir adjustment and reconstruction. The enrichment, accumulation and distribution of hydrocarbon is mainly controlled by the source rock kitchen, paleo- anticline, regional cap rock and intensity of tectonic movement. In this paper, the T-BCMS model has been developed to predict favorable areas of hydrocarbon accumulation in complicated superimposed basins according to time and spatial relationships among five key factors. The five factors include unconformity surface representing tectonic balancing （B）, regional cap rock representing hydrocarbon protection （C）, paleo-anticline representing hydrocarbon migration and accumulation （M）, source rock kitchen representing hydrocarbon generation and expulsion （S） and geological time （T）. There are three necessary conditions to form favorable areas of hydrocarbon accumulation. First, four key factors BCMS should be strictly in the order of BCMS from top to bottom. Second, superimposition of four key factors BCMS in the same area is the most favorable for hydrocarbon accumulation. Third, vertically ordered combination and superimposition in the same area of BCMS should occur at the same geological time. The model has been used to predict the most favorable exploration areas in Ordovician in the Tarim Basin in the main hydrocarbon accumulation periods. The result shows that 95% of the discovered Ordovician hydrocarbon reservoirs are located in the predicted areas, which indicates the feasibility and reliability of the key factor matching T-BCMS model for hydrocarbon accumulation and enrichment.

Abdominal Fat Accumulation with Hyperuricemia and Hypercholesterolemia Quail Model Induced by High Fat Diet

Objective To establish abdominal fat accumulation with hyperuricemia and hypercholesterolemia quail model fed with high fat diet. And then to investigate the pathological characteristics of this quail model. Methods Thirty Longcheng quails were randomly divided into two groups： control group and model group （n=15）. The control group quails were fed with normal diet and model group quails were fed with high fat diet for 14 days. After a 12-hour overnight fast, liver and abdominal fat at euthanasia as well as serum were collected. The levels of serum uric acid, total cholesterol, high density lipoprotein cholesterol （HDL-C）, low density lipoprotein cholesterol （LDL-C）, triglyceride, free fatty acid （FFA）, and blood glucose were assayed. The activity changes of adenosine deaminase （ADA）, xanthine oxidase （XOD）, lipoprotein lipase （LPL）, hepatic lipase （HL）, and fatty acid synthetase （FAS） were analyzed. Results Compared with control group, the abdominal fat content （0.74±0.63 vs. 1.36±0.65 g, P〈0.05） and abdominal fat index （0.44%±0.30% vs. 0.85%±0.30%, P〈0.01） as well as live lipid index （3.61%±0.65% vs. 11.33%±2.14%, P〈0.01） in model group significantly increased; the levels of serum uric acid （210.61±94,76 vs. 304.25±141.94 /amol/L, P〈0.05）, total cholesterol （4.20±0.51 vs. 20.10±11.25 mmol/L, P〈0.01）, LDL-C （1.16±0.29 vs. 10.78±6.48 mmol/L, P〈0.01）, and FFA （0.39±0.14 vs. 0.55±0.15 mmol/L, P〈0.01） in model group significantly increased; HDL-C （5.85±0.95 vs. 4.14±2.03 mmol/L, P〈0.05） significantly decreased; the levels of triglyceride and blood glucose had no significant changes （P〉0.05）; the activities of ADA （9.71±3.05 vs. 17.19±5.10 U/ml, P〈0.01） and XOD （10.58±6,88 vs. 19.22＋9.44 U/L, P〈0.01） in model group significantly increased; and FAS, LPL, HL had no significant changes （P〉0.05）. Conclusions High fat diet can induce abdominal fat accumulation with hyperuricemia and hypercholesterolemia quail model. The changes of uric acid and lipid metabolic enzyme activities may he the pathological mechanism of abdominal fat accumulation with hyperuricemia and hypercholesterolemia.

Distribution Characteristics and Accumulation Model for the Coal-formed Gas Generated from Permo-Carboniferous Coal Measures in Bohai Bay Basin, China: A Review

Coal-formed gas generated from the Permo-Carboniferous coal measures has become one of the most important targets for deep hydrocarbon exploration in the Bohai Bay Basin,offshore eastern China.However,the proven gas reserves from this source rock remain low to date,and the distribution characteristics and accumulation model for the coal-formed gas are not clear.Here we review the coal-formed gas deposits formed from the Permo-Carboniferous coal measures in the Bohai Bay Basin.The accumulations are scattered,and dominated by middle-small sized gas fields,of which the proven reserves ranging from 0.002 to 149.4×108 m3 with an average of 44.30×108 m3 and a mid-point of 8.16×108 m3.The commercially valuable gas fields are mainly found in the central and southern parts of the basin.Vertically,the coal-formed gas is accumulated at multiple stratigraphic levels from Paleogene to Archaeozoic,among which the Paleogene and PermoCarboniferous are the main reservoir strata.According to the transporting pathway,filling mechanism and the relationship between source rocks and reservoir,the coal-formed gas accumulation model can be defined into three types:"Upward migrated,fault transported gas"accumulation model,"Laterally migrated,sandbody transported gas"accumulation model,and"Downward migrated,sub-source,fracture transported gas"accumulation model.Source rock distribution,thermal evolution and hydrocarbon generation capacity are the fundamental controlling factors for the macro distribution and enrichment of the coal-formed gas.The fault activity and the configuration of fault and caprock control the vertical enrichment pattern.

Modified Grey Model Predictor Design Using Optimal Fractional-order Accumulation Calculus

The major advantage of grey system theory is that both incomplete information and unclear problems can be processed precisely. Considering that the modeling of grey model(GM) depends on the preprocessing of the original data,the fractional-order accumulation calculus could be used to do preprocessing. In this paper, the residual sequence represented by Fourier series is used to ameliorate performance of the fractionalorder accumulation GM(1,1) and improve the accuracy of predictor. The state space model of optimally modified GM(1,1)predictor is given and genetic algorithm(GA) is used to find the smallest relative error during the modeling step. Furthermore,the fractional form of continuous GM(1,1) is given to enlarge the content of prediction model. The simulation results illustrated that the fractional-order calculus could be used to depict the GM precisely with more degrees of freedom. Meanwhile, the ranges of the parameters and model application could be enlarged with better performance. The method of modified GM predictor using optimal fractional-order accumulation calculus is expected to be widely used in data processing, model theory, prediction control and related fields.

Orderly coexistence and accumulation models of conventional and unconventional hydrocarbons in Lower Permian Fengcheng Formation,Mahu sag,Junggar Basin

By using the latest geological,seismic,drilling and logging data,this article studies the basic conditions for the formation of the total petroleum system and the orderly coexisting characteristics and accumulation models of conventional&unconventional reservoirs in the Lower Permian Fengcheng Formation in the Junggar Basin.Controlled by thermal evolution,hydrocarbon generation and expulsion process of the high-quality source rocks in alkaline lake as well as the characteristics of multi-type reservoirs(conglomerate,sandstone,dolomite and shale),conventional structure-lithologic reservoirs and tight oil and shale oil reservoirs controlled by source-reservoir structure have been formed.On the plane,mature conventional reservoirs,medium-high mature tight oil,and medium-high mature shale oil reservoirs coexist orderly from the slope area around Mahu sag to the sag.Based on the orderly coexisting characteristics of conventional and unconventional reservoirs in the Fengcheng Formation,it is clear that oil and gas in the Fengcheng Formation accumulate continuously over a large area in three accumulation models:integrated source-reservoir,source-reservoir in close contact,and separated source-reservoir model.The three accumulation models differ in relationship between source-reservoir structure,reservoir lithology and spatial distribution,hydrocarbon migration,oil and gas type.It is pointed out that the conventional&unconventional oil and gas should be explored and developed as a whole to achieve an overall breakthrough of the total petroleum system.This study is expected to enrich the geological theory of oil and gas enrichment in continental basins and to provide an analogy for exploration and research in other hydrocarbon-rich sags.

Numerical Simulations of Snow Accumulation in the Bogie Region of a Train Considering Snow Particle Rotation

To investigate the influence of snow particle rotational motion on the accumulation of snow in the bogie region of high-speed trains,an Euler‒Lagrange numerical approach is adopted.The study examines the effects of snow particle diameter and train speed on the ensuing dynamics.It is shown that considering snow particle rotational motion causes significant deviation in the particle trajectories with respect to non-rotating particles.Such a deviation increases with larger snow particle diameters and higher train speeds.The snow accumulation on the overall surface of the bogie increases,and the amount of snow on the vibration reduction device varies greatly.In certain conditions,the amount of accumulated snow can increase by several orders of magnitudes.

The Accumulation of He on a W Surface During keV-He Irradiation:Cluster Dynamics Modeling

The accumulation of He on a W surface during keV-He ion irradiation has been simulated using cluster dynamics modeling. This is based mainly on rate theory and improved by involving different types of objects, adopting up-to-date parameters and complex reaction processes, as well as considering the diffusion process along with depth. These new features make the simulated results compare very well with the experimental ones. The accumulation and diffusion processes are analyzed, and the depth and size dependence of the He concentrations contributed by different types of He clusters is also discussed. The exploration of the trapping and diffusion effects of the He atoms is helpful in understanding the evolution of the damages in the near-surface of plasma-facing materials under He ion irradiation.

Mechanism of cross-level settlements and void accumulation of wide and conventional sleepers in railway ballast

The cross-level and twist irregularities are the most dangerous irregularity types that could cause wheel unloading with the risk of derailments and additional maintenance expenses.However,the mechanism of the irregularities initiation and development is unclear.The motivation of the present study was the previous experimental studies on the application of wide sleepers in the ballasted track.The long-term track geometry measurements with wide sleepers show an enormous reduction of the vertical longitudinal irregularities compared to the conventional track.However,wide sleepers had higher twist and cross-section level irregularities.The present paper aims to explain the phenomenon by discrete element method(DEM)modeling the development process of sleeper inhomogeneous support at cross-level depending on the sleeper form.The DEM simulations show that the maximal settlement intensity is up to 3.5 times lower for a wide sleeper in comparison with the conventional one.Nevertheless,the cross-level differential settlements are almost the same for both sleepers.The particle loading distribution after all loading cycles is concentrated on the smaller area,up to the half sleeper length,with fully unloaded zones under sleeper ends.Ballast flow limitation under the central part of the sleeper could improve the resilience of wide sleepers to the development of cross-level irregularities.The mechanism of initiation of the cross-level irregularity is proposed,which assumes the loss of sleeper support under sleeper ends.The further growth of inhomogeneous settlements along the sleeper is assumed as a result of the interaction of two processes:ballast flow due to dynamic impact during void closing and on the other side high pressure due to the concentration of the pressure under the middle part of the sleeper.The DEM simulation results support the assumption of the mechanism and agree with the experimental studies.

Study on fault-controlled hydrocarbon migration and accumulation process and models in Zhu I Depression

Through the analysis of the faults and their internal structure in Zhu I Depression,it is found that the internal structure of the late fault is obviously segmented vertically.It develops unitary structure(simple fault plane)in shallow layers,binary structure(induced fracture zone in hanging wall and sliding fracture zone in footwall)in middle,layers and ternary structure(induced fracture zone in hanging wall and sliding fracture zone in middle,and induced fracture zone in footwall)in deep layers.Because the induced fracture zone is a high porosity and permeability zone,and the sliding fracture zone is a low porosity and ultra-low permeability zone,the late fault in middle layers has the character of"transporting while sealing".The late fault can transport hydrocarbon by its induced fracture zone in the side of the hanging wall and seal hydrocarbon by its sliding fracture zone in the side of the footwall.In deep layers,the late fault has the character of"dual-transportation",induced fracture zones in both sides of hanging wall and footwall can transport hydrocarbon.The early fault that only developed in the deep layers is presumed to be unitary structure,which plays a completely sealing role in the process of hydrocarbon migration and accumulation due to inactivity during the hydrocarbon filling period.Controlled by hydrocarbon source,early/late faults,sand bodies and traps,two reservoir-forming models of"inverted L"and"stereo-spiral"can be proposed in middle layers,while two reservoir-forming models of"cross fault"and"lateral fault sealing"are developed in the deep layers of Zhu I Depression.

An improved model of partition curve based on accumulation normal distribution function

Extensive studies based on partition curve of gravity separation have been investigated. All created models are merely used to simulate density distribution at the same size fraction. However, they cannot be used to predictive distribution of materials depending on compound feature of density and size. According to this situation, an improved model of partition curve based on accumulation normal distribution, which was distinguished from conventional model of accumulation normal distribution for partition curve, was proposed in this paper. It could simulate density distribution at different size fractions by using the density-size compound index and conflating the partition curves at different size fractions as one partition curve. The feasibility of three compound indexes, including mass index, settlement index and transformation index, were investigated. Specific forms of the improved model were also proposed. It is found that transformation index leads to the best fitting results, while the fitting error is only 1.75 according to the fitting partition curve.

Dynamic stress accumulation model of granite residual soil under cyclic loading based on small-size creep tests

The creep behaviors of granite residual soil with pre-stress of 100 kPa was investigated by a series of small size creep tests. Three different types of strain curves were obtained at different stress levels. Based on creep characteristics of the granite residual soil under different stress levels, a creep model of the granite residual soil was established by rheological theory, and related parameters of the model were determined according to the experimental data at the same time. Further on, based on the established creep model, a theoretical model of dynamic stress accumulation in the granite residual soil under cyclic loading was deduced. It is found that there is a threshold of dynamic stress accumulation in this theoretical model. The dynamic stress accumulation laws of the granite residual soil are different under different cyclic loading stress. Finally, with the dynamic stress accumulation laws in the small-size samples of granite residual soil under different cycle loading studied and the experimental results comparing with the theoretical results, it verifies the validity of the theoretical model.

Major controlling factors and hydrocarbon accumulation models of large-scale lithologic reservoirs in shallow strata around the Bozhong sag,Bohai Bay Basin,China

Based on the practice of oil and gas exploration and the analysis of shallow lithologic reservoirs,combined with the allocation relationship and enrichment law of oil and gas accumulation factors,main controlling factors and models of hydrocarbon accumulation of large lithologic reservoirs in shallow strata around the Bozhong sag are summarized,and favorable exploration areas are proposed.The coupling of the four factors of“ridge-fault-sand-zone”is crucial for the hydrocarbon enrichment in the shallow lithologic reservoirs.The convergence intensity of deep convergence ridges is the basis for shallow oil and gas enrichment,the activity intensity of large fault cutting ridges and the thickness of cap rocks control the vertical migration ability of oil and gas,the coupling degree of large sand bodies and fault cutting ridges control large-scale oil and gas filling,the fault sealing ability of structural stress concentration zones affects the enrichment degree of lithologic oil and gas reservoirs.Three enrichment models including uplift convergence type,steep slope sand convergence type and depression uplift convergence type are established through the case study of lithologic reservoirs in shallow strata around the Bozhong sag.

Structural characteristics and deep-water hydrocarbon accumulation model of the Scotian Basin, Eastern Canada

Commercial hydrocarbon reservoirs have been discovered in shallow-water areas of the Scotian Basin, Eastern Canada. However, knowledge about the structure and hydrocarbon accumulation characteristics of the basin is still insufficient, which constrains the oil and gas exploration in deep-water areas. Based on comprehensive data of magnetic anomalies, seismic survey, and drilling, this study determines the structure characteristics of the Scotian Basin and its hydrocarbon accumulation conditions in deep waters and evaluates the deep-water hydrocarbon exploration potential. The transform faults and basement structures in the northern basin control the sedimentary framework showing thick strata in east and thin strata in west of the basin. The bowl-shaped depression formed by thermal subsidence during the transitional phase and the confined environment (micro basins) caused by salt tectonics provide favorable conditions for the development of source rocks during the depression stage (also referred to as the depression period sequence) of the basin. The progradation of large shelf-margin deltas during the drift phase and steep continental slope provide favorable conditions for the deposition of slope-floor fans on continental margins of the basin. Moreover, the source-reservoir assemblage comprising the source rocks within the depression stage and the turbidite sandstones on the continental margin in the deep waters may form large deep-water turbidite sandstone reservoirs. This study will provide a valuable reference for the deep-water hydrocarbon exploration in the Scotian Basin.

A New Accumulation Model of Coal Seams in France Extensional Basins

This paper, based on the sedimentary features of the coal seams in the typical extensional (faulted) coal basins between two inland mountainous areas of the Central Massif (France) deals with the accumulation mechanism and the corresponding sedimentary tectonic conditions of these thick coalbeds, and proposes a new coal accumulation model for the inland lacustrine basin thick coalbeds. The presence of a great number of gravity flow sediments such as detrital flow, diluted slurry flow or turbidity current sediments in the coal seams, and that of the contemporaneous gravity slump and deformation structure in the coal seam itself both indicate that the lacustrine environment in the accumulation of the thick coalbeds was characterized by the relatively deep flood and violent sedimentation. This model can not only interpret reasonably the accumulation mechanism of the thick coalbeds developed in the fault basins in the Central Massif, France, but also show its features distinctively from those of the accumulation model of the traditional thick coalbeds.

Accumulation model and prediction of Miocene heavy oil distribution in Gulf of Suez Basin,Egypt

The Gulf of Suez Basin is a very mature and extremely prospective petroleum province. Many heavy oil fields have been found in the Basin,and such reserves are abundant. Characteristics and models of heavy oil are analyzed in this study based on tectonic,basin evolution,stratigraphic distribution and geochemical data.The best reservoirs of heavy oil are Miocene sandstone and limestone formations. Source rocks of hydrocarbon include deep limestone and shale of the Brown Limestone,the Thebes Formation and the Rudeis Formation.Thick evaporite rocks with rock salts and anhydrites deposited broadly throughout the basin are the most important regional seals,whereas Miocene shales are intraformational and regional seals that cover small areas. Heavy oil could be directly generated or densified during vertical migration along faults and reservoir accumulation.The heavy oil accumulation model is a mixed model that includes three mechanisms: fault dispersal,sulfocompound reactions and hydrocarbons generated from immature source rock. After analyzing the model and the distribution of source rocks,reservoirs,heavy oil fields and structures,it is concluded that the potential heavy oil area is at the center of the basin.

Whole petroleum system and hydrocarbon accumulation model in shallow and medium strata in northern Songliao Basin,NE China

Based on the oil and gas exploration practice in the Songliao Basin,combined with the latest exploration and development data such as seismic,well logging and geochemistry,the basic geological conditions,oil and gas types and distribution characteristics,reservoir-forming dynamics,source-reservoir relationship and hydrocarbon accumulation model of the whole petroleum system in shallow and medium strata in the northern part of Songliao Basin are systematically studied.The shallow-medium strata in northern Songliao Basin have the conditions for the formation of whole petroleum system,with sufficient oil and gas sources,diverse reservoir types and well-developed transport system,forming a whole petroleum system centered on the source rocks of the Cretaceous Qingshankou Formation.Different types of oil and gas resources in the whole petroleum system are correlated with each other in terms of depositional system,lithologic association and physical property changes,and they,to a certain extent,have created the spatial framework with orderly symbiosis of shallow-medium conventional oil reservoirs,tight oil reservoirs and shale oil reservoirs in northern Songliao Basin.Vertically,the resources are endowed as conventional oil above source,shale oil/tight oil within source,and tight oil below source.Horizontally,conventional oil,tight oil,interlayer-type shale oil,and pure shale-type shale oil are developed in an orderly way,from the margin of the basin to the center of the depression.Three hydrocarbon accumulation models are recognized for the whole petroleum system in northern Songliao Basin,namely,buoyancy-driven charging of conventional oil above source,retention of shale oil within source,and pressure differential-driven charging of tight oil below source.

Stress and Strain Accumulation Due to a Long Dip-Slip Fault Movement in an Elastic-Layer over a Viscoelastic Half Space Model of the Lithosphere-Asthenosphere System

Most of the earthquake faults in North-East India, China, mid Atlantic-ridge, the Pacific seismic belt and Japan are found to be predominantly dip-slip in nature. In the present paper a dip-slip fault is taken situated in an elastic layer over a viscoelastic half space representing the lithosphere-asthenosphere system. A movement of the dip-slip nature across the fault occurs when the accumulated stress due to various tectonic reasons e.g. mantle convection etc., exceeds the local friction and cohesive forces across the fault. The movement is assumed to be slipping in nature, expressions for displacements, stresses and strains are obtained by solving associated boundary value problem with the help of integral transformation and Green’s function method and a suitable numerical methods is used for computation. A detailed study of these expressions may give some ideas about the nature of stress accumulation in the system, which in turn will be helpful in formulating an earthquake prediction programme.

The origin and accumulation model of crude oils from oil reservoirs Chang 9 and Chang 10 in the Yanchang Formation of the Ordos Basin

In the lower parts of oil reservoirs Chang 9 and Chang 10 of the Yanchang Formation are oil-bearing layers newly found in oil exploration in the Ordos Basin.Based on GC,GC-MS analyses of saturated hydrocarbons from crude oils and source rocks,reservoir fluid inclusions and BasinMod,the origin of crude oils,accumulation period and accumulation models are discussed in combination with other petroleum geology data in this paper.The result shows that(1) there are two different types of crude oils in oil reservoir Chang 9 in the Longdong and Jiyuan regions:crude oils of typeⅠ(Well D86,Well A44,Well A75,Well B227,Well X62 and Well Z150) are mainly de-rived from the Chang 7 source rocks(including mudstones and shales) and distributed in the Jiyuan and Longdong regions;those of typeⅡ(Well Z14 and Well Y427),are distributed in the Longdong region,which are derived from the Chang 9 source rocks.Crude oils from oil reservoir Chang 10 in the Shanbei region are mainly derived from the Chang-9 source rocks;(2) there are two phases of hydrocarbon filling in oil reservoir Chang 9 in the Jiyuan and Longdong regions and oil reservoir Chang 10 in the Shanbei region:The first phase started at the early stage of J2z.The process of hydrocarbon filling was discontinuous in the Late Jurassic,because of the tectonic-thermal event in the Ordos Basin.The second phase was the main accumulation period,and hydrocarbons began to accumulate from the late stage of J2a to the middle-late of K1,mainly at the middle-late stage of K1;(3) there exist two types of accu-mulation models in oil reservoirs Chang 9 and Chang 10 of the Yanchang Formation:source rocks of the reservoirs in oil reservoir Chang 9 in the Jiyuan region and oil reservoir Chang 10 in the Shanbei region,the mixed type of reservoirs on the lateral side of source rocks and source rocks of the reservoirs in oil reservoir Chang 9 in the Long-dong region.

Tight gas charging and accumulation mechanisms and mathematical model

The gas-water distribution and production heterogeneity of tight gas reservoirs have been summarized from experimental and geological observations, but the charging and accumulation mechanisms have not been examined quantitatively by mathematical model. The tight gas charging and accumulation mechanisms were revealed from a combination of physical simulation of nuclear magnetic resonance coupling displacement, numerical simulation considering material and mechanical equilibria, as well as actual geological observation. The results show that gas migrates into tight rocks to preferentially form a gas saturation stabilization zone near the source-reservoir interface. When the gas source is insufficient, gas saturation reduction zone and uncharged zone are formed in sequence from the source-reservoir interface. The better the source rock conditions with more gas expulsion volume and higher overpressure, the thicker the gas saturation stabilization and reduction zones, and the higher the overall gas saturation. When the source rock conditions are limited, the better the tight reservoir conditions with higher porosity and permeability as well as larger pore throat, the thinner the gas saturation stabilization and reduction zones, but the gas saturation is high. The sweet spot of tight gas is developed in the high-quality reservoir near the source rock, which often corresponds to the gas saturation stabilization zone. The numerical simulation results by mathematical model agree well with the physical simulation results by nuclear magnetic resonance coupling displacement, and reasonably explain the gas-water distribution and production pattern of deep reservoirs in the Xujiaweizi fault depression of the Songliao Basin and tight gas reservoirs in the Linxing-Huangfu area of the Ordos Basin.