Basing on warm mechanical property of SUS304 stainless steel and hydro-mechanical deep drawing process, warm hydro-mechanical deep drawing process is proposed and discussed with experiments in this paper. The experime...Basing on warm mechanical property of SUS304 stainless steel and hydro-mechanical deep drawing process, warm hydro-mechanical deep drawing process is proposed and discussed with experiments in this paper. The experiments are performed at four different temperatures. The results show that the formability of stainless steel is improved under the condition of warm temperature. Warm hydro-mechanical deep drawing raises limiting drawing ratio of SUS304 effectively, and limiting drawing ratio 3.3 is obtained, which is beyond 2.0 with conventional deep drawing. The temperature of 90℃ is beneficial to the forming of SUS304 stainless steel, the strain-induced martensite is controlled effectively, and the thickness distribution is more uniform.展开更多
The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FEA with design of experiments tools were used to predict a...The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FEA with design of experiments tools were used to predict appropriate warm forming temperature conditions for deep drawing and two-dimensional stamping cases. In the investigated temperature range of 25?250 ℃, the formability of Al-5083 alloy is found to be greatly dependent on the temperature distribution of the die and punch. To achieve increased degrees of forming, different temperature levels should be assigned to the corner and body of the die and punch. And the optimal temperature distributions for warm deep drawing and warm two-dimensional stamping are not identical.展开更多
文摘Basing on warm mechanical property of SUS304 stainless steel and hydro-mechanical deep drawing process, warm hydro-mechanical deep drawing process is proposed and discussed with experiments in this paper. The experiments are performed at four different temperatures. The results show that the formability of stainless steel is improved under the condition of warm temperature. Warm hydro-mechanical deep drawing raises limiting drawing ratio of SUS304 effectively, and limiting drawing ratio 3.3 is obtained, which is beyond 2.0 with conventional deep drawing. The temperature of 90℃ is beneficial to the forming of SUS304 stainless steel, the strain-induced martensite is controlled effectively, and the thickness distribution is more uniform.
基金Project(50225520) supported by the National Found for Distinguished Young Scholars
文摘The effect of temperature distribution on warm forming performance was investigated for 5083-O (Al-Mg) sheet metal blanks. Combined isothermal/non-isothermal FEA with design of experiments tools were used to predict appropriate warm forming temperature conditions for deep drawing and two-dimensional stamping cases. In the investigated temperature range of 25?250 ℃, the formability of Al-5083 alloy is found to be greatly dependent on the temperature distribution of the die and punch. To achieve increased degrees of forming, different temperature levels should be assigned to the corner and body of the die and punch. And the optimal temperature distributions for warm deep drawing and warm two-dimensional stamping are not identical.
基金National Nature Science Foundation of China(51205196,51275003)Natural Science Foundation of Jiangsu Province(BK20151469)+1 种基金the Fundamental Research Funds for the Central Universities(NJ20150023)Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
