Structural characteristics and deep-water hydrocarbon accumulation model of the Scotian Basin, Eastern Canada

Commercial hydrocarbon reservoirs have been discovered in shallow-water areas of the Scotian Basin, Eastern Canada. However, knowledge about the structure and hydrocarbon accumulation characteristics of the basin is still insufficient, which constrains the oil and gas exploration in deep-water areas. Based on comprehensive data of magnetic anomalies, seismic survey, and drilling, this study determines the structure characteristics of the Scotian Basin and its hydrocarbon accumulation conditions in deep waters and evaluates the deep-water hydrocarbon exploration potential. The transform faults and basement structures in the northern basin control the sedimentary framework showing thick strata in east and thin strata in west of the basin. The bowl-shaped depression formed by thermal subsidence during the transitional phase and the confined environment (micro basins) caused by salt tectonics provide favorable conditions for the development of source rocks during the depression stage (also referred to as the depression period sequence) of the basin. The progradation of large shelf-margin deltas during the drift phase and steep continental slope provide favorable conditions for the deposition of slope-floor fans on continental margins of the basin. Moreover, the source-reservoir assemblage comprising the source rocks within the depression stage and the turbidite sandstones on the continental margin in the deep waters may form large deep-water turbidite sandstone reservoirs. This study will provide a valuable reference for the deep-water hydrocarbon exploration in the Scotian Basin.

Fate of Parent and Substituted Polycyclic Aromatic Hydrocarbons in SBR/MBBR Treatment Process:Experimental Value Against Model Prediction

The knowledge of the existence,distribution and fate of polycyclic aromatic hydrocarbons(PAHs)and substituted polycyclic aromatic hydrocarbons(SPAHs)in wastewater treatment plants(WWTPs)was vital for reducing their concentrations entering the aquatic environment.The concentrations of 13 SPAHs and 16 PAHs were all determined in a WWTP with styrene butadiene rubber(SBR)in partnership with the moving bed biofilm reactor(MBBR)process.SPAHs presented a higher concentration lever than PAHs in nearly all samples.The total removal efficiencies of PAHs and SPAHs ranged from 64.0%to 71.36%and 78.4%to 79.7%,respectively.The total yearly loads of PAHs(43.0 kg)and SPAHs(73.0 kg)were mainly reduced by the primary and SBR/MBBR biological treatment stages.The tertiary treatment stage had a minor contribution to target compounds removal.According to a synthesis and improvement fate model,we found that the dominant processes changed as the chemical octanol water partition coefficient(K_(ow))increased.But the seasonal variations of experimental removal efficiencies were more obvious than that of predicted data.In the primary sedimentation tank,dissolution in the aqueous phase and sorption to sludge/particulate matter were controlling processes for the removal of PAHs and SPAHs.The sorption to sludge and biodegradation were the principal removal mechanisms during the SBR/MBBR biological treatment process.The contribution of volatilization to removal was always insignificant.Furthermore,the basic physicochemical properties and operating parameters influenced the fate of PAHs and SPAHs in the WWTP.

Whole petroleum system and hydrocarbon accumulation model in shallow and medium strata in northern Songliao Basin,NE China

Based on the oil and gas exploration practice in the Songliao Basin,combined with the latest exploration and development data such as seismic,well logging and geochemistry,the basic geological conditions,oil and gas types and distribution characteristics,reservoir-forming dynamics,source-reservoir relationship and hydrocarbon accumulation model of the whole petroleum system in shallow and medium strata in the northern part of Songliao Basin are systematically studied.The shallow-medium strata in northern Songliao Basin have the conditions for the formation of whole petroleum system,with sufficient oil and gas sources,diverse reservoir types and well-developed transport system,forming a whole petroleum system centered on the source rocks of the Cretaceous Qingshankou Formation.Different types of oil and gas resources in the whole petroleum system are correlated with each other in terms of depositional system,lithologic association and physical property changes,and they,to a certain extent,have created the spatial framework with orderly symbiosis of shallow-medium conventional oil reservoirs,tight oil reservoirs and shale oil reservoirs in northern Songliao Basin.Vertically,the resources are endowed as conventional oil above source,shale oil/tight oil within source,and tight oil below source.Horizontally,conventional oil,tight oil,interlayer-type shale oil,and pure shale-type shale oil are developed in an orderly way,from the margin of the basin to the center of the depression.Three hydrocarbon accumulation models are recognized for the whole petroleum system in northern Songliao Basin,namely,buoyancy-driven charging of conventional oil above source,retention of shale oil within source,and pressure differential-driven charging of tight oil below source.

Quantitative prediction model for the depth limit of oil accumulation in the deep carbonate rocks:A case study of Lower Ordovician in Tazhong area of Tarim Basin

With continuous hydrocarbon exploration extending to deeper basins,the deepest industrial oil accumulation was discovered below 8,200 m,revealing a new exploration field.Hence,the extent to which oil exploration can be extended,and the prediction of the depth limit of oil accumulation(DLOA),are issues that have attracted significant attention in petroleum geology.Since it is difficult to characterize the evolution of the physical properties of the marine carbonate reservoir with burial depth,and the deepest drilling still cannot reach the DLOA.Hence,the DLOA cannot be predicted by directly establishing the relationship between the ratio of drilling to the dry layer and the depth.In this study,by establishing the relationships between the porosity and the depth and dry layer ratio of the carbonate reservoir,the relationships between the depth and dry layer ratio were obtained collectively.The depth corresponding to a dry layer ratio of 100%is the DLOA.Based on this,a quantitative prediction model for the DLOA was finally built.The results indicate that the porosity of the carbonate reservoir,Lower Ordovician in Tazhong area of Tarim Basin,tends to decrease with burial depth,and manifests as an overall low porosity reservoir in deep layer.The critical porosity of the DLOA was 1.8%,which is the critical geological condition corresponding to a 100%dry layer ratio encountered in the reservoir.The depth of the DLOA was 9,000 m.This study provides a new method for DLOA prediction that is beneficial for a deeper understanding of oil accumulation,and is of great importance for scientific guidance on deep oil drilling.

Utility of fluid inclusion paleo-temperature in petroleum system modelling:A case study from western offshore,India

The paleo-temperature(Th)data from fluid inclusions are utilized for thermal history modelling using PetroMod software.Generally,bottom hole temperature(BHT)and vitrinite reflectance(Ro)measurements are widely used in petroleum system modelling(PSM)in the oil industry for calibration purposes.Th representing the minimum temperature of fluid entrapment estimated from fluid-inclusion study provides extra support to build the thermal models for PSM.Fluid inclusion parameters along with Rock-Eval pyrolysis analysis have been used to predict the maturity of oil in terms of API gravity as well as the maturity of source rocks respectively.Two exploratory wells RV-1(Mumbai Offshore Basin)and KK4C-A-1(Kerala-Konkan Offshore Basin),India were examined and the T_(h)from most of the fluid inclusions of wells RV-1 and KK4C-A-1 fell in the oil window range of 60-140℃suggesting thermal conditions favourable for oil generation in both of the wells.T_(h)of coeval aqueous inclusions along with the Hydrocarbon Fluid inclusions(HCFIs)was used to calibrate PSM.Vital parameters show that source rocks of well RV-1 are mature and that of well KK4C-A-1 are immature.Two sets of PSM are created in terms of generation and expulsion for the dry wells RV-1 and KK4C-A-1 and calibrated each well using fluid inclusion Th and BHT.From the fluid inclusion analysis method,it is evident that hydrocarbon generation happened in both wells and the paleo-temperature indicates that the formations of both wells were subjected to temperatures in the oil window range,even though it was designated as dry wells in the present scenario.The present study highlights the application of fluid inclusion paleo-temperature(Th)during calibration instead of commonly used methods.We could obtain desirable and accurate data output from PSM using T_(h) calibration.

A hydrocarbon enrichment model and prediction of favorable accumulation areas in complicated superimposed basins in China

The geologic conditions of superimposed basins in China are very complicated. This is mainly shown by multi-phase structural evolution, multiple sets of source-reservoir-cap rock combinations, multiple stages of hydrocarbon generation and expulsion from source rocks, multi-cycle hydrocarbon enrichment and accumulation, and multi-phase reservoir adjustment and reconstruction. The enrichment, accumulation and distribution of hydrocarbon is mainly controlled by the source rock kitchen, paleo- anticline, regional cap rock and intensity of tectonic movement. In this paper, the T-BCMS model has been developed to predict favorable areas of hydrocarbon accumulation in complicated superimposed basins according to time and spatial relationships among five key factors. The five factors include unconformity surface representing tectonic balancing （B）, regional cap rock representing hydrocarbon protection （C）, paleo-anticline representing hydrocarbon migration and accumulation （M）, source rock kitchen representing hydrocarbon generation and expulsion （S） and geological time （T）. There are three necessary conditions to form favorable areas of hydrocarbon accumulation. First, four key factors BCMS should be strictly in the order of BCMS from top to bottom. Second, superimposition of four key factors BCMS in the same area is the most favorable for hydrocarbon accumulation. Third, vertically ordered combination and superimposition in the same area of BCMS should occur at the same geological time. The model has been used to predict the most favorable exploration areas in Ordovician in the Tarim Basin in the main hydrocarbon accumulation periods. The result shows that 95% of the discovered Ordovician hydrocarbon reservoirs are located in the predicted areas, which indicates the feasibility and reliability of the key factor matching T-BCMS model for hydrocarbon accumulation and enrichment.

A unified model for the formation and distribution of both conventional and unconventional hydrocarbon reservoirs

The discovery and large-scale exploration of unconventional oil/gas resources since 1980s have been considered as the most important advancement in the history of petroleum geology;that has not only changed the balance of supply and demand in the global energy market,but also improved our understanding of the formation mechanisms and distribution characteristics of oil/gas reservoirs.However,what is the difference of conventional and unconventional resources and why they always related to each other in petroliferous basins is not clear.As the differences and correlations between unconventional and conventional resources are complex challenging issues and very critical for resources assessment and hydrocarbon exploration,this paper focused on studying the relationship of formations and distributions among different oil/gas reservoirs.Drilling results of 12,237 exploratory wells in 6 representative petroliferous basins of China and distribution characteristics for 52,926 oil/gas accumulations over the world were applied to clarify the formation conditions and genetic relations of different oil/gas reservoirs in a petroliferous basin,and then to establish a unified model to address the differences and correlations of conventional and unconventional reservoirs.In this model,conventional reservoirs formed in free hydrocarbon dynamic field with high porosity and permeability located above the boundary of hydrocarbon buoyancy-driven accumulation depth limit.Unconventional tight reservoirs formed in confined hydrocarbon dynamic field with low porosity and permeability located between hydrocarbon buoyancy-driven accumulation depth limit and hydrocarbon accumulation depth limit.Shale oil/gas reservoirs formed in the bound hydrocarbon dynamic field with low porosity and ultra-low permeability within the source rock layers.More than 75%of proved reserves around the world are discovered in the free hydrocarbon dynamic field,which is estimated to contain only 10%of originally generated hydrocarbons.Most of undiscovered resources distributed in the confined hydrocarbon dynamic field and the bound hydrocarbon dynamic field,which contains 90%of original generated hydrocarbons,implying a reasonable and promising area for future hydrocarbon explorations.The buried depths of hydrocarbon dynamic fields become shallow with the increase of heat flow,and the remaining oil/gas resources mainly exist in the deep area of“cold basin”with low geothermal gradient.Lithology changing in the hydrocarbon dynamic field causes local anomalies in the oil/gas dynamic mechanism,leading to the local formation of unconventional hydrocarbon reservoirs in the free hydrocarbon dynamic field or the occurrence of oil/gas enrichment sweet points with high porosity and permeability in the confined hydrocarbon dynamic field.The tectonic movements destroy the medium conditions and oil/gas components,which leads to the transformation of conventional oil/gas reservoirs formed in free hydrocarbon dynamic field to unconventional ones or unconventional ones formed in confined and bound hydrocarbon dynamic fields to conventional ones.

Hydrocarbon expulsion model and resource potential evaluation of high-maturity marine source rocks in deep basins:Example from the Ediacaran microbial dolomite in the Sichuan Basin,China

Hydrocarbon expulsion features and resource potential evaluation of source rocks are crucial for the petroleum exploration.High-maturity marine source rocks have not exhibited a hydrocarbon expulsion mode owing to the lack of low-maturity source rocks in deep petroliferous basins.We considered the Ediacaran microbial dolomite in the Sichuan Basin,the largest high-maturity marine gas layer in China,to exhibit a method that quantitatively characterizes the hydrocarbon expulsion of high-maturity marine source rocks.The experiment of fluid inclusion,rock pyrolysis,and vitrinite reflectance(Ro)of 119 microbial dolomite core samples obtained from the Dengying Formation were performed.A hydrocarbon expulsion model of high-maturity source rock was established,and its resource potential was evaluated.The results showed that the Ediacaran microbial dolomite in the Sichuan Basin is a good source rock showing vast resource potential.The hydrocarbon expulsion threshold is determined to be vitrinite reflectance at 0.92%.The hydrocarbon expulsion intensities in the geologic history is high with maximum of 1.6×10^(7)t/km^(2).The Ediacaran microbial dolomite expelled approximately 1.008×10^(12)t of hydrocarbons,and the recoverable resource was 1.5×10^(12)m^(3).The region can be categorized into areasⅠ,Ⅱ,Ⅲ,andⅣ,in decreasing order of hydrocarbon expulsion intensity.Areas with a higher hydrocarbon expulsion intensity have a lower drilling risk and should be prioritized for exploration in the orderⅠ>Ⅱ>Ⅲ>Ⅳ.Two areas,northern and central parts of Ediacaran in the Sichuan Basin,were selected as prospects which had the drilling priority in the future gas exploration.The production data of 55 drilled wells verified the high reliability of this method.This model in this study does not require low-maturity samples and can be used for evaluating high-maturity marine source rocks,which has broad applicability in deep basins worldwide.

Environmental Capacity of Petroleum Hydrocarbon Pollutants in Jiaozhou Bay, China: Modeling and Calculation

An environmental capacity model for the petroleum hydrocarbon pollutions （PHs） in Jiaozhou Bay is constructed based on field surveys, mesocosm, and parallel laboratory experiments. Simulated results of PHs seasonal successions in 2003 match the field surveys of Jiaozhou Bay resaonably well with a highest value in July. The Monte Carlo analysis confirms that the variation of PHs concentration significantly correlates with the river input. The water body in the bay is reasonably subjected to self-purification processes, such as volatilization to the atmosphere, biodegradation by microorganism, and transport to the Yellow Sea by water exchange. The environmental capacity of PHs in Jiaozhou Bay is 1500 tons per year IF the seawater quality criterion （Grade Ⅰ/Ⅱ, 0.05 mgLl） in the region is to be satisfied. The contribution to self-purification by volatilization, biodegradation, and transport to the Yellow Sea accounts for 48%, 28%, and 23%, respectively, which make these three processes the main ways of PHs purification in Jiaozhou Bay.

Generalized Pareto Distribution Model and Its Application to Hydrocarbon Resource Structure Prediction of the Huanghua Depression

The generalized Pareto distribution model is a kind of hydrocarbon pool size probability statistical method for resource assessment. By introducing the time variable, resource conversion rate and the geological variable, resource density, such model can describe not only different types of basins, but also any exploration samples at different phases of exploration, up to the parent population. It is a dynamic distribution model with profound geological significance and wide applicability. Its basic principle and the process of resource assessment are described in this paper. The petroleum accumulation system is an appropriate assessment unit for such method. The hydrocarbon resource structure of the Huanghua Depression in Bohai Bay Basin was predicted by using this model. The prediction results accord with the knowledge of exploration in the Huanghua Depression, and point out the remaining resources potential and structure of different petroleum accumulation systems, which are of great significance for guiding future exploration in the Huanghua Depression.

Orderly coexistence and accumulation models of conventional and unconventional hydrocarbons in Lower Permian Fengcheng Formation,Mahu sag,Junggar Basin

By using the latest geological,seismic,drilling and logging data,this article studies the basic conditions for the formation of the total petroleum system and the orderly coexisting characteristics and accumulation models of conventional&unconventional reservoirs in the Lower Permian Fengcheng Formation in the Junggar Basin.Controlled by thermal evolution,hydrocarbon generation and expulsion process of the high-quality source rocks in alkaline lake as well as the characteristics of multi-type reservoirs(conglomerate,sandstone,dolomite and shale),conventional structure-lithologic reservoirs and tight oil and shale oil reservoirs controlled by source-reservoir structure have been formed.On the plane,mature conventional reservoirs,medium-high mature tight oil,and medium-high mature shale oil reservoirs coexist orderly from the slope area around Mahu sag to the sag.Based on the orderly coexisting characteristics of conventional and unconventional reservoirs in the Fengcheng Formation,it is clear that oil and gas in the Fengcheng Formation accumulate continuously over a large area in three accumulation models:integrated source-reservoir,source-reservoir in close contact,and separated source-reservoir model.The three accumulation models differ in relationship between source-reservoir structure,reservoir lithology and spatial distribution,hydrocarbon migration,oil and gas type.It is pointed out that the conventional&unconventional oil and gas should be explored and developed as a whole to achieve an overall breakthrough of the total petroleum system.This study is expected to enrich the geological theory of oil and gas enrichment in continental basins and to provide an analogy for exploration and research in other hydrocarbon-rich sags.

Modeling of the whole hydrocarbon-generating process of sapropelic source rock

Based on experimental data from hydrocarbon generation with a semi-open system, hydrocarbon generation kinetics modeling in gold tube of closed system, high temperature pyrolysis chromatography mass spectrometry experiment with open system and geological data, the characteristics of whole hydrocarbon-generating process, hydrocarbon expulsion efficiency and retained hydrocarbon quantity, origins of natural gas generated in high-over mature stage and cracking temperature of methane homologs were investigated in this study. The sapropelic source rock has a hydrocarbon expulsion efficiency of 30%-60% and 60%-80% in the major oil generation window(with Ro of 0.8%-1.3%) and high maturity stage(with Ro of 1.3%-2.0%) respectively; and the contribution ratio of kerogen degradation gas to oil cracking gas in total generated gas in high maturity stage is about 1:4. The degradation gas of kerogen accounts for 20%, the retained liquid hydrocarbon cracking gas accounts for 13.5%, and the amount of out-reservoir oil cracking gas(including aggregation type and dispersed oil cracking gas) accounts for 66.5%. The lower limit of gas cracking is determined preliminarily. Based on the new understandings, a model of the whole hydrocarbon-generating process of source rock is built.

Hydrocarbon-Generating Model of the Area Covered With Volcanic Rock

The distribution of Oil & gas fields shows their close relationship with the most active tectonic regions. This is not a coincidence but having a scientific reasons. The crustal active regions, refer to the places where the active natural earthquake, volcanic activities, underground water happened, and the areas of the leaking Off of natural gas to the surface of the crust. The magma of volcanic activities brings the organic "kitchen range body" hydrocarbon - generating model and inorganic genetic hydrocarbon to the regions covered by volcanic rock. Underground water brings a catalytic hydrocarbon generating model for organic matter, and the leaking - off of H2 and CO2 contributes a synthetic hydrocarbon - generating model. Volcanic activities bring the assemblage of Source, Reservoir and Seal formed by the sediments and magma the sedimentary basins, and the hydrocarbon - generating system with a "water - volcano" binary structure is formed. All these conditions are favorable and excellent for the formation of oil & gas fields. The distribution of AInerican oil & gas fields have very close relationship with the mines of Fe, Mn, Cr, Mo, W and V, deposits of Zn, Cu, V, Pb, Al and Hg, and the deposits of fluorite, sulfur, potassium salt, phosphate and halite, and the distribution of sulfate - chloride of river water. The reason why few oil & gas fields discovered in the regions covered by volcanic rock in western America maybe because of the view of "inconsistency between petroleum and volcano". Further more, It’s very difficult to carry out a geophysical exploration in such kinds of regions. This paper examined a few hydrocarbon - generating models (systems) mentioned above and came up with some flesh ideas on the exploration in the areas covered with volcanic rocks.

Tectonic-thermal history and hydrocarbon potential of the Pearl River Mouth Basin,northern South China Sea:Insights from borehole apatite fission-track thermochronology

The Pearl River Mouth Basin(PRMB)is one of the most petroliferous basins on the northern margin of the South China Sea.Knowledge of the thermal history of the PRMB is significant for understanding its tectonic evolution and for unraveling its poorly studied source-rock maturation history.Our investigations in this study are based on apatite fission-track(AFT)thermochronology analysis of 12 cutting samples from 4 boreholes.Both AFT ages and length data suggested that the PRMB has experienced quite complicated thermal evolution.Thermal history modeling results unraveled four successive events of heating separated by three stages of cooling since the early Middle Eocene.The cooling events occurred approximately in the Late Eocene,early Oligocene,and the Late Miocene,possibly attributed to the Zhuqiong II Event,Nanhai Event,and Dongsha Event,respectively.The erosion amount during the first cooling stage is roughly estimated to be about 455-712 m,with an erosion rate of 0.08-0.12 mm/a.The second erosion-driven cooling is stronger than the first one,with an erosion amount of about 747-814 m and an erosion rate between about 0.13-0.21 mm/a.The erosion amount calculated related to the third cooling event varies from 800 m to 3419 m,which is speculative due to the possible influence of the magmatic activity.

Low organic matter abundance and highly efficient hydrocarbon generation of saline source rock in the Qaidam Basin,NW China

The geochemical analysis and experimental simulation are comprehensively used to systematically study the hydrocarbon generation material,organic matter enrichment and hydrocarbon generation model of Paleogene source rock in the Western Qaidam Depression,Qaidam Basin,NW China.Three main factors result in low TOC values of saline lacustrine source rock of the Qaidam Basin:relatively poor nutrient supply inhibits the algal bloom,too fast deposition rate causes the dilution of organic matter,and high organic matter conversion efficiency causes the low residual organic carbon.For this type of hydrogen-rich organic matter,due to the reduction of organic carbon during hydrocarbon generation,TOC needs to be restored based on maturity before evaluating organic matter abundance.The hydrocarbon generation of saline lacustrine source rocks of the Qaidam Basin is from two parts:soluble organic matter and insoluble organic matter.The soluble organic matter is inherited from organisms and preserved in saline lacustrine basins.It generates hydrocarbons during low-maturity stage,and the formed hydrocarbons are rich in complex compounds such as NOS,and undergo secondary cracking to form light components in the later stage;the hydrocarbon generation model of insoluble organic matter conforms to the traditional“Tissot”model,with an oil generation peak corresponding to Ro of 1.0%.

塔里木盆地超深层走滑断控油气藏研究进展与趋势

在塔里木盆地开辟了超深层走滑断控油气藏勘探开发领域,但断控油气藏极为复杂,难以效益开发,亟需加强油气藏基础地质研究。走滑断控油气藏具有非均质性强、储集层与流体分布复杂、油气产量变化大及采收率低的共性,不同地区走滑断控油气藏的断裂、储集层、成藏与流体存在较大的差异,面临一系列勘探开发难题。建立了差异成因的走滑断裂破碎带及其控储模型,揭示了沿走滑断裂带“相-断-溶”三元复合控储、连片差异规模发育的成储机制;构建了“源-断-储-盖”四元耦合成藏、“小藏大田”的走滑断控油藏模型,揭示了超深层走滑断控油藏的形成与保存机理。突破了克拉通盆地弱走滑断裂难以形成走滑断控大规模储集层与大油气田的理论认识局限,明确了克拉通盆地走滑断裂系统大规模发育的成因机制、走滑断裂破碎带差异成储成藏机理与油气富集规律。

准噶尔盆地沙湾凹陷二叠系下乌尔禾组烃源岩类型与热演化研究

沙湾凹陷下组合油气资源丰富,下乌尔禾组烃源岩被证实是凹陷内主要的油气来源。然而,由于烃源岩埋深较大、勘探程度低,烃源岩类型、热演化以及生烃史尚不清楚,制约了下组合油气成藏规律的认识。本研究基于烃源岩地球化学参数,认识下乌尔禾组烃源岩基本特征,利用盆地模拟恢复烃源岩热演化以及生烃演化史,在此基础上对油气成藏过程进行分析。结果表明:沙湾凹陷下乌尔禾组烃源岩有机质类型以Ⅱ型为主,平均有机碳含量(TOC)为0.82%,生烃潜量(S_(1)+S_(2))为5.32 mg/g,为中等烃源岩,平均成熟度(Ro)为1.27%,处于成熟—高成熟阶段。热演化模拟显示下乌尔禾组烃源岩于晚三叠世晚期进入生烃门限(Ro=0.5%),晚侏罗世—晚白垩世达到生油高峰(Ro=1.0%)。白垩纪末期,有机质热演化进入了高成熟演化阶段(Ro>1.3%)。沙湾凹陷超深层储层经历多期油气充注,油气的多期混合以及断层活动的不均一性造成不同层位多种相态油气藏共存。研究认识为准噶尔盆地超深层油气成藏过程和机理研究奠定了坚实的基础。

塔里木盆地台盆区走滑断裂带多层叠加样式及石油地质意义

随着塔里木盆地油气勘探的不断深入,在台盆区古生界发现大规模走滑断裂系统,提出了一种新型断溶体油气藏。受塔里木盆地多期构造运动的影响,走滑断裂表现出多层结构,具有多期叠加活动特征。基于高品质三维地震资料、钻井资料及油气地质资料,对塔里木盆地大型走滑断裂的多层叠加特征及对油气的控制作用展开研究。研究结果表明:塔里木盆地台盆区走滑断裂带在古生界主要发育5个结构层,分别为下寒武统盐下构造层、中寒武统盐构造层、上寒武统—中奥陶统碳酸盐岩构造层、上奥陶统—石炭系碎屑岩构造层和二叠系岩浆岩构造层;受多期构造运动及走滑断裂带活动的影响,5层结构在空间上具有带状分布、垂向叠置、差异叠加的特征;断裂叠加类型多样,总体上可以分为连接型、叠接型、反转叠加型及反转改造型4种;走滑断裂带叠加方式影响了石油地质条件,可形成多层差异聚集油气藏,主要包括Ⅰ型油气藏(奥陶系碳酸盐岩油气藏)、Ⅱ型油气藏(奥陶系碳酸盐岩油气藏、志留系碎屑岩油气藏及二叠系岩浆岩油气藏)及Ⅲ型油气藏(寒武系盐下层白云岩油气藏)3种类型。

盐构造活动对油气成藏的控制作用:以下刚果盆地为例

盐构造对油气藏成藏具有重要的控制作用,很多富油气盆地都发育丰富的盐构造。本论文以南大西洋东海岸下刚果盆地为研究对象,从含油气盆地分析的角度,以构造地质学、沉积学和成藏动力学系统理论为指导,旨在明确盐岩构造变形特征及演化过程的基础上,分析盐岩构造变形对盐相关油气成藏的控制作用。基于二维和三维地震资料解释成果,识别出下刚果盆地发育盐滚、盐底辟、盐蓬/盐盖、厚层盐岩4种主要盐岩构造样式,明确了各类盐构造的变形特征及其上覆地层构造特征。最后,在分析盐构造变形对源、储、圈闭等静态成藏要素,以及圈闭演化过程、油气运移、保存等动态成藏过程影响的基础上,建立下刚果盆地油气动态成藏模式,以期指导该盆地下一步油气勘探。

准噶尔盆地中拐凸起东斜坡上乌尔禾组常规—致密油藏主控因素及成藏模式

准噶尔盆地中拐凸起东斜坡上乌尔禾组油气资源丰富,是效益勘探及建产的重要领域。应用测录井、生产测试及岩心分析化验资料,研究中拐凸起东斜坡上乌尔禾组储层特征,明确储层差异性的主控因素,建立中拐凸起东斜坡常规—致密油藏序次分布的成藏模式。结果表明:自北部向南部,研究区逐步由常规油藏转化为致密油藏,沉积作用是造成储层差异性的物质基础,控制储层岩性及原始物性,压实作用和浊沸石胶结作用加剧储层常规—致密差异演化;研究区成岩相带划分为泥质充填带、贫泥—弱胶结带、浊沸石胶结带和强压实—弱溶蚀带4种相带,其中贫泥—弱胶结带为有利储层发育带。该结果为研究区致密油藏勘探提供指导。