Hydrocarbon accumulation in deep ancient carbonate-evaporite assemblages

The Ediacaran–Ordovician strata within three major marine basins(Tarim,Sichuan,and Ordos)in China are analyzed.Based on previous studies focusing on the characteristics of the Neoproterozoic–Cambrian strata within the three major basins(East Siberian,Oman,and Officer in Australia)overseas,the carbonate–evaporite assemblages in the target interval are divided into three types:intercalated carbonate and gypsum salt,interbedded carbonate and gypsum salt,and coexisted carbonate,gypsum salt and clastic rock.Moreover,the concept and definition of the carbonate-evaporite assemblage are clarified.The results indicate that the oil and gas in the carbonate-evaporite assemblage are originated from two types of source rocks:shale and argillaceous carbonate,and confirmed the capability of gypsum salt in the saline environment to drive the source rock hydrocarbon generation.The dolomite reservoirs are classified in two types:gypseous dolomite flat,and grain shoal&microbial mound.This study clarifies that the penecontemporaneous or epigenic leaching of atmospheric fresh water mainly controlled the large-scale development of reservoirs.Afterwards,burial dissolution transformed and reworked the reservoirs.The hydrocarbon accumulation in carbonate-evaporite assemblage can be categorized into eight sub-models under three models(sub-evaporite hydrocarbon accumulation,supra-evaporite hydrocarbon accumulation,and inter-evaporite hydrocarbon accumulation).As a result,the Cambrian strata in the Tazhong Uplift North Slope,Maigaiti Slope and Mazatag Front Uplift Zone of the Tarim Basin,the Cambrian strata in the eastern-southern area of the Sichuan Basin,and the inter-evaporite Ma-4 Member of Ordovician in the Ordos Basin,China,are defined as favorable targets for future exploration.

Hydrocarbon accumulation and orderly distribution of whole petroleum system in marine carbonate rocks of Sichuan Basin,SW China

Based on the situation and progress of marine oil/gas exploration in the Sichuan Basin,SW China,the whole petroleum system is divided for marine carbonate rocks of the basin according to the combinations of hydrocarbon accumulation elements,especially the source rock.The hydrocarbon accumulation characteristics of each whole petroleum system are analyzed,the patterns of integrated conventional and unconventional hydrocarbon accumulation are summarized,and the favorable exploration targets are proposed.Under the control of multiple extensional-convergent tectonic cycles,the marine carbonate rocks of the Sichuan Basin contain three sets of regional source rocks and three sets of regional cap rocks,and can be divided into the Cambrian,Silurian and Permian whole petroleum systems.These whole petroleum systems present mainly independent hydrocarbon accumulation,containing natural gas of affinity individually.Locally,large fault zones run through multiple whole petroleum systems,forming a fault-controlled complex whole petroleum system.The hydrocarbon accumulation sequence of continental shelf facies shale gas accumulation,marginal platform facies-controlled gas reservoirs,and intra-platform fault-and facies-controlled gas reservoirs is common in the whole petroleum system,with a stereoscopic accumulation and orderly distribution pattern.High-quality source rock is fundamental to the formation of large gas fields,and natural gas in a whole petroleum system is generally enriched near and within the source rocks.The development and maintenance of large-scale reservoirs are essential for natural gas enrichment,multiple sources,oil and gas transformation,and dynamic adjustment are the characteristics of marine petroleum accumulation,and good preservation conditions are critical to natural gas accumulation.Large-scale marginal-platform reef-bank facies zones,deep shale gas,and large-scale lithological complexes related to source-connected faults are future marine hydrocarbon exploration targets in the Sichuan Basin.

Hydrocarbon accumulation history in Lower Cretaceous in northern slope of Bongor Basin in Chad,Central Africa

Based on the analysis of the fluid inclusion homogenization temperature and apatite fission track on the northern slope zone of the Bongor Basin in Chad,this paper studied the time and stages of hydrocarbon accumulation in the study area.The results show that:(1)The brine inclusions of the samples from the Kubla and Prosopis formations in the Lower Cretaceous coexisting with the hydrocarbon generally present two sets of peak ranges of homogenization temperature,with the peak ranges of low temperature and high temperature being 75–105℃ and 115–135℃,respectively;(2)The samples from the Kubla and Prosopis formations have experienced five tectonic evolution stages,i.e.,rapid subsidence in the Early Cretaceous,tectonic inversion in the Late Cretaceous,small subsidence in the Paleogene,uplift at the turn of the Paleogene and Neogene,and subsidence since the Miocene,in which the denudation thickness of the Late Cretaceous and after the turn of the Paleogene and Neogene are~1.8 km and~0.5 km,respectively.The cumulative denudation thickness of the two periods is about 2.3 km;(3)Using the brine inclusion homogenization temperature coexisting with the hydrocarbon as the capture temperature of the hydrocarbon,and combining with the apatite fission track thermal history modeling,the result shows that the Kubla and Prosopis formations in the Lower Cretaceous on the northern slope of the Bongor Basin have the same hydrocarbon accumulation time and stages,both of which have undergone two stages of hydrocarbon charging at 80–95 Ma and 65–80 Ma.The first stage of charging corresponds to the initial migration of hydrocarbon at the end of the Early Cretaceous rapid sedimentation,while the second stage of charging is in the stage of intense tectonic inversion in the Late Cretaceous.

Research advances on the mechanisms of reservoir formation and hydrocarbon accumulation and the oil and gas development methods of deep and ultra-deep marine carbonates

Based on the new data of drilling, seismic, logging, test and experiments, the key scientific problems in reservoir formation, hydrocarbon accumulation and efficient oil and gas development methods of deep and ultra-deep marine carbonate strata in the central and western superimposed basin in China have been continuously studied.(1) The fault-controlled carbonate reservoir and the ancient dolomite reservoir are two important types of reservoirs in the deep and ultra-deep marine carbonates. According to the formation origin, the large-scale fault-controlled reservoir can be further divided into three types:fracture-cavity reservoir formed by tectonic rupture, fault and fluid-controlled reservoir, and shoal and mound reservoir modified by fault and fluid. The Sinian microbial dolomites are developed in the aragonite-dolomite sea. The predominant mound-shoal facies, early dolomitization and dissolution, acidic fluid environment, anhydrite capping and overpressure are the key factors for the formation and preservation of high-quality dolomite reservoirs.(2) The organic-rich shale of the marine carbonate strata in the superimposed basins of central and western China are mainly developed in the sedimentary environments of deep-water shelf of passive continental margin and carbonate ramp. The tectonic-thermal system is the important factor controlling the hydrocarbon phase in deep and ultra-deep reservoirs, and the reformed dynamic field controls oil and gas accumulation and distribution in deep and ultra-deep marine carbonates.(3) During the development of high-sulfur gas fields such as Puguang, sulfur precipitation blocks the wellbore. The application of sulfur solvent combined with coiled tubing has a significant effect on removing sulfur blockage. The integrated technology of dual-medium modeling and numerical simulation based on sedimentary simulation can accurately characterize the spatial distribution and changes of the water invasion front.Afterward, water control strategies for the entire life cycle of gas wells are proposed, including flow rate management, water drainage and plugging.(4) In the development of ultra-deep fault-controlled fractured-cavity reservoirs, well production declines rapidly due to the permeability reduction, which is a consequence of reservoir stress-sensitivity. The rapid phase change in condensate gas reservoir and pressure decline significantly affect the recovery of condensate oil. Innovative development methods such as gravity drive through water and natural gas injection, and natural gas drive through top injection and bottom production for ultra-deep fault-controlled condensate gas reservoirs are proposed. By adopting the hierarchical geological modeling and the fluid-solid-thermal coupled numerical simulation, the accuracy of producing performance prediction in oil and gas reservoirs has been effectively improved.

Seismic interpretation and hydrocarbon accumulations implication of the Miocene Meishan Formation reefs in southern Qiongdongnan Basin, northern South China Sea

Numerous moundy reflections were found at the Upper Meishan Formation in southern Qiongdongnan Basin, South China Sea which are suspected reefs. However, no common understanding on the seismic and geologic interpretation was acquired. Based on seismic reflection identification, geometrical configuration description, wave impedance inversion, forward simulation, analysis of reef-building sedimentary environments and pseudomorph identification, these suspected-reef moundy reflections were studied in details.Three types of reefs were recognized, i.e., patch reef, platform-edge reef, and pinnacle reef. They have some typical characteristics of reefs, including moundy or lenticular shape, clear outline with crest and canal, internal foreset bedding, bidirectional uplap between limbs, and strong reflection at top and bottom. The patch reefs are of moundy seismic facies, with moderateestrong amplitude and moderate frequency, and distribute at the higher part of southern slope belt. Fore-reef and back-reef of patch reefs are slightly asymmetrical being perpendicular to palaeo-bathymetric orientation; while symmetrical to slightly asymmetrical being parallel to the palaeo-bathymetric orientation, and the wave impedance value is about 7 kg/m^3×m/s.Platform-edge reefs are of flat-moundy seismic facies with strong amplitude and moderate frequency, which develop at the carbonate platform edge of higher part of southern slope belt, and the wave impedance value is about 7.5 kg/m^3×m/s. Pinnacle reefs grow up on volcanic cones, forming the complex of pinnacle reef and volcanic cone. The Miocene Meishan Formation reefs in southern Qiongdongnan Basin, northern South China Sea, with high quality sourceereservoireseal assemblages, have good petroleum exploration prospects.

Multi-Stage Basin Development and Hydrocarbon Accumulations： A Review of the Sichuan Basin at Eastern Margin of the Tibetan Plateau

Sichuan Basin is one of the uppermost petroliferous basins in China. It experienced three evolutionary phases which were marine carbonate platform （Ediacaran to Late Triassic）, Indosinian-Yanshanian orogeny foreland basin （Late Triassic to Late Cretaceous） and uplift and tectonic modification （Late Cretaceous to Quaternary）. The present-day tectonics of the Sichuan Ba- sin and its periphery are characterized by three basic elements which are topography, basement type and surface structure, and two settings （plate margin and interior）. Therefore, be subdivided into five units which have different structure and tectonic history. The basin contains five different sets of source rocks with thickness up to 2 500 m. These source rocks were well preserved due to the presence of Middel-Lower Triassic evaporites （〉-200 m） and thick terrestrial sediments filling in the Indosinian-Yanshanian foreland basin （〉3 000 m）. The uplift and erosion since Late Cretaceous has significant influence on cross-strata migration and accumulation of oil and gas. The multi-phase evolution of the basin and its superimposed tectonic elements, good petroleum geologic conditions and diverse petroleum systems reveal its bright exploration prospects.

Petroleum geology and sub-source hydrocarbon accumulation of Permian reservoirs in Jinan Sag,eastern Junggar Basin,NW China

According to the latest drilling and the analysis of the burial history,source rock evolution history and hydrocarbon accumulation history,the sub-source hydrocarbon accumulation characteristics of the Permian reservoirs in the Jinan Sag,eastern Junggar Basin,are clarified,and the hydrocarbon accumulation model of these reservoirs is established.The results are obtained in four aspects.First,the main body of the thick salified lake basin source rocks in the Lucaogou Formation has reached the mature stage with abundant resource base.Large-scale reservoirs are developed in the Jingjingzigou,Wutonggou and Lucaogou formations.Vertically,there are multiple sets of good regional seals,the source-reservoir-caprock assemblage is good,and there are three reservoir-forming assemblages:sub-source,intra-source and above-source.Second,dissolution,hydrocarbon charging and pore-preserving effect,and presence of chlorite film effectively increase the sub-source pore space.Oil charging is earlier than the time when the reservoir becomes densified,which improves the efficiency of hydrocarbon accumulation.Third,buoyancy and source-reservoir pressure difference together constitute the driving force of oil charging,and the micro-faults within the formation give the advantage of"source-reservoir lateral docking"under the source rock.Microfractures can be critical channels for efficient seepage and continuous charging of oil in different periods.Fourth,the Jingjingzigou Formation experienced three periods of oil accumulation in the Middle-Late Permian,Middle-Late Jurassic and Late Neogene,with the characteristics of long-distance migration and accumulation in early stage,mixed charging and accumulation in middle stage and short-distance migration and high-position accumulation in late stage.The discovery and theoretical understanding of the Permian reservoirs in the Jinan Sag reveal that the thrust belt has good conditions for forming large reservoirs,and it is promising for exploration.The study results are of guidance and reference significance for oil and gas exploration in the Jinan Sag and other geologically similar areas.

Regional unconformities and their controls on hydrocarbon accumulation in Sichuan Basin, sW China

Based on outcrop,seismic and drilling data,the main regional unconformities in the Sichuan Basin and their controls on hydrocarbon accumulation were systematically studied.Three findings are obtained.First,six regional stratigraphic unconformities are mainly developed in the Sichuan Basin,from the bottom up which are between pre-Sinian and Sinian,between Sinian and Cambrian,between pre-Permian and Permian,between middle and upper Permian,between middle and upper Triassic,and between Triassic and Jurassic.Especially,16 of 21l conventional(and tight)gas fields discovered are believed to have formed in relation to regional unconformities.Second,regional unconformity mainly controls hydrocarbon accumulation from five aspects:(1)The porosity and permeability of reservoirs under the unconformity are improved through weathering crust karstification to form large-scale karst reservoirs;(2)Good source-reservoir-caprock assemblage can form near the unconformity,which provides a basis for forming large gas field;(3)Regional unconformity may lead to stratigraphic pinch-out and rugged ancient landform,giving rise to a large area of stratigraphic and lithologic trap groups;(4)Regional unconformity provides a dominant channel for lateral migration of oil and gas;and(5)Regional unconformity is conducive to large-scale accumulation of oil and gas.Third,the areas related to regional unconformities are the exploration focus of large gas fields in the Sichuan Basin.The pre-Sinian is found with source rocks,reservoir rocks and other favorable conditions for the formation of large gas fields,and presents a large exploration potential.Thus,it is expected to be an important strategic replacement.

Restoration of reservoir diagenesis and hydrocarbon accumulation process by calcite in-situ U-Pb dating and fluid inclusion analysis: A case study on Cretaceous Qingshuihe Formation in Gaoquan Structure, southern Junggar Basin, NW China

The complexity of diagenesis and hydrocarbon accumulation in the deep reservoirs in southern Junggar Basin restricts hydrocarbon exploration in the lower reservoir assemblage. The lithofacies and diagenesis of reservoirs in the Cretaceous Qingshuihe Formation in the Gaoquan structure of the Sikeshu Sag, southern Junggar Basin were analyzed. On this basis, the thermal history was calibrated using calcite in-situ U-Pb dating and fluid inclusion analysis to depict the hydrocarbon accumulation process in the Gaoquan structure. The results show that the Qingshuihe reservoir experienced two phases of calcite cementation and three phases of hydrocarbon charging. The calcite cements are dated to be (122.1±6.4) Ma, (14.4±1.0) Ma - (14.2±0.3) Ma. The hydrocarbon charging events occurred at around 14.2-30.0 Ma (low-mature oil), 14.2 Ma (mature oil), and 2 Ma (high-mature gas). The latter two phases of hydrocarbon charging contributed dominantly to the formation of reservoir. Due to the S-N compressive thrust activity during the late Himalayan period since 2 Ma, the traps in the Gaoquan structure were reshaped, especially the effective traps which developed in the main reservoir-forming period were decreased significantly in scale, resulting in weak hydrocarbon shows in the middle-lower part of the structure. This indicates that the effective traps in key reservoir-forming period controlled hydrocarbon enrichment and distribution in the lower reservoir assemblage. Calcite U-Pb dating combined with fluid inclusion analysis can help effectively describe the complex diagenesis and hydrocarbon accumulation process in the central-west part of the basin.

In-situ hydrocarbon formation and accumulation mechanisms of micro- and nano-scale pore-fracture in Gulong shale, Songliao Basin, NE China

By conducting experimental analyses, including thermal pyrolysis, micro-/nano-CT, argon-ion polishing field emission scanning electron microscopy (FE-SEM), confocal laser scanning microscopy (CLSM), and two-dimensional nuclear magnetic resonance (2D NMR), the Gulong shale oil in the Songliao Basin was investigated with respect to formation model, pore structure and accumulation mechanism. First, in the Gulong shale, there are a large number of pico-algae, nano-algae and dinoflagellates, which were formed in brackish water environment and constituted the hydrogen-rich oil source materials of shale. Second, most of the oil-generating materials of the Qingshankou Formation shale exist in the form of organo-clay complex. During organic matter thermal evolution, clay minerals had double effects of suppression and catalytic hydrogenation, which expanded shale oil window and increased light hydrocarbon yield. Third, the formation of storage space in the Gulong Shale was related to dissolution and hydrocarbon generation. With the diagenesis, micro-/nano-pores increased, pore diameter decreased and more bedding fractures appeared, which jointly gave rise to the unique reservoir with dual media (i.e. nano-scale pores and micro-scale bedding fractures) in the Gulong shale. Fourth, the micro-/nano-scale oil storage unit in the Gulong shale exhibits independent oil/gas occurrence phase, and shows that all-size pores contain oils, which occur in condensate state in micropores or in oil-gas two phase (or liquid) state in macropores/mesopores. The understanding about Gulong shale oil formation and accumulation mechanism has theoretical and practical significance for advancing continental shale oil exploration in China.

New understanding and exploration direction of hydrocarbon accumulation in Termit Basin, Niger

Based on the seismic and drilling data, casting thin sections, geochemical analysis of oil and rock samples, and hydrocarbon generation history simulation, the hydrocarbon accumulation characteristics and exploration direction of Termit superimposed marine–continental rift basin are discussed. The Termit basin is superimposed with two-phase rifts(Early Cretaceous and Paleogene). The subsidence curves from two wells on the Trakes slope in the east of the basin show high subsidence rate in the Late Cretaceous, which is believed to be high deposition rate influenced by transgression. However, a weak rift may also be developed. The depositional sequences in the Termit basin were controlled by the Late Cretaceous marine transgression cycle and the Paleogene lacustrine transgression cycle, giving rise to two types of superimposed marine–continental “source-sink” deposits. The marine and continental mixed source rocks developed universally in the whole basinduring the marine transgression period, and are overlaid by the Paleogene Sokor 1 reservoir rocks and Sokor 2 caprocks developed during the lacustrine transgression period, forming the unique superimposed marine–continental basin in WCARS. The early low geothermal gradient in the Termit basin resulted in the late hydrocarbon generated by the source rock of Upper Cretaceous Yogou in Paleogene. Mature source rock of Upper Cretaceous Donga developed in the Trakes slope, so that the double-source-supply hydrocarbon and accumulation models are proposed for the Trakes slope in which formed the oil fields. Due to virtue of the newly proposed hydrocarbon accumulation model and the exploration activities in recent years in the Termit superimposed marine–continental rift basin, an additional effective exploration area of about 2500 km2has been confirmed in the east of the basin. It is believed that potential domains such as Sokor 1, Donga and Upper Cretaceous lithologic traps in the southeast of the basin are key expected targets for exploration and frontier evaluation in future.

Heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in foreland thrust belts: A case study of deep Cretaceous Qingshuihe Formation clastic reservoirs in southern Junggar Basin, NW China

Using the data of drilling, logging, core, experiments and production, the heterogeneity and differential hydrocarbon accumulation model of deep reservoirs in Cretaceous Qingshuihe Formation(K1q) in the western section of the foreland thrust belt in southern Junggar Basin are investigated. The target reservoirs are characterized by superimposition of conglomerates, sandy conglomerates and sandstones, with high content of plastic clasts. The reservoir space is mainly composed of intergranular pores. The reservoirs are overall tight, and the sandy conglomerate has the best physical properties. The coupling of short deep burial period with low paleotemperature gradient and formation overpressure led to the relatively weak diagenetic strength of the reservoirs. Specifically, the sandy conglomerates show relatively low carbonate cementation, low compaction rate and high dissolution porosity. The special stress-strain mechanism of the anticline makes the reservoirs at the top of the anticline turning point more reformed by fractures than those at the limbs, and the formation overpressure makes the fractures in open state. Moreover, the sandy conglomerates have the highest oil saturation. Typical anticline reservoirs are developed in deep part of the thrust belt, but characterized by "big trap with small reservoir". Significantly, the sandy conglomerates at the top of anticline turning point have better quality, lower in-situ stress and higher structural position than those at the limbs,with the internal hydrocarbons most enriched, making them high-yield oil/gas layers. The exponential decline of fractures makes hydrocarbon accumulation difficult in the reservoirs at the limbs. Nonetheless, plane hydrocarbon distribution is more extensive at the gentle limb than the steep limb.

Structural characteristics and deep-water hydrocarbon accumulation model of the Scotian Basin, Eastern Canada

Commercial hydrocarbon reservoirs have been discovered in shallow-water areas of the Scotian Basin, Eastern Canada. However, knowledge about the structure and hydrocarbon accumulation characteristics of the basin is still insufficient, which constrains the oil and gas exploration in deep-water areas. Based on comprehensive data of magnetic anomalies, seismic survey, and drilling, this study determines the structure characteristics of the Scotian Basin and its hydrocarbon accumulation conditions in deep waters and evaluates the deep-water hydrocarbon exploration potential. The transform faults and basement structures in the northern basin control the sedimentary framework showing thick strata in east and thin strata in west of the basin. The bowl-shaped depression formed by thermal subsidence during the transitional phase and the confined environment (micro basins) caused by salt tectonics provide favorable conditions for the development of source rocks during the depression stage (also referred to as the depression period sequence) of the basin. The progradation of large shelf-margin deltas during the drift phase and steep continental slope provide favorable conditions for the deposition of slope-floor fans on continental margins of the basin. Moreover, the source-reservoir assemblage comprising the source rocks within the depression stage and the turbidite sandstones on the continental margin in the deep waters may form large deep-water turbidite sandstone reservoirs. This study will provide a valuable reference for the deep-water hydrocarbon exploration in the Scotian Basin.

Whole petroleum system and hydrocarbon accumulation model in shallow and medium strata in northern Songliao Basin,NE China

Based on the oil and gas exploration practice in the Songliao Basin,combined with the latest exploration and development data such as seismic,well logging and geochemistry,the basic geological conditions,oil and gas types and distribution characteristics,reservoir-forming dynamics,source-reservoir relationship and hydrocarbon accumulation model of the whole petroleum system in shallow and medium strata in the northern part of Songliao Basin are systematically studied.The shallow-medium strata in northern Songliao Basin have the conditions for the formation of whole petroleum system,with sufficient oil and gas sources,diverse reservoir types and well-developed transport system,forming a whole petroleum system centered on the source rocks of the Cretaceous Qingshankou Formation.Different types of oil and gas resources in the whole petroleum system are correlated with each other in terms of depositional system,lithologic association and physical property changes,and they,to a certain extent,have created the spatial framework with orderly symbiosis of shallow-medium conventional oil reservoirs,tight oil reservoirs and shale oil reservoirs in northern Songliao Basin.Vertically,the resources are endowed as conventional oil above source,shale oil/tight oil within source,and tight oil below source.Horizontally,conventional oil,tight oil,interlayer-type shale oil,and pure shale-type shale oil are developed in an orderly way,from the margin of the basin to the center of the depression.Three hydrocarbon accumulation models are recognized for the whole petroleum system in northern Songliao Basin,namely,buoyancy-driven charging of conventional oil above source,retention of shale oil within source,and pressure differential-driven charging of tight oil below source.

Evaluation of Hydrocarbon Reservoir in the “SIMA” Field of Niger Delta Nigeria from Interpretation of 3D Seismic and Petrophysical Log Data

3D seismic and petrophysical log data interpretation of reservoir sands in “SIMA” Field, onshore Niger Delta has been undertaken in this study to ascertain the reservoir characteristics in terms of favourable structural and petrophysical parameters suitable for hydrocarbon accumulation and entrapment in the field. Horizon and fault interpretation were carried out for subsurface structural delineation. In all, seven faults (five normal and two listric faults) were mapped in the seismic section. These faults were major structure building faults corresponding to the growth and antithetic faults in the area within the well control. The antithetic fault trending northwest-southeast and the normal fault trending northeast-southwest on the structural high in the section act as good trapping mechanisms for hydrocarbon accumulations in the reservoir. From the manual and auto-tracking methods applied, several horizons were identified and mapped. The section is characterized by high amplitude with moderate-to-good continuity reflections appearing parallel to sub-parallel, mostly disturbed by some truncations which are more fault related than lithologic heterogeneity. The southwestern part is, however, characterized by low-to-high or variable amplitude reflections with poor-to-low continuity. Normal faults linked to roll-over anticlines were identified. Some fault truncations were observed due to lithologic heterogeneity. The combination of these faults acts as good traps for hydrocarbon accumulations in the reservoir. Reservoir favourable petrophysical qualities, having average NTG, porosity, permeability and water saturation of 5 m, 0.20423, 1128.219 kD and 0.458 respectively.

Research advances on transfer zones in rift basins and their influence on hydrocarbon accumulation

Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely developed in rift basins and have significance on hydrocarbon accumulation. In this review article, we attempt to summarize recent advances on the types, distance-displacement curves, evolutionary stages and controlling factors of transfer zones in rift basins and their effects on sedimentary systems, reservoir properties, trap formation and hydrocarbon migration. The formation of transfer zones is genetically related to the segmented growth of normal faults. Depending on the degree of interaction between these normal faults, transfer zones in rift basins could be divided into two types: soft-linked and hard-linked, which are further subdivided into transfer slope, oblique anticline, horst and transfer fault based on the combination patterns of normal faults. In general, the development of transfer zones experiences several stages including isolated normal faulting, transfer slope forming, complicating and breaking. During the interaction and growth of segmented normal faults, stress-strain and spatial array of faults, pre-existing basement structures, and mechanical conditions of rocks have a great influence on the location and development processes of transfer zones. A transfer zone is commonly considered as a pathway for conveying sediments from provenance to basin, and it hence exerts an essential control on the distribution of sandbodies. In addition, transfer zone is the area where stresses are concentrated, which facilitates the formation of various types of structural traps, and it is also a favorable conduit for hydrocarbon migration. Consequently, there exists great hydrocarbon potentials in transfer zones to which more attention should be given.

Quantitative prediction model for the depth limit of oil accumulation in the deep carbonate rocks:A case study of Lower Ordovician in Tazhong area of Tarim Basin

With continuous hydrocarbon exploration extending to deeper basins,the deepest industrial oil accumulation was discovered below 8,200 m,revealing a new exploration field.Hence,the extent to which oil exploration can be extended,and the prediction of the depth limit of oil accumulation(DLOA),are issues that have attracted significant attention in petroleum geology.Since it is difficult to characterize the evolution of the physical properties of the marine carbonate reservoir with burial depth,and the deepest drilling still cannot reach the DLOA.Hence,the DLOA cannot be predicted by directly establishing the relationship between the ratio of drilling to the dry layer and the depth.In this study,by establishing the relationships between the porosity and the depth and dry layer ratio of the carbonate reservoir,the relationships between the depth and dry layer ratio were obtained collectively.The depth corresponding to a dry layer ratio of 100%is the DLOA.Based on this,a quantitative prediction model for the DLOA was finally built.The results indicate that the porosity of the carbonate reservoir,Lower Ordovician in Tazhong area of Tarim Basin,tends to decrease with burial depth,and manifests as an overall low porosity reservoir in deep layer.The critical porosity of the DLOA was 1.8%,which is the critical geological condition corresponding to a 100%dry layer ratio encountered in the reservoir.The depth of the DLOA was 9,000 m.This study provides a new method for DLOA prediction that is beneficial for a deeper understanding of oil accumulation,and is of great importance for scientific guidance on deep oil drilling.

Basic principles of the whole petroleum system

This paper expounds the basic principles and structures of the whole petroleum system to reveal the pattern of conventional oil/gas-tight oil/gas-shale oil/gas sequential accumulation and the hydrocarbon accumulation models and mechanisms of the whole petroleum system.It delineates the geological model,flow model,and production mechanism of shale and tight reservoirs,and proposes future research orientations.The main structure of the whole petroleum system includes three fluid dynamic fields,three types of oil and gas reservoirs/resources,and two types of reservoir-forming processes.Conventional oil/gas,tight oil/gas,and shale oil/gas are orderly in generation time and spatial distribution,and sequentially rational in genetic mechanism,showing the pattern of sequential accumulation.The whole petroleum system involves two categories of hydrocarbon accumulation models:hydrocarbon accumulation in the detrital basin and hydrocarbon accumulation in the carbonate basin/formation.The accumulation of unconventional oil/gas is self-containment,which is microscopically driven by the intermolecular force(van der Waals force).The unconventional oil/gas production has proved that the geological model,flow model,and production mechanism of shale and tight reservoirs represent a new and complex field that needs further study.Shale oil/gas must be the most important resource replacement for oil and gas resources of China.Future research efforts include:(1)the characteristics of the whole petroleum system in carbonate basins and the source-reservoir coupling patterns in the evolution of composite basins;(2)flow mechanisms in migration,accumulation,and production of shale oil/gas and tight oil/gas;(3)geological characteristics and enrichment of deep and ultra-deep shale oil/gas,tight oil/gas and coalbed methane;(4)resource evaluation and new generation of basin simulation technology of the whole petroleum system;(5)research on earth system-earth organic rock and fossil fuel system-whole petroleum system.

Main controlling factors and exploration enlightenment of aluminous rock series gas reservoirs in Ordos Basin,NW China

Based on the data of outcrop,core,logging,gas testing,and experiments,the natural gas accumulation and aluminous rock mineralization integrated research was adopted to analyze the controlling factors of aluminous rock series effective reservoirs in the Ordos Basin,NW China,as well as the configuration of coal-measure source rocks and aluminous rock series reservoirs.A natural gas accumulation model was constructed to evaluate the gas exploration potential of aluminous rock series under coal seam in the basin.The effective reservoirs of aluminous rock series in the Ordos Basin are composed of honeycomb-shaped bauxites with porous residual pisolitic and detrital structures,with the diasporite content of greater than 80%and dissolved pores as the main storage space.The bauxite reservoirs are formed under a model that planation controls the material supply,karst paleogeomorphology controls diagenesis,and land surface leaching improves reservoir quality.The hot humid climate and sea level changes in the Late Carboniferous–Early Permian dominated the development of a typical coal-aluminum-iron three-stage stratigraphic structure.The natural gas generated by the extensive hydrocarbon generation of coal-measure source rocks was accumulated in aluminous rock series under the coal seam,indicating a model of hydrocarbon accumulation under the source.During the Upper Carboniferous–Lower Permian,the relatively low-lying area on the edge of an ancient land or island in the North China landmass was developed.The gas reservoirs of aluminous rock series,which are clustered at multiple points in lenticular shape,are important new natural gas exploration fields with great potential in the Upper Paleozoic of North China Craton.

Geological Conditions and Hydrocarbon Accumulation Processes in the Sahul Platform, Northern Bonaparte Basin, Australia

The Sahul Platform where the Sunset-Loxton Shoals and Chuditch gas fields were discovered is located between the Timor Trough to the north and the Malita Graben to the south. These areas are located respectively 440 km and 380 km northwest of Darwin in the northern Bonaparte Basin, Australia. Based on the structural evolution of the northern Bonaparte Basin, data from the wells Loxton Shoals 1, Sunset 1 and Chuditch 1 in the Sahul Platform and Heron 1 in the Malita Graben depocentre, and the Seismic Line N11606 were used to clarify the geological conditions and reconstruct the hydrocarbon accumulation processes in the study area. BasinMod 1-D, 2-D, and 3-D software was used for modeling. The Plover Formation source rock was a poor-to-good hydrocarbon generative potential and reached the middle to late mature oil window in the Sunset-Loxton Shoals field whereas in the Chuditch field, it was an overall fair-to-good hydrocarbon generative potential, and attained the Late mature oil window. The Flamingo, and the Echuca Shoals formations source rocks in the same field were a fair and good hydrocarbon generation potential respectively, and both reached mid-mature oil window. In the Malita Graben depocentre, the Petrel (Frigate) and the Echuca Shoals formations source rocks were a poor-to-very good hydrocarbon generating potential, and had attained wet gas window at the present day. The analyses of organic matter showed that the source rocks in the study area and Malita Graben were gas prone with kerogen types II2 & III and III predominantly. The Middle Jurassic Plover Formation sandstone reservoir in the Sunset-Loxton field was a poor-to-very good quality and potential for gas beds, and it was a very poor-to-very good quality and potential for gas beds in the Chuditch field. The intensities of gas generation and expulsion were more than of oil ones either in the Sahul Platform or in the Malita Graben. The Plover, Petrel (Frigate) and Echuca Shoals formations source rocks in the wells Chuditch 1 and Heron 1, except for the Flamingo Formation in the well Chuditch 1, had higher gas and oil expelling efficiencies than the Plover Formation source rock of the wells in the Sunset-Loxton Shoals field. The hydrocarbon migrated mainly from the Upper Jurassic Frigate Shale source rock in the Malita Graben depocentre (structurally lower) to the Plover Formation sandstone reservoir in the Sunset-Loxton Shoals field during the Late Cretaceous at 66 Ma. In the Chuditch field, the hydrocarbon migration to the Plover Formation sandstone reservoir was initiated during the Late Miocene at 7.5 Ma from the Middle Jurassic Plover Formation source rock in the well Chuditch 1. Nowadays, the main migration pathways are from the southeastward and southward of the Sunset-Loxton Shoals field, and from southward and eastward of the Chuditch field, precisely from the hydrocarbon source kitchens of the Malita Graben depocentre. The traps in the Sahul Platform have been effective to receive the migrated hydrocarbon.