The possibility of the recovery of hydrochloric acid from rare earth (RE) chloride solutions was first experimentally studied by batch vacuum membrane distillation (VMD). The recovery by continuous VMD was also st...The possibility of the recovery of hydrochloric acid from rare earth (RE) chloride solutions was first experimentally studied by batch vacuum membrane distillation (VMD). The recovery by continuous VMD was also studied to devise methods that enabled the operation of VMD setup in a stable condition as well as to increase the membrane-operating life The results indicated that HCl separation with RE by VMD was possible, and the recovery ratio of 80% could be achieved by batch VMD. In continuous VMD, when the temperature of circular solutions, circular rate, and downstream pressure was 62-63℃, 5.4 cm/s, and 9.33 kPa, respectively, the HCl concentration in circular solutions and the processing capacity per membrane area were obtained. The mathematical results were in accordance with the experimental ones.展开更多
This article reports the extraction of zirconium (IV) from aqueous HC1 solution by tri-octyl amine (TOA), Cyanex 921, and their binary mixture using kerosene as the diluent. The effect of some parameters on the ex...This article reports the extraction of zirconium (IV) from aqueous HC1 solution by tri-octyl amine (TOA), Cyanex 921, and their binary mixture using kerosene as the diluent. The effect of some parameters on the extraction of Zr(IV) was investigated such as equilibration time, aqueous phase acidity, extractant molarity, chloride ion concentration, nature of diluents, and temperature. The extraction of Zr(IV) was found to be 99% from 7.5 M HC1 using the mixture of extractants containing 0.1 M TOA and 0.02 M Cyanex 921 in kerosene. Kerosene was found to be the effective diluent for the extraction of Zr(IV) with the binary mixture of TOA and Cyanex 921. The positive enthalpy change and positive entropy change in the binary extraction system show the endothermic process with an increase in entropy. Stripping of Zr(IV) from the loaded organic phase containing the mixture of TOA (0.1 M) and Cyanex 921 (0.02 M) indicates that HNO3 and Na2CO3 are the best stripping agents.展开更多
The effects of La 3+ ion and chelate reagent 8 hydroxyquinoline on the corrosion rate of zinc in hydrochloric acid were investigated by using weight loss method and electrochemical method. It is found that in a ...The effects of La 3+ ion and chelate reagent 8 hydroxyquinoline on the corrosion rate of zinc in hydrochloric acid were investigated by using weight loss method and electrochemical method. It is found that in a specific concentration range of La 3+ ion and 8 hydroxyquinoline, the obvious corrosion inhibition synergism is obtained. The mechanism of corrosion inhibition synergism was discussed on basis of adsorption theory.展开更多
Background:A ruptured hepatocellular carcinoma(HCC)is often fatal.In addition to surgery and transarterial embo?lization,radiofrequency ablation(RFA)might be another option for treating a ruptured HCC.Unfortunately,co...Background:A ruptured hepatocellular carcinoma(HCC)is often fatal.In addition to surgery and transarterial embo?lization,radiofrequency ablation(RFA)might be another option for treating a ruptured HCC.Unfortunately,conven?tional RFA has a limited ablation zone;as such,it is rarely used to treat ruptured tumors.Case presentation:This case was a 60?year?old man who had a large,ruptured HCC in which hydrochloric acid(HCl)?enhanced RFA successfully controlled the bleeding and made the tumor completely necrotic.Conclusion:Considering the effectiveness of HCl?enhanced RFA in achieving hemostasis and tumor ablation,it might be a new option for treating large,ruptured HCCs.展开更多
The equilibrium between the gas-liquid phases of the system of HCl-RECl_3-H_2O was analyzed,and the possibility of hydrochloric acid recovery from rare earth chloride solutions by vacuum membrane distillation (VMD) wa...The equilibrium between the gas-liquid phases of the system of HCl-RECl_3-H_2O was analyzed,and the possibility of hydrochloric acid recovery from rare earth chloride solutions by vacuum membrane distillation (VMD) was experimentally studied in the laboratory scale. The results indicate that increasing initial concentrations of both hydrochloric acid and rare earth increase recovery ratio of hydrochloric acid,and recovery ratio of 80% can be achieved. Concentrated multiple of rare earth shows great influence on recovery ratio,leakage ratio of rare earth is less than 2% generally,and pure acid can be acquired in the permeate side. The two factors,namely flux and leakage ratio,which may determine the future use of VMD were also discussed.展开更多
BACKGROUND To report on the use of percutaneous hydrochloric acid(HCl) enhanced radiofrequency ablation(HRFA) for the treatment of large(maximum diameter ≥5 cm) hepatocellular carcinoma(HCC) in the caudate lobe.CASE ...BACKGROUND To report on the use of percutaneous hydrochloric acid(HCl) enhanced radiofrequency ablation(HRFA) for the treatment of large(maximum diameter ≥5 cm) hepatocellular carcinoma(HCC) in the caudate lobe.CASE SUMMARY Between August 2013 and June 2016, three patients with a large HCC(maximum diameter: 5.0, 5.7, and 8.1 cm) in the caudate lobe were treated by transarterial chemoembolization followed by computer tomography(CT) guided RFA using a monopolar perfusion RF electrode, which was enhanced by local infusion of 10%HCl at 0.2 mL/min(total volume, 3 to 12 mL). The output power of HRFA reached 100 W, and the average ablation time was 39 min(range, 15 to 60 min).Two patients each underwent one session of HRFA and one patient two sessions.After treatment, CT/magnetic resonance imaging showed that all the three lesions were completely ablated. There was no major complication. Two patients had asymptomatic bile duct dilatation. One patient died of tongue cancer 24 mo after ablation. The remaining two patients were alive and no area of enhancement is detected in the caudate lobe at 28 and 60 mo after ablation, respectively.CONCLUSION Percutaneous CT-guided HRFA is safe and efficacious in treating large HCC in the caudate lobe.展开更多
UV-Vis spectroscopy was used to directly determine the concentration of Eu( Ⅱ) during electroreduction of Eu ( Ⅲ ) in hydrochloric acid medium. Electroreduction was carried out in a flow type electrolyzer with g...UV-Vis spectroscopy was used to directly determine the concentration of Eu( Ⅱ) during electroreduction of Eu ( Ⅲ ) in hydrochloric acid medium. Electroreduction was carried out in a flow type electrolyzer with glassy carbon cathode at the constant potential of - 800 mV vs. Ag/AgCl. The effects of oxygen and concentration of hydrochloric acid on the system were investigated. For 0.01 mol· L^-1 hydrochloric acid, calibration curves for Eu (Ⅱ) absorption bands at 248 and 320 nm were constructed. Molar absorption coefficients were estimated to be 2016 and 648 L· mol^-1·cm^-1, respectively. The absorbance strongly decreased with decrease in pH of the solution, whereas concentration of chloride had only a negligible effect.展开更多
The dissolution of carbon steel in 5% HCl in the temperature range of 30~90℃ was inhibited by two organic compounds having the general formula: ClR NH2(CH2)n NH2 RCl where R is a benzyl group. The behaviour of these ...The dissolution of carbon steel in 5% HCl in the temperature range of 30~90℃ was inhibited by two organic compounds having the general formula: ClR NH2(CH2)n NH2 RCl where R is a benzyl group. The behaviour of these inhibitors in acidic medium were investigated using weight loss method, open circuit potential and linear polarization technique. These inhibitors provided satisfactory corrosion inhibition for carbon steel in hydrochloric acid solutions even at higher temperature and acid concentration (10%). The electrochemical results showed that the polarization resistance (Rp) values increased with increasing inhibitor concentration, also the corrosion current decreased and a higher inhibition efficiency was obtained. The protective properties of these two organic inhibitors were attributed to the chemisorption mechanism展开更多
The effect of hydrochloric acid concentration on stainless steel (Fe6956) at temperature range 303 - 333 ± 1 K has been studied using weight loss, thermometric and electrochemical polarization techniques. The cor...The effect of hydrochloric acid concentration on stainless steel (Fe6956) at temperature range 303 - 333 ± 1 K has been studied using weight loss, thermometric and electrochemical polarization techniques. The corrosion rate of the stainless steel was found to be dependent on both temperature variation and acid concentration. The potentiostatic study showed that the active passive transition depends strongly on acid concentration while the weight loss measurements revealed that 2 M HCl at temperature 333 K had an appreciable corrosion rate which corresponds to 14.04 × 10﹣3 reaction number (RN) got from thermometric monitoring. Arrhenius equation and transition state theory were used to calculate kinetic and thermodynamic parameter such as Ea, ΔH* and ΔS*. Results obtained showed that corrosion reaction of Fe6956 in HCl is spontaneous and there is good agreement between the data got from the techniques employed.展开更多
The hydrochloric acid recovery from rare earth chloride solutions by continuous vacuum membrane distillation was first experimentally studied, then material balance of the process was calculated, and the equations whi...The hydrochloric acid recovery from rare earth chloride solutions by continuous vacuum membrane distillation was first experimentally studied, then material balance of the process was calculated, and the equations which mathematically stimulate the process were lastly achieved. The results indicate a given RE concentration in circular solutions means its constant HCl concentration during the continuous VMD process, furthermore, increasing RE concentration in feed solutions increases the processing capacity per membrane of the experimental set-up. When keeping constant RE concentration in feed solutions, increasing RE concentration in circular solutions decreases its HCl concentration, and HCl recovery ratio increases accordingly, however, processing capacity per membrane of the experimental set-up decreases at the same time. The mathematical results are in accordance with experimental results.展开更多
Single phase crystalline cubic boron nitride (cBN) with high yield was prepared by hydrothermal route at low temperature, using hydrochloric acid (HCI) as the promoter. The promotion effect of HCI on the synthesis...Single phase crystalline cubic boron nitride (cBN) with high yield was prepared by hydrothermal route at low temperature, using hydrochloric acid (HCI) as the promoter. The promotion effect of HCI on the synthesis of cBN is briefly discussed.展开更多
Rabbits with the body weight of (2.0 ± 0.5 ) kg were chosen, to study the effects of sustained-release calcium hydroxide and sustained-release hydro- chloric acid on nutrient digestion and absorption of rabbits...Rabbits with the body weight of (2.0 ± 0.5 ) kg were chosen, to study the effects of sustained-release calcium hydroxide and sustained-release hydro- chloric acid on nutrient digestion and absorption of rabbits. The results showed that sustained-release calcium hydroxide promoted digestion and absorption of nutri- ents, especially calcium and crude protein. The digestibility of calcium and crude protein was increased from 89.8% and 93.8% to 41.0% and 65.2%, respec- tively. Sustained-release hydrochloric acid was adverse to digestion and absorption of nutrients, especially calcium and crude protein. The digestibility of calcium and crude protein were decreased from 55.5% and 84.9% to 28.4% and 68.7%, respectively. The promotion effects of sustained-release hydrochloride on diges- tion lasted for 3 -4 d. Therefore, sustained-release calcium hydroxide promoted digestion and absorption of calcium and protein, while digestion and absorption of fat remained at a high level no matter what the condition was. Consequently, increasing the intake of fat would cause over nutrition. However, taking sustained-re- lease hydrochloric acid would reduce nutrient digestion and absorption.展开更多
The inhibitive action of CaSO_4 towards corrosion of aluminium in 1 mol/L HCl has been inveetigated by using fluorometrio and weight loss techniques.The results show that the inhibitor exhibits an outstanding function...The inhibitive action of CaSO_4 towards corrosion of aluminium in 1 mol/L HCl has been inveetigated by using fluorometrio and weight loss techniques.The results show that the inhibitor exhibits an outstanding function of inhibition,especially at higher tempe- ratures,and it was found to be predomiantly of cathodic rate control.Ths mechanism of inhibition and the effect of CdSO_4 on the corrosion kinetics are also discussed.展开更多
ASTM A182 F51 duplex stainless steel with a 50:50 ratio of austenite to ferrite microstructure is a material used in mechanical engineering.Its uses include the manufacturing of equipment and components subject to aci...ASTM A182 F51 duplex stainless steel with a 50:50 ratio of austenite to ferrite microstructure is a material used in mechanical engineering.Its uses include the manufacturing of equipment and components subject to acidification or acid stimulation for oil and gas industries.During acid stimulation or acidification,hydrochloric acid(HCl)solution with concentrations ranging from 5%to 28%(by volume)is injected into the limestone(CaCO3)and dolomite(CaCO3·MgCO3)reservoir rock to restore permeability and consequently increase oil well productivity.Therefore,it is important to use a corrosion inhibitor,such as propargyl alcohol,to prevent or inhibit the aggressive attack of HCl on duplex stainless steel.The present study evaluates the corrosion resistance of ASTM A182 F51 stainless steel using gravimetric(mass loss)and electrochemical(polarization)tests.Studies were completed with and without the addition of 500 and 1,000 mg/L propargyl alcohol in HCl solutions with concentrations of 10%and 15%(by volume)at temperatures of 25,40 and 55°C.The good protection by propargyl alcohol of duplex steel immersed in HCl is observed.展开更多
Response surface methodology (RSM) and Artificial neural network (ANN) were used for the simulation and optimization of galena dissolution in hydrochloric acid. The galena ore was characterized for structure elucidati...Response surface methodology (RSM) and Artificial neural network (ANN) were used for the simulation and optimization of galena dissolution in hydrochloric acid. The galena ore was characterized for structure elucidation using FTIR, SEM and X-ray diffraction spectroscopic techniques and the results indicate that the galena ore exists mainly as lead sulphide (PbS). A feed-forward neural network model with Leverberg-Marquardt back propagating training algorithm was used to predict the response (lead yield). The leaching temperature, acid concentration, solid/liquid ratio, stirring rate and leaching time were defined as input variables, while the percentage yield of lead was labelled as output variable. The multilayer perceptron with architecture of 5-9-1 provided the best performance. All the process variables were found to have significant impact on the response with p-values of 2 of 0.991 and 1.00, respectively. A non-dominated optimal response of 85.25% yield of lead at 343.96 K leaching temperature, 3.11 M hydrochloric acid concentration, 0.021 g/ml solid/liquid ratio, 362.27 rpm stirring speed and 87.37 min leaching time was established as a viable route for reduced material and operating cost using RSM.展开更多
Corrosion of metal components constitutes a major challenge in many engineering systems, with appropriate design, proper material selection, and heat treatment as commonly used control strategies. In this study, the c...Corrosion of metal components constitutes a major challenge in many engineering systems, with appropriate design, proper material selection, and heat treatment as commonly used control strategies. In this study, the corrosion behaviour of heat-treated (annealed, normalised, hardened, and tempered) NST 37-2 steel in three concentrations (1.0, 1.5 and 2.0 M) of hydrochloric acid solution was investigated using weight loss and electrode-potential methods. Results showed that corrosion rate increased with increase in acid concentration. The decreasing order of corrosion resistance was Tempered > Annealed > Normalised > Hardened > Untreated. The surface pictures of the heat-treated and untreated samples showed uniform and pitting corrosion with the latter becoming more pronounced as concentration increased.展开更多
The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and al...The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.展开更多
This study was carried out to investigate the interaction of oxalic acid with hydrochloric acid to attain the better performance for iron dissolution in comparison to absence of oxalic acid. The effects of oxalic acid...This study was carried out to investigate the interaction of oxalic acid with hydrochloric acid to attain the better performance for iron dissolution in comparison to absence of oxalic acid. The effects of oxalic acid on ratio of hydrochloric acid, acid concentration, ratio of liquid to solid, temperature and dissolution time are investigated for the dissolution of Fe and Ti from ilmenite to produce synthetic rutile. The DX7 software basing on an experimental design method with the central composite of response surface design is applied to specify the effects of the parameters and to optimize the leaching process. The optimum condition was determined by analysis of variance (ANOVA), indicating that the ratio of oxalic acid to hydrochloric acid for Fe dissolution and acid concentration for Ti dissolution were the most effective parameters. The results showed that the dissolution of Fe and Ti in 30% (w/w) hydrochloric acid solution was only 48.65% and 5.14%, respectively, while at the same condition and in the presence of oxalic acid with twice the ratio, these values are increased to 78.65% and 12.06%, respectively. The optimum values of parameters were as follows: oxalic acid to hydrochloric acid ratio (2:1), acid concentration (30%), ratio of liquid to solid (10), temperature (160 °C), and dissolution time (3 h). By applying the optimized parameters, Fe and Ti dissolution of 97.15% and 2.8% were predicted by the software with a desirability of 0.745. The results of leaching tests indicated that the Fe and Ti dissolution of 97.58% and 2.43%, were achieved, respectively, which are very close to the predicted value.展开更多
Determination of thirty four trace metal elements in electronic high purity hydrochloric acid by ICP-MS (Standard Condition, Plasma Screen Condition) with membrane desolvation was described. Matrix effects were compen...Determination of thirty four trace metal elements in electronic high purity hydrochloric acid by ICP-MS (Standard Condition, Plasma Screen Condition) with membrane desolvation was described. Matrix effects were compensated by adding rhodium as the internal standard. Detection limits is 0.1 to 100 ng/L; the recovery of the method is 90%-110%. Long term RSD was less than 5%. The results from ICP and ICP-MS are correspondent. ICP-MS improves the accuracy and efficiency of analyses.展开更多
文摘The possibility of the recovery of hydrochloric acid from rare earth (RE) chloride solutions was first experimentally studied by batch vacuum membrane distillation (VMD). The recovery by continuous VMD was also studied to devise methods that enabled the operation of VMD setup in a stable condition as well as to increase the membrane-operating life The results indicated that HCl separation with RE by VMD was possible, and the recovery ratio of 80% could be achieved by batch VMD. In continuous VMD, when the temperature of circular solutions, circular rate, and downstream pressure was 62-63℃, 5.4 cm/s, and 9.33 kPa, respectively, the HCl concentration in circular solutions and the processing capacity per membrane area were obtained. The mathematical results were in accordance with the experimental ones.
文摘This article reports the extraction of zirconium (IV) from aqueous HC1 solution by tri-octyl amine (TOA), Cyanex 921, and their binary mixture using kerosene as the diluent. The effect of some parameters on the extraction of Zr(IV) was investigated such as equilibration time, aqueous phase acidity, extractant molarity, chloride ion concentration, nature of diluents, and temperature. The extraction of Zr(IV) was found to be 99% from 7.5 M HC1 using the mixture of extractants containing 0.1 M TOA and 0.02 M Cyanex 921 in kerosene. Kerosene was found to be the effective diluent for the extraction of Zr(IV) with the binary mixture of TOA and Cyanex 921. The positive enthalpy change and positive entropy change in the binary extraction system show the endothermic process with an increase in entropy. Stripping of Zr(IV) from the loaded organic phase containing the mixture of TOA (0.1 M) and Cyanex 921 (0.02 M) indicates that HNO3 and Na2CO3 are the best stripping agents.
文摘The effects of La 3+ ion and chelate reagent 8 hydroxyquinoline on the corrosion rate of zinc in hydrochloric acid were investigated by using weight loss method and electrochemical method. It is found that in a specific concentration range of La 3+ ion and 8 hydroxyquinoline, the obvious corrosion inhibition synergism is obtained. The mechanism of corrosion inhibition synergism was discussed on basis of adsorption theory.
基金supported by grants from the National Natural Science Foundation of China (No. 81371652)the Science and Technology Planning Project of Guangdong Province (No. 2012B031800120)
文摘Background:A ruptured hepatocellular carcinoma(HCC)is often fatal.In addition to surgery and transarterial embo?lization,radiofrequency ablation(RFA)might be another option for treating a ruptured HCC.Unfortunately,conven?tional RFA has a limited ablation zone;as such,it is rarely used to treat ruptured tumors.Case presentation:This case was a 60?year?old man who had a large,ruptured HCC in which hydrochloric acid(HCl)?enhanced RFA successfully controlled the bleeding and made the tumor completely necrotic.Conclusion:Considering the effectiveness of HCl?enhanced RFA in achieving hemostasis and tumor ablation,it might be a new option for treating large,ruptured HCCs.
文摘The equilibrium between the gas-liquid phases of the system of HCl-RECl_3-H_2O was analyzed,and the possibility of hydrochloric acid recovery from rare earth chloride solutions by vacuum membrane distillation (VMD) was experimentally studied in the laboratory scale. The results indicate that increasing initial concentrations of both hydrochloric acid and rare earth increase recovery ratio of hydrochloric acid,and recovery ratio of 80% can be achieved. Concentrated multiple of rare earth shows great influence on recovery ratio,leakage ratio of rare earth is less than 2% generally,and pure acid can be acquired in the permeate side. The two factors,namely flux and leakage ratio,which may determine the future use of VMD were also discussed.
基金the National Natural Science Foundation of China,No.81771955
文摘BACKGROUND To report on the use of percutaneous hydrochloric acid(HCl) enhanced radiofrequency ablation(HRFA) for the treatment of large(maximum diameter ≥5 cm) hepatocellular carcinoma(HCC) in the caudate lobe.CASE SUMMARY Between August 2013 and June 2016, three patients with a large HCC(maximum diameter: 5.0, 5.7, and 8.1 cm) in the caudate lobe were treated by transarterial chemoembolization followed by computer tomography(CT) guided RFA using a monopolar perfusion RF electrode, which was enhanced by local infusion of 10%HCl at 0.2 mL/min(total volume, 3 to 12 mL). The output power of HRFA reached 100 W, and the average ablation time was 39 min(range, 15 to 60 min).Two patients each underwent one session of HRFA and one patient two sessions.After treatment, CT/magnetic resonance imaging showed that all the three lesions were completely ablated. There was no major complication. Two patients had asymptomatic bile duct dilatation. One patient died of tongue cancer 24 mo after ablation. The remaining two patients were alive and no area of enhancement is detected in the caudate lobe at 28 and 60 mo after ablation, respectively.CONCLUSION Percutaneous CT-guided HRFA is safe and efficacious in treating large HCC in the caudate lobe.
基金Project supported by Japan Society for the Promotion of Science (JSPS)
文摘UV-Vis spectroscopy was used to directly determine the concentration of Eu( Ⅱ) during electroreduction of Eu ( Ⅲ ) in hydrochloric acid medium. Electroreduction was carried out in a flow type electrolyzer with glassy carbon cathode at the constant potential of - 800 mV vs. Ag/AgCl. The effects of oxygen and concentration of hydrochloric acid on the system were investigated. For 0.01 mol· L^-1 hydrochloric acid, calibration curves for Eu (Ⅱ) absorption bands at 248 and 320 nm were constructed. Molar absorption coefficients were estimated to be 2016 and 648 L· mol^-1·cm^-1, respectively. The absorbance strongly decreased with decrease in pH of the solution, whereas concentration of chloride had only a negligible effect.
文摘The dissolution of carbon steel in 5% HCl in the temperature range of 30~90℃ was inhibited by two organic compounds having the general formula: ClR NH2(CH2)n NH2 RCl where R is a benzyl group. The behaviour of these inhibitors in acidic medium were investigated using weight loss method, open circuit potential and linear polarization technique. These inhibitors provided satisfactory corrosion inhibition for carbon steel in hydrochloric acid solutions even at higher temperature and acid concentration (10%). The electrochemical results showed that the polarization resistance (Rp) values increased with increasing inhibitor concentration, also the corrosion current decreased and a higher inhibition efficiency was obtained. The protective properties of these two organic inhibitors were attributed to the chemisorption mechanism
文摘The effect of hydrochloric acid concentration on stainless steel (Fe6956) at temperature range 303 - 333 ± 1 K has been studied using weight loss, thermometric and electrochemical polarization techniques. The corrosion rate of the stainless steel was found to be dependent on both temperature variation and acid concentration. The potentiostatic study showed that the active passive transition depends strongly on acid concentration while the weight loss measurements revealed that 2 M HCl at temperature 333 K had an appreciable corrosion rate which corresponds to 14.04 × 10﹣3 reaction number (RN) got from thermometric monitoring. Arrhenius equation and transition state theory were used to calculate kinetic and thermodynamic parameter such as Ea, ΔH* and ΔS*. Results obtained showed that corrosion reaction of Fe6956 in HCl is spontaneous and there is good agreement between the data got from the techniques employed.
文摘The hydrochloric acid recovery from rare earth chloride solutions by continuous vacuum membrane distillation was first experimentally studied, then material balance of the process was calculated, and the equations which mathematically stimulate the process were lastly achieved. The results indicate a given RE concentration in circular solutions means its constant HCl concentration during the continuous VMD process, furthermore, increasing RE concentration in feed solutions increases the processing capacity per membrane of the experimental set-up. When keeping constant RE concentration in feed solutions, increasing RE concentration in circular solutions decreases its HCl concentration, and HCl recovery ratio increases accordingly, however, processing capacity per membrane of the experimental set-up decreases at the same time. The mathematical results are in accordance with experimental results.
基金This work was supported by the National Natural Science Foundation of China(No.20473048,90206042)Science&Technology Research Program of Ministry of Education(No.104110,305010)Natural Science Foundation of Shandong Province(Y2006B24).
文摘Single phase crystalline cubic boron nitride (cBN) with high yield was prepared by hydrothermal route at low temperature, using hydrochloric acid (HCI) as the promoter. The promotion effect of HCI on the synthesis of cBN is briefly discussed.
基金Supported by National Natural Science Foundation of China(21576055)
文摘Rabbits with the body weight of (2.0 ± 0.5 ) kg were chosen, to study the effects of sustained-release calcium hydroxide and sustained-release hydro- chloric acid on nutrient digestion and absorption of rabbits. The results showed that sustained-release calcium hydroxide promoted digestion and absorption of nutri- ents, especially calcium and crude protein. The digestibility of calcium and crude protein was increased from 89.8% and 93.8% to 41.0% and 65.2%, respec- tively. Sustained-release hydrochloric acid was adverse to digestion and absorption of nutrients, especially calcium and crude protein. The digestibility of calcium and crude protein were decreased from 55.5% and 84.9% to 28.4% and 68.7%, respectively. The promotion effects of sustained-release hydrochloride on diges- tion lasted for 3 -4 d. Therefore, sustained-release calcium hydroxide promoted digestion and absorption of calcium and protein, while digestion and absorption of fat remained at a high level no matter what the condition was. Consequently, increasing the intake of fat would cause over nutrition. However, taking sustained-re- lease hydrochloric acid would reduce nutrient digestion and absorption.
文摘The inhibitive action of CaSO_4 towards corrosion of aluminium in 1 mol/L HCl has been inveetigated by using fluorometrio and weight loss techniques.The results show that the inhibitor exhibits an outstanding function of inhibition,especially at higher tempe- ratures,and it was found to be predomiantly of cathodic rate control.Ths mechanism of inhibition and the effect of CdSO_4 on the corrosion kinetics are also discussed.
文摘ASTM A182 F51 duplex stainless steel with a 50:50 ratio of austenite to ferrite microstructure is a material used in mechanical engineering.Its uses include the manufacturing of equipment and components subject to acidification or acid stimulation for oil and gas industries.During acid stimulation or acidification,hydrochloric acid(HCl)solution with concentrations ranging from 5%to 28%(by volume)is injected into the limestone(CaCO3)and dolomite(CaCO3·MgCO3)reservoir rock to restore permeability and consequently increase oil well productivity.Therefore,it is important to use a corrosion inhibitor,such as propargyl alcohol,to prevent or inhibit the aggressive attack of HCl on duplex stainless steel.The present study evaluates the corrosion resistance of ASTM A182 F51 stainless steel using gravimetric(mass loss)and electrochemical(polarization)tests.Studies were completed with and without the addition of 500 and 1,000 mg/L propargyl alcohol in HCl solutions with concentrations of 10%and 15%(by volume)at temperatures of 25,40 and 55°C.The good protection by propargyl alcohol of duplex steel immersed in HCl is observed.
文摘Response surface methodology (RSM) and Artificial neural network (ANN) were used for the simulation and optimization of galena dissolution in hydrochloric acid. The galena ore was characterized for structure elucidation using FTIR, SEM and X-ray diffraction spectroscopic techniques and the results indicate that the galena ore exists mainly as lead sulphide (PbS). A feed-forward neural network model with Leverberg-Marquardt back propagating training algorithm was used to predict the response (lead yield). The leaching temperature, acid concentration, solid/liquid ratio, stirring rate and leaching time were defined as input variables, while the percentage yield of lead was labelled as output variable. The multilayer perceptron with architecture of 5-9-1 provided the best performance. All the process variables were found to have significant impact on the response with p-values of 2 of 0.991 and 1.00, respectively. A non-dominated optimal response of 85.25% yield of lead at 343.96 K leaching temperature, 3.11 M hydrochloric acid concentration, 0.021 g/ml solid/liquid ratio, 362.27 rpm stirring speed and 87.37 min leaching time was established as a viable route for reduced material and operating cost using RSM.
文摘Corrosion of metal components constitutes a major challenge in many engineering systems, with appropriate design, proper material selection, and heat treatment as commonly used control strategies. In this study, the corrosion behaviour of heat-treated (annealed, normalised, hardened, and tempered) NST 37-2 steel in three concentrations (1.0, 1.5 and 2.0 M) of hydrochloric acid solution was investigated using weight loss and electrode-potential methods. Results showed that corrosion rate increased with increase in acid concentration. The decreasing order of corrosion resistance was Tempered > Annealed > Normalised > Hardened > Untreated. The surface pictures of the heat-treated and untreated samples showed uniform and pitting corrosion with the latter becoming more pronounced as concentration increased.
文摘The influence of hydrochloric or sulphuric acid treatment on the electro-physical properties of superthin basalt fiber (STBF) made from Armenian basalt rocks was studied. Specific electric resistance for direct and alternating currents, dielectric parameters of ε, and ε,, were measured. It is shown that specific resistance and dielectric parameters of super-thin basalt fiber change essentially after hydrochloric or sulphuric acid treatment. The temperature dependences of these parameters were studied, too, and their non–monotonic behavior was observed. The probable variation of mentioned STBF parameters is explained by different water absorption capacity of pores as a result of acid treatment.
文摘This study was carried out to investigate the interaction of oxalic acid with hydrochloric acid to attain the better performance for iron dissolution in comparison to absence of oxalic acid. The effects of oxalic acid on ratio of hydrochloric acid, acid concentration, ratio of liquid to solid, temperature and dissolution time are investigated for the dissolution of Fe and Ti from ilmenite to produce synthetic rutile. The DX7 software basing on an experimental design method with the central composite of response surface design is applied to specify the effects of the parameters and to optimize the leaching process. The optimum condition was determined by analysis of variance (ANOVA), indicating that the ratio of oxalic acid to hydrochloric acid for Fe dissolution and acid concentration for Ti dissolution were the most effective parameters. The results showed that the dissolution of Fe and Ti in 30% (w/w) hydrochloric acid solution was only 48.65% and 5.14%, respectively, while at the same condition and in the presence of oxalic acid with twice the ratio, these values are increased to 78.65% and 12.06%, respectively. The optimum values of parameters were as follows: oxalic acid to hydrochloric acid ratio (2:1), acid concentration (30%), ratio of liquid to solid (10), temperature (160 °C), and dissolution time (3 h). By applying the optimized parameters, Fe and Ti dissolution of 97.15% and 2.8% were predicted by the software with a desirability of 0.745. The results of leaching tests indicated that the Fe and Ti dissolution of 97.58% and 2.43%, were achieved, respectively, which are very close to the predicted value.
文摘Determination of thirty four trace metal elements in electronic high purity hydrochloric acid by ICP-MS (Standard Condition, Plasma Screen Condition) with membrane desolvation was described. Matrix effects were compensated by adding rhodium as the internal standard. Detection limits is 0.1 to 100 ng/L; the recovery of the method is 90%-110%. Long term RSD was less than 5%. The results from ICP and ICP-MS are correspondent. ICP-MS improves the accuracy and efficiency of analyses.