Evaluation of the treatment effect of rear slope cutting on hydrodynamic pressure landslides:A case study

After the impoundment of the Three Gorges Reservoir,some huge ancient landslides were reactivated and deformed,showing typical hydrodynamic pressure landslide characteristics.The Baishuihe landslide was a typical hydrodynamic pressure landslide.The management department conducted slope cutting treatments from 2018 to 2019.To evaluate the treatment effect of rear slope cutting,this study analyzed the data of the surface deformation survey and field monitoring over the past 20 years and the characteristics of the reservoir water-triggered Baishuihe landslide deformation,and calculated the seepage field,displacement field,and stability coefficient before and after landslide treatment.The results showed that the deformation of the Baishuihe landslide was primarily related to a decrease in the reservoir water level.Owing to the poor permeability of the landslide soil,the decrease in the reservoir water level produced a seepage force pointing to the outside of the landslide body,leading to the step deformation of the landslide displacement.The landslide was treated by rear slope cutting,and the“step”deformation of the landslide disappeared after treatment.The hydrodynamic pressure caused by the change in reservoir water after cutting the slope did not disappear.However,as the slope cutting greatly reduced the overall sliding force of the landslide,its stability was greatly improved.Notably,high stability can still be ensured under extreme rainfall after treatment.Slope cutting is effective for treating hydrodynamic pressure landslides.This study can provide effective technical support for the treatment of reservoir landslides.

Vertical 2D Modeling of Free Surface Flow with Hydrodynamic Pressure Using SIMPLE Arithmetic in σ Coordinates

A numerical model for shallow water flow has been developed based on the unsteady Reynolds-averaged Navier-Stokes equations with the hydrodynamic pressure instead of hydrostatic pressure assumption. The equations are transformed into the σ-coordinate system and the eddy viscosity is calculated with the standard k-ε turbulence model. The control volume method is used to discrete the equations, and the boundary conditions at the bed for shallow water models only include vertical diffusion terms expressed with wall functions. And the semi-implicit method for pressure linked equation arithmetic is adopted to solve the equations. The model is applied to the 2D vertical plane flow of a current over two steep-sided trenches for which experiment data are available for comparison and good agreement is obtained. And the model is used to predicting the flow in a channel with a steep-sided submerged breakwater at the bottom, and the streamline is drawn.

Numerical Analysis of Hydrodynamic Pressure Induced by Fluid-Solid Impact

As a further development of the authors' work (Huang and Qian, 1993), in this paper a new numerical method based on the time domain boundary element technique is proposed for solving fluid-solid coupling problems, in which a rigid body impacts normally on the calm surface of a half-space fluid. A fundamental solution to the half-space potential flow problem is first derived with the method of images. Then, an equivalent boundary integral equation in the Laplace transform domain is established by means of Green's second identity. Through the inverse Laplace transform and discretization in both time and boundary of the fluid region, the numerical calculation for the problem under consideration has been carried out. Several examples demonstrate that the present method is more efficient than existing ones, from which it is also seen that the shape of the impacting body has a considerable effect on the total impact force.

Experimental study on the applicability of Westergaard＇s formula for calculating earthquake-induced hydrodynamic pressure in small lake

Moraine-dammed lake outbursts usually threaten highways, railways, and key facilities in alpine regions. The varying amplitudes and distribution of hydrodynamic pressures significantly affect the stability of the dam. We utilize a shaking table to investigate the development of hydrodynamic pressure caused by different sinusoidal waves and seismic Wolong wave. A series of shaking table tests indicate that the hydrodynamic pressure varia- tion significantly follows seismic acceleration wave motion. The maximum hydrodynamic pressures calculated by Westergaard＇s equation are compared with the experi- mental values under different waves. It is shown that the Westergaard＇s values are lower than the experimental ones under the sinusoidal waves. However, the Westergaard＇s method is able to predict the earthquake-induced hydro- dynamic pressure caused by Wolong wave in small lake with desirable accuracy.

Study on moisture performance of cement stabilized gravel under hydrodynamic pressure

The start point in this paper is dynamic load damage caused by hydrodynamic pressure to the inside void of cement stabilized macadam base considering the affect of gradation type,testing time and cracking simulation.Then the moisture damage rule of cement stabilized macadam was investigated in the lab by using the hydrodynamic pressure simulation device and testing system.Test results shows that the cement stabilized macadam with dense framework structure has better moisture-resistant performance than mixtures with suspend-dense structure.And the strength deterioration is just one-third of origin one when crack in base is loaded by hydrodynamic pressure.

Influence of Hydrodynamic Pore Pressure Damage on the Performance of Hot-Mixed Renewable Asphalt Mixture

For evaluating the water stability of hot-mixed renewable asphalt mixture(HRM),the traditional methods are all tested under still water conditions.Except for damage in still water conditions,the hydrodynamic pore pressure generated by the tire driving on the surface water has a great impact.Thus,the RAP contents of the HRMs were designed at 0%,30%,45%and 60%with AC-25 gradation.Then,the self-designed evaluation methods of water stability and dynamic modulus were studied.Finally,the mechanism of the influence of hydrodynamic pore pressure damage on HRMs was studied.The results show that the water stability of HRM containing 30%RAP is equivalent to that of 45%RAP,and the water stability of HRM containing 60%RAP decreases significantly.The Contabro test after MIST treatment can be used as an evaluation method for hydrodynamic pore pressure damage on HRM.Low-speed,heavy-load traffic and larger RAP content have greater damage to the mixture after hydrodynamic pore pressure damage.The performance differences between the aged bitumen and pure bitumen,as well as the aged minerals and new minerals,are continuing to be enlarged in hydrodynamic pore pressure conditions,finally affecting the water stability and dynamic modulus of the HRMs.

Fractured rock mass hydraulic fracturing under hydrodynamic and hydrostatic pressure joint action

According to the stress state of the crack surface, crack rock mass can be divided into complex composite tensile-shear fracture and composite compression-shear fracture from the perspective of fracture mechanics. By studying the hydraulic fracturing effect of groundwater on rock fracture, the tangential friction force equation of hydrodynamic pressure to rock fracture is deduced. The hydraulic fracturing of hydrostatic and hydrodynamic pressure to rock fracture is investigated to derive the equation of critical pressure when the hydraulic fracturing effect occurs in the rock fracture. Then, the crack angle that is most prone to hydraulic fracturing is determined. The relationships between crack direction and both lateral pressure coefficient and friction angle of the fracture surface are analyzed. Results show that considering the joint effect of hydrodynamic and hydrostatic pressure, the critical pressure does not vary with the direction of the crack when the surrounding rock stationary lateral pressure coefficient is equal to 1.0. Under composite tensile-shear fracture, the crack parallel to the direction of the main stress is the most prone to hydraulic fracturing. Under compression-shear fracture, the hydrodynamic pressure resulting in the most dangerous crack angle varies at different lateral pressure coefficients; this pressure decreases when the friction angle of the fracture surface increases. By referring to the subway tunnel collapse case, the impact of fractured rock mass hydraulic fracturing generated by hydrostatic and hydrodynamic pressure joint action is calculated and analyzed.

Analytical Solution and Simplified Formula for Added Mass of Horizontal and Vertical Motions of Truncated Cylinders Under Earthquake Action

This paper investigates the hydrodynamic characteristics of floating truncated cylinders undergoing horizontal and vertical motions due to earthquake excitations in the finite water depth.The governing equation of the hydrodynamic pressure acting on the cylinder is derived based on the radiation theory with the inviscid and incompressible assumptions.The governing equation is solved by using the method of separating variables and analytical solutions are obtained by assigning reasonable boundary conditions.The analytical result is validated by a numerical model using the exact artificial boundary simulation of the infinite water.The main variation and distribution characteristics of the hydrodynamic pressure acting on the side and bottom of the cylinder are analyzed for different combinations of wide-height and immersion ratios.The added mass coefficient of the cylinder is calculated by integrating the hydrodynamic pressure and simplified formulas are proposed for engineering applications.The calculation results show that the simplified formulas are in good agreement with the analytical solutions.

Calculation and Experiment for Dynamic Response of Bridge in Deep Water Under Seismic Excitation

The fluid-structure interaction under seismic excitation is very complicated, and thus the damage identification of the bridge in deep water is the key technique to ensure the safe service. Based on nonlinear Morison equation considering the added mass effect and the fluid-structure interaction effect, the effect of hydrodynamic pressure on the structure is analyzed. A series of underwater shaking table tests are conducted in the air and in water. The dynamic characteristics affected by hydrodynamic pressure are discussed and the distribution of hydrodynamic pressure is also analyzed. In addition, the damage of structure is distinguished through the natural frequency and the difference of modal curvature, and is then compared with the test results. The numerical simulation and test of this study indicate that the effect of hydrodynamic pressure on the structure should not be neglected. It is also found that the presence of the damage, the location of the damage and the degree of the severity can be judged through the variation of structure frequency and the difference of modal curvature.

Dynamic Analysis of A 5-MW Tripod Offshore Wind Turbine by Considering Fluid–Structure Interaction

Fixed offshore wind turbines usually have large underwater supporting structures. The fluid influences the dynamic characteristics of the structure system. The dynamic model of a 5-MW tripod offshore wind turbine considering the pile-soil system and fluid structure interaction （FSI） is established, and the structural modes in air and in water are obtained by use of ANSYS. By comparing low-order natural frequencies and mode shapes, the influence of sea water on the free vibration characteristics of offshore wind turbine is analyzed. On basis of the above work, seismic responses under excitation by E1-Centro waves are calculated by the time-history analysis method. The results reveal that the dynamic responses such as the lateral displacement of the foundation and the section bending moment of the tubular piles increase substantially under the influence of the added-mass and hydrodynamic pressure of sea water. The method and conclusions presented in this paper can provide a theoretical reference for structure design and analysis of offshore wind turbines fixed in deep seawater.

Research of air-cushion isolation effects on high arch dam reservoir

A three-dimensional （3D） finite element model of air-cushion isolated arch dam is presented with the nonlinear gas-liquid-solid multi-field dynamic coupling effect taken into account.In this model,the displacement formulation in Lagrange method,pressure formulation in Euler method,nonlinear contact model based on Coulomb friction law are applied to the air-cushion,reservoir and contraction joint domain,respectively.The dynamic response of Jinping I arch dam with a height of 305 m is analyzed using the seismic records of the Wenchuan Earthquake in 2008.Numerical results show that the air-cushion isolation reduces significantly the hydrodynamic pressure as well as the opening width for the contraction joints of high arch dam.

Investigation of Coolant Fluid through Grinding Zone in High-Speed Precision Grinding

In the grinding process,grinding fluid is delivered for the purposes of chip flushing,cooling,lubrication,and chemical protection of the work surface.Due to the high-speed rotation of the grinding wheel,a boundary layer of air forms around the grinding wheel and moves most of the grinding fluid away from the grinding zone.Hence,the conventional method of delivering coolant fluid that floods delivery with high fluid pressure and nozzle fluid rare supply coolant fluid to achieve high performance grinding.The flood grinding typically delivering large volumes of grinding fluid is ineffective,especially under high speed grinding conditions.In the paper,a theoretical model is presented for flow of grinding fluid through the grinding zone in high-speed precision grinding.The model shows that the flow rate through the grinding zone between the wheel and the workpiece surface not only depends on wheel porosity and wheel speed,but also depends on nozzle volumetric flow rate and fluid jet velocity.Furthermore,the model is tested by a surface grinding machine in order to correlate between experiment and theory.Consequently,the useful flow-rate model is found to give a good agreement with the experimental results and the model can well forecast the useful flow-rate in high-speed precision grinding.

Effect of fissure water on mechanical characteristics of rock mass

In view of the effect of fissure water in fractured rock mass on the strength of rock mass in engineering projects, we pre-pared specimens of cement mortar to simulate saturated rock mass with continuous fractures of different slope angles. By exerting static and dynamic loads on the specimens, the mechanical characteristics of rock mass with fissure water under these loads can be analyzed. Our experimental results indicate that the static compressive strength of saturated fractured rock mass is related to the slope angle. The lowest compressive strength of fractured rock mass occurs when the slope angle is 45°, while the highest strength occurs when the specimen has no fractures. Fissure water can weaken the strength of rock mass. The softening coefficient does not vary with the slope angle and type of load. The hydrodynamic pressure of fractured rock mass gradually increases with an increase in dynamic load. For a 0° slope angle, the hydrodynamic pressure reaches its highest level. When the slope angle is 90°, the hydro-dynamic pressure is the lowest.

An Experimental Investigation on Wave Loading on a Platform Mat

Overall wave loading and local hydrodynamic pressure distributions on a platform mat in regular waves for shallow waters are experimentally investigated in order to examine the severity of the nonlinear effects and shallow water effects. Wave focusing phenomenon is observed in the tests. The measured results may also provide a comparison basis for the theoretical development to consider the nonlinear interaction between waves and viscous flow by introducing viscosity into wave theories.

Experimental study on the dynamic response of a 3-D wedge under asymmetric impact

Water entry problems represent complex multiphase flows involving air,water,and structure interaction,occurring rapidly in rough seas,and potentially effecting structural integrity of floating structures.This paper experimentally investigates asymmetric slamming loads acting on a 3-D elastic wedge section.The specimen,featuring two different bottom plates(stiffened and unstiffened),each 4 mm thick,aims to assess the effect of structural stiffness on dynamic loads.The experiments are conducted at different drop heights of 25 cm and 50 cm and varying heel angles from 5°to 25°.The paper describes the experimental conditions,including wedge geometry,material properties,and the test plan.The study explores the influence of heel angle on impact acceleration,revealing an increase in peak acceleration with a higher inclination angle,particularly in the vertical direction.Additionally,the hydrodynamic pressure resulting from asymmetric slamming is presented.The pressure results analyzed and compared at different locations along the length of the wedge.The experimental findings indicate that,despite the leeward side(stiffened)experiencing a smaller hydrodynamic load,the heel angle significantly affects pressure results on the windward side(unstiffened),leading to a more pronounced dynamic response.The time history of pressure results emphasizes the effect of elastic vibrations,particularly noticeable on the unstiffened bottom plate.This study contributes to a deeper understanding of asymmetric slamming on aluminum structures,facilitating the enhancement of mathematical models and the validation of numerical simulations.

Neural Network Prediction Model for Ship Hydraulic Pressure Signal Under Wind Wave Background

The ship hydraulic pressure signal is one of the important characters for the target detection and recognition. At present, most of the researches on the detection focus on the ways in the time domain. The ways are usually invalid in the large wind wave background. In order to solve the problem efficiently, we present an effectual way to detect the ship using the ship hydraulic pressure signal. Firstly, the signature in the proposed method is decomposed by wavelet-transform technique and reconstructed at the low-frequency region. Then,a predictive model is set up by using the radial basis function(RBF) neural network. Finally, the signature predictive error is regarded as the testing signal which can be used to judge whether the target exists or does not.The practical result shows that the method can improve the signal to noise ratio(SNR) obviously.

Effects of the plenum chamber volume and distributor geometry on fluidized bed hydrodynamics

Most hydrodynamic fluidized bed models, including CFD codes, neglect any effects of the plenum chamber volume. Experiments were performed in a 0.13 m ID fluidization column to determine plenum chamber volume effects on fluidized bed hydrodynamics for FCC and glass particles. Two low-pressure-drop distributors were used, one with a single orifice, and the other with 33 orifices and the same total open area as the single orifice. The results show two peaks in the frequency spectra for the single-orifice distributor, one representing bubble eruption at the bed surface and the other of higher frequency corresponding to the bubbling frequency at the distributor. The latter decreased slightly with increasing plenum volume and with increasing bed depth. For the multi-orifice distributor, broad frequency spectra from pressure measurements became narrower and moved towards higher frequency with decreasing plenum volume.

Time-domain floater stress analysis for a floating wind turbine

There are increasing focuses on developing cost-effective floating wind turbines,for which efficient stress analysis methods are needed for floater structural design.Most of the today’s studies focus on global analysis methods in which the floater is assumed as a rigid body or multiple rigid bodies and the stress distributions in the floater cannot be directly obtained.As part of the COWI Fonden funded EMULF project,a summary about the methodology,the numerical modeling procedure and the verification for stress response analysis of a semi-submersible floater for a 15MW wind turbine is presented.This analy-sis procedure includes the regeneration of the hydrodynamic pressure loads on the external wet surface of the floater due to wave diffraction,radiation and hydrostatic pressure change,and the application of these pressure loads,together with the time-varying gravity due motions,the inertial loads and the forces/moments at the boundaries(i.e.tower bottom and mooring line fairleads)of the floater to obtain the deformation and the stresses of the floater in the time domain.The analysis procedure is imple-mented in a developed MATLAB code and the DNV software package.The importance of the different hydrodynamic pressure components was discussed considering representative sea states.A verification of the obtained stress time series and statistics using this method against the regeneration from a linear frequency-domain approach was made considering irregular wave actions only,and a very good agree-ment was obtained.The developed methodology can provide an efficient solution for structural design analysis of floating wind turbines.

Simulation analysis theory and experimental verification of air-cushion isolation control of high concrete dams

To focus on the key scientific problem of process control of dynamic catastrophe of high dams,presented for the first time are the modelling theory of liquid-gas-solid tri-phase coupling of the air-cushion isolation control of high dams and its numerical simulation method,and theoretical description of the complicated dynamics problem of the tri-phase coupling-thermodynamics state-material-contact bi-nonlinearity,as well as the simulation analysis of the key effects of dynamic catastrophe of the air-cushion isolated high dam engineering.The analytic solution of plane-wave with rigid-dam body was created.The simulation comparison of dynamic catastrophe processes of 305 m Jinping arch dam with and without seismic control was carried out,and the results were basically in agreement with that obtained from the large shaking table tests,and verify each other.The entire air-chamber and optimized air-cushion with varying thickness were presented to develop a optimization method.The large shaking table tests of the isolated dam model,which is satisfied with the basic dynamic similarity relations,were performed for the first time.The test data seemed to be convincing and were in agreement with the dynamic simulation results of the tested model,thereby providing an experimental verification to the simulation theory and method.The combination experiments of theoretical model and physical model demonstrated that the hydrodynamic pressure of high arch dams can be reduced by more than 70% as well as the first and third principle stresses of the dam body reduced by more than 20%-30%,thereby the global anti-seismic capacity of the high dam being improved significantly.The results have shown that the air-cushion isolation is the prior developing direction of structural control technology of high concrete dams.

Hydroelastic analysis of water entry of deformable spheres

This paper presents a numerical study of the hydroelastic coupling during the free-surface water entry of deformable spheres of different material densities.The focus is on the hydrodynamic forces,the stress loads,the sphere deformations,the wetted areas of the sphere and the cavity dynamics,including the impacting of the elastic spheres and the hydroelastic coupled behaviors in the free surface flows.It is shown that the elastic wave propagation in the sphere scales with the sphere density.For elastic spheres immersed in the water,the variation of the sphere deformations and its energy transformation mechanism are discussed.From the contact point positions of the cavity,it can be seen that the wetted area of the sphere is closely related with the sphere deformation.The first deformation cycle is a turning point in the relation between the wetted area and the sphere density.Based on the map of m*−ηsummarized in this work,the influence of the sphere deformation on the shape of the cavity can be roughly predicted from the material properties and the impact conditions.