Amorphous Ti_(0.88)Ni_(1.00) and Ti_(1.69)Ni_(1.00) alloy films are prepared by means of ion beam sputtering using TiNi and Ti_2Ni alloy targets, respectively. Their hydrogen absorption properties are investigated by ...Amorphous Ti_(0.88)Ni_(1.00) and Ti_(1.69)Ni_(1.00) alloy films are prepared by means of ion beam sputtering using TiNi and Ti_2Ni alloy targets, respectively. Their hydrogen absorption properties are investigated by a galvanostatic method. The results show th the discharge capacity of the Ti_(1.69)Ni_(1.00) sample is higher than that of the Ti_(0.88)Ni_(1.00) sample. And the film electrodes have high durability and long cycle life.展开更多
In this work,the microstructure,hydrogen storage properties,anti-oxide ability and rate limiting step of Zr(Cr_(1−x)Co_(x))_(2)(x=0,0.2,0.4 and 0.6)alloys have been investigated.After studying the crystal structure,we...In this work,the microstructure,hydrogen storage properties,anti-oxide ability and rate limiting step of Zr(Cr_(1−x)Co_(x))_(2)(x=0,0.2,0.4 and 0.6)alloys have been investigated.After studying the crystal structure,we found that all alloy samples could show C14-type phase but the alloy sample x=0 could also show a small amount of Cr phase.Rietveld fitting showed that lattice parameter and unit cell volume of C14-type phase decreased with increasing x.After further research,it was clear that the first hydrogen absorption capacity decreased with increasing x.But introducing more Co content had a positive influence on the effective hydrogen storage capacity and cyclic hydrogen absorption and desorption properties of the alloy sample.We also found that adding Co to ZrCr_(2)alloy could improve its anti-oxide ability.In addition to this,the rate limiting step model was also studied.展开更多
文摘Amorphous Ti_(0.88)Ni_(1.00) and Ti_(1.69)Ni_(1.00) alloy films are prepared by means of ion beam sputtering using TiNi and Ti_2Ni alloy targets, respectively. Their hydrogen absorption properties are investigated by a galvanostatic method. The results show th the discharge capacity of the Ti_(1.69)Ni_(1.00) sample is higher than that of the Ti_(0.88)Ni_(1.00) sample. And the film electrodes have high durability and long cycle life.
基金supported by Natural Science Foundation of Jiangxi Province(20202BABL214003)Jiangxi Key Laboratory for Mass Spectrometry and Instrumentation(JXMS202008 and JXMS202009)+4 种基金Jiangxi Province Key Laboratory of Polymer Micro/Nano Manufacturing and Devices(PMND201902)Engineering Research Center of Nuclear Technology Application(East China University of Technology)Ministry of Education(HJSJYB2019–5)Science and Technology Project Founded by Education Department of Jiangxi Province(GJJ190406)Research Foundation for Advanced Talents of East China University of Technology(DHBK2019091).
文摘In this work,the microstructure,hydrogen storage properties,anti-oxide ability and rate limiting step of Zr(Cr_(1−x)Co_(x))_(2)(x=0,0.2,0.4 and 0.6)alloys have been investigated.After studying the crystal structure,we found that all alloy samples could show C14-type phase but the alloy sample x=0 could also show a small amount of Cr phase.Rietveld fitting showed that lattice parameter and unit cell volume of C14-type phase decreased with increasing x.After further research,it was clear that the first hydrogen absorption capacity decreased with increasing x.But introducing more Co content had a positive influence on the effective hydrogen storage capacity and cyclic hydrogen absorption and desorption properties of the alloy sample.We also found that adding Co to ZrCr_(2)alloy could improve its anti-oxide ability.In addition to this,the rate limiting step model was also studied.
