Effects of Storage Time and Hydrogen Peroxide on the Formation of Soy Globulin 15S in 11S Dilute Solutions Investigated by Analytical Ultracentrifugation

Two soy protein 11S fractions with different surface sulfhydryl contents were prepared.Utilizing analytical ultracentrifugation,the effects of storage time and hydrogen peroxide at different concentrations(0.5-100 mmol/L)on the two 11S fractions were investigated.Results show that after removing 2-mercaptoethanol(2-ME)by size exclusion chromatography,the 11S fraction with high surface sulfhydryl content(2.0 mol sulfhydryl/mol 11S)progressively formed 15S and 21S in dilute solutions during storage at 4℃ for 82 days.While,the 11s fraction with low surface sulfhydryl content(0.2 mol sulfhydryl/mol 11S)was stable under the same condition.Moreover,after treating the 11s with high surface sulfhydryl content with 1 mmol/L H_(2)O_(2),the weight percentage of 15S reached the maximum value of 20%.The 15S induced by air and H_(2)O_(2)could be totally converted to 11S with the addition of 10 mmol/L 2-ME,which could be attributed to that the disulfide bond linking two 11S molecules is on the surface of the 15S and easily accessible to the reducing agent 2-ME.This study helps us to deeply understand the formation mechanism of 15S and the stability of 11S.

Unveiling the chemistry behind the electrolytic production of hydrogen peroxide by oxygenated carbon

Oxygenated carbon materials exhibit outstanding electrocatalytic performance in the production of hydrogen peroxide(H2O2)through a two-electron oxygen reduction reaction.The nature of the active functional group and underlying reaction mechanism,however,remain unclear.Here,a comprehensive workflow was established to identify the active sites from the numerous possible structures.The common hydroxyl group at the notched edge demonstrates a key role in the two-electron process.The local chemical environment weakens the binding of OOH intermediate to substrate while enhancing interaction with solution,thereby promoting the H_(2)O_(2)production.With increasing pH,the intramolecular hydrogen bond between OOH intermediate and hydroxyl decreases,facilitating OOH desorption.Furthermore,the rise in selectivity with increasing potential stems from the suppression of the four-electron process.The active site was further validated through experiments.Guided by theoretical understanding,optimal performance was achieved with high selectivity(>95%)and current density(2.06 mA/cm^(2))in experiment.

Flower-like tin oxide membranes with robust three-dimensional channels for efficient removal of iron ions from hydrogen peroxide

Membrane technology has become the mainstream process for the production of electronic grade hydrogen peroxide(H_(2)O_(2)).But due to the oxidation degradation of the organic membranes(e.g.polyamide)by the strong oxidative radicals(e.g.OH)generated via the activation of H_(2)O_(2)by iron ions(Fe^(3+)),the short effective lifetime of membranes remains a challenge.Inorganic nano tin oxide(SnO_(2))has great potential for the removal of Fe^(3+)in strongly oxidative H_(2)O_(2)because of its ability to stabilize H2O_(2)and preferentially adsorb Fe^(3+).Herein,we have designed for the first time a flower-like robust SnO_(2)membrane on the ceramic support by in situ template-free one-step hydrothermal method.The three-dimensional loose pore structure in the membrane built by interlacing SnO_(2)nanosheets endows the SnO_(2)membrane with a high specific surface area and abundant adsorption sites(AOH).Based on the coordination complexation and electrostatic attraction between the SnO_(2)surface and Fe^(3+),the membrane shows a high Fe3+removal efficiency(83%)and permeability(24 L·m^(-2)·h^(-1)·MPa^(-1))in H_(2)O_(2).This study provides an innovative and simple approach to designing robust SnO_(2)membranes for highly efficient removal of Fe^(3+)in harsh environments,such as strong oxidation conditions.

Conducting Polymer-Based e-Refinery for Sustainable Hydrogen Peroxide Production

Electrocatalysis enables the industrial transition to sustainable production of chemicals using abundant precursors and electricity from renewable sources.De-centralized production of hydrogen peroxide(H_(2)O_(2))from water and oxygen of air is highly desirable for daily life and industry.We report an effective electrochemical refinery(e-refinery)for H_(2)O_(2)by means of electrocatalysis-controlled comproportionation reaction(2_(H)O+o→2HO),feeding pure water and oxygen only.Mesoporous nickel(Ⅱ)oxide(NiO)was used as electrocatalyst for oxygen evolution reaction(OER),producing oxygen at the anode.Conducting polymer poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)drove the oxygen reduction reaction(ORR),forming H_(2)O_(2)on the cathode.The reactions were evaluated in both half-cell and device configurations.The performance of the H_(2)O_(2)e-refinery,assembled on anion-exchange solid electrolyte and fed with pure water,was limited by the unbalanced ionic transport.Optimization of the operation conditions allowed a conversion efficiency of 80%.

Preparation of Regenerated Silk Fibroin Hybrid Fibers with Hydrogen Peroxide Sensing Properties by Wet Spinning

Silk is widely used in the production of high-quality textiles.At the same time,the amount of silk textiles no longer in use and discarded is increasing,resulting in significant waste and pollution.This issue is of great concern in many countries where silk is used.Hydrogen peroxide as a naturally occurring compound is an important indicator of detection in both biology and the environment.This study aims to develop a composite fiber with hydrogen peroxide-sensing properties using discarded silk materials.To achieve this goal,firstly,polydopamine(PDA)was used to encapsulate the ZnFe_(2)O_(4) NPs to achieve the improvement of dispersion,and then regenerated silk fibroin(RSF)and PDA@ZnFe_(2)O_(4)/RSF hybrid fibers are prepared by wet spinning.Research has shown that PDA@ZnFe_(2)O_(4)/RSF demonstrates exceptional sensitivity,selectivity,and stability in detecting hydrogen peroxide,while maintaining high mechanical strength.Furthermore,the complete hybridization of PDA@ZnFe_(2)O_(4) with silk fibroin not only results in the combination of the durability of silk fibroin and PDA@ZnFe_(2)O_(4)’s rigidity,ensuring a reliable service life,but also makes PDA@ZnFe_(2)O_(4)/RSF exhibit excellent catalytic activity and biocompatibility.Therefore,the composite fiber exhibits exceptional mechanical properties and reliable hydrogen peroxide sensing capabilities,making it a promising material for biological and medical applications.

Marrying luminescent metal nanoclusters to C_(3)N_(4) for efficient photocatalytic hydrogen peroxide production

Photocatalytic oxygen(O_(2))reduction has been considered a promising method for hydrogen peroxide(H_(2)O_(2))production.However,the poor visible light harvesting and low-efficient separation and generation of charge carriers of conventional photocatalysts strongly limited their photocatalytic H_(2)O_(2) generation performance.Herein,we design a highly efficient photocatalyst in this work by marrying luminescent gold-silver nanoclusters(AuAg NCs)to polyethyleneimine(PEI)modified C_(3)N_(4)(C3N4-PEI).The key design in this work is the utilization of highly luminescent AuAg NCs as photosensitizers to promote the generation and separation of charge carriers of C_(3)N_(4)-PEI,thereby ultimately producing abundant e−for O_(2) reduction under visible light illumination(λ≥400 nm).As a result,the as-designed photocatalyst(C3N4-PEI-AuAg NCs)exhibits excellent photocatalytic activity with an H_(2)O_(2) production capability of 82μM in pure water,which is 3.5 times higher than pristine C_(3)N_(4)(23μM).This interesting design provides a paradigm in developing other high-efficient photocatalysts for visible-light-driven H_(2)O_(2) production.

Curative effect of hydrogen peroxide combined with silver ion disinfection on pelvic floor dysfunction

BACKGROUND Pelvic floor dysfunction(PFD)is related to muscle fiber tearing during childbirth,negatively impacting postpartum quality of life of parturient.Appropriate and effective intervention is necessary to promote PFD recovery.AIM To analyze the use of hydrogen peroxide and silver ion disinfection for vaginal electrodes in conjunction with comprehensive rehabilitation therapy for postpartum women with PFD.METHODS A total of 59 women with PFD who were admitted to the hospital from May 2019 to July 2022 were divided into two groups:Control group(n=27)received comprehensive rehabilitation therapy and observation group(n=32)received intervention with pelvic floor biostimulation feedback instrument in addition to comprehensive rehabilitation therapy.The vaginal electrodes were disinfected with hydrogen peroxide and silver ion before treatment.Intervention for both groups was started 6 weeks postpartum,and rehabilitation lasted for 3 months.Pelvic floor muscle voltage,pelvic floor muscle strength,vaginal muscle voltage,vaginal muscle tone,pelvic floor function,quality of life,and incidence of postpartum PFD were compared between the two groups.RESULTS Before comprehensive rehabilitation treatment,basic data and pelvic floor function were not significantly different between the two groups.After treatment,the observation group showed significant improvements in the maximum voltage and average voltage of pelvic floor muscles,contraction time of type I and type II fibers,pelvic floor muscle strength,vaginal muscle tone,vaginal muscle voltage,and quality of life(GQOLI-74 reports),compared with the control group.The observation group had lower scores on the pelvic floor distress inventory(PFDI-20)and a lower incidence of postpartum PFD,indicating the effectiveness of the pelvic floor biostimulation feedback instrument in promoting the recovery of maternal pelvic floor function.CONCLUSION The combination of the pelvic floor biostimulation feedback instrument and comprehensive rehabilitation nursing can improve pelvic floor muscle strength,promote the recovery of vaginal muscle tone,and improve pelvic floor function and quality of life.The use of hydrogen peroxide and silver ion disinfectant demonstrated favorable antibacterial efficacy and is worthy of clinical application.

Risk Assessment of Hydrogen Peroxide Low- Temperature Plasma Sterilization Using Different Monitoring Methods

Objective:This study aims to evaluate the application value of biological monitoring and different types of chemical indicator cards in batch monitoring of hydrogen peroxide low-temperature plasma sterilization.The goal is to standardize the selection of loading conditions for this sterilization method and avoid positive biological monitoring results.Methods:Physical monitoring,Class I chemical indicator card monitoring,Class IV chemical indicator card monitoring,and biological monitoring were used to monitor the hydrogen peroxide low-temperature plasma sterilization process.The sterilization effect on instruments inside the Johnson&Johnson 100S plasma sterilizer was monitored and the qualification of various monitoring methods was compared.Results:The comparison showed that when non-standard or adsorption-prone packaging materials were used,the interception rate of biological monitoring and Class IV chemical indicator cards was significantly higher than that of physical monitoring and Class I chemical indicator cards.These methods more intuitively and effectively detected sterilization failures.Conclusion:Biological monitoring and Class IV chemical indicator cards are safe,fast,accurate,and easy to interpret in hydrogen peroxide low-temperature plasma sterilization,especially for monitoring instruments inside packages.They provide a reliable basis for the release of sterilized instrument packages.Identifying the reasons for positive biological monitoring results in hydrogen peroxide low-temperature plasma sterilization and taking effective measures promptly can minimize associated risks.

Kinetic mechanism of copper extraction from methylchlorosilane slurry residue using hydrogen peroxide as oxidant

Copper was extracted from methylchlorosilane slurry residue by a direct hydrogen peroxide leaching method.A number of experimental parameters were analyzed to determine the extraction efficiency of copper.The extraction efficiency of copper reached 98.5%under the optimal leaching conditions,such as the hydrogen peroxide concentration of 1.875 mol·L^(-1),the leaching temperature of 323 K,the liquid–solid ratio of 20 ml·g^(-1),and the stirring speed of 300 r·min^(-1).The leaching kinetics of the copper extraction process was then described by the shrinking core model.There were two stages.The first stage was controlled by chemical reactions,while the second stage was controlled by interface transfer and product layer diffusion.The activation energy and kinetic control equations were determined,as well as an explanation of the leaching mechanism of copper extraction based on kinetic analysis and materials characterization.Copper resources can be recovered from the methylchlorosilane slurry residue efficiently and inexpensively with the methods used in this study.

Carbon Nitride Quantum Dots:A Novel Fluorescent Probe for Non-Enzymatic Hydrogen Peroxide and Mercury Detection

The mercury species in the ocean(MeHg,Hg^(2+))will be enriched in marine organisms and threaten human health through the food chain.While the excessive H_(2)O_(2)in the metabolic process will produce hydroxyl radicals and accelerate the aging of human cells,causing a series of diseases.Hence,the cost-effective and rapid detection of mercury and H_(2)O_(2)is of urgent requirement and significance.Here,we synthesized emerging graphitic carbon nitride quantum dots(g-CNQDs)with high fluorescence quantum yield(FLQY)of 42.69%via a bottom-up strategy by a facile one-step hydrothermal method.The g-CNQDs can detect the H_(2)O_(2)and Hg^(2+)through the fluorescence quenching effect between g-CNQDs and detected substances.With the presence of KI,g-CNQDs show concentration-dependent fluorescence toward H_(2)O_(2),with a wide detection range of 1–1000μmolL^(-1)and a low detection limit of 0.23μmolL^(-1).The g-CNQDs also show sensitivity toward Hg^(2+)with a detection range of 0–0.1μmolL^(-1)and a detection limit of 0.038μmolL^(-1).This dual-function detection of g-CNQDs has better practical application capability compared to other quantum dot detection.This study may provide a new strategy for g-CNQDs preparation and construct a fluorescence probe that can be used in various systems involving H_(2)O_(2)and Hg^(2+),providing better support for future bifunctional or multifunction studies.

Strategies for Sustainable Production of Hydrogen Peroxide via Oxygen Reduction Reaction:From Catalyst Design to Device Setup

An environmentally benign,sustainable,and cost-effective supply of H_(2)O_(2)as a rapidly expanding consumption raw material is highly desired for chemical industries,medical treatment,and household disinfection.The electrocatalytic production route via electrochemical oxygen reduction reaction(ORR)offers a sustainable avenue for the onsite production of H_(2)O_(2)from O2 and H2O.The most crucial and innovative part of such technology lies in the availability of suitable electrocatalysts that promote two-electron(2e^(–))ORR.In recent years,tremendous progress has been achieved in designing efficient,robust,and cost-effective catalyst materials,including noble metals and their alloys,metalfree carbon-based materials,single-atom catalysts,and molecular catalysts.Meanwhile,innovative cell designs have significantly advanced electrochemical applications at the industrial level.This review summarizes fundamental basics and recent advances in H_(2)O_(2)production via 2e^(–)-ORR,including catalyst design,mechanistic explorations,theoretical computations,experimental evaluations,and electrochemical cell designs.Perspectives on addressing remaining challenges are also presented with an emphasis on the large-scale synthesis of H_(2)O_(2)via the electrochemical route.

Effect of hydrogen peroxide on selective flotation of chalcocite and enargite

Enargite is typically associated with chalcocite.Owing to the similarity in the flotation behaviors of these minerals,both minerals are reported to concentrate in the conventional flotation circuit.However,inorganic arsenic in enargite can decrease the copper concentrate quality and increase the operating cost of processing this concentrate.Separating these minerals is important for cleaner copper production to avoid these effects.In this context,this study investigated the effect of hydrogen peroxide(H_(2)O_(2))treatment on the flotation behavior of chalcocite and enargite.Flotation tests of pure and mixed minerals indicated that H_(2)O_(2)treatment reduced the floatability of chalcocite and enargite by forming sulfate and copper hydroxide on their surfaces.Despite the detrimental effect of the H_(2)O_(2)treatment,there was a narrow window of H_(2)O_(2)concentration for separating both minerals,in which enargite floated and chalcocite was depressed.This selective flotation behavior was caused by the rapid adsorption of potassium amyl xanthate(KAX)and lower surface oxidation of enargite compared with that of chalcocite.

Efficient hydrogen peroxide production enabled by exploring layered metal telluride as two electron oxygen reduction reaction electrocatalyst

It is of great interest to develop the novel transition metal-based electrocatalysts with high selectivity and activity for two electron oxygen reduction reaction(2e^(-) ORR).Herein,the nickel ditelluride(NiTe_(2)) with layered structure was explored as the 2e^(-) ORR electrocatalyst,which not only showed the highest 2e^(-) selectivity more than 97%,but also delivered a slight activity decay after 5000 cycles in alkaline media.Moreover,when NiTe_(2) was assembled as the electrocatalyst in H-type electrolyzer,the on-site yield of H_(2)O_(2) could reach up to 672 mmol h^(-1)g^(-1) under 0.45 V vs.RHE.Further in situ Raman spectra,theoretical calculation and post microstructural analysis synergistically unveiled that such a good 2e^(-) ORR performance could be credited to the intrinsic layered crystal structure,the high compositional stability,as well as the electron modulation on the active site Ni atoms by neighboring Te atoms,leading to the exposure of active sites as well as the optimized adsorption free energy of Ni to –OOH.More inspiringly,such telluride electrocatalyst has also been demonstrated to exhibit high activity and selectivity towards 2e^(-) ORR in neutral media.

Direct production of hydrogen peroxide over bimetallic CoPd catalysts:Investigation of the effect of Co addition and calcination temperature

A series of CoPd/KIT-6 bimetallic catalysts with various Co:Pd molar ratios at different calcination temperatures were prepared and used for the direct synthesis of H_(2)O_(2) from H_(2) and O_(2).These catalysts were characterized by nitrogen adsorption-desorption,low and wide-angle X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM),scanning electron microscopy(SEM),elemental mapping and energy-dispersive X-ray(EDX)methods.It was found that the particle size,electronic interactions,morphology,and textural properties of these catalysts as well as their catalytic activity in the reaction of H_(2) with O_(2) were affected by Co addition and different calcination temperatures.Also,the results showed that while the H_(2)O_(2) selectivity depends on Pd^(2+) species,the H_(2) conversion is related to Pd0 active sites.Among these catalysts,CoPd/KIT-6 calcined at 350℃(CoPd/KIT-350 catalyst)showed the best catalytic activity with 50%of H_(2)O_(2) selectivity and 51%conversion of H_(2).

Ultra‐low single‐atom Pt on g‐C_(3)N_(4)for electrochemical hydrogen peroxide production

Platinum-based materials show excellent electrocatalytic performance and have good potential for use in fuel cells.However,the high cost and scarce reserves have restricted their wide application.Therefore,it is a challenging task to reduce the amount of Pt as well as ensure good catalytic performance.Herein,anchoring of Pt single atoms(0.21 wt‰)with ultra-low content on g-C_(3)N_(4)nanosheets(Pt_(0.21)/CN)has been successfully achieved.The obtained Pt_(0.21)/CN catalyst shows excellent two-electron oxygen reduction(2e-ORR)capability for hydrogen peroxide(H_(2)O_(2)).Compared with CN,its H_(2)O_(2)selectivity increased from 80%to 98%in 0.1M KOH,surpassing those in most of the reported studies.Besides,the H_(2)O_(2)production rate of Pt_(0.21)/CN is 767 mmol gcat^(-1)h-1,which is 11.1 times that of CN.This work may pave the way toward the development of an effective method for the design of noblemetal electrocatalysts with low metal loading and high catalytic activity.

Cryotherapy versus Hydrogen Peroxide in the Treatment of Seborrheic Keratosis

Seborrheic keratosis has a varying degree of pigmentation. In pigmented seborrheic keratosis, the proliferating keratinocytes trigger the activation of neighboring melanocytes by secreting melanocyte-stimulating cytokines. The etiology of seborrheic keratosis is not known. Epidermal growth factors or their receptors have been implicated in the development of seborrheic keratosis. Seborrheic keratoses can safely be left alone, but ugly or easily traumatized ones can be removed with cryotherapy, electrodesiccation, curettage, or shave excision. The present work aims to compare two modalities of treatment for seborrheic keratosis, namely cryotherapy and hydrogen peroxide (30%). Methods: 30 patients with seborrheic keratosis were included in this study. They were divided into two groups, each with 15 patients. The treatment modalities that have been used include cryotherapy and hydrogen peroxide in three different concentrations (30%, 35%, and 40%). Result: The cryotherapy group consisted of 15 patients, 7 males and 8 females. Their ages ranged from 38 to 80 years, with a mean of 56.1 ± 11.4. Clinical and photographic assessments showed complete removal in all 15 patients in this group (100%). As regards the hydrogen peroxide group, this group included 15 patients, distributed among 7 males and 8 females. Their ages ranged from 39 to 90 years, with a mean of 53.9 ± 14.4. Clinical and photographic assessments showed response in only one small superficial lesion in one patient (6.7%) and no response in 14 patients (93.3%). Conclusion: Cryotherapy is an effective, easy, and relatively cheap method for treating seborrheic keratosis.

Heterogeneous Uptake of Hydrogen Peroxide on Mineral Oxides

The interaction of mineral oxides （α-A12O3, MgO, Fe2O3, and SiO2） with hydrogen peroxide was investigated using the Knudsen cell reactor. The initial reactive uptake coefficients for tile commercially available powders are measured as （1.00±0.11）×10-4 for α-A1203, （1.66±0.23）×10-4 for MgO, （9.70±1.95）×10-5 for Fe203, and （5.22±0.9）×10-5 for SiO2. These metal oxide powders exhibit some catalytic behavior toward the decomposition of hydrogen peroxide excluding SiO2. H2O2 can be destroyed on Fe2O3 surface and O2 is formed. The experimental results suggest that the heterogeneous loss on mineral surface can represent an important sink of hydrogen peroxide.

Seed Germination of Eggplant (Solanum melongena L.) Luba 2 Treated with Hydrogen Peroxide

[Objective] This study aimed to investigate the effect of hydrogen peroxide on the seed germination of eggplant （Solanum melongena L.） Luba 2.[Method] The seeds of Luba 2 were separately soaked in 20％,40％,60％ and 80％ hydrogen peroxide solution for 2,5 and 10 min before seed germination.The germination rate and days to reach the maximum germination rate were calculated.[Result] Treatment with low concentrations （20％） of hydrogen peroxide for 2 and 5 min made eggplant Luba 2 germinate in advance,and shortened the time to reach the maximum germination rate.Treatment with high concentrations （60％ and 80％） of hydrogen peroxide solution for longer time （10 min） caused significant damage to the seeds,delayed seed germination,and reduced the germination rate.[Conclusion] This study will provide theoretical references for the production practices of eggplant.

Effect of hydrogen peroxide concentration on surface properties of Ni-Cr alloys

The effect of concentration of hydrogen peroxide （H2O2） on the surface properties of Ni-Cr alloys was studied. Surface roughness and surface morphology of Ni-Cr alloys were evaluated by surface profiler and scanning electron microscopy after being immersed in different concentrations of H2O2 for 112 h. Surface corrosion products of Ni-Cr alloys were analyzed by photoelectron spectrograph after being immersed in 0% and 30% H2O2. The order of increasing surface roughness of Ni-Cr alloys after being immersed in different concentrations of H2O2 was 0〈3.6%〈10%〈30%. As the concentration of hydrogen peroxide increased, the surface roughness of Ni-Cr alloys increased and the surface morphology showed different degrees of corrosion. According to the XPS results, the corrosion products formed on the outmost surface layer of the studied samples are Ni（OH）2 and BeO.

Involvement of ERK1/2 and p38 MAPK in up-regulation of 14-3-3 protein induced by hydrogen peroxide preconditioning in PC12 cells

Objective To investigate the protective effects of hydrogen peroxide preconditioning （HPP） on the pheochromocytoma （PC12） cells treated with 1-methyl-4-phenylpyridinium （MPP^＋） and to explore the potential mechanisms. Methods The viability and apoptosis of PC 12 cells were determinded by 3-（4,5-dimethylthiazol-2-yl）-2,5-diphenyltetrazolium bromide （MTT） assay and 4′,6′-diamidino-2-phenylindole （DAPI） staining, respectively. The expressions of 14-3-3 protein and phospholylated p38 mitogen-activated protein kinase （MAPK） were determined by Western blot. Enzyme-linked immunosorbent assay （ELISA） was used to measure the activity of extracellular signal-regulated protein kinase 1/2 （ERK1/2）. Results The cell viability decreased and the number of apoptotic cells increased dramatically in MPP^＋ group compared with that in Control group. HPP induced a significant increase in cell viability and a marked decrease in population of apoptotic cells of the MPP^＋- treated PC 12 cells, accompanied with up-regulation of 14-3-3 protein and increase of ERK 1/2 and p38 MAPK activities. The 14-3-3 protein expression was positively correlated with the phosphorylation of ERK1/2. Furthermore, inhibition of the ERK1/2 with PD98059 abolished the 14-3-3 protein up-regulation in PC 12 cells induced by HPP. Conclusion HPP protects PC 12 cells against MPP＋ toxicity by up-regulating 14-3-3 protein expression through the ERK1/2 and p38 MAPK signaling pathways.