Preparation of Regenerated Silk Fibroin Hybrid Fibers with Hydrogen Peroxide Sensing Properties by Wet Spinning

Silk is widely used in the production of high-quality textiles.At the same time,the amount of silk textiles no longer in use and discarded is increasing,resulting in significant waste and pollution.This issue is of great concern in many countries where silk is used.Hydrogen peroxide as a naturally occurring compound is an important indicator of detection in both biology and the environment.This study aims to develop a composite fiber with hydrogen peroxide-sensing properties using discarded silk materials.To achieve this goal,firstly,polydopamine(PDA)was used to encapsulate the ZnFe_(2)O_(4) NPs to achieve the improvement of dispersion,and then regenerated silk fibroin(RSF)and PDA@ZnFe_(2)O_(4)/RSF hybrid fibers are prepared by wet spinning.Research has shown that PDA@ZnFe_(2)O_(4)/RSF demonstrates exceptional sensitivity,selectivity,and stability in detecting hydrogen peroxide,while maintaining high mechanical strength.Furthermore,the complete hybridization of PDA@ZnFe_(2)O_(4) with silk fibroin not only results in the combination of the durability of silk fibroin and PDA@ZnFe_(2)O_(4)’s rigidity,ensuring a reliable service life,but also makes PDA@ZnFe_(2)O_(4)/RSF exhibit excellent catalytic activity and biocompatibility.Therefore,the composite fiber exhibits exceptional mechanical properties and reliable hydrogen peroxide sensing capabilities,making it a promising material for biological and medical applications.

Efficient nonenzymatic hydrogen peroxide sensor in acidic media based on Prussian blue nanoparticles-modified poly(o-phenylenediamine)/glassy carbon electrode

The Prussian blue nanoparticles（PBNPs） were prepared by a self-assembly process, on a glassy carbon（GC） electrode modified with a poly（o-phenylenediamine）（Po PD） film. The stepwise fabrication process of PBNPs-modified Po PD/GCE was characterized by scanning electron microscopy（SEM） and electrochemical impedance spectroscopy. The prepared PBNPs showed an average size of 70 nm and a homogeneous distribution on the surface of modified electrodes. The PBNPs/Po PD/GCE showed adequate mechanical, electrochemical stability and good sensitivity in comparison with other PB based H2O2 sensors. The present modified electrode exhibited a linear response for H2O2 reduction over the concentration range of 1–58.22 mmol L ^-1with a detection limit of ca. 0.8 mmol L ^-1（S/N = 3）, and sensitivity of 3187.89 m A（mol L ^-1） ^-1cm ^-2using the amperometric method. This sensor was employed for the H2O2 determination in real sample and also exhibited good interference resistance and selectivity.

CuS/RGO hybrid by one-pot hydrothermal method for efficient electrochemical sensing of hydrogen peroxide

In this study,a non-enzymatic hydrogen peroxide sensor was successfully fabricated on the basis of copper sulfide nanoparticles/reduced graphene oxide（CuS/RGO） electrocatalyst.Using thiourea as reducing agent and sulfur donor,CuS/RGO hybrid was synthesized through a facile one-pot hydrothermal method,where the reduction of GO and deposition of CuS nanoparticles on RGO occur simultaneously.The results confirmed that the CuS/RGO hybrid helps to prevent the aggregation of CuS nanoparticles.Electrochemical investigation showed that the as-prepared hydrogen peroxide sensor exhibited a low detection limit of 0.18μmol/L（S/N = 3）,a good reproducibility（relative standard deviation（RSD） of4.21%）,a wide linear range（from 3 to 1215 μmol/L） with a sensitivity of 216.9 μA L/mmol/cm-2 under the optimal conditions.Moreover,the as-prepared sensor also showed excellent selectivity and stability for hydrogen peroxide detection.The excellent performance of CuS/RGO hybrid,especially the lower detection limit than certain enzymes and noble metal nanomaterials ever reported,makes it a promising candidate for non-enzymatic H2O2 sensors.

Green preparation of Au nanoparticles for electrochemical detection of H2O2

A simple and green method for preparation of Au nanoparticles by reduction of HAuC14 using carbon nanodots as the reducing agent is reported. The carbon nanodots were prepared by a green method as well, using hydrothermal treatment of grass. It is observed that Au nanoparticles show obvious electrochemical catalytic abil- ity for reduction of hydrogen peroxide, leading to its application of a high-performance non-enzymatic hydrogen peroxide sensor. The hydrogen peroxide sensor based on Au nanoparticles was made, with the detection limit at 23 #M and linear range between 0.1-160 mM.