Deep eutectic solvents for separation and purification applications in critical metal metallurgy:Recent advances and perspectives

Solvent extraction,a separation and purification technology,is crucial in critical metal metallurgy.Organic solvents commonly used in solvent extraction exhibit disadvantages,such as high volatility,high toxicity,and flammability,causing a spectrum of hazards to human health and environmental safety.Neoteric solvents have been recognized as potential alternatives to these harmful organic solvents.In the past two decades,several neoteric solvents have been proposed,including ionic liquids(ILs)and deep eutectic solvents(DESs).DESs have gradually become the focus of green solvents owing to several advantages,namely,low toxicity,degradability,and low cost.In this critical review,their classification,formation mechanisms,preparation methods,characterization technologies,and special physicochemical properties based on the most recent advancements in research have been systematically described.Subsequently,the major separation and purification applications of DESs in critical metal metallurgy were comprehensively summarized.Finally,future opportunities and challenges of DESs were explored in the current research area.In conclusion,this review provides valuable insights for improving our overall understanding of DESs,and it holds important potential for expanding separation and purification applications in critical metal metallurgy.

Reviewing electrochemical stability of ionic liquids-/deep eutectic solvents-based electrolytes in lithium-ion,lithium-metal and post-lithium-ion batteries for green and safe energy

Sustainable energy is the key issue for the environment protection,human activity and economic development.Ionic liquids(ILs)and deep eutectic solvents(DESs)are dogmatically regarded as green and sustainable electrolytes in lithium-ion,lithium-metal(e.g.,lithium-sulphur,lithium-oxygen)and post-lithium-ion(e.g.,sodium-ion,magnesium-ion,and aluminum-ion)batteries.High electrochemical stability of ILs/DESs is one of the prerequisites for green,sustainable and safe energy;while easy electrochemical decomposition of ILs/DESs would be contradictory to the concept of green chemistry by adding the cost,releasing volatile/hazardous by-products and hindering the recyclability.However,(1)are ILs/DESs-based electrolytes really electrochemically stable when they are not used in batteries?(2)are ILs/DESs-based electrolytes really electrochemically stable in real batteries?(3)how to design ILs/DESs-based electrolytes with high electrochemical stability for batteries to achieve sustainability and green development?Up to now,there is no summary on this topic,to the best of our knowledge.Here,we review the effect of chemical structure and non-structural factors on the electrochemical stability of ILs/DESs in simulated conditions.More importantly,electrochemical stability of ILs/DESs in real lithium-ion,lithium-metal and post-lithium-ion batteries is concluded and compared.Finally,the strategies to improve the electrochemical stability of ILs/DESs in lithium-ion,lithium-metal and post-lithium-ion batteries are proposed.This review would provide a guide to design ILs/DESs with high electrochemical stability for lithium-ion,lithium-metal and postlithium-ion batteries to achieve sustainable and green energy.

Theoretical analysis of hydrogen solubility in direct coal liquefaction solvents

The cyclic hydrogenation technology in a direct coal liquefaction process relies on the dissolved hydrogen of the solvent or oil participating in the hydrogenation reaction.Thus,a theoretical basis for process optimization and reactor design can be established by analyzing the solubility of hydrogen in liquefaction solvents.Experimental studies of hydrogen solubility in liquefaction solvents are challenging due to harsh reaction conditions and complex solvent compositions.In this study,the composition and content of liquefied solvents were analyzed.As model compounds,hexadecane,toluene,naphthalene,tetrahydronaphthalene,and phenanthrene were chosen to represent the liquefied solvents in chain alkanes and monocyclic,bicyclic,and tricyclic aromatic hydrocarbons.The solubility of hydrogen X(mol/mol)in pure solvent components and mixed solvents(alkanes and aromatics mixed in proportion to the chain alkanes+bicyclic aromatic hydrocarbons,bicyclic saturated aromatic hydrocarbons+bicyclic aromatic hydrocarbons,and bicyclic aromatic hydrocarbons+compounds containing het-eroatoms composed of mixed components)are determined using Aspen simulation at temperature and pressure conditions of 373–523 K and 2–10 MPa.The results demonstrated that at high temperatures and pressures,the solubility of hydrogen in the solvent increases with the increase in temperature and pressure,with the pressure having a greater impact.Further-more,the results revealed that hydrogen is more soluble in straight-chain alkanes than in other solvents,and the solubility of eicosanoids reaches a maximum of 0.296.The hydrogen solubility in aromatic ring compounds decreased gradually with an increase in the aromatic ring number.The influence of chain alkanes on the solubility of hydrogen predominates in a mixture of solvents with different mixing ratios of chain alkanes and aromatic hydrocarbons.The solubility of hydrogen in mixed aromatic solvents is less than that in the corresponding single solvents.Hydrogen is less soluble in solvent compounds containing heteroatoms than in compounds without heteroatoms.

Experimental investigation on coal pore-fracture variation and fractal characteristics synergistically affected by solvents for improving clean gas extraction

Chemical solvents instead of pure water being as hydraulic fracturing fluid could effectively increase permeability and improve clean methane extraction efficiency.However,pore-fracture variation features of lean coal synergistically affected by solvents have not been fully understood.Ultrasonic testing,nuclear magnetic resonance analysis,liquid phase mass spectrometry was adopted to comprehensively analyze pore-fracture change characteristics of lean coal treated by combined solvent(NMP and CS_(2)).Meanwhile,quantitative characterization of above changing properties was conducted using geometric fractal theory.Relationship model between permeability,fractal dimension and porosity were established.Results indicate that the end face fractures of coal are well developed after CS2and combined solvent treatments,of which,end face box-counting fractal dimensions range from 1.1227 to 1.4767.Maximum decreases in ultrasonic longitudinal wave velocity of coal affected by NMP,CS_(2)and combined solvent are 2.700%,20.521%,22.454%,respectively.Solvent treatments could lead to increasing amount of both mesopores and macropores.Decrease ratio of fractal dimension Dsis 0.259%–2.159%,while permeability increases ratio of NMR ranges from 0.1904 to 6.4486.Meanwhile,combined solvent could dissolve coal polar and non-polar small molecules and expand flow space.Results could provide reference for solvent selection and parameter optimization of permeability-enhancement technology.

Insight into the experiment and extraction mechanism for separating carbazole from anthracene oil with quaternary ammonium-based deep eutectic solvents

Carbazole is an irreplaceable basic organic chemical raw material and intermediate in industry.The separation of carbazole from anthracene oil by environmental benign solvents is important but still a challenge in chemical engineering.Deep eutectic solvents (DESs) as a sustainable green separation solvent have been proposed for the separation of carbazole from model anthracene oil.In this research,three quaternary ammonium-based DESs were prepared using ethylene glycol (EG) as hydrogen bond donor and tetrabutylammonium chloride (TBAC),tetrabutylammonium bromide or choline chloride as hydrogen bond acceptors.To explore their extraction performance of carbazole,the conductor-like screening model for real solvents (COSMO-RS) model was used to predict the activity coefficient at infinite dilution (γ^(∞)) of carbazole in DESs,and the result indicated TBAC:EG (1:2) had the stronger extraction ability for carbazole due to the higher capacity at infinite dilution (C^(∞)) value.Then,the separation performance of these three DESs was evaluated by experiments,and the experimental results were in good agreement with the COSMO-RS prediction results.The TBAC:EG (1:2) was determined as the most promising solvent.Additionally,the extraction conditions of TBAC:EG (1:2) were optimized,and the extraction efficiency,distribution coefficient and selectivity of carbazole could reach up to 85.74%,30.18 and 66.10%,respectively.Moreover,the TBAC:EG (1:2) could be recycled by using environmentally friendly water as antisolvent.In addition,the separation performance of TBAC:EG (1:2) was also evaluated by real crude anthracene,the carbazole was obtained with purity and yield of 85.32%,60.27%,respectively.Lastly,the extraction mechanism was elucidated byσ-profiles and interaction energy analysis.Theoretical calculation results showed that the main driving force for the extraction process was the hydrogen bonding ((N–H...Cl) and van der Waals interactions (C–H...O and C–H...π),which corresponding to the blue and green isosurfaces in IGMH analysis.This work presented a novel method for separating carbazole from crude anthracene oil,and will provide an important reference for the separation of other high value-added products from coal tar.

Efficient and reversible separation of NH_(3) by deep eutectic solvents with multiple active sites and low viscosities

The efficient separation and collection of ammonia(NH_(3))during NH_(3) synthesis process is essential to improve the economic efficiency and protect the environment.In this work,ethanolammonium hydrochloride(EtOHACl)and phenol(PhOH)were used to prepare a novel class of deep eutectic solvents(DESs)with multiple active sites and low viscosities.The NH_(3) separation performance of EtOHACl+PhOH DESs was analyzed completely.It is figured out that the NH_(3) absorption rates in EtOHACl+PhOH DESs are very fast.The NH_(3) absorption capacities are very high and reach up to 5.52 and 10.74 mol·kg1 at 11.2 and 100.4 kPa under 298.2 K,respectively.In addition,the EtOHACl+PhOH DESs present highly selective absorption of NH_(3) over N_(2) and H_(2) and good regenerative properties after seven cycles of absorption/desorption.The intrinsic separation mechanism of NH_(3) by EtOHACl+PhOH DESs was further revealed by spectroscopic analysis and quantum chemistry calculations.

Oxidative Desulfurization of Fuel Oil with H_(3)PO_(4)-based Deep Eutectic Solvents

A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80℃ to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs were characterized byFourier transform infrared spectrophotometry (FT-IR), thermogravimetry/differential thermogravimetry (TG/DTG), andelectron spray ionization mass spectrometry (ESI-MS). The DESs were used as both extractants and catalysts to removedibenzothiophene from fuels via oxidative desulfurization (ODS). Experiments were performed to investigated the influenceof factors such as composition of DES, temperature, oxidant dosage (molar ratio of O:S), DES dosage (volume ratio ofDES:oil), and number of cycles on desulfurization rate. The results indicated that the removal rate of dibenzothiophene (DBT)was affected by the Lewis acidic DESs, with that of H_(3)PO_(4)/0.25∙ZnCl_(2) reaching 96.4% under optimal conditions (Voil=5 mL,VDES=1 mL, an oxidant dosage of 6, T=50 ℃). After six cycles, the desulfurization rate of H_(3)PO_(4)/0.25∙ZnCl_(2) remained above94.1%. The apparent activation energy of dibenzothiophene (DBT) removal reaction was determined by a pseudo-first orderkinetic equation according to the Arrhenius equation to be 32.34 kJ/mol, as estimated. A reaction mechanism is proposedbased on the experimental data and characterization results.

Machine-Learning-Assisted Design of Deep Eutectic Solvents Based on Uncovered Hydrogen Bond Patterns

Non-ionic deep eutectic solvents(DESs)are non-ionic designer solvents with various applications in catalysis,extraction,carbon capture,and pharmaceuticals.However,discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation.The search for DES relies heavily on intuition or trial-and-error processes,leading to low success rates or missed opportunities.Recognizing that hydrogen bonds(HBs)play a central role in DES formation,we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning(ML)models to discover new DES systems.We first analyze the HB properties of 38 known DES and 111 known non-DES systems using their molecular dynamics(MD)simulation trajectories.The analysis reveals that DES systems have two unique features compared to non-DES systems:The DESs have①more imbalance between the numbers of the two intra-component HBs and②more and stronger inter-component HBs.Based on these results,we develop 30 ML models using ten algorithms and three types of HB-based descriptors.The model performance is first benchmarked using the average and minimal receiver operating characteristic(ROC)-area under the curve(AUC)values.We also analyze the importance of individual features in the models,and the results are consistent with the simulation-based statistical analysis.Finally,we validate the models using the experimental data of 34 systems.The extra trees forest model outperforms the other models in the validation,with an ROC-AUC of 0.88.Our work illustrates the importance of HBs in DES formation and shows the potential of ML in discovering new DESs.

Treatments of Pollen with Different Solvents Affect the Seed Setting Rate of Rice(Oryza sativa L.)

This study aimed to investigate the effects of treatments of rice pollen with different solvents on the seed setting rate.Rice pollen was treated with ultrapure water,0.5%dimethyl sulfoxide,ethanol(1%,5%,and 8%),and 0.5%dimethyl sulfoxide+8%ethanol,and the pollen without treatment was taken as the control.Then,crossing was conducted with the treated rice plants as the male parents and plants subjected to emasculation by warm water as the female parents.The seed setting rates of the male and female parents were then recorded.The results showed that the treatments with different solvents significantly decreased the seed setting rates of both male and female parents.The treatment with 1%ethanol resulted in the highest seed setting rates for both male and female parents,while the treatment with 0.5%dimethyl sulfoxide resulted in the lowest seed setting rates for both parents.Although these solvents affected the seed setting rate of rice,they served as intermediate solvents to dissolve chemicals used in the induction of rice haploids.This study layed a technical foundation for subsequent chemical induction of rice haploids.

Activation mechanism of conventional electrolytes with amine solvents:Species evolution and hydride-containing interphase formation

Rechargeable magnesium(Mg)-metal batteries have brought great expect to overcome the safety and energy density concerns of typical lithium-ion batteries.However,interracial passivation of the Mgmetal anode impairs the reversible Mg plating/stripping chemistries,resulting in low Coulombic efficiency and large overpotential.In this work,a facile isobutylamine(IBA)-assisted activation strategy has been proposed and the fundamental mechanism has been unveiled in a specific way of evolving active species and forming MgH_(2)-based solid-electrolyte interphase.After introducing IBA into a typical electrolyte of magnesium bis(trifluoromethanesulfo nyl) imide(Mg(TFSI)_(2)) in diglyme(G2) solvents,electrolyte species of [Mg^(2+)(IBA)5]^(2+) and protonated amine-based cations of [(IBA)H]^(+) have been detected by nuclear magnetic resonance and mass spectra.This not only indicates direct solvation of IBA toward Mg^(2+)but also suggests its ionization,which is central to mitigating the decomposition of G2 and TFSI anions by forming neutrally charged [(IBAH^(+))(TFSI^(-))]~0 and other complex ions.A series of experiments,including cryogenic-electron microscopy,D_(2)O titration-mass spectra,and time of flight secondary ion mass spectrometry results,reveal a thin,non-passivated,and MgH_(2)-containing interphase on the Mg-metal anode.Besides,uniform and dendrite-free Mg electrodeposits have been revealed in composite electrolytes.Benefiting from the activation effects of IBA,the composite electrolyte displays superior electrochemical performance(overpotential is approximately 0.16 V versus 2.00 V for conventional electrolyte;Coulombic efficiency is above 90% versus <10% for conventional electrolyte).This work offers a fresh direction to advanced electrolyte design for next-generation rechargeable batteries.

Research Progress of Deep Eutectic Solvents in Extraction of Plant Flavonoids

As a new type of green solvents,deep eutectic solvents(DESs)have the advantages of strong extraction ability,designability,simple preparation,low price,recoverability and biodegradation,and show great application potential in the field of plant flavonoid extraction.In this paper,the definition,classification and preparation methods of DESs were introduced.The effects of DES composition,molar ratio of DES components,water content of DES systems,liquid-material ratio,extraction temperature,extraction time and extraction auxiliary techniques on the extraction yield of plant flavonoids were expounded.The recycling methods of DESs were summarized.Existing problems of DESs in the field of plant flavonoids extraction were pointed out,and further research direction and trend were analyzed and prospected.

Stoichiometry and Stability Constant Values for Copper (II) Chelates with Ethylene Diamine in Deep Eutectic Solvents (DES) (Ethaline) Solutions

In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements have been applied for establishing, the stoichiometry and whenever possible, the stability constants of the chelates formed. The method of continuous variations was necessary to determine first whether, the metal ion and the ligand ethylene diamine form one or more than one chelate, when more than one chelate formed, the results obtained depend on the wavelength and for meaningful conclusions the wavelengths were carefully selected. The empirical formulae of the chelates were further substantiated by the molar ratio method. The effect of time and temperature on the formation and stability of these chelates in solution is also studied. The stability constants, K1 and K2 for the copper (II) chelates were calculated, though reliable, and are comparable to literature values.

Ultrasonic assisted natural deep eutectic solvents as a green and efficient approach for extraction of hydroxytyrosol from olive leaves

In this study,an ultrasonic assisted natural deep eutectic solvent(DES)was used to extract hydroxytyrosol(HT)from olive leaves.The optimal extraction conditions of the MaPa-4 concentration,extraction time and solid-liquid ratio were obtained by single factor experiments.The formation mechanism of MaPa and its interaction with HT were analyzed by FTIR,^(1)H-NMR and density functional theory(DFT)calculation.Then,MaPa-4 and water extracts obtained under the optimal extraction conditions were selected for a series of efficacy tests.MaPa-4 extract demonstrated low cytotoxicity,good biocompatibility,and excellent antiinflammatory and bacteriostatic properties.Overall,MaPa-4,as an environmentally friendly and efficient solvent,was combined with ultrasound treatment to develop an efficient,green and feasible method to extract HT from olive leaves.

Effects of Metal Ions and Organic Solvents on Alkaline Phosphatase from Rice-field Eel

[Objective]The mechanism of alkaline phosphatase（ALP） was studied to promote rice-field eel aquaculture industry. [ Method] The effects of effectors such as multiple metal ions and organic solvents on ALP in viscera of rice-field eel. [ Result] Na^＋ and K ^＋ didn＇t generate big influences on enzyme activity;Mg^2＋ and Ca^2＋ could promote ALP while Li^＋,Cu^2＋ and Zn^2＋ could restrain ALP enzyme activity. Both HPO4^2- and WO4^2- generated by en- zyme catalyzing disodium phenyl phosphate possessed strong inhibitory effects on emzymc, and 9.5 mmol/L HPO4^2 - would make enzyme activity decline by 13% while 9.5 mmol/L WO4^3- would make enzyme decline by 34%. The inhibition types of them were both competitive inhibition on enzyme activity. The organic solvents such as methanol, ethanol,ethylene glycol,isopropannl all generated influences on ALP and the order according to their inhibitory effects was isopropanol 〉 ethanol 〉 methanol 〉 ethylene glycol. [ Conclusion] The inflncnces of various effeetors on ALP aetivity of rice-field eel were studied from dynamics perspective to provide theoretical basis for further clarifying ALP mechanism.

Application of deep eutectic solvents in biomass pretreatment and conversion

Biomass is renewable, abundant, cheap, biocompatible, and biodegradable materials and has been used to produce chemicals, materials,energy, and fuels. However, most of the biomass, especially most of the biomass polymers are not soluble in common solvents, which hinders their pretreatment and conversion. Deep eutectic solvents(DESs) are environmental-friendly, cheap, and highly tunable, with high solubility,which renders them potential applications in biomass pretreatment and conversion. They could be used as solvents or catalysts and so on. This paper intends to review the application of DESs for the pretreatment of biomass and conversion of biomass to value-added products. We focus on the following topics related to biomass and DESs:(1) DESs for the pretreatment of biomass;(2) DESs for the dissolution and separation of biomass or extraction of chemicals from biomass;(3) DESs for biomass conversion;(4) Drawbacks, and recyclability of DESs for pretreatment and conversion of biomass.

Diels-Alder Addition of Dicyclopentadiene with Cyclopentadiene in Polar Solvents

Diels-Alder addition of dicyclopentadiene and cyclopentadiene in polar solvents has been studied to produce tricyclopentadiene（TCPD） that is a potential high-density fuel precursor. GC and MS analysis shows that the adducts contain two isomers, namely exo- and endo-TCPD. Theoretical simulation shows that although the transition state of endo-TCPD has a lower activation energy, exo-TCPD is thermodynamically preferred. Polar solvents can accelerate the reaction rate and improve the exo/endo ratio of TCPD because the transition state of exo-TCPD has a higher polarity than that of endo-TCPD. The solvent effect follows the order of polarity： benzyl methanol〉cyclohexanone〉toluene. The conversion rises when the temperature ranges from 120 to 150 ℃, but the selectivity of TCPD slightly decreases. Increasing the pressure can improve the conversion but the exo/endo ratio of TCPD is unchanged. The apparent kinetics in different solvents was determined via nonlinear regression. The activation energies are 99.47, 101.15, and 107.32 kJ/mol for benzyl methanol, cyclohexanone, and toluene, respectively. The optimal reaction conditions are as follows： benzyl methanol as solvent, temperature 150 ℃, and pressure 900 kPa. After an 11-hour reaction, a conversion of 58.0%, a TCPD selectivity of 95.7%, and an exo/endo ratio of 1/5.3 has been obtained.

The use of environmentally sustainable bio-derived solvents in solvent extraction applications——A review

Replacement of volatile organic compounds （VOCs） by greener or more environmentally sustainable solvents is becoming increasingly important due to the increasing health and environmental concerns as well as economic pressures associated with VOCs. Solvents that are derived from biomass, namely bio-derived solvents, are a type of green solvent that have attracted intensive investigations in recent years because of their advantages over con- ventional VOCs, such as low toxicity, biodegradability and renewability. This review aims to summarize the use of bio-derived solvents in solvent extraction applications, with special emphasis given to utilization of biodiesels and terpenes. Compared with the conventional VOCs, the overall performance of these bio-derived solvents is comparable in terms of extraction yields and selectivity for natural product extraction and no difference was found for metal extraction. To date most researchers have focused on laboratory scale thermodynamics studies. Future work is required to develop and test new bio-derived solvents and understand the kinetic performance as well as solvent extraction nilnt nlant studies.

Catalytic oxidative desulfurization of fuels in acidic deep eutectic solvents with [(C_6H_(13))_3P(C_(14)H_(29))]_3PMo_(12)O_(40) as a catalyst

Deep eutectic solvents(DESs) are a new class of green solvents analogous to ionic liquids due to their biodegradable capacity and low cost. However, the direct extractive desulfurization of diesel oil by DESs cannot meet the government’s standard. In this work, amphiphilic polyoxometalates were synthesized and characterized by FT-IR and mass spectrometry.The oxidative desulfurization results showed that benzothiophene(BT) could be completely removed by employing a [(CH)P(CH)]PMoO, DES(ChCl/2 Ac) and HOsystem. It was also found that the organic cation of catalysts played a positive role in oxidative desulfurization. The reaction conditions, such as reaction temperature and time, the amount of catalyst and DES and HO/S(O/S) molar ratio, were optimized. Different sulfides were tested to determine the desulfurization selectivity of the optimal reaction system, and it was found that 97.2% of dibenzothiophene(DBT) could be removed followed by 80.7% of 4-MDBT and 76.0% of 4,6-DMDBT. After reaction, the IR spectra showed that the catalyst [(CH)P(CH)]PMoOwas stable during the reaction process and the oxidative product was dibenzothiophene sulfone(DBTO). Furthermore, the catalyst can be regenerated and recycled for four runs with little loss of activity.

Simultaneous Removal of H_2S and Organosulfur Compounds from Liquefied Petroleum Gas Using Formulated Solvents: Solubility Parameter Investigation and Industrial Test

The performance of four formulated solvents(labeled as UDS-I, UDS-II, UDS-III, and UDS-IV) for removing methyl mercaptan from liquefied petroleum gas was predicted based on a two-dimensional solubility parameter theory. The calculation results show that UDS-IV has the closest solubility parameter to that of methyl mercaptan as compared with other tested solvents, indicating the strongest affinity and the highest solubility for methyl mercaptan. The industrial tests at a plant for desulfurization of LPG produced from the delayed coker have shown that the UDS solvents have the excellent performance for removal of organosulfur compounds(mainly methyl mercaptan). Although the sulfur loading dramatically increases, the total sulfur content of LPG treated with UDS-IV can be reduced by about 50% in comparison with N-methyl diethanolamine. In addition, UDS-IV has superior regeneration performance and selectivity for sulfur compounds over hydrocarbons. The industrial test and the solubility parameter calculation results are in good agreement with each other.

SCREENING FOR ANTIBACTERIAL AND ANTIFUNGAL ACTIVITIES IN SOME MARINE ALGAE FROM THE FUJIAN COAST OF CHINA WITH THREE DIFFERENT SOLVENTS

Three different solvents viz ethanol, acetone and methanol toluene (3:1) were used to extract antibiotics from 23 species of marine algae belonging to the Chlorophyta, Phaeophyta and Rhodophyta. Their crude extracts were tested for antibacterial and antifungal activities. Among them, the ethanol extract showed the strongest activity against the bacteria and fungi tested. Four species of the Rhodophyta ( Laurencia okamurai, Dasya scoparia, Grateloupia filicina and plocamium telfairiae ) showed a wide spectrum of antibacterial activity. Every solvent extract from the four species was active against all the bacteria tested. The test bacterium Pseudomonas solancearum and the fungus Penicilium citrinum were most sensitive to the extracts of marine algae. In general, the extracts of seaweeds inhibited bacteria more strongly than fungi and species of the Rhodophyta showed the greatest activity against the bacteria and fungi tested.