Effect of Long-Term Fertilization on Soil Enzyme Activities Under Different Hydrothermal Conditions in Northeast China

Human activities have altered weather patterns by causing an increase in greenhouse gas. The effects of climate change have been studied, including effects on some ecosystems throughout the world. There are many studies on changes in the soil due to climate change, but much of them did not extend their research to soil enzyme that integrates information on soil microbial status and soil physical-chemical conditions. Meanwhile, there are lots of experimental fields established to study effects of long-term fertilization on soil enzyme activities, but many did not compare the difference of soil enzyme activities and did not analyze the effect of climatic factors on soil enzyme activities with long-term fertilization under different hydrothermal conditions. In this study, we compared soil enzyme activities of three long-fertilization stations which had different hydrothermal conditions in Northeast China, and analyzed the relationship of hydrothermal condition, soil chemical properties with soil enzyme activities. Hydrothermal conditions （annual temperature and total rainfall） decreased in order of Gongzhuling （Jilin Province, China ） Harbin （Heilongjiang Province, China） Heihe （Heilongjiang Province, China） over the course of the long-term fertilization experiment. Sunshine hours showed the longest in Gongzhuling, the second in Heihe, and the last in Harbin. However, the order of soil enzymes was not in agreement with hydrothermal conditions. Overall, the order of soil enzymes for the same treatment among three stations was consistent in 2008 with in 2009. Correlation analysis demonstrated that different soil enzymes achieved the different affected levels by climatic factors under different fertilization treatments. Urease activity showed a significant relationship with sunshine hours in no fertilizer （CK） treatment （R=-0.91, P0.01） and relative humidity in mineral fertilizers plus manure （MNPK） treatment （R=0.82, P0.05）. Phosphatase activity exhibited a negative correlation with annual mean temperature, annual mean maximum temperature and annual mean minimum temperature, and their correlation coefficients were separately -0.83, -0.79, and -0.83 at P0.05 in CK treatment. Invertase activity was highly and positively correlated with sunshine hours in CK treatment （R=0.94, P0.01）. Catalase activity showed significant negative correlations with minimum relative humidity in CK treatment （R=-0.81, P0.05）, and positive correlations with sunshine hours in M treatment （R=0.83, P0.05）. There were no climatic factors which strongly affected on dehydrogenase in all treatments. Soil enzyme activities were closely related to the soil chemical properties. Soil urease activity was positively correlated with available P （P0.05）. With exception of correlation between invertase and total P at P0.05, phosphase, invertase, catalase, and dehydrogenase showed significant positive correlations with soil chemical properties （P0.01）. It was a comprehensive process that biologic and abiotic factors were effect on soil enzyme activities under different fertilization treatments. To sum up, the variation of hydrothermal conditions in different climate zones and soil chemical properties affect integrally metabolic activity and metabolic finger print of microbial communities in black soil.

Projection of hydrothermal condition in Central Asia under four SSP-RCP scenarios

Hydrothermal condition is mismatched in arid and semi-arid regions,particularly in Central Asia(including Kazakhstan,Kyrgyzstan,Tajikistan,Uzbekistan,and Turkmenistan),resulting many environmental limitations.In this study,we projected hydrothermal condition in Central Asia based on bias-corrected multi-model ensembles(MMEs)from the Coupled Model Intercomparison Project Phase 6(CMIP6)under four Shared Socioeconomic Pathway and Representative Concentration Pathway(SSP-RCP)scenarios(SSP126(SSP1-RCP2.6),SSP245(SSP2-RCP4.5),SSP460(SSP4-RCP6.0),and SSP585(SSP5-RCP8.5))during 2015-2100.The bias correction and spatial disaggregation,water-thermal product index,and sensitivity analysis were used in this study.The results showed that the hydrothermal condition is mismatched in the central and southern deserts,whereas the region of Pamir Mountains and Tianshan Mountains as well as the northern plains of Kazakhstan showed a matched hydrothermal condition.Compared with the historical period,the matched degree of hydrothermal condition improves during 2046-2075,but degenerates during 2015-2044 and 2076-2100.The change of hydrothermal condition is sensitive to precipitation in the northern regions and the maximum temperatures in the southern regions.The result suggests that the optimal scenario in Central Asia is SSP126 scenario,while SSP585 scenario brings further hydrothermal contradictions.This study provides scientific information for the development and sustainable utilization of hydrothermal resources in arid and semi-arid regions under climate change.

Evaluating Spatial Heterogeneity of Land Surface Hydrothermal Conditions in the Heihe River Basin

Land surface hydrothermal conditions(LSHCs) reflect land surface moisture and heat conditions, and play an important role in energy and water cycles in soil-plant-atmosphere continuum. Based on comparison of four evaluation methods(namely, the classic statistical method, geostatistical method, information theory method, and fractal method), this study proposed a new scheme for evaluating the spatial heterogeneity of LSHCs. This scheme incorporates diverse remotely sensed surface parameters, e.g., leaf area index-LAI, the normalized difference vegetation index-NDVI, net radiation-Rn, and land surface temperature-LST. The LSHCs can be classified into three categories, namely homogeneous, moderately heterogeneous and highly heterogeneous based on the remotely sensed LAI data with a 30 m spatial resolution and the combination of normalized information entropy(S’) and coefficient of variation(CV). Based on the evaluation scheme, the spatial heterogeneity of land surface hydrothermal conditions at six typical flux observation stations in the Heihe River Basin during the vegetation growing season were evaluated. The evaluation results were consistent with the land surface type characteristics exhibited by Google Earth imagery and spatial heterogeneity assessed by high resolution remote sensing evapotranspiration data. Impact factors such as precipitation and irrigation events, spatial resolutions of remote sensing data, heterogeneity in the vertical direction, topography and sparse vegetation could also affect the evaluation results. For instance, short-term changes(precipitation and irrigation events) in the spatial heterogeneity of LSHCs can be diagnosed by energy factors, while long-term changes can be indicated by vegetation factors. The spatial heterogeneity of LSHCs decreases when decreasing the spatial resolution of remote sensing data. The proposed evaluation scheme would be useful for the quantification of spatial heterogeneity of LSHCs over flux observation stations toward the global scale, and also contribute to the improvement of the accuracy of estimation and validation for remotely sensed(or model simulated) evapotranspiration.

Sintering of Doped, Nanocrystalline CeO_2 Powders Prepared under Hydrothermal Conditions

Nanocrystalline CeO2 powders (particle size ≈10-15 nm), doped with up to 20 at.-% of Mg,Ca or Y were prepared by chemical precipitation under hydrothermal conditions. The particle size and shape of the powders change slightly with the dopant concentrations. The the of the dopants on the sintering of the compacted powders was investigated during heating at a constant rate of 10℃/min. The elemental composition and the concentration of the dopant has significant efFect on the densification and grain growth. Compared to undoped CeO2, the dopants produce a shift in the densification curve to higher temperatures. For the same dopant concentration and under identical sintering conditions, the Ca doped samples reach nearly full density with the smallest grain size (≈50 nm), however, the Mg doped sample has the lowest density (≈95% of the theoretical) with the largest grain size (≈1 μm)

Dissolubility of Hydroxyapatlte Powder under Hydrothermal Condition

The dissolubility of hydroxyapatite(HA) in the hydrothermal solution was investigated in Mo-rey-type autoclave over a temperature range of 150 to 350℃ and the pH value range of 5 to 9. It is shown that the dissolubility of HA is determined as a function of temperature and time under a constant filling ratio of autoclave , and the temperature coefficient for the solubility of HA is positive. The equilibrium time attained in the hydrothermal solution is shortened with the increase of hydroihermal temperature, and the effect of temperature on the solubility is obviously stronger than that of pH value. The solubility data suggest that HA has higher dissolubility in the HA-H2 O system under the hydrothermal condition than that under the normal temperature-pressure.

One-step Synthesis of 5-Ethyl-2-methylpyridine from NH4HCO3 and C2H5OH Under Hydrothermal Condition

A simple one-pot approach to synthesizing 5-ethyl-2-methylpyridine（EMP） was established using NHaHCO3 and C2H5OH as starting materials and commercial Cu2O as catalyst and oxidant under hydrothermal con- dition. Different reaction conditions were researched and the optimal ones were achieved by studying the parameters, that could affect the yield of product and by considering the energy and resource saving. The present study provided an eco-friendlv way to obtaining EMP with lower volatility using fewer toxic starting materials.

Assessing the Performance of CMIP6 Models in Simulating Droughts across Global Drylands

Both the attribution of historical change and future projections of droughts rely heavily on climate modeling. However,reasonable drought simulations have remained a challenge, and the related performances of the current state-of-the-art Coupled Model Intercomparison Project phase 6(CMIP6) models remain unknown. Here, both the strengths and weaknesses of CMIP6 models in simulating droughts and corresponding hydrothermal conditions in drylands are assessed.While the general patterns of simulated meteorological elements in drylands resemble the observations, the annual precipitation is overestimated by ~33%(with a model spread of 2.3%–77.2%), along with an underestimation of potential evapotranspiration(PET) by ~32%(17.5%–47.2%). The water deficit condition, measured by the difference between precipitation and PET, is 50%(29.1%–71.7%) weaker than observations. The CMIP6 models show weaknesses in capturing the climate mean drought characteristics in drylands, particularly with the occurrence and duration largely underestimated in the hyperarid Afro-Asian areas. Nonetheless, the drought-associated meteorological anomalies, including reduced precipitation, warmer temperatures, higher evaporative demand, and increased water deficit conditions, are reasonably reproduced. The simulated magnitude of precipitation(water deficit) associated with dryland droughts is overestimated by 28%(24%) compared to observations. The observed increasing trends in drought fractional area,occurrence, and corresponding meteorological anomalies during 1980–2014 are reasonably reproduced. Still, the increase in drought characteristics, associated precipitation and water deficit are obviously underestimated after the late 1990s,especially for mild and moderate droughts, indicative of a weaker response of dryland drought changes to global warming in CMIP6 models. Our results suggest that it is imperative to employ bias correction approaches in drought-related studies over drylands by using CMIP6 outputs.

Hydrothermal Syntheses,Crystal Structures,TGA and Electrochemistry Properties of Two Metal-organic Coordination Compounds Based on 4'-((1H-1,2,4-triazol-1-yl)methyl)-[1,1'-biphenyl]-2-carbonitril

Two novel metal-organic coordination compounds with molecular structures of {[Co（TMBC）4Cl2]·2H2O}（1） and {[Ni（TMBC）4Cl2]·2H2O}（2）（TMBC = 4＇-（（1H-1,2,4-triazol-1-yl）methyl）-[1,1＇-biphenyl]-2-carbonitrile）, have been synthesized under hydrothermal conditions of Co Cl2·6H2O and Ni Cl2·6H2O with 4＇-（（1H-1,2,4-triazol-1-yl）methyl）-[1,1＇-biphenyl]-2-carbonitrile, respectively. Both compounds crystallize in triclinic systems, space group P 1. They are characterized by single-crystal X-ray diffraction analysis, elemental analysis, IR spectroscopy and TGA. Moreover, their electrochemical behaviors have also been studied in different electrolyte solutions, respectively.

Mechanical strength and the degradation mechanism of metakaolin based geopolymer mixed with ordinary Portland cement and cured at high temperature and high relative humidity

Geopolymer is a new type of eco-friendly cementitious material, and its superior drying and high temperature resistance has been widely recognized. The service performance of geopolymer under 150 ℃ high-temperature hydrothermal conditions is still less discussed. In this paper, the mechanical strength of pure metakaolin system with low calcium content and metakaolin-cement system with high calcium content under hydrothermal and non-hydrothermal conditions were studied. The results show that under 150 ℃ hydrothermal conditions, the strength of pure metakaolin geopolymer sharply decreases by reduction rate of 81.8% compared to the sample under 150 ℃ drying conditions, while the strength of metakaolin-cement geopolymers is well retained with only a slight decrease of 14.4%. This is mainly because the predominantly hydration product sodium aluminosilicate(N-A-S-H) gel of pure metakaolin system undergoes the process of “dissociation–repolymerization–crystallization” under 150 ℃ hydrothermal conditions, resulting in the loss of cementation ability and obvious deterioration of mechanical strength. In the metakaolin-cement system, the high-calcium calcium silicate gel(C-A-S-H)gel maintains a stable structure, thereby maintaining the macroscopic strength of the material under the hydrothermal conditions.

Synthesis,Structure,and Luminescent and Dielectric Properties of Two Novel 1D Chains Based on a T-Shaped Tripodal Ligand 4-(4,5-Dicarboxy-1H-imidazol-2-yl)pyridine Loxide

Two 1D chain metal-organic framework complexes, {Co[（C10H5N3O5）- （H2O）2？H2O]}n （1） and {Cd[（C10H5N3O5）（H2O）2]}n （2）, based on a T-shaped tripodal ligand 4-（4,5-dicarboxy- 1H-imidazol-2-yl） pyridine 1-oxide （H3DCImPyO） have been reacted under hydrothermal conditions, and were characterized by single-crystal X-ray structure analysis, fluorescent analysis and thermal gravimetric analysis. According to single-crystal X-ray determination, complex 1 crystallizes in the monoclinic system, space group P21/n with a = 9.4930（13）, b = 13.2024（18）, c = 10.5203（14） A^°, β = 98.402（2）°, Z = 4, V = 1304.4（3）A^°3; and complex 2 crystallizes in the monoclinic system, space group C2/c with a = 13.557（3）, b = 13.568（3）, c = 6.7804（13） A^°, β = 105.095（2）°, Z = 4 and V = 1204.2（4） A^°3. Fluorescent analysis of complex 2 showed an intense emission band at 466 nm when the exciting radiation was set at 360 nm. Dielectric constants of complexes 1 and 2 were measured at different frequencies with temperature variation.

Frictional stability of Longmaxi shale gouges and its implication for deep seismic potential in the southeastern Sichuan Basin

Microearthquakes accompanying shale gas recovery highlight the importance of exploring the frictional and stability properties of shale gouges.Aiming to reveal the influencing factors on fault stability,this paper explores the impact of mineral compositions,effective stress and temperature on the frictional stability of Longmaxi shale gouges in deep reservoirs located in the Luzhou area,southeastern Sichuan Basin.Eleven shear experiments were conducted to define the frictional strength and stability of five shale gouges.The specific experimental conditions were as follows:temperatures:90–270°C;a confining stress:95 MPa;and pore fluid pressures:25–55 MPa.The results show that all five shale gouges generally display high frictional strength with friction coefficients ranging from 0.60 to 0.70 at the aforementioned experiment condition of pressures,and temperatures.Frictional stability is significantly affected by temperature and mineral compositions,but is insensitive to variation in pore fluid pressures.Fault instability is enhanced at higher temperatures(especially at>200°C)and with higher tectosilicate/carbonate contents.The results demonstrate that the combined effect of mineral composition and temperature is particularly important for induced seismicity during hydraulic fracturing in deep shale reservoirs.

Fluorescence Properties and Crystal Structures of Metal-organic Coordination Complexes Based on the 2,6-Naphthalenedicarboxylic Acid

Two metal-organic coordination complexes, [Zn（2,6-ndc）（1,2-bix）]n（1） and [Zn（2,6-ndc）（1,3-bix）]n（2）（2,6-H2ndc = 2,6-naphthalenedicarboxylic acid, 1,2-bix = 1,2-bis（imidazole-1-ylmethyl）-benzene and 1,3-bix = 1,3-bis（imidazole-1-ylmethyl）-benzene） have been synthesized by the hydrothermal method. Though the two complexes both crystallize in a triclinic system, space group P1 and show similar two-dimensional structures, weak intermolecular interactions（π-π packing interactions） only exist in complex 2. They are characterized by single-crystal X-ray diffraction analysis, fluorescence measurement, IR spectroscopy and TGA. Moreover, the solid-state fluorescence spectra of two complexes show maximal emission peaks at 365（λ（ex） = 329 nm） and 367 nm（λex = 344 nm）, respectively.

Reactions between olivine and CO2-rich seawater at 300℃:Implications for H2 generation and CO2 sequestration on the early Earth

To understand the influence of fluid CO2 on ultramafic rock-hosted seafloor hydrothermal systems on the early Earth,we monitored the reaction between San Carlos olivine and a CO2-rich NaCl fluid at 300 C and 500 bars.During the experiments,the total carbonic acid concentration（∑XO2） in the fluid decreased from approximately 65 to 9 mmol/kg.Carbonate minerals,magnesite,and subordinate amount of dolomite were formed via the water-rock interaction.The H2 concentration in the fluid reached approximately 39 mmol/kg within 2736 h,which is relatively lower than the concentration generated by the reaction between olivine and a CO2-free NaCl solution at the same temperature.As seen in previous hydrothermal experiments using komatiite,ferrous iron incorporation into Mg-bearing carbonate minerals likely limited iron oxidation in the fluids and the resulting H2 generation during the olivine alteration.Considering carbonate mineralogy over the temperature range of natural hydrothermal fields,H2 generation is likely suppressed at temperatures below approximately 300℃ due to the formation of the Mg-bearing carbonates.Nevertheless,H_2 concentration in fluid at 300℃ could be still high due to the temperature dependency of magnetite stability in ultramafic systems.Moreover,the Mg-bearing carbonates may play a key role in the ocean-atmosphere system on the early Earth.Recent studies suggest that the subduction of carbonated ultramafic rocks may transport surface CO2 species into the deep mantle.This process may have reduced the huge initial amount of CO2 on the surface of the early Earth.Our approximate calculations demonstrate that the subduction of the Mg-bearing carbonates formed in komatiite likely played a crucial role as one of the CO2 carriers from the surface to the deep mantle,even in hot subduction zones.

A readily monitored and controllable hydrothermal system for the facile,cost-effective transformation of FGD gypsum to calcium sulfate hemihydrate whiskers

The controllable transformation of flue gas desulfurization(FGD)gypsum to calcium sulfate hemihydrate(HH)whiskers under facile,readily monitored,and cost-effective hydrothermal conditions could play a vital role in the preparation of high quality HH whiskers and improve our understanding of the transformation process.This work assessed the conversion of FGD gypsum to HH whiskers in 5×10^(-4)mol/L H_(2)SO_(4)and 1.5 wt%CuCl_(2)at 120℃while determining the effects of temperature as well as H_(2)SO_(4)and CuCl_(2)concentrations on transformation kinetics.The preparation of HH whiskers was found to involve a solution-mediated transformation from the dihydrate(DH)to theα-HH.This transition was determined to proceed via a dissolution crystallization mechanism,the rate of which was controlled by nucleation and growth of the HH whiskers.An autocatalytic kinetic model was established based on variations in the HH whiskers mole fraction over time,and this model accurately fit the experimental data with R2=0.990.Increasing the temperature or H_(2)SO_(4)concentration accelerated the transformation by modifying the super-saturation and water activity in the reaction solution,while increasing the CuCl_(2)concentration had the opposite effect.The hydrothermal conditions had an important effect on the transformation from FGD gypsum to HH whiskers.

Possible solutions for sludge dewatering in China

In China,over 1.43×10^(7)tons of dewatered sewage sludge,with 80%water content,were generated from wastewater treatment plants in 2007.About 60%of the COD removed during the wastewater treatment process becomes concentrated as sludge.Traditional disposal methods used by municipal solid waste treatment facilities,such as landfills,composting,or incineration,are unsuitable for sludge disposal because of its high water content.Disposal of sludge has therefore become a major focus of current environmental protection policies.The present status of sludge treatment and disposal methodology is introduced in this paper.Decreasing the energy consumption of sludge dewatering from 80%to 50%has been a key issue for safe and economic sludge disposal.In an analysis of sludge water distribution,thermal drying and hydrothermal conditioning processes are compared.Although thermal drying could result in an almost dry sludge,the energy consumption needed for this process is extremely high.In comparison,hydrothermal technology could achieve dewatered sewage sludge with a 50%–60%water content,which is suitable for composting,incineration,or landfill.The energy consumption of hydrothermal technology is lower than that required for thermal drying.