Rare earth element geochemistry of hydrothermal deposits from Southwest Indian Ridge

The REE compositions of hydrothermal deposits and basalt samples from the Southwest Indian Ridge （SWIR） were determined with ICP-MS. The results show that there are significant differences between different types of samples although all samples show relative LREE enrichment. The contents of REE in hydrothermal sulfides and alterated rocks samples are lower （from 7.036× 10^-6 to 23.660×10^-6）, while those in the white chimney deposits are relatively higher （ranging from 84.496 × 10^-6 to 103.511 × 10^- 6）. Both of them are lower than basalts. Chondrite-normalized REE distribution patterns show that sulfides and alterated rocks samples are characterized by significant positive Eu anomalies. On the contrary, white chimney deposits have obvious negative Eu anomalies, which may be caused by abundant calcite existing in the white chimney samples. Both the content and distribution pattern of REE in sulfides suggest that REE most possibly is originally derived from hydrothermal fluids, but influenced by the submarine reducing ore-forming environment, seawater convection, mineral compositions as well as the constraint of mineral crystallizations.

Negative Haloes and Geochemical Field Systems of Hydrothermal Deposits

Primary haloes of hydrothermal deposits were previously considered as positive haloes. Although it has been recently suggested that primary haloes incude positive and negative ones, almost all the research work on primary haloes has still focused on positive haloes for various reasons. In order to understand the source of ore substances a number of large hydrothermal deposits related to magmatism including porphyry, skarn and vein type deposits have been studied. It has been found that negative haloes exist on the peripheries of positive haloes of a mineral deposit. On the basis of the study the authors propose the concept of the geochemical field system of ore-forming elements of hydrotherreal deposits, i. e., with the orebody as the centre outwards there occur the mineralized field, positive halo field, depleted field and background field successively.

Preparation of Chromium Oxide Coatings on Aluminum Borate Whiskers by a Hydrothermal Deposition Process

Aluminum borate whiskers (9Al 2O 3·2B 2O 3) can be used to reinforce aluminum alloys to produce light and strong composites. However, the adverse interfacial reactions between the whiskers and the aluminum alloys inhibit their practical uses; therefore, a protective coating is needed on whiskers. In this work, aluminum borate whiskers were coated with chromium coating deposits in a hydrothermal solution containing CrCl 3, Na 2C 4H 4O 6, NaPH 2O 2, and H 3BO 3. The presence of the impurity P in the hydrothermal deposits can be avoided by reducing the amount of NaPH 2O 2 in the coating solution. Thermodynamic analysis was used to discuss the behavior of ions in the coating process. The subsequent heating of the hydrothermal products in air at 800 ℃ yielded smooth Cr 2O 3 films with a thickness of 0.060.07 μm.

Mineralization of the Liwu large-scale stratiform copper deposits in Sichuan Province, China: Constraints from fluid inclusions

The Liwu stratiform copper deposit is located in the northwestern Jianglang dome,western China.Current studies mainly focus on the genetic type and mineralization of this deposit.Detailed fluid inclusion characteristics of metallogenic period quartz veins were studied to reveal the ore-forming fluid features.Laser Raman analysis indicates that the ore-forming fluids is a H_(2)O-NaCl-CH_(4)(-CO_(2))system.Fluid inclusions microthermometry shows a homogenization temperature of 181-375°C and a salinity of 5.26%-16.99%for the disseminated-banded Cu-Zn mineralization;but a homogenization temperature of 142-343°C and a salinity of 5.41%-21.19%for the massive-veined Cu-Zn mineralization.These features suggest a medium-high temperature and a medium salinity for the ore-forming fluids.H-O isotopic data indicates that the ore-forming fluids were mainly from the metamorphic and magmatic water,plus minor formation water.And sulfur isotopic data indicates that sulfur was mainly derived from the formation and magmatic rocks.Metallogenesis of the disseminated-banded mineralization was mainly correlated with fluid mixing and water-rock reaction;whereas that of the massive-veined mineralization was mainly correlated with fluid boiling.The genetic type of the deposit is a medium-high temperature hydrothermal deposit related to magmatism and controlled by shear zones.This study is beneficial to understand the stratiform copper deposit.

Geochemistry of Rare Earth Elements in Hydrothermal Ore Deposit in Heishan Area,Shaanxi Province

The study on rare earth elements in hydrothermal ore deposit in Heishan area indicates that the REE concentration in rock with very weak negative Ce and Eu anomaly is far higher than those in ore. The REE pattern in ore is characterized by very low REE concentration, typical enrichment in LRE and distinctive negative Eu and Ce anomaly. δ Eu and δ Ce values vary from 0 51～0 6 to 0 71～0 77 and 0 84～0 88 to 0 60～0 78, respectively, as shown in samples from Fe Cu ore to Au ore. Different δ Eu and δ Ce values reveal that temperature gradually decreases and oxygen fugacity gradually increases when ore bearing hydrothermal solution evolves from early to late stage. It is likely that REE in solution is mainly transported in the forms of(RE(CO 3) 3F) 4- , (RE(CO 3)F 2) -, (RE(F,Cl) 2) + , (RE(CO 3) 3) 3- and (RE(CO 3) 4) 5- complexes.

Metallogenic Regularity of Hydrothermal Uranium Deposits in the Migmatite of the Kangdian Axis

1 Introduction The Kangdian axis is an important polymetallic metallogenic belt in Southwest China,and it is also an area with a lot of hydrothermal uranium mineralization(Wang Hongjun,et al.,2009.The basic

+-Evidence of Porphyry Deposits in the Ntem Complex: A Case Study from Structural and Hydrothermal Alteration Zones Mapping through Landsat-8 OLI, Aeromagnetic and Geological Data Integration in the Yaounde-Sangmelima Region (Southern Cameroon)

A semi-regional study was carried out in the Yaounde-Sangmelima area, a densely vegetated tropical region of southern Cameroon located in the Central Africa Fold Belt (CAFB)/Congo Craton (CC) transition zone. Towards structural lineaments and predictive hydrothermal porphyry deposits mapping, an integrated analysis of Landsat-8 OLI data, aeromagnetic, geological and mineral indices maps was performed. The Remote sensing using False colour composite images involving bands combinations and Crosta method (features oriented principal components analysis) enabled the mapping of the gneisses and schists domains without a clear differentiation between the Yaounde and Mbalmayo schists;despite the reflectance anomalies evidenced NW of Akonolinga, hydrothermal alterations in the study area failed to be detected. Besides, aeromagnetics depicted a moderately fractured northern zone (the CAFB) contrasting with a high densely fractured zone (the CC, known as Ntem complex). The Ntem complex displays signatures of a meta-igneous, an intrusive complex, greenstone relics south of Sangmelima and hydrothermal activity. Indeed, CET porphyry analysis tool detected many porphyry centres. In general, the study revealed many lineaments including contacts, fractures faults zones and strike-slips. The major aeromagnetics structures are SW-NE to WSW-ENE and WNW-ESE to NW-SE while those from Landsat-8 are NE-SW, WNW-ESE, NW-SE, WSW-ENE and NW-ESE to NNW-SSE. Together, these structures depict trans-compressions or trans-tensions corresponding to a broad NE-SW strike-slips channel that affect both the CAFB and the Ntem Complex, and they control the intrusions thus confirming a pervasive hydrothermal activity within the Ntem Complex. The proximity or coincidence of these porphyry centres with some mapped Iron-Gold affiliated mineral indices and porphyry granites indicate the possible occurrence of many hydrothermal ore deposits. These results show the high probability for the Ntem complex to host porphyry deposits so they may serve to boost mineral exploration in the Yaounde-Sangmelima region and in the entire southern Cameroon as well.

Magmatic Hydrothermal Origin of the Wenyu Copper Polymetallic Deposit, Southern Lancangjiang Zone, SW China

The Wenyu copper polymetallic deposit, with proven reserves of about 0.23 Mt Cu, 394 t Ag and 0.04 Mt Pb, is located in the central part of the Lancangjiang volcanic rock belt （Fig. l a）, which is one of the most potential copper polymetallic exploration areas in SW China.

PRACTICAL AND PREDICTIVE MODELLING OF ORE DEPOSITS IN HYDROTHERMAL SYSTEMS

Over the pastfive years,we have been making efforts to develop a practical and predic- tive tool to exploreforgiantore deposits in hydrothermal systems. Towards this goal,a sig- nificant progress has been made towards a better understanding of the basic physical and chemical processes behind ore body formation and mineralization in hydrothermal systems. On the scientific developmentside,we have developed analytical solutions to answerthe fol- lowing scientific questions:(1) Can thepore- fluid pressure gradientbemaintained atthe val- ue of the lithostaticpressure gradientin the uppercrustof the Earth?and(2 ) Can convective pore- fluid flow take place in the uppercrustof the Earth ifthere is a fluid/mass leakage from the mantle to the upper crustof the Earth?On the modelling developmentside,we have developed numerical methods to model the following problems:(1) convective pore- fluid flow in two- dimensional hydrothermal systems;(2 ) coupled reactive pore- fluid flow and multiple species transport in porous media;(3) precipitation and dissolution of minerals and rock al- teration in the upper crust of the Earth;(4 ) double diffusion driven reactive flow transport in deformable fluid- saturated porous media with particular consideration of temperature- de- pendentchemical reaction rates;(5 ) pore- fluid flow patterns neargeological lenses in hydro- dynamic and hydrothermal systems;(6 ) dissipative structures for nonequilibrium chemical reactions in fluid- saturated porousmedia;(7) convectivepore- fluid flow and the related min- eralization in three- dimensional hydrothermal systems;(8) fluid- rock interaction problems associated with the rock alteration and metamorphic process in fluid- saturated hydrothermal/ sedimentary basins;and (9) various aspects of the fully coupled problem involving material deformation,pore- fluid flow,heattransferand species transport/ chemical reactionsin pore- fluid saturated porous rock masses. The above- mentioned work has significantly enriched our knowledge about the physical and chemical processes related to ore body formation and mineralization in the upper crustof the

Numerical simulation for fluids mixing within seafloor hydrothermal sulfide deposit:taking the Trans-Atlantic Geo-Traverse (TAG) field for example

The formation mechanism of the large hydrothermal sulfide deposit is a complex geological process involving many controlling factors. Mixing between hydrothermal fluid and seawater plays a key role in this process. The results of the Ocean Drilling Program （ODP） indicate that mixing of the evolved seawater and hydrothermal fluid, which is wildly developed within the Trans-Atlantic Geo-Traverse （TAG） hydrothermal deposit, governs the internal structure and chemical compositions of the deposit to great extent. Taking the TAG field for example, the mixing processes of hydrothermal fluid with the seawater heated to different extent are calculated, so as to discuss the impact of hydrothermal fluid/seawater mixing on the formation process of the sulfide deposit. The results indicate that： （1） mixing between the heated seawater and hydrothermal fluid derived from the deep deposit is largely responsible for the wild precipitation of anhydrite within the TAG hydrothermal deposit; （2） 330-310℃ is a special temperature range in the mixing process; （3） the mixing and hydrothermal processes in different zones of the TAG hydrothermal deposit （TAG-1, TAG-2 and TAG-5, etc.） have been discussed based on the simulated results.

Hot-Water Deposition of Pyritic Stromatolite and Its Relation to Biomineralization

Pyritic stromatolite, a rich pyrite ore, is scattered as reef masses in sedex deposits of the Proterozoic Yanshan rift trough. The pyritic stromatolite consists of a core and alternating concentric rims of light colloidal pyrite and dark organic materials. The concentric rims are cemented together by trichomes highly similar to the trichomic microorganisms inhabiting substantively around the black chimneys on the current sea beds while the core is composed chiefly of groups of thermophilous sulphur bacteria. Biomarkers for the molecules of pyritic stromatolite include pristane, phytane, regular isoprenoids paraffin, methyl-heptadecyl, and so on. This study reveals the existence of methane-yielding bacteria in the pyritic stromatolite and reflects the evolution of thermophilous thallophyta.

Characteristics and Genesis of Fine-Clastic Rock-Type Au Deposits in the Liaodong Rift

Gold deposits occurring in the Liaodong rift are located in interlayered carbonate rocks and fine-clastic rocks, belonging to the middle and upper parts of the lower Proterozoic. Compared with the Carlin-type Au deposits abroad and gold deposits in Yunnan-Guizhou-Guangxi, Qinling and western Sichuan Province, they are similar in many respects. This paper discusses the geological features of ore-bearing formations and ore-filling structures and metallogenetic characteristics. Through the discussion on the sources of ores, heat and water, it points out that the Au deposits belong to vadose reworked hydrothermal deposits. This conforms to the principle of “mineralization in the neighbouring areas”, i.e., the deposits are formed in nearby ore-bearing layers, and the latest hydrothermal event was the main factor in forming the Au deposits.

Onset and Stability of Thermally-Driven Fluid Convection in a Vertical Rock Crack and Their Implication for Hydrothermal Ore-Forming Processes

Dynamic equations controlling the thermally-driven fluid convection in a single rock crack are established in the paper . The critical criteria for the onset of convection in such a configuration are found by linear dynamic analysis of the equations and the stability of the convection discussed by nonlinear analysis method . The research demonstrates that the critical Rayleigh number has a magnitude 103. While the Rayleigh number R of real ore-forming fluids exceeds this value , the convection happens , and as R becomes larger , the fluid convection pattern develops from nonequilibrium steady states to double-periodically produced limit cycles and eventually to chaos (turbulences ).The implication of these dynamic analyses for the ore-forming processes of late-magma tic hydrothermal deposits is also discussed in the paper .

Characteristics of the ore forming fluid from the zinc poly-metallic deposit in the Mopan mine area,Guangxi Nandan

Fluid inclusions from samples from the layered and veined mineralized belt in the Mopan mine area were studied using microscopic temperature measurements and laser Raman spectroscopy.Further studies were conducted on the nature and source of the ore forming fluid and on the mechanism of deposit formation.The results show that there are three types of inclusions that occur in both the layered and veined ore body.These are liquid inclusions,CO 2 inclusions with a liquid phase,and NaCl-H 2 O multiphase inclusions.The fluid inclusions in both the layered and veined ore bodies have similar characteristics.The ore forming fluid is strongly reducing,was exposed to low to medium temperatures,salinity,and pressures.The source of this ore forming fluid was a mix of submarine volcanic spring(blow-piping),magmatic hydrothermal jet,and underground water.

U-Pb Geochronology and Geochemistry of Stratiform Garnet from the Aqishan Pb-Zn Deposit,Eastern Tianshan,Xinjiang,NW China:Constraints on Genesis of the Deposit

The Aqishan lead-zinc deposit,located in the Jueluotag metallogenic belt of eastern Tianshan,Xinjiang,Northwest China,has a stratiform occurrence in the marine volcanic tuff of the Yamansu Formation.The ore body has a typical double-layer structure,having a stratified,stratoid,lenticular upper part and a veined,stockwork-like lower part.The occurrence of the upper orebody is consistent with that of the volcanic tuff wall rock.The ore minerals are mainly chalcopyrite,pyrite,sphalerite,galena and magnetite,the altered minerals mainly being silicified,such as sericite,chlorite,epidote,garnet.The garnetized skarn,being stratiform and stratoid,is closely related to the upper part of the orebody.Geological observations show that the limestone in the ore-bearing Yamansu Formation is not marbleized and skarnized.Spatially,it is associated with the ferromanganese deposits in the marine volcanic rocks of the Yamansu Formation.These geological features reflect the likelihood that the Aqishan lead-zinc deposit is a hydrothermal exhalation sedimentary deposit.The results from the EPMA show that the garnet is mainly composed of grossular-andradite series,contents being in a range of 34.791-37.8%SiO_(2),32.493-34.274%CaO,8.454-27.275%FeO,0.012-15.293%Al_(2)O_(3),0.351-1.413%MnO,and lower values of 0.013-1.057%TiO_(2).The content of SiO_(2) vs.CaO and FeO vs.Al_(2)O_(3) has a significant positive correlation.The results of ICP-MS analysis for the garnet show that the REE pattern is oblique to right in general.The total amount of rare earth elements is relatively low,ΣREE=71.045-826.52 ppm,which is relatively enriched for LREE and depleted for HREE.LREE/HREE=8.66-4157.75,La_(N)/Yb_(N)=23.51-984.34,with obvious positive Eu and Ce anomalies(δEu=2.27-76.15,δCe=0.94-1.85).This result is similar to the REE characteristics of ore-bearing rhyolite volcanic rocks,showing that the garnet was formed in an oxidizing environment and affected by clear hydrothermal activity.The U-Pb isotopic dating of garnet by fs-LA-HR-ICP-MS gives an age of 316.3±4.4 Ma(MSWD=1.4),which is consistent with the formation time of the Yamansu Formation.According to the study of deposit characteristics and geochemical characteristics,this study concludes that the Aqishan lead-zinc deposit is a hydrothermal exhalation sedimentary deposit,the garnet being caused by hydrothermal exhalative sedimentation.

Influence of deposition voltage on phase, microstructure and antioxidation property of cristobalite aluminum phosphate coatings

Cristobalite aluminum phosphate (C-AlPO_4) coatings were prepared by a hydrothermal electrophoretic deposition process on SiC-coated C/C composites. Phase compositions and microstructures of the as-prepared coatings were characterized by XRD and SEM analyses. The influence of deposition voltage on the phase, microstructure and antioxidation property of the cristobalite aluminum phosphate coatings was investigated. Results show that the as-prepared coatings are composed of cristobalite aluminum phosphate crystallites. The thickness and density of cristobalite aluminum phosphate coatings are improved with the increase of deposition voltage. The deposition amount and bonding strength of the cristobalite aluminum phosphate coatings also increase with the increase of deposition voltage. The deposition mass per unit area of the coatings and the square root of the deposition time at different hydrothermal voltages satisfy linear relationship. The antioxidation property of the coated C/C composites is improved with the increase of deposition voltage. Compared with SiC coatings prepared by pack cementation, the multilayer coatings prepared by pack cementation with a later hydrothermal electrophoretic deposition process exhibit better antioxidation property. The as-prepared multi-coatings can effectively protect C/C composites from oxidation in air at 1 773 K for 37 h with a mass loss rate of 0.53%.

Occurrences of Excess ^(40)Ar in Hydrothermal Tourmaline: Interpretations from ^(40)Ar-^(39)Ar Dating Results by Stepwise Heating

The occurrences of excess ^40Ar within a hydrothermal tourmaline is discussed in term of the analysis data of syngenetic muscovite and tourmaline from the Lushui hydrothermal tin-tungsten deposit in western Yunnan, China, using the ^40Ar-^39Ar stepwise heating technique. About 80% excess ^40 Ar was released in the last step when the tourmaline was fused, corresponding to a release of only -3% ^39 Ar （K）, which indicates that most excess ^40 Ar was held in the mineral lattice rather than in the channels parallel to the Z-axis. This suggests that the excess ^40 Ar was incorporated during crystallization and not diffused into the tourmaline during the post-crystallization history.

Photoelectrochemical Properties of Highly Oriented ZnO Nanotube Array Films on ITO Substrates

Highly oriented ZnO nanotube array films on the conducting substrates have been synthesized by a simple hydrothermal method and characterized by scanning electron microscopy (SEM) and UV-Vis spectroscopy. The thin films consisting of laterally fragmentized ZnO nanotubes with controlled orientation have been tested as photoanode in Gr鋞zel-type solar cell. For a sandwich-type cell, with 0.5 mol/L LiI and 0.05 mol/L I2 in propylene carbonate electrolyte, the overall solar energy conversion efficiency reaches 2.3%.