Single-phase insulating 12CaO？7Al_2O_3（C12A7） powder was synthesized using an optimized hydrothermal method. Pure phase of C12A7 was got at a comparatively lower temperature（c.a. 300 ℃） than that has been previo...Single-phase insulating 12CaO？7Al_2O_3（C12A7） powder was synthesized using an optimized hydrothermal method. Pure phase of C12A7 was got at a comparatively lower temperature（c.a. 300 ℃） than that has been previously reported. The crystallite size of the synthesized C12A7 powder was 7±2 nm. The surface area values calculated for all the samples at a synthesis temperature range of 250-800 ℃ for 5 h were in the range of about 19-24 m^2/g, with pore sizes of 12-20 nm. This low-temperature-based synthetic strategy along with nano porous structures and a high surface area value can facilitate catalyst application.展开更多
Nanocrystalline TiO2 thin film electrodes have been prepared from mixed pastes of tetrabutyl titanate and nanocrystalline TiO2 particles by common pressure hydro- thermal method at low temperature. The tetrabutyl tita...Nanocrystalline TiO2 thin film electrodes have been prepared from mixed pastes of tetrabutyl titanate and nanocrystalline TiO2 particles by common pressure hydro- thermal method at low temperature. The tetrabutyl titanate was hydrolyzed and crystallized into anatase TiO2 to inter- connect nanocrystalline TiO2 particles and adhere them to conductive substrates, obtaining highly porous and me- chanically stable TiO2 nanocrystalline film. The conversion efficiencies of the dye-sensitized solar cells based on prepared electrodes on conductive glass substrates and flexible sub- strates were 4.8% and 1.9% under illumination of 100 mW/cm2, respectively.展开更多
MnO_(x)-CeO_(2) catalysts are developed by hydrolysis driving redox method using acetate precursor(3 Mn1 Ce-Ac) and nitrate precursor(3 Mn1 Ce-N) for the selective catalytic reduction(SCR) of NO_(x) by NH_(3).A counte...MnO_(x)-CeO_(2) catalysts are developed by hydrolysis driving redox method using acetate precursor(3 Mn1 Ce-Ac) and nitrate precursor(3 Mn1 Ce-N) for the selective catalytic reduction(SCR) of NO_(x) by NH_(3).A counterpart sample(Cop-3 Mn1 Ce) was prepared by the NH_(3)·H_(2) O co-precipitation method for comparison purpose.Combining the results of physicochemical properties characterization and performance test,we find that the 3 Mn1 Ce-Ac catalyst with some nanorod structures is highly active for the deNOx process.The SCR activity of the 3 Mn1 Ce-Ac catalyst is more admirable than the 3 Mn1 Ce-N and the Cop-3 Mn1 Ce catalysts due to plentiful Lewis acid sites,excellent low-temperature reducibility,and superior surface area resulted from O_(2) generation during the pre paration procedure.The 3 Mn1 Ce-Ac still exhibits the greatest performance for the deNO_(x )process when gaseous acetone is in the SCR feed gas.The NOx conversion and N2 selectivity over the 3 Mn1 Ce-Ac are both improved by gaseous acetone above150℃ due to the inhibition of SCR undesired side reactions(NSCR & C-O reactions) and "slow-SCR" process.展开更多
基金Funded by the National Natural Science Foundation of China(No.21377063)the Zhejiang Natural Science Foundation(No.LY15F040004)the Program for Ningbo Key Laboratory of Silicon and Organic Thin Film Optoelectronic Technologies
文摘Single-phase insulating 12CaO？7Al_2O_3（C12A7） powder was synthesized using an optimized hydrothermal method. Pure phase of C12A7 was got at a comparatively lower temperature（c.a. 300 ℃） than that has been previously reported. The crystallite size of the synthesized C12A7 powder was 7±2 nm. The surface area values calculated for all the samples at a synthesis temperature range of 250-800 ℃ for 5 h were in the range of about 19-24 m^2/g, with pore sizes of 12-20 nm. This low-temperature-based synthetic strategy along with nano porous structures and a high surface area value can facilitate catalyst application.
基金supported by the National Basic Research Development Program(973)(Grant No.G200028205)the High-Tech Research and Development(863)Program(Grant No.2002AA302403)the National Natural Science Foundation of China(Grant No.50221201).
文摘Nanocrystalline TiO2 thin film electrodes have been prepared from mixed pastes of tetrabutyl titanate and nanocrystalline TiO2 particles by common pressure hydro- thermal method at low temperature. The tetrabutyl titanate was hydrolyzed and crystallized into anatase TiO2 to inter- connect nanocrystalline TiO2 particles and adhere them to conductive substrates, obtaining highly porous and me- chanically stable TiO2 nanocrystalline film. The conversion efficiencies of the dye-sensitized solar cells based on prepared electrodes on conductive glass substrates and flexible sub- strates were 4.8% and 1.9% under illumination of 100 mW/cm2, respectively.
基金supported by the Key Laboratory of Water and Air Pollution Control of Guangdong province,China (No.2017A030314001)the National Key Research and Development Plan (No.2019YFC0214303)+1 种基金Central Public-Interest Scientific Institution Basal Research Fund (No.PM-zx703-202002-015)the National Natural Science Foundation of China (No.22076224)。
文摘MnO_(x)-CeO_(2) catalysts are developed by hydrolysis driving redox method using acetate precursor(3 Mn1 Ce-Ac) and nitrate precursor(3 Mn1 Ce-N) for the selective catalytic reduction(SCR) of NO_(x) by NH_(3).A counterpart sample(Cop-3 Mn1 Ce) was prepared by the NH_(3)·H_(2) O co-precipitation method for comparison purpose.Combining the results of physicochemical properties characterization and performance test,we find that the 3 Mn1 Ce-Ac catalyst with some nanorod structures is highly active for the deNOx process.The SCR activity of the 3 Mn1 Ce-Ac catalyst is more admirable than the 3 Mn1 Ce-N and the Cop-3 Mn1 Ce catalysts due to plentiful Lewis acid sites,excellent low-temperature reducibility,and superior surface area resulted from O_(2) generation during the pre paration procedure.The 3 Mn1 Ce-Ac still exhibits the greatest performance for the deNO_(x )process when gaseous acetone is in the SCR feed gas.The NOx conversion and N2 selectivity over the 3 Mn1 Ce-Ac are both improved by gaseous acetone above150℃ due to the inhibition of SCR undesired side reactions(NSCR & C-O reactions) and "slow-SCR" process.
