Ammonium dinitramide(ADN)is a promising oxidizer with high energy characteristic,which is a relatively new environmentally friendly oxidizer without halogens and carbon elements.However,ADN has high hygroscopicity whe...Ammonium dinitramide(ADN)is a promising oxidizer with high energy characteristic,which is a relatively new environmentally friendly oxidizer without halogens and carbon elements.However,ADN has high hygroscopicity when exposed to high humidity air,restricting its applications on the solid propellants.In this paper,a novel energetic cocrystal composed of ammonium dinitramide and 3,4-diaminofurazan(DAF)was proposed and successfully synthesized by antisolvent crystallization method,and the properties of the cocrystal were systematically investigated by analytical characterization and theoretical simulation calculations.The formation of the cocrystal was confirmed by powder X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,infrared spectroscopy and Raman spectroscopy,indicating that the synthesized product was a cocrystal.Through theoretical studies,the ADN/DAF cocrystal structure was predicted,and the powder X-ray diffraction,morphology,water sorption capacity of ADN/DAF cocrystal were calculated,which was consistent with experimental phenomena.The results showed that newly prepared cocrystal of ADN/DAF had lower hygroscopicity compared to pure ADN,and the water sorption capacity was reduced from 15.35%to 7.90%.This may be due to the formation of N-H…O medium-strength hydrogen bonds between the ammonium ion of ADN and the O atom of DAF in the cocrystal,which prevents the binding of water molecules in the air and ammonium ions and reduces the probability of ADN binding to water molecules,leading to the reduction of cocrystal hygroscopicity.The newly prepared energetic cocrystal can provide theoretical and technical guidance for the study of the anti-hygroscopicity of ADN and advance the practical application of ADN.展开更多
This study aims to develop highly hygroscopic bio-based co-polyamides(CPs)by melt co-polycondensation of polyamide(PA)56 salt and PA66 salt with varying molar fractions.The functional groups and the chemical structure...This study aims to develop highly hygroscopic bio-based co-polyamides(CPs)by melt co-polycondensation of polyamide(PA)56 salt and PA66 salt with varying molar fractions.The functional groups and the chemical structure of the prepared samples were determined by Fourier transform infrared(FTIR)spectroscopy and proton nuclear magnetic resonance(^(1)H-NMR)spectroscopy.The relative viscosity was determined with an Ubbelohde viscometer.The melting behavior and the thermal stability of CPs were investigated by differential scanning calorimetry(DSC)and thermogravimetric analysis(TGA).Furthermore,the water absorption behavior of CP hot-pressed film was studied.The results reveal that the melting point,the crystallization temperature and the crystallinity of CPs firstly decrease and then increase with the molar fraction of PA66 in CPs.The copolymerization of PA56 with PA66 leads to an obvious increase in water absorption.The CPs with PA66 molar fraction of 50%possess a high saturated water absorption rate of 17.6%,compared to 11.6%for pure PA56 and 7.8%for pure PA66.展开更多
The effect of heat treatment on the surface colour and hygro- scopic properties of pine wood were investigated in this study. Boards of Scots pine wood (Pinus sylvestris L.) were subjected to thermal treatment at 20...The effect of heat treatment on the surface colour and hygro- scopic properties of pine wood were investigated in this study. Boards of Scots pine wood (Pinus sylvestris L.) were subjected to thermal treatment at 200℃, for 4, 6, and 8 h. The change of equilibrium moisture content and density values of the specimens in order to facilitate the understand- ing of the treated material behavior. The colour parameters L* a* and b*, used to depict the total colour change (dE) of wood surface, were shown to change proportionally to the treatment intensity. Moreover, swelling in the tangential and radial directions and absorption of the specimens ap- peared to be enhanced in great extent by the thermal treatment process. The mean value of swelling percentage in the tangential direction de- creased 10.26%, 17.22%, and 19.60% for specimens treated for 4, 6, and 8 h, respectively, referring to the final measurement after 72 h of immer- sion. In radial direction, mean value of swelling percentage decreased 19.56%, 32.75%, and 34.65% for treated for 4, 6 and 8 h, respectively, after 72 h immersion, which attests the decrease in swelling and im- provement in the hygroscopic behavior of Scots pine wood.展开更多
Assessment of the radiative forcing of aerosols in models still lacks sufficient input data for aerosol hygroscopicity. The light scattering enhancement factor [ f(RH, λ)] is a crucial parameter for describing aeroso...Assessment of the radiative forcing of aerosols in models still lacks sufficient input data for aerosol hygroscopicity. The light scattering enhancement factor [ f(RH, λ)] is a crucial parameter for describing aerosol hygroscopic growth properties.In this paper, we provide a survey of f(RH, λ) studies in China for the past seven years, including instrument developments of humidified nephelometers, ambient f(RH, λ) measurements in China, f(RH, λ) parameterization schemes, and f(RH, λ)applications in aerosol measurements. Comparisons of different f(RH, λ) parameterizations are carried out to check their performance in China using field measurement datasets. We also summary the parameterization schemes for predicting f(RH, λ)with aerosol chemical compositions. The recently developed methods to observe other aerosol properties using f(RH, λ)measurements, such as calculating the aerosol hygroscopicity parameter, cloud condensation nuclei number concentration,aerosol liquid water content, and aerosol asymmetry factor, are introduced. Suggestions for further research on f(RH, λ) in China are given.展开更多
In situ diffusion reflectance infrared Fourier transform spectroscopy was used to study the water adsorption on mineral oxides (SiO2, a-Al2O3, MgO, Fe2O3, TiO2). The results showed that all the water adsorption isot...In situ diffusion reflectance infrared Fourier transform spectroscopy was used to study the water adsorption on mineral oxides (SiO2, a-Al2O3, MgO, Fe2O3, TiO2). The results showed that all the water adsorption isotherms were well fitted with the Brunauer-Emmett-Teller (BET)-Ⅲ type equation, with the calculated monolayers occurring at 24%-30% relative humidity. It showed that about 1-5 layers of water adsorbed on oxides surfaces in ambient relative humidity (20%-90%). The measured deliquescence relative humidity of NaCl was (74 ± 1)%, which demonstrated that DRIFTS is a useful method for the study the hygroscopic behavior of mineral dust. In addition, the limits of DRIPTS were also discussed.展开更多
(ZrMg)xY2-2xMo3O12(x=0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,and 1)ceramics have been synthesized to obtain less hygroscopicity and negative thermal expansion.With increasing the substitution of(ZrMg)^6+(ion radius 7....(ZrMg)xY2-2xMo3O12(x=0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,and 1)ceramics have been synthesized to obtain less hygroscopicity and negative thermal expansion.With increasing the substitution of(ZrMg)^6+(ion radius 7.2×10^-11 m)for Y3+(ion radius 9×10^-11 m),the crystal water are reduced obviously.The linear thermal expansion coefficient is improved with increasing the content of(ZrMg)^6+.The material shows near zero thermal expansion(-0.12×10^-6 K^-1,430-870 K)with x=0.7.Meanwhile,ZrMgMo3O12 shows low non-hygroscopicity and negative thermal expansion,but low softening temperature.After substituting amount of Y^3+for(ZrMg)^6+in ZrMgMo3O12(x=0.8),the softening temperature increases remarkably(750 K to 830 K)and it presents near zero thermal expansion.展开更多
The hygroscopicity of atmospheric aerosols significantly influences their size distribution, cloud condensation nuclei ability, atmospheric residence time, and climate forcing. In order to investigate the hygroscopic ...The hygroscopicity of atmospheric aerosols significantly influences their size distribution, cloud condensation nuclei ability, atmospheric residence time, and climate forcing. In order to investigate the hygroscopic behavior of aerosol particles and serious haze in China, a Hygroscopic Tandem Differential Mobility Analyzers (HTDMA) system was designed and constructed at Fudan University. It can function as a scanning mobility particle sizing system to measure particle size distribution in the range of 20-1000 nm in diameter, as well as a hygroscopicity analyzer for aerosol particles with diameters between 20-400 nm in the range of 20%-90% RH (relative humidity). It can also measure the effect of uptake of inorganic acids or semiVOCs on the hygroscopic behavior of aerosols, such as typical inorganic salts in atmospheric dust or their mixtures. The performance tests show that the system measured particle size of the standard polystyrene latex spheres (PSLs) is 197 nm, which is in excellent agreement with the certified diameter D=199±6 nm, as well as a standard deviation of the repeated runs SD=8.9×10^-4. In addition, the measured hygroscopic growth factors of the model compounds, (NH4)2SO4 and NaNO3, agree with the Kohler theoretical curves. The results indicate that the HTDMA system is an excellent and powerful tool for studying the hygroscopic behavior of submicron aerosols and meets the demand required for laboratory research and fieldwork on atmospheric aerosols in China.展开更多
How to completely remove the water from ionic liquids(ILs)is difficult for researchers because of the hygroscopicity of ILs.In order to study the hygroscopicity of ILs,two kinds of ILs,1-Butyl-3-methylimidazolium hexa...How to completely remove the water from ionic liquids(ILs)is difficult for researchers because of the hygroscopicity of ILs.In order to study the hygroscopicity of ILs,two kinds of ILs,1-Butyl-3-methylimidazolium hexafluorophosphate([Bmim][PF6])and 1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)([Bmim][NTf_(2)])were investigated by molecular dynamics simulations.Although[Bmim][PF6]and[Bmim][NTf_(2)]are hydrophobic,both of the ILs could absorb water molecules from the vapor.In this work,the process of absorbing water from the vapor phase was studied,and the water molecules could disperse into the IL.Aggregation was observed with increasing the water concentration.Although the absorbed water increases obviously,the amount of free water and small cluster in the ILs does not change significantly and always stays at a certain level.The amount of free water and small cluster in[Bmim][PF6]is more than that in[Bmim][NTf_(2)],which is consistent with their hydrophobicity.In addition,the liquid-vacuum and liquid–liquid interfaces of the ILs were simulated and analyzed in detail.The number density distribution and angle distribution indicated that[Bmim]+cations arrangement regularly at the IL-vacuum interface.The butyl chain point to the vacuum,while the imidazlium ring is close to the IL phase region and perpendicular to the interface.While at the IL-water interface,the cations and anions are disordered.展开更多
Measurements of aerosol physical, chemical and optical parameters were carried out in Guangzhou, China from 1 July to 31 July 2006 during the Pearl River Delta Campaign. The dry aerosol scattering coefficient was meas...Measurements of aerosol physical, chemical and optical parameters were carried out in Guangzhou, China from 1 July to 31 July 2006 during the Pearl River Delta Campaign. The dry aerosol scattering coefficient was measured using an integrating nephelometer and the aerosol scattering coefficient for wet conditions was determined by subtracting the sum of the aerosol absorption coefficient, gas scattering coefficient and gas absorption coefficient from the atmospheric extinction coefficient. Following this, the aerosol hygroscopic growth factor, f(RH), was calculated as the ratio of wet and dry aerosol scattering coefficients. Measurements of size-resolved chemical composition, relative humidity (RH), and published functional relationships between particle chemical composition and water uptake were likewise used to find the aerosol scattering coe?cients in wet and dry conditions using Mie theory for internally- or externally-mixed particle species [(NH_4)_2SO_4, NH_4NO_3, NaCl, POM, EC and residue]. Closure was obtained by comparing the measured f(RH) values from the nephelometer and other in situ optical instruments with those computed from chemical composition and thermodynamics. Results show that the model can represent the observed f(RH) and is appropriate for use as a component in other higher-order models.展开更多
The volume expansion of SU-8 resist brings serious dimensional errors to electroformed structures.Two approaches have been proposed to reduce resist distortions during electroforming:electroforming at room temperature...The volume expansion of SU-8 resist brings serious dimensional errors to electroformed structures.Two approaches have been proposed to reduce resist distortions during electroforming:electroforming at room temperature and adding auxiliary features for mask patterns.However,the former method induces higher internal stresses in the electroformed metal layers.And the latter method makes it difficult to predict the expansion behaviors of the resists.In the paper,the thermal expansion of the SU-8 mould is calculated by ANSYS firstly,and the lower thermal expansion value indicates that hygroscopic swelling plays a leading role in SU-8 mould distortions.An original technique is presented to reduce SU-8 hygroscopic swelling by ultrasonic treatment.The dimensional errors of the electroformed structure fabricated on the ultrasonic treatment mould are 50% lower than the one without ultrasonic treatment.Simulation of hygroscopic swelling is conducted by finite element analysis,and the results indicate that the hygroscopic strain ε of SU-8 after electroforming is declined from 6.8% to 3.1% because of ultrasonic.The measurements show that ultrasonic treatment increased the water contact angle of cured SU-8 from 70.8?to 74.9?.Based on these results,the mechanism of ultrasonic effect on hygroscopic swelling is proposed from the view of ultrasonic vibration decreasing the number of hydroxyl groups in SU-8.The research presents a novel method to improve the precisions of electroformed structures.It has no influence on the internal stresses of final structures and does not increase the complexities of mask layouts.展开更多
A plasticizer triethylene glycol maleate(TEG-MA) was synthesized. The dominated monoester of moderate hydrophobicity with apparent oil-water partition coefficient of 0.042 in the product was confirmed by acid value ...A plasticizer triethylene glycol maleate(TEG-MA) was synthesized. The dominated monoester of moderate hydrophobicity with apparent oil-water partition coefficient of 0.042 in the product was confirmed by acid value determination, HPLC and FTIR. Its plasticizing effect on oxidized starch was manifested by crystallization, aging behaviour, moisture absorption, and mechanical performance. X-ray diffraction data showed that the relative crystallinity of the plasticized starch decreased. Both the crystal and the crystallinity of starch films were rarely changed in aging. Moisture absorption relied on the ester content and relative humidity. The elongation at break increased significantly with plasticizer content more than 10% in the matrix.展开更多
In this paper, the authors extracted and investigated the effect of relative humidity (RH) on some microphysical and optical properties of continental polluted aerosols from OPAC (Optical Properties of Aerosols and Cl...In this paper, the authors extracted and investigated the effect of relative humidity (RH) on some microphysical and optical properties of continental polluted aerosols from OPAC (Optical Properties of Aerosols and Clouds) at the spectral range of 0.25 μm to 2.5 μm and eight relative humidities (0%, 50%, 70%, 80%, 90%, 95%, 98%, and 99%). The microphysical properties extracted were radii, volume, number and mass mix ratios as functions of RH while the optical properties were optical depth, extinction, scattering and absorption coefficients single scattering albedo, refractive indices and asymmetric parameters also at eight RHs. Using the microphysical properties, effective hygroscopic growth factors and effective radii of the mixtures were determined while using optical properties we determined the enhancement parameters, effective refractive indices and angstrom coefficients. Using the effective hygroscopic growth, we determined the dependence of the effective hygroscopicity parameter as a function of RH, while using enhancement parameters;we determined the effect of humidification factor on RH and wavelengths. The effective hygroscopic growth and enhancement parameters were then parameterized using some models to determine the effective hygroscopicity parameter, bulk hygroscopicity and humidification factors. We observed that the data fitted the models very well. The effective radii decrease with the increase in RH while the effective hygroscopic growth increases with the increase in RH, and this is in line with the increase in angstrom parameters, and this shows increase in mode size with the increase in RH. The angstrom coefficients show that the mixture has a bimodal type of distribution with the dominance of fine mode particles.展开更多
Ammonium nitrate(AN)is promising oxidizer in green propellants.In this work,the physical coating method was improved to modify the surface of ammonium nitrate particles with different surfactant materials to reduce hy...Ammonium nitrate(AN)is promising oxidizer in green propellants.In this work,the physical coating method was improved to modify the surface of ammonium nitrate particles with different surfactant materials to reduce hygroscopicity.Cetylalcohoi,stearic acid,stearyl alcohol,palmic acid,lauric acid,stearsmide,tetradecylamine,dodecylamine,and tetradecanol were used as coating surfactant agents.The hygroscopicity was tested for ammonium nitrate with and without coating.Fourier transform infrared(FTIR)and scanning electron microscopy(SEM)were used to characterize the surface of coated and uncoated ammonium nitrate.The mass ratio of coating layer and decline of absorption rate of ammonium nitrate coated by cetylalcohol were 1.00%,and 28.40%,respectively.The results indicate that coating with cetylalcohol surfactant have advantages over the other surfactants in term of low mass ratio of coating layer,and high decline of moisture absorption rate.Thus,cetylalcohol would be a promising coating surfactant material for ammonium nitrate.The idea and approach presented in this study have potential to made hydrophobic layer on the surface of particles to reduce hygroscopicity of AN,and also help the researcher to improving anti-hygroscopicity of ammonium salts.展开更多
The reduction of the hygroscopicity of wood fibers was investigated through a Thermal Treatment(TT)on wood chips performed before the defibering process.The TT and defibering tests were both carried out on a continuou...The reduction of the hygroscopicity of wood fibers was investigated through a Thermal Treatment(TT)on wood chips performed before the defibering process.The TT and defibering tests were both carried out on a continuous pilot at semi-industrial scale.The thermal treatment study of wood chips,equivalent to a low temperature pyrolysis,was achieved for four conditions(280°C–320°C)for a duration of 10 min.Mass quantification of solids,condensables and gases(FTIR)at the outcome of the thermal treatment allowed to achieve the mass balances for each condition.The increase of the reactor temperature from 280°C to 320°C leads to a lower solid yield(94%–82%)while gaseous(1%–3.8%)and condensable(3%–11%)products increase significantly.Thermally treated wood samples were afterwards successfully defibered in different conditions to produce suitable fibers for insulation panel production.The aim of the study is also to evaluate the effects of the TT on the lowering of energy consumption necessary for the defibering process while producing good quality fibers.Energy consumption during defibering process shows a significant decrease with the increase the TT severity.Fiber morphology is affected by TT and the morphological quality of the fibers decreases as TT severity increases.The mass percentage of dust was also quantified as a quality marker of produced fibers.Measurements of equilibrium moisture(at 20°C and 65%RH)of the different materials(wood chips before and after TT,produced fibers)show a significant effect of the TT on wood chips hygroscopicity(8.2%for untreated wood to 4.1%for TT at 320°C).However,the effect of the TT on the hygroscopicity reduction of thermally treated wood fibers is drastically less significant due to breaking of the wood structure during defibering process.展开更多
In this paper, the factors to influence the dynamic heat - moisture comfort of summer clothing fabrics have been studied. It is pointed out that, when the wind speed outside is high, or the air permeability is very go...In this paper, the factors to influence the dynamic heat - moisture comfort of summer clothing fabrics have been studied. It is pointed out that, when the wind speed outside is high, or the air permeability is very good, the sweat of human body will evaporate mainly through turbulent diffusion. Because of the rapid sweat evaporation, human body will feel cold, and then, the difference in temperature and humidity of the micro - climatic section will be very slight. On the contrary, when the wind speed outside is slow or the air permeability is unsatisfactory, the sweat of human body will evaporate mainly through molecular diffusion, and in this case, the humidity of the micro - climatic section will be depended on the hygroscopicity of the fabric, that’ s to say, the better the hygroscopicity, the lower the humidity. It is difficult for pure wool fabric to loss heat because of its giving out much heat during the course of moisture - absorption in the initial stages of sweating. For pure polyester fabric,展开更多
Plant-based concretes are produced from plant aggregates and a binder.Plant fibers are mainly composed of saccharides(sugars)and these sugars can decrease the concentration of Ca2+ions in the cement pore solution and ...Plant-based concretes are produced from plant aggregates and a binder.Plant fibers are mainly composed of saccharides(sugars)and these sugars can decrease the concentration of Ca2+ions in the cement pore solution and delay the formation of hydration products.To improve the interfacial bond between fibers and matrix a chemical treatment is widely used.This study investigates the effect of sodium hydroxide treatment on physical and hygroscopic properties of Typha aggregates.In particular,a 5%sodium hydroxide solution is used to treat these aggregates and their bulk and absolute densities,porosity,water content and water absorption are evaluated accordingly.Results indicate that bulk and absolute densities increase after treatment from 56.44 kg/m^(3) to 122.57 kg/m^(3) and 541.93 kg/m^(3) to 555.17 kg/m^(3),respectively.NaOH treatment reduces porosity of Typha from 89.58%to 77.92%and decreases water content from 1.4%to 1%.The treatment with sodium hydroxide reduces substantially the water absorption of the aggregates.展开更多
Magnesite-bonded wood wool panel(MWWP)is an inorganic-bonded panel product in which wood excelsior is bonded with magnesite.Lowering the hygroscopicity is one of the key measures to improve the quality of the panel.In...Magnesite-bonded wood wool panel(MWWP)is an inorganic-bonded panel product in which wood excelsior is bonded with magnesite.Lowering the hygroscopicity is one of the key measures to improve the quality of the panel.In this study,moisture absorption mechanism of MWWP and measures generally applied to lower its hygroscopicity were reviewed.Three methods were then experimented to improve the dimensional stability of the panel,including adjusting the molar ratio of raw materials,adding additives and optimizing the conditioning process.The results showed that satisfying dimensional stability could be achieved when the molar ratio of MgO to MgCl_(2) was 5:1,the No.2 composite additive(aluminum powder+NH_(4)H_(2)PO_(4)+ferric alum)was adopted and a constant temperature and humidity treatment was applied in the first stage of conditioning.展开更多
The objective of this study was to determine adsorption isotherms and hygroscopic behavior of lyophilized powder from grugru palm. The powders of grugru palm were obtained by lyophilization process without maltodextri...The objective of this study was to determine adsorption isotherms and hygroscopic behavior of lyophilized powder from grugru palm. The powders of grugru palm were obtained by lyophilization process without maltodextrin (T1) and with 8% matodextrin (T2). The experimental data were obtained through the static gravimetric method at temperatures (25℃, 30℃, 35℃ and 40℃), with different saturated solutions of salts. The models of GAB, BET, Henderson and Oswin were fitted to experimental data. The values obtained for hygroscopicity were 7.68% and 6.86% and the degrees of caking were 0.33% and 0.09% for T1 and T2, respectively. Mathematical models of adsorption isotherms for grugru palm powders can be classified as Type III. The GAB and Oswin models represented better the behavior of isotherms for T1 and T2. Grugru palm powder showed an increase in the humidity of the monolayer Xm along with increasing temperature. The grugru palm powder demonstrated to be a non-hygroscopic product, non-caking features.展开更多
Due to the high hygroscopicity of the plastic packaging material, the device is inevitably subjected to high temperature or high humidity environment during the production and testing process. After the moisture is ex...Due to the high hygroscopicity of the plastic packaging material, the device is inevitably subjected to high temperature or high humidity environment during the production and testing process. After the moisture is expanded, the internal stress is too large, and the delamination and gold wire breakage are formed. At the same time, due to the difference in the coefficient of thermal expansion (CTE) between the plastic packaging material and the materials such as Si and Cu, it is easy to form delamination under a relatively large shear force. The water vapor remaining in the plastic packaging material is the root cause of delamination, and the reflow process and temperature are the predisposing factors leading to delamination. However, it has been found through experiments that different plastic packaging materials have different hygroscopicity and cohesiveness, and they have obvious improvement effects on delamination.展开更多
In this paper, the authors investigated some microphysical and optical properties of continental clean aerosols from OPAC to determine the effect of hygroscopic growth at the spectral range of 0.25 μm to 2.5 μm and ...In this paper, the authors investigated some microphysical and optical properties of continental clean aerosols from OPAC to determine the effect of hygroscopic growth at the spectral range of 0.25 μm to 2.5 μm and eight relative humidities (RHs) (0%, 50%, 70%, 80%, 90%, 95%, 98% and 99%). The microphysical properties extracted were radii, volume mix ratio, number mix ratio and mass mix ratio as a function of RH while the optical properties are scattering and absorption coefficients and asymmetric parameters. Using the microphysical properties, growth factors of the mixtures were determined while using optical properties the enhancement parameters were determined and then parameterized using some models. We observed that the data fitted the models very well. The angstrom coefficients show that the mixture has bimodal type of distribution with the dominance of fine mode particles.展开更多
基金supported by the National Natural Science Foundation of China(22125802)Beijing Natural Science Foundation(2222017)National key research and development program(2021YFC2101202)。
文摘Ammonium dinitramide(ADN)is a promising oxidizer with high energy characteristic,which is a relatively new environmentally friendly oxidizer without halogens and carbon elements.However,ADN has high hygroscopicity when exposed to high humidity air,restricting its applications on the solid propellants.In this paper,a novel energetic cocrystal composed of ammonium dinitramide and 3,4-diaminofurazan(DAF)was proposed and successfully synthesized by antisolvent crystallization method,and the properties of the cocrystal were systematically investigated by analytical characterization and theoretical simulation calculations.The formation of the cocrystal was confirmed by powder X-ray diffraction,differential scanning calorimetry,scanning electron microscopy,infrared spectroscopy and Raman spectroscopy,indicating that the synthesized product was a cocrystal.Through theoretical studies,the ADN/DAF cocrystal structure was predicted,and the powder X-ray diffraction,morphology,water sorption capacity of ADN/DAF cocrystal were calculated,which was consistent with experimental phenomena.The results showed that newly prepared cocrystal of ADN/DAF had lower hygroscopicity compared to pure ADN,and the water sorption capacity was reduced from 15.35%to 7.90%.This may be due to the formation of N-H…O medium-strength hydrogen bonds between the ammonium ion of ADN and the O atom of DAF in the cocrystal,which prevents the binding of water molecules in the air and ammonium ions and reduces the probability of ADN binding to water molecules,leading to the reduction of cocrystal hygroscopicity.The newly prepared energetic cocrystal can provide theoretical and technical guidance for the study of the anti-hygroscopicity of ADN and advance the practical application of ADN.
基金National Key Research and Development Program of China(No.2017YFB0309400).
文摘This study aims to develop highly hygroscopic bio-based co-polyamides(CPs)by melt co-polycondensation of polyamide(PA)56 salt and PA66 salt with varying molar fractions.The functional groups and the chemical structure of the prepared samples were determined by Fourier transform infrared(FTIR)spectroscopy and proton nuclear magnetic resonance(^(1)H-NMR)spectroscopy.The relative viscosity was determined with an Ubbelohde viscometer.The melting behavior and the thermal stability of CPs were investigated by differential scanning calorimetry(DSC)and thermogravimetric analysis(TGA).Furthermore,the water absorption behavior of CP hot-pressed film was studied.The results reveal that the melting point,the crystallization temperature and the crystallinity of CPs firstly decrease and then increase with the molar fraction of PA66 in CPs.The copolymerization of PA56 with PA66 leads to an obvious increase in water absorption.The CPs with PA66 molar fraction of 50%possess a high saturated water absorption rate of 17.6%,compared to 11.6%for pure PA56 and 7.8%for pure PA66.
文摘The effect of heat treatment on the surface colour and hygro- scopic properties of pine wood were investigated in this study. Boards of Scots pine wood (Pinus sylvestris L.) were subjected to thermal treatment at 200℃, for 4, 6, and 8 h. The change of equilibrium moisture content and density values of the specimens in order to facilitate the understand- ing of the treated material behavior. The colour parameters L* a* and b*, used to depict the total colour change (dE) of wood surface, were shown to change proportionally to the treatment intensity. Moreover, swelling in the tangential and radial directions and absorption of the specimens ap- peared to be enhanced in great extent by the thermal treatment process. The mean value of swelling percentage in the tangential direction de- creased 10.26%, 17.22%, and 19.60% for specimens treated for 4, 6, and 8 h, respectively, referring to the final measurement after 72 h of immer- sion. In radial direction, mean value of swelling percentage decreased 19.56%, 32.75%, and 34.65% for treated for 4, 6 and 8 h, respectively, after 72 h immersion, which attests the decrease in swelling and im- provement in the hygroscopic behavior of Scots pine wood.
基金supported by the National Natural Science Foundation of China(Grant No.41590872)
文摘Assessment of the radiative forcing of aerosols in models still lacks sufficient input data for aerosol hygroscopicity. The light scattering enhancement factor [ f(RH, λ)] is a crucial parameter for describing aerosol hygroscopic growth properties.In this paper, we provide a survey of f(RH, λ) studies in China for the past seven years, including instrument developments of humidified nephelometers, ambient f(RH, λ) measurements in China, f(RH, λ) parameterization schemes, and f(RH, λ)applications in aerosol measurements. Comparisons of different f(RH, λ) parameterizations are carried out to check their performance in China using field measurement datasets. We also summary the parameterization schemes for predicting f(RH, λ)with aerosol chemical compositions. The recently developed methods to observe other aerosol properties using f(RH, λ)measurements, such as calculating the aerosol hygroscopicity parameter, cloud condensation nuclei number concentration,aerosol liquid water content, and aerosol asymmetry factor, are introduced. Suggestions for further research on f(RH, λ) in China are given.
基金supported by the National Natural Science Foundation of China (No.20877084,20937004)the Chinese Academy of Sciences (No.KZCX2-YW-Q02-03)
文摘In situ diffusion reflectance infrared Fourier transform spectroscopy was used to study the water adsorption on mineral oxides (SiO2, a-Al2O3, MgO, Fe2O3, TiO2). The results showed that all the water adsorption isotherms were well fitted with the Brunauer-Emmett-Teller (BET)-Ⅲ type equation, with the calculated monolayers occurring at 24%-30% relative humidity. It showed that about 1-5 layers of water adsorbed on oxides surfaces in ambient relative humidity (20%-90%). The measured deliquescence relative humidity of NaCl was (74 ± 1)%, which demonstrated that DRIFTS is a useful method for the study the hygroscopic behavior of mineral dust. In addition, the limits of DRIPTS were also discussed.
基金Funded by National Natural Science Foundation of China(Nos.61704156,11847099 and 10974183).
文摘(ZrMg)xY2-2xMo3O12(x=0.0,0.1,0.2,0.3,0.4,0.5,0.6,0.7,0.8,0.9,and 1)ceramics have been synthesized to obtain less hygroscopicity and negative thermal expansion.With increasing the substitution of(ZrMg)^6+(ion radius 7.2×10^-11 m)for Y3+(ion radius 9×10^-11 m),the crystal water are reduced obviously.The linear thermal expansion coefficient is improved with increasing the content of(ZrMg)^6+.The material shows near zero thermal expansion(-0.12×10^-6 K^-1,430-870 K)with x=0.7.Meanwhile,ZrMgMo3O12 shows low non-hygroscopicity and negative thermal expansion,but low softening temperature.After substituting amount of Y^3+for(ZrMg)^6+in ZrMgMo3O12(x=0.8),the softening temperature increases remarkably(750 K to 830 K)and it presents near zero thermal expansion.
基金support from the National Natural Science Foundation of China(Grant Nos.40533017,40775080,40728006)the key project from the Ministry of Education of China(Grant No.108050)the Research Fund for the Doctoral Program of Higher Education(Grant No.20070246024)
文摘The hygroscopicity of atmospheric aerosols significantly influences their size distribution, cloud condensation nuclei ability, atmospheric residence time, and climate forcing. In order to investigate the hygroscopic behavior of aerosol particles and serious haze in China, a Hygroscopic Tandem Differential Mobility Analyzers (HTDMA) system was designed and constructed at Fudan University. It can function as a scanning mobility particle sizing system to measure particle size distribution in the range of 20-1000 nm in diameter, as well as a hygroscopicity analyzer for aerosol particles with diameters between 20-400 nm in the range of 20%-90% RH (relative humidity). It can also measure the effect of uptake of inorganic acids or semiVOCs on the hygroscopic behavior of aerosols, such as typical inorganic salts in atmospheric dust or their mixtures. The performance tests show that the system measured particle size of the standard polystyrene latex spheres (PSLs) is 197 nm, which is in excellent agreement with the certified diameter D=199±6 nm, as well as a standard deviation of the repeated runs SD=8.9×10^-4. In addition, the measured hygroscopic growth factors of the model compounds, (NH4)2SO4 and NaNO3, agree with the Kohler theoretical curves. The results indicate that the HTDMA system is an excellent and powerful tool for studying the hygroscopic behavior of submicron aerosols and meets the demand required for laboratory research and fieldwork on atmospheric aerosols in China.
基金financial support from the National Science Fund for Excellent Young Scholars(21722610)Taishan Scholars Program of Shandong Province(tsqn201909091)。
文摘How to completely remove the water from ionic liquids(ILs)is difficult for researchers because of the hygroscopicity of ILs.In order to study the hygroscopicity of ILs,two kinds of ILs,1-Butyl-3-methylimidazolium hexafluorophosphate([Bmim][PF6])and 1-Butyl-3-methylimidazolium Bis(trifluoromethanesulfonyl)([Bmim][NTf_(2)])were investigated by molecular dynamics simulations.Although[Bmim][PF6]and[Bmim][NTf_(2)]are hydrophobic,both of the ILs could absorb water molecules from the vapor.In this work,the process of absorbing water from the vapor phase was studied,and the water molecules could disperse into the IL.Aggregation was observed with increasing the water concentration.Although the absorbed water increases obviously,the amount of free water and small cluster in the ILs does not change significantly and always stays at a certain level.The amount of free water and small cluster in[Bmim][PF6]is more than that in[Bmim][NTf_(2)],which is consistent with their hydrophobicity.In addition,the liquid-vacuum and liquid–liquid interfaces of the ILs were simulated and analyzed in detail.The number density distribution and angle distribution indicated that[Bmim]+cations arrangement regularly at the IL-vacuum interface.The butyl chain point to the vacuum,while the imidazlium ring is close to the IL phase region and perpendicular to the interface.While at the IL-water interface,the cations and anions are disordered.
基金supported by the Ministry of Science and Technology of China (GrantNos. 2006AA06A306 and 2005CB422207) the National Natural Science Foundation of China (Grant Nos.40675082 and 40905055)
文摘Measurements of aerosol physical, chemical and optical parameters were carried out in Guangzhou, China from 1 July to 31 July 2006 during the Pearl River Delta Campaign. The dry aerosol scattering coefficient was measured using an integrating nephelometer and the aerosol scattering coefficient for wet conditions was determined by subtracting the sum of the aerosol absorption coefficient, gas scattering coefficient and gas absorption coefficient from the atmospheric extinction coefficient. Following this, the aerosol hygroscopic growth factor, f(RH), was calculated as the ratio of wet and dry aerosol scattering coefficients. Measurements of size-resolved chemical composition, relative humidity (RH), and published functional relationships between particle chemical composition and water uptake were likewise used to find the aerosol scattering coe?cients in wet and dry conditions using Mie theory for internally- or externally-mixed particle species [(NH_4)_2SO_4, NH_4NO_3, NaCl, POM, EC and residue]. Closure was obtained by comparing the measured f(RH) values from the nephelometer and other in situ optical instruments with those computed from chemical composition and thermodynamics. Results show that the model can represent the observed f(RH) and is appropriate for use as a component in other higher-order models.
基金supported by the National Natural Science Foundation of China (No:50675025 and 51075057)
文摘The volume expansion of SU-8 resist brings serious dimensional errors to electroformed structures.Two approaches have been proposed to reduce resist distortions during electroforming:electroforming at room temperature and adding auxiliary features for mask patterns.However,the former method induces higher internal stresses in the electroformed metal layers.And the latter method makes it difficult to predict the expansion behaviors of the resists.In the paper,the thermal expansion of the SU-8 mould is calculated by ANSYS firstly,and the lower thermal expansion value indicates that hygroscopic swelling plays a leading role in SU-8 mould distortions.An original technique is presented to reduce SU-8 hygroscopic swelling by ultrasonic treatment.The dimensional errors of the electroformed structure fabricated on the ultrasonic treatment mould are 50% lower than the one without ultrasonic treatment.Simulation of hygroscopic swelling is conducted by finite element analysis,and the results indicate that the hygroscopic strain ε of SU-8 after electroforming is declined from 6.8% to 3.1% because of ultrasonic.The measurements show that ultrasonic treatment increased the water contact angle of cured SU-8 from 70.8?to 74.9?.Based on these results,the mechanism of ultrasonic effect on hygroscopic swelling is proposed from the view of ultrasonic vibration decreasing the number of hydroxyl groups in SU-8.The research presents a novel method to improve the precisions of electroformed structures.It has no influence on the internal stresses of final structures and does not increase the complexities of mask layouts.
基金Funded by Science and Technology Support Project of Sichuan Province(Nos.2014GZ0136 and 2015GZ0176)National Natural Science Foundation of China(No.51603134)
文摘A plasticizer triethylene glycol maleate(TEG-MA) was synthesized. The dominated monoester of moderate hydrophobicity with apparent oil-water partition coefficient of 0.042 in the product was confirmed by acid value determination, HPLC and FTIR. Its plasticizing effect on oxidized starch was manifested by crystallization, aging behaviour, moisture absorption, and mechanical performance. X-ray diffraction data showed that the relative crystallinity of the plasticized starch decreased. Both the crystal and the crystallinity of starch films were rarely changed in aging. Moisture absorption relied on the ester content and relative humidity. The elongation at break increased significantly with plasticizer content more than 10% in the matrix.
文摘In this paper, the authors extracted and investigated the effect of relative humidity (RH) on some microphysical and optical properties of continental polluted aerosols from OPAC (Optical Properties of Aerosols and Clouds) at the spectral range of 0.25 μm to 2.5 μm and eight relative humidities (0%, 50%, 70%, 80%, 90%, 95%, 98%, and 99%). The microphysical properties extracted were radii, volume, number and mass mix ratios as functions of RH while the optical properties were optical depth, extinction, scattering and absorption coefficients single scattering albedo, refractive indices and asymmetric parameters also at eight RHs. Using the microphysical properties, effective hygroscopic growth factors and effective radii of the mixtures were determined while using optical properties we determined the enhancement parameters, effective refractive indices and angstrom coefficients. Using the effective hygroscopic growth, we determined the dependence of the effective hygroscopicity parameter as a function of RH, while using enhancement parameters;we determined the effect of humidification factor on RH and wavelengths. The effective hygroscopic growth and enhancement parameters were then parameterized using some models to determine the effective hygroscopicity parameter, bulk hygroscopicity and humidification factors. We observed that the data fitted the models very well. The effective radii decrease with the increase in RH while the effective hygroscopic growth increases with the increase in RH, and this is in line with the increase in angstrom parameters, and this shows increase in mode size with the increase in RH. The angstrom coefficients show that the mixture has a bimodal type of distribution with the dominance of fine mode particles.
文摘Ammonium nitrate(AN)is promising oxidizer in green propellants.In this work,the physical coating method was improved to modify the surface of ammonium nitrate particles with different surfactant materials to reduce hygroscopicity.Cetylalcohoi,stearic acid,stearyl alcohol,palmic acid,lauric acid,stearsmide,tetradecylamine,dodecylamine,and tetradecanol were used as coating surfactant agents.The hygroscopicity was tested for ammonium nitrate with and without coating.Fourier transform infrared(FTIR)and scanning electron microscopy(SEM)were used to characterize the surface of coated and uncoated ammonium nitrate.The mass ratio of coating layer and decline of absorption rate of ammonium nitrate coated by cetylalcohol were 1.00%,and 28.40%,respectively.The results indicate that coating with cetylalcohol surfactant have advantages over the other surfactants in term of low mass ratio of coating layer,and high decline of moisture absorption rate.Thus,cetylalcohol would be a promising coating surfactant material for ammonium nitrate.The idea and approach presented in this study have potential to made hydrophobic layer on the surface of particles to reduce hygroscopicity of AN,and also help the researcher to improving anti-hygroscopicity of ammonium salts.
基金This study was realized thanks to the financial support of the French Region“GrandEst”and the financial and technical support of LERMAB,mainly Stéphane AUBERT for his technical support to build the thermal treatment reactor and the software for regulation and data loggins.LERMAB is supported by a grant overseen by the French National Research Agency(ANR)as part of the“Investissements d’Avenir”Program(ANR-11-LABX-0002-01.Lab of Excellence ARBRE)and is part of ICEEL。
文摘The reduction of the hygroscopicity of wood fibers was investigated through a Thermal Treatment(TT)on wood chips performed before the defibering process.The TT and defibering tests were both carried out on a continuous pilot at semi-industrial scale.The thermal treatment study of wood chips,equivalent to a low temperature pyrolysis,was achieved for four conditions(280°C–320°C)for a duration of 10 min.Mass quantification of solids,condensables and gases(FTIR)at the outcome of the thermal treatment allowed to achieve the mass balances for each condition.The increase of the reactor temperature from 280°C to 320°C leads to a lower solid yield(94%–82%)while gaseous(1%–3.8%)and condensable(3%–11%)products increase significantly.Thermally treated wood samples were afterwards successfully defibered in different conditions to produce suitable fibers for insulation panel production.The aim of the study is also to evaluate the effects of the TT on the lowering of energy consumption necessary for the defibering process while producing good quality fibers.Energy consumption during defibering process shows a significant decrease with the increase the TT severity.Fiber morphology is affected by TT and the morphological quality of the fibers decreases as TT severity increases.The mass percentage of dust was also quantified as a quality marker of produced fibers.Measurements of equilibrium moisture(at 20°C and 65%RH)of the different materials(wood chips before and after TT,produced fibers)show a significant effect of the TT on wood chips hygroscopicity(8.2%for untreated wood to 4.1%for TT at 320°C).However,the effect of the TT on the hygroscopicity reduction of thermally treated wood fibers is drastically less significant due to breaking of the wood structure during defibering process.
文摘In this paper, the factors to influence the dynamic heat - moisture comfort of summer clothing fabrics have been studied. It is pointed out that, when the wind speed outside is high, or the air permeability is very good, the sweat of human body will evaporate mainly through turbulent diffusion. Because of the rapid sweat evaporation, human body will feel cold, and then, the difference in temperature and humidity of the micro - climatic section will be very slight. On the contrary, when the wind speed outside is slow or the air permeability is unsatisfactory, the sweat of human body will evaporate mainly through molecular diffusion, and in this case, the humidity of the micro - climatic section will be depended on the hygroscopicity of the fabric, that’ s to say, the better the hygroscopicity, the lower the humidity. It is difficult for pure wool fabric to loss heat because of its giving out much heat during the course of moisture - absorption in the initial stages of sweating. For pure polyester fabric,
文摘Plant-based concretes are produced from plant aggregates and a binder.Plant fibers are mainly composed of saccharides(sugars)and these sugars can decrease the concentration of Ca2+ions in the cement pore solution and delay the formation of hydration products.To improve the interfacial bond between fibers and matrix a chemical treatment is widely used.This study investigates the effect of sodium hydroxide treatment on physical and hygroscopic properties of Typha aggregates.In particular,a 5%sodium hydroxide solution is used to treat these aggregates and their bulk and absolute densities,porosity,water content and water absorption are evaluated accordingly.Results indicate that bulk and absolute densities increase after treatment from 56.44 kg/m^(3) to 122.57 kg/m^(3) and 541.93 kg/m^(3) to 555.17 kg/m^(3),respectively.NaOH treatment reduces porosity of Typha from 89.58%to 77.92%and decreases water content from 1.4%to 1%.The treatment with sodium hydroxide reduces substantially the water absorption of the aggregates.
基金This study is funded by National Natural Science Foundation(31070502)Public Farewell Project of National Forestry Bureau(201004006-6)support of the Priority Academic Program Development of Jiangsu Higher Education Institutions and Co-innovation Center of Efficient Processing and Utilization of Forest Resources,Nanjing Forestry University,Nanjing 210037,China.
文摘Magnesite-bonded wood wool panel(MWWP)is an inorganic-bonded panel product in which wood excelsior is bonded with magnesite.Lowering the hygroscopicity is one of the key measures to improve the quality of the panel.In this study,moisture absorption mechanism of MWWP and measures generally applied to lower its hygroscopicity were reviewed.Three methods were then experimented to improve the dimensional stability of the panel,including adjusting the molar ratio of raw materials,adding additives and optimizing the conditioning process.The results showed that satisfying dimensional stability could be achieved when the molar ratio of MgO to MgCl_(2) was 5:1,the No.2 composite additive(aluminum powder+NH_(4)H_(2)PO_(4)+ferric alum)was adopted and a constant temperature and humidity treatment was applied in the first stage of conditioning.
文摘The objective of this study was to determine adsorption isotherms and hygroscopic behavior of lyophilized powder from grugru palm. The powders of grugru palm were obtained by lyophilization process without maltodextrin (T1) and with 8% matodextrin (T2). The experimental data were obtained through the static gravimetric method at temperatures (25℃, 30℃, 35℃ and 40℃), with different saturated solutions of salts. The models of GAB, BET, Henderson and Oswin were fitted to experimental data. The values obtained for hygroscopicity were 7.68% and 6.86% and the degrees of caking were 0.33% and 0.09% for T1 and T2, respectively. Mathematical models of adsorption isotherms for grugru palm powders can be classified as Type III. The GAB and Oswin models represented better the behavior of isotherms for T1 and T2. Grugru palm powder showed an increase in the humidity of the monolayer Xm along with increasing temperature. The grugru palm powder demonstrated to be a non-hygroscopic product, non-caking features.
文摘Due to the high hygroscopicity of the plastic packaging material, the device is inevitably subjected to high temperature or high humidity environment during the production and testing process. After the moisture is expanded, the internal stress is too large, and the delamination and gold wire breakage are formed. At the same time, due to the difference in the coefficient of thermal expansion (CTE) between the plastic packaging material and the materials such as Si and Cu, it is easy to form delamination under a relatively large shear force. The water vapor remaining in the plastic packaging material is the root cause of delamination, and the reflow process and temperature are the predisposing factors leading to delamination. However, it has been found through experiments that different plastic packaging materials have different hygroscopicity and cohesiveness, and they have obvious improvement effects on delamination.
文摘In this paper, the authors investigated some microphysical and optical properties of continental clean aerosols from OPAC to determine the effect of hygroscopic growth at the spectral range of 0.25 μm to 2.5 μm and eight relative humidities (RHs) (0%, 50%, 70%, 80%, 90%, 95%, 98% and 99%). The microphysical properties extracted were radii, volume mix ratio, number mix ratio and mass mix ratio as a function of RH while the optical properties are scattering and absorption coefficients and asymmetric parameters. Using the microphysical properties, growth factors of the mixtures were determined while using optical properties the enhancement parameters were determined and then parameterized using some models. We observed that the data fitted the models very well. The angstrom coefficients show that the mixture has bimodal type of distribution with the dominance of fine mode particles.