EFFECT OF FIBER FAILURE ON QUASI-STATIC UNLOADING/RELOADING HYSTERESIS LOOPS OF CERAMIC MATRIX COMPOSITES

The two-parameter Weibull model is used to describe the fiber strength distribution.The stress carried by the intact and fracture fibers on the matrix crack plane during unloading/reloading is determined based on the global load sharing criterion.The axial stress distribution of intact fibers upon unloading and reloading is determined based on the mechanisms of fiber sliding relative to matrix in the interface debonded region.The interface debonded length,unloading interface counter slip length,and reloading interface new slip length are obtained by the fracture mechanics approach.The hysteresis loops corresponding to different stresses considering fiber failure are compared with the cases without considering fiber failure.The effects of fiber characteristic strength and fiber Weibull modulus on the fiber failure,the shape,and the area of the hysteresis loops are analyzed.The predicted quasi-static unloading/reloading hysteresis loops agree well with experimental data.

A Sensitivity Mapping Technique for Tensile Force and Case Depth Characterization Based on Magnetic Minor Hysteresis Loops

In the nondestructive testing and evaluation area,magnetic major hysteresis loop measurement technology are widely applied for ferromagnetic material evaluation.However the characterization ability of major hysteresis loop measurement technology greatly varies as the evaluated target properties.To solve this limitation,magnetic minor hysteresis loops,which reflect the responses of ferromagnetic material magnetization in a systematic way,is recommend.Inspired by plenty of information carried by the minor loops,the sensitivity mapping technique was developed to achieve the highest sensitivity of minor-loop parameters to the nondestructively evaluated targets.In this study,for the first time,the sensitivity mapping technique is used to measure the tensile force in a steel strand and evaluate the effective case depth in induction-hardened steel rods.The method and procedures for the sensitivity mapping technique are given before experimental detection.The obtained experimental results indicate that the linear correlation between the induced voltage(or the magnetic induction intensity)and the tensile force(or effective case depth)exists at most of the locations in the cluster of minor loops.The obtained sensitivity maps can be used to optimize the applied magnetic field(or excitation current)and the analyzed locations at the minor loops for achieving the highest sensitivity.For the purpose of tensile force measurement,it is suggested that the strand should be firstly magnetized to the near-saturation state and then restored to the remanent state.In this way,the highest sensitivity is obtained as about 15.26 mV/kN.As for the induction-hardened steel rods,the highest sensitivity of magnetic induction intensity to the effective case depth occurs under low magnetic field conditions and the absolute value of the highest sensitivity is about 0.1110 T/mm.This indicates that if the highest sensitivity is required in the case depth evaluation,the induction-hardened steel rods are only required to be weakly magnetized.The proposed sensitivity mapping technique shows the good performance in the high-sensitivity evaluation of tensile force and case depth in ferromagnetic materials and its application scope can be extended to other nondestructive detection fields.

Hysteresis loop behaviors of ferroelectric thin films: A Monte Carlo simulation study

The ferroelectric response of bismuth titanate Bi4Ti3O12 （BIT） thin film is studied through a Monte Carlo simulation of hysteresis loops. The ferroelectric system is described by using a Diffour Hamiltonian with three terms： the electric field applied in the z direction, the nearest dipole-dipole interaction in the transversal （x-y） direction, and the nearest dipole-dipole interaction in the direction perpendicular to the thin film （the z axis）. In the sample construction, we take into consideration the dipole orientations of the monoclinic and orthorhombic structures that can appear in BIT at low temperature in the ferroelectric state. The effects of temperature, stress, and the concentration of pinned dipole defects are assessed by using the hysteresis loops. The results indicate the changes in the hysteresis area with temperature and stress, and the asymmetric hysteresis loops exhibit evidence of the imprint failure mechanism with the emergence of pinned dipolar defects. The simulated shift in the hysteresis loops conforms to the experimental ferroelectric response.

Random crystal field effect on hysteresis loops and compensation behavior of mixed spin-(1,3/2) Ising system

Magnetic hysteresis and compensation behavior of a mixed spin-（1, 3/2） Ising model on a square lattice are investigated in the framework of effective field theory based on a probability distribution technique. The effect of random crystal field, ferromagnetic and ferrimagnetic exchange interaction on hysteresis loops and compensation phenomenon are discussed. A number of characteristic phenomena have been reported such as the observation of triple hysteresis loops at low temperatures and for negative values of random crystal field. Critical and double compensation temperatures have been also found. The obtained results are also compared to some previous works.

Factors Affecting the Squareness of Hysteresis Loops of Sintered NdFeB Magnets

Investigation into the magnets with different squareness of hysteresis loop(SHL) reveals that the microstructure of sintered NdFeB magnets has great effects on the SHL of the magnets. The abnormal grain growth deteriorates the SHL seriously. The shape of the grain and the grain boundary affect the intensity of demagnetization field, and consequently on the SHL. The added elements have effects on the phase structures and distributions in the magnets, which influences the uniform of demagnetization field.

The hysteresis loops of a ferroelectric bilayer film with surface transition layers

Based on the transverse Ising model in the framework of the mean field approximation, this paper discusses a ferroelectric bilayer film with the surface transition layers within each constituent slab and an antiferroelectric interracial coupling between two slabs. The hysteresis loop of a bilayer film is investigated. The results show that the surface transition layer in a ferroelectric bilayer film plays a significant role in realizing the multiple-state memory.

Application of Fractal Theory in Simulation of Ferromagnetic Elements' Hysteresis Loop in Transformer

The simulation of the transformer transient is one of the indispensable qualifications for improving the performance of transformer protection, the key technique of the transformer's transient simulation is the treatment of ferromagnetic elements' loop. Thus the shapes of the primary hysteresis loop and each internal secondary hysteresis loop in the identical magnetism conducting are analyzed, and then it is proposed that there are some fractal characteristics in the relation between them. The fractal phenomenon of the ferromagnetic elements' hysteresis loop in the transformer's transient simulation is first brought forward, the mutuality between the ferromagnetic elements' primary hysteresis loop and its secondary hysteresis loops is revealed in mechanism by using the fractal theory. According to the iterated function system of fractal theory, the secondary hysteresis loops can be generated by the iterative calculation of the primary loop. The simulation results show the validity of this idea.

Correlation between the Cyclic Stress Behavior and Microstructure in 316LN based on the Analysis of Hysteresis Loops

Total strain controlled cyclic test was performed on 316 LN under uniaxial loadings. Through the partitioning of hysteresis loops, the evolution of two components of cyclic flow stress, the internal and effective stresses, was reported. The former one determines the cyclic stress response. Based on the transmission electron microscopic（TEM） observation on specimens loaded with scheduled cycles, it is found that planar dislocation structures prevail during the entire cyclic process at low strain amplitude, while a remarkable dislocation rearrangement from planar structures to heterogeneous spatial distributions is companied by a cyclic softening behavior at high strain amplitude. The competition between the evolution of the intergranular and the intragranular components of the internal stress caused by the transition of slip mode induces the cyclic hardening and softening at high strain levels. The intergranular internal stress represents the most part of the internal stress at low strain level.

High energy storage density in NaNbO_(3) antiferroelectrics with double hysteresis loop

Antiferroelectrics(AFEs)possess great potential for high performance dielectric capacitors,due to their distinct double hysteresis loop with high maximum polarization and low remnant polarization.However,the well-known NaNbO_(3) lead-free antiferroelectric(AFE)ceramic usually exhibits square-like P–E loop related to the irreversible AFE P phase to ferroelectric(FE)Q phase transition,yielding low recoverable energy storage density(Wrec).Herein,significantly improved Wrec up to 3.3 J/cm^(3) with good energy storage efficiency(η)of 42.4% was achieved in Na_(0.7)Ag_(0.3)Nb_(0.7)Ta_(0.3)O_(3)(30Agsingle bond30Ta)ceramic with well-defined double P–E loop,by tailoring the A-site electronegativity with Ag+and B-site polarizability with Ta^(5+).The Transmission Electron Microscope,Piezoresponse Force Microscope and in-situ Raman spectra results verified a good reversibility between AFE P phase and high-field-induced FE Q phase.The improved stability of AFE P phase,being responsible for the double P–E loop and improved Wrec,was attributed to the decreased octahedral tilting angles and cation displacements.This mechanism was revealed by synchrotron X-ray diffraction and Scanning Transmission Electron microscope.This work provides a good paradigm for achieving double P–E loop and high energy storage density in NaNbO_(3)-based ceramics.

Susceptibility and Inverted Hysteresis Loop of Prussian Blue Analogs with Orthorhombic Structure

The magnetic susceptibility of ternary metal Prussian blue analogues with orthorhombic structure is studied using Ising model. Within the frame work of effective-field theory with correlations, the roles of the mole fraction y, uniaxial magnetic anisotropy, transverse and longitudinal magnetic field are discussed in detabls. The temperature dependence of the magnetic susceptibility is also investigated. The interesting phenomenon of the inverted magnetic hysteresis loop has been found. The results can help to understand the experimental work of the molecule-based ferri- ferrimagnet.

Three-Dimensional Phase Field Simulations of Hysteresis and Butterfly Loops by the Finite Volume Method

Three-dimensional simulations of ferroelectric hysteresis and butterfly loops are carried out based on solving the time dependent Ginzburg-Landau equations using a finite volume method. The influence of externally mechanical loadings with a tensile strain and a compressive strain on the hysteresis and butterfly loops is studied numerically. Different from the traditional finite element and finite difference methods, the finite volume method is applicable to simulate the ferroelectric phase transitions and properties of ferroelectric materials even for more realistic and physical problems.

A Nonlinear Observer Approach of SOC Estimation Based on Hysteresis Model for Lithium-ion Battery

In this paper, a state of charge U+0028 SOC U+0029 estimation approach for lithium-ion battery based on equivalent circuit model and the input-to-state stability U+0028 ISS U+0029 theory has been proposed. According to the electrochemical performance of lithiumion battery, the equivalent circuit model with two RC networks is established, which includes hysteresis characteristic in inner electrochemical response process. The nonlinear relation between open circuit voltage U+0028 OCV U+0029 and SOC is obtained from a rapid test. Exponential fitting method is used to identify the parameters of the model. A novel state observer based on ISS theory is designed for lithium-ion battery SOC estimation. The designed observer is tested on AMESim and Simulink co-simulation. The simulation results show that the proposed method has a high SOC estimation accuracy with an error of about 2 percent. © 2017 Chinese Association of Automation.

CYCLIC HYSTERESIS ENERGY OF CARBON AND ALLOY STEELS

Based on the low-cycle fatigue tests of carbon and alloy steels,the cyclic properties of hysteresis energy and its changing rules have been analysed.The mathematical formula of cyclic hysteresis energy of the materials with different cyclic properties have been presented. The total absorbed energy to failure is associated with the variation of cyclic hysteresis energy.

Asymmetric Magnetization Reversal Probed by Recoil Loop Measurements in an Exchange Biased La0.67Sr0.33MnO3/La0.33Ca0.67MnO3 Bilayer Film

We exploit the recoil loop measurements to study La0.07 Sr0.33 Mn O3/La0.33 Ca0.67 Mn O3 bilayer film. the asymmetric magnetization reversal in an exchange-biased It is found that the recoil curve encloses a marked area only in the second quadrant of the hysteresis loop, and the recoil susceptibility in the descending branch of the major loop is evidently higher than that in the ascending branch. The study indicates that the exchange anisotropy of a unidirectional nature and an orientation deviated from the easy axis of the ferromagnetic layer plays a crucial role in creating the reversal asymmetry.

Hysteresis of the Magnetic Particle in a Dipolar Ising Model

Zero-temperature Monte Carlo simulations are used to investigate the hysteresis of a magnetic particle ina dipolarIsing model. The magnetic particle is described in a system of permanent dipoles, and the dipoles are locatedin a cubic lattice site. The effects of the shape and the size of the particle on the hysteresis loop at zero temperatureare obtained. For strong exchange interactions, the shapes of magnetic hysteresis loops approach rectangle. For weakexchange interactions, the effects of the size and the shape of the particle on the loops are more remarkable than thoseof strong exchange interactions case. The slope of the hysteresis loop decreases with the increase of the ratio of thesemi major axis to the semi minor axis of the ellipsoidal magnetic particle, and there is an increase of the slope of thehysteresis with the decrease of the size of the magnetic particle. The effects of the shape and size of the particle on thecoercive force at zero temperature are also investigated.

Simulation of magnetization process and Faraday effect of magnetic bilayer films

We described ferromagnetic film and bilayer films composed of two ferromagnetic layers coupled through antiferromagnetic interfacial interaction by classical Heisenberg model and simulated their magnetization state,magnetic permeability,and Faraday effect at zero and finite temperature by using the Landau–Lifshitz–Gilbert(LLG)equation.The results indicate that in a microwave field with positive circular polarization,the ferromagnetic film has one resonance peak while the bilayer film has two resonance peaks.However,the resonance peak disappears in ferromagnetic film,and only one resonance peak emerges in bilayer film in the negative circularly polarized microwave field.When the microwave field’s frequency exceeds the film’s resonance frequency,the Faraday rotation angle of the ferromagnetic film is the greatest,and it decreases when the thickness of the two halves of the bilayer is reduced.When the microwave field’s frequency remains constant,the Faraday rotation angle fluctuates with temperature in the same manner as spontaneous magnetization does.When a DC magnetic field is applied in the direction of the anisotropic axis of the film,the Faraday rotation angle varies with the DC magnetic field and shows a similar shape of the hysteresis loop.

Mechanical behavior of red sandstone under cyclic point loading

The mechanical properties of red sandstone subjected to cyclic point loading were investigated. Tests were conducted using MTS servohydraulic landmark test system, under cyclic loadings with constant amplitudes and increasing multi-level amplitudes. The frequencies range from 0.1 to 5 Hz and lower limit load ratios range from 0 to 0.60. Laboratory investigations were performed to find the effect of the frequency and the lower limit load ratio on the fatigue life and hysteresis properties of sandstone. The results show that the fatigue life of sandstone decreases first and then increases with the increase of frequency and lower limit load ratio. Under the same cycle number, the spacing between hysteresis loops increases with rising frequency and decreasing lower limit load ratio. The existence of “training” and “memory” effects in red sandstone under cyclic point loading was proved.

Review of Kelvin's Equation and Its Modification in Characterization of Mesoporous Materials

Physical and mathematical models as well as calculation methods of nitrogen bed on porous media have been introduced to evaluate the structural parameters of mesoporous materials. Kelvin＇s equation is a link between the relative adsorbate pressure, the mean pore radius, and pore capillarity on the basis of macroscopic capillary condensation. However, Kelvin＇s equation has been identified that it underestimates the calculated pore size of a material especially in the boundary of pore size which is between 2 and 4 nm.Various modifications on Kelvin＇s equation were mentioned in order to develop a new model to improve the accuracy of pore size calculation. The problems on conventional mathematical models were analyzed and discussed. A number of calculation methods on physisorption and pore size, especially fundamental theories of physisorption, basis of models and their deficiencies are reviewed. It can provide guidance on developing a modified Kelvin＇s equation for pore size calculation.

Effects of Cr_3C_2 content and wheel speed on amorphization behavior of melt-spun SmCo_(7-x)(Cr_3C_2)_x alloys

The effects of the Cr3C2 content and wheel speed on the amorphization behavior of the melt-spun SmCo7-x（Cr3C2）x （x=0.10-0.25） alloys were studied systematically by X-ray diffraction analysis （XRD）, differential scanning calorimetry （DSC） and magnetic measurements. The ribbon melt-spun at lower wheel speed （20 m/s） has composite structure composed of mostly SmCo7 and a small amount of Sm2Co17R. The grain size of SmCo7 phase decreases with the increase of Cr3C2 content. With the increase of wheel speed, the XRD peaks become lower and accompanied with a broad increase in backgrounds, indicating a considerable decrease in the grain size of the SmCo7 phase. When the wheel speed increases to 40 m/s, SmCo7-x（Cr3C2）x alloys can be obtained in the amorphous state for 0.15≤x≤0.25 with intrinsic coercive Hci of 0.004-0.007 T. The DSC analysis reveals that SmCo7 phase firstly precipitates from the amorphous matrix at 650 °C, followed by the crystallization of Sm2Co17 phase at 770 °C.

Evaluation of properties for a passive damping device with TiNi alloy rings as energy dissipating element

A new kind of passive damping device that is composed of TiNi shape memory alloy （SMA） rings is designed.The basic mechanical behaviors of the device are investigated and its damping capacity is analyzed.There still exist hysteresis loops during loading and unloading when the deformation of the ring（s） is restricted in the horizontal direction properly,but the force-displacement curves are tilted and not parallel to the abscissa,which can improve the ability to withstand overloading.If there is no restriction,the force-displacement curves of the rings are near linear though the unloading paths are slightly different from those of loading.The basic mechanical and damping properties of the device may be changed by using different numbers of TiNi alloy rings,and the damping capacity will be increased markedly by increasing the number of rings.