A dynamic triaxial instrument was used to study the effects of different concentrations of sodium chloride and stress amplitudes on the dynamic properties of an expansive soil under cyclic loading.In particular,four p...A dynamic triaxial instrument was used to study the effects of different concentrations of sodium chloride and stress amplitudes on the dynamic properties of an expansive soil under cyclic loading.In particular,four parameters were considered in such a parametric investigation,namely,hysteresis curve morphology characteristic non-closure degreeεp,the ratio of the short and long axisα,the slope of the long axis k and the enclosed area S.The results show that with an increase in the sodium chloride concentration,the soil particle double electric layer becomes thinner,the distance between soil particles decreases,and the whole sample becomes denser.Theεp-N,α-N and S–N relation curves all show a decreasing trend.The ratio of plastic deformation to total deformation grows with increasing the dynamic stress amplitude,and the curves show an upwards trend.The k-N relationship curve displays an increasing trend with the concentration and a general downwards trend as the dynamic stress amplitude is made higher.This also indicates that sodium chloride solutions can improve the engineering properties of expansive soil to a certain extent.With an increase in the vibration times N,the shape of the hysteretic curve becomes narrower,and the whole soil exhibits a cyclic strain hardening.With the help of an exponential function,a model is introduced to predict the relationship between the concentration and the hysteretic curve.展开更多
The influence of the hysteretic behaviour in reactive sputtering with a pure aluminium target in the presence of argon and oxygen plasma on transmittance and surface free energy of aluminium oxide films was investigat...The influence of the hysteretic behaviour in reactive sputtering with a pure aluminium target in the presence of argon and oxygen plasma on transmittance and surface free energy of aluminium oxide films was investigated by plasma optical emission spectroscopy technology. The evolutions of aluminium, and aluminium oxide emission lines as functions of oxygen flow rate at constant power and pressure were studied. A steep transition from the metallic sputtering to the compound sputtering was observed upon increasing the oxygen flow rate from 0.0 SCCM to above 2.0 SCCM. Then an optimal deposition zone was obtained through analyzing the hysteretic curves of aluminium and aluminium oxide emission lines. The evolution of crystal structures of samples was discerned by X-ray diffraction spectra data. Energy dispersive X-ray spectroscopy data also demonstrate the relationship between the chemical compositions of aluminium oxide films and the hysteretic behaviour. The film deposited between 1.5 SCCM and 2.0 SCCM oxygen flow rate displays an optimal and stoichiometic atomic ratio of O to Al and mass ratio of O to Al. The changes in the transmittance of samples were discovered to depend on the oxygen flow rate by UV-VIS transmittance spectra, and the changes in surface free energy were studied by contact angle measurement.展开更多
Due to the long construction life,improper design methods,brittle material properties and poor construction techniques,most existing masonry structures do not perform well during earthquakes.The retrofitting method us...Due to the long construction life,improper design methods,brittle material properties and poor construction techniques,most existing masonry structures do not perform well during earthquakes.The retrofitting method using an external steel-meshed mortar layer is widely used to retrofit existing masonry buildings.Assessing the seismic performance of masonry walls reinforced by an external steel-meshed mortar layer reasonably and effectively is a difficult subject in the research field of masonry structures.Based on the combined finite-discrete elements method,the numerical models of retrofitted brick walls with four different masonry mortar strengths by an external mortar layer are established.The shear strength of mortar and the contact between the retrofitted mortar layer and the brick blocks are discussed in detail.The failure patterns and load-displacement curves of the retrofitted brick walls were obtained by applying low cycle reciprocating loads to the numerical model,and the bearing capacity and the failure mechanism of the retrofitted walls were obtained by comparing the failure patterns,ultimate bearing capacity,deformability and other aspects with the tests.This study provides a basis for improving the seismic strengthening design method of masonry structures and helps to better assess the seismic performance of masonry structures after retrofitting.展开更多
A beam-column joint of precast and partial steel reinforced concrete( PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is locate...A beam-column joint of precast and partial steel reinforced concrete( PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is located in the core joint region and the connections between concrete members. This paper presents an experimental study of a series of PPSRC specimens. These specimens are tested under low cyclic loading.Experimental results demonstrate that the bearing capacity of the PPSRC specimens is 3 times that of the ordinary reinforced concrete( RC) beam-column joints. The strength and stiffness degradation rates are slower compared with that of the RC beam-column joints. In addition,the strength of the core joint region and the connections is higher than other parts of the PPSRC specimens. Beam failure occurs firstly for the PPSRC specimens,followed by column failure and connections failure. The failure of the core joint region occurs finally.Test results show that the seismic performance of the PPSRC is better than that of the ordinary RC beam-column joints.展开更多
文摘A dynamic triaxial instrument was used to study the effects of different concentrations of sodium chloride and stress amplitudes on the dynamic properties of an expansive soil under cyclic loading.In particular,four parameters were considered in such a parametric investigation,namely,hysteresis curve morphology characteristic non-closure degreeεp,the ratio of the short and long axisα,the slope of the long axis k and the enclosed area S.The results show that with an increase in the sodium chloride concentration,the soil particle double electric layer becomes thinner,the distance between soil particles decreases,and the whole sample becomes denser.Theεp-N,α-N and S–N relation curves all show a decreasing trend.The ratio of plastic deformation to total deformation grows with increasing the dynamic stress amplitude,and the curves show an upwards trend.The k-N relationship curve displays an increasing trend with the concentration and a general downwards trend as the dynamic stress amplitude is made higher.This also indicates that sodium chloride solutions can improve the engineering properties of expansive soil to a certain extent.With an increase in the vibration times N,the shape of the hysteretic curve becomes narrower,and the whole soil exhibits a cyclic strain hardening.With the help of an exponential function,a model is introduced to predict the relationship between the concentration and the hysteretic curve.
基金supported by the Fundamental Research Funds for the Central Universities of China(N110403011)Science and Technology Plan of Shenyang City(F12-028-200),China
文摘The influence of the hysteretic behaviour in reactive sputtering with a pure aluminium target in the presence of argon and oxygen plasma on transmittance and surface free energy of aluminium oxide films was investigated by plasma optical emission spectroscopy technology. The evolutions of aluminium, and aluminium oxide emission lines as functions of oxygen flow rate at constant power and pressure were studied. A steep transition from the metallic sputtering to the compound sputtering was observed upon increasing the oxygen flow rate from 0.0 SCCM to above 2.0 SCCM. Then an optimal deposition zone was obtained through analyzing the hysteretic curves of aluminium and aluminium oxide emission lines. The evolution of crystal structures of samples was discerned by X-ray diffraction spectra data. Energy dispersive X-ray spectroscopy data also demonstrate the relationship between the chemical compositions of aluminium oxide films and the hysteretic behaviour. The film deposited between 1.5 SCCM and 2.0 SCCM oxygen flow rate displays an optimal and stoichiometic atomic ratio of O to Al and mass ratio of O to Al. The changes in the transmittance of samples were discovered to depend on the oxygen flow rate by UV-VIS transmittance spectra, and the changes in surface free energy were studied by contact angle measurement.
基金National Key Research and Development Program of China under Grant Nos. 2018YFC1504400 and 2019YFC1509301Natural Science Foundation of China under Grant No. 52078471Scientific Research Fund of Institute of Engineering Mechanics,China Earthquake Administration under Grant No. 19EEEVL0402
文摘Due to the long construction life,improper design methods,brittle material properties and poor construction techniques,most existing masonry structures do not perform well during earthquakes.The retrofitting method using an external steel-meshed mortar layer is widely used to retrofit existing masonry buildings.Assessing the seismic performance of masonry walls reinforced by an external steel-meshed mortar layer reasonably and effectively is a difficult subject in the research field of masonry structures.Based on the combined finite-discrete elements method,the numerical models of retrofitted brick walls with four different masonry mortar strengths by an external mortar layer are established.The shear strength of mortar and the contact between the retrofitted mortar layer and the brick blocks are discussed in detail.The failure patterns and load-displacement curves of the retrofitted brick walls were obtained by applying low cycle reciprocating loads to the numerical model,and the bearing capacity and the failure mechanism of the retrofitted walls were obtained by comparing the failure patterns,ultimate bearing capacity,deformability and other aspects with the tests.This study provides a basis for improving the seismic strengthening design method of masonry structures and helps to better assess the seismic performance of masonry structures after retrofitting.
文摘A beam-column joint of precast and partial steel reinforced concrete( PPSRC) is proposed for precast reinforced concrete frames. The PPSRC consists of partial steel and reinforced concrete. The partial steel is located in the core joint region and the connections between concrete members. This paper presents an experimental study of a series of PPSRC specimens. These specimens are tested under low cyclic loading.Experimental results demonstrate that the bearing capacity of the PPSRC specimens is 3 times that of the ordinary reinforced concrete( RC) beam-column joints. The strength and stiffness degradation rates are slower compared with that of the RC beam-column joints. In addition,the strength of the core joint region and the connections is higher than other parts of the PPSRC specimens. Beam failure occurs firstly for the PPSRC specimens,followed by column failure and connections failure. The failure of the core joint region occurs finally.Test results show that the seismic performance of the PPSRC is better than that of the ordinary RC beam-column joints.