Using shapes correlation for active contour segmentation of uterine fibroid ultrasound images in computer-aided therapy

Segmenting the lesion regions from the ultrasound （US） images is an important step in the intra-operative planning of some computer-aided therapies. High-Intensity Focused Ultrasound （HIFU）, as a popular computer-aided therapy, has been widely used in the treatment of uterine fibroids. However, such segmentation in HIFU remains challenge for two reasons： （1） the blurry or missing boundaries of lesion regions in the HIFU images and （2） the deformation of uterine fibroids caused by the patient＇s breathing or an external force during the US imaging process, which can lead to complex shapes of lesion regions. These factors have prevented classical active contour-based segmentation methods from yielding desired results for uterine fibroids in US images. In this paper, a novel active contour-based segmentation method is proposed, which utilizes the correlation information of target shapes among a sequence of images as prior knowledge to aid the existing active contour method. This prior knowledge can be interpreted as a unsupervised clustering of shapes prior modeling. Meanwhile, it is also proved that the shapes correlation has the low-rank property in a linear space, and the theory of matrix recovery is used as an effective tool to impose the proposed prior on an existing active contour model. Finally, an accurate method is developed to solve the proposed model by using the Augmented Lagrange Multiplier （ALM）. Experimental results from both synthetic and clinical uterine fibroids US image sequences demonstrate that the proposed method can consistently improve the performance of active contour models and increase the robustness against missing or misleading boundaries, and can greatly improve the efficiency of HIFU therapy.

Multi-sensor image registration using multi-resolution shape analysis

Multi-sensor image registration has been widely used in remote sensing and medical image field, but registration performance is degenerated when heterogeneous images are involved. An image registration method based on multi-resolution shape analysis is proposed in this paper, to deal with the problem that the shape of similar objects is always invariant. The contours of shapes are first detected as visual features using an extended contour search algorithm in order to reduce effects of noise, and the multi-resolution shape descriptor is constructed through Fourier curvature representation of the contour’s chain code. Then a minimum distance function is used to judge the similarity between two contours. To avoid the effect of different resolution and intensity distribution, suitable resolution of each image is selected by maximizing the consistency of its pyramid shapes. Finally, the transformation parameters are estimated based on the matched control-point pairs which are the centers of gravity of the closed contours. Multi-sensor Landsat TM imagery and infrared imagery have been used as experimental data for comparison with the classical contour-based registration. Our results have been shown to be superior to the classical ones.

Analysis of Object Depth Effects on Accuracy of Dimensional Shape in X and Y Directions Using Single Non-metric Image

In general, to reconstruct the accurate shape of buildings, we need at least one stereomodel （two photographs） for each building. In most cases, however, only a single non-metric photograph is available, which is usually obtained either by an amateur, such as a tourist, or from a newspaper or a post card. To evaluate the validity of 3D reconstruction from a single non-metric image, this study analyzes the effects of object depth on the accuracy of dimensional shape in X and Y directions using a single non-metric image by means of simulation technique, as this was considered to be, in most cases, a main source of data acquisition in recording and documenting buildings.

语义增强图像-文本预训练模型的零样本三维模型分类

目前,基于对比学习的图像-文本预训练模型(CLIP)在零样本3维模型分类任务上表现出了巨大潜力,然而3维模型和文本之间存在巨大的模态鸿沟,影响了分类准确率的进一步提高。针对以上问题,该文提出一种语义增强CLIP的零样本3维模型分类方法。该方法首先将3维模型表示成多视图;然后为了增强零样本学习对未知类别的识别能力,通过视觉语言生成模型获得每张视图及其类别的语义描述性文本,并将其作为视图和类别提示文本之间的语义桥梁,语义描述性文本采用图像字幕和视觉问答两种方式获取;最后微调语义编码器将语义描述性文本具化为类别的语义描述,其拥有丰富的语义信息和较好的可解释性,有效减小了视图和类别提示文本的语义鸿沟。实验表明,该文方法在ModelNet10和ModelNet40数据集上的分类性能优于现有的零样本分类方法。

Using shape contexts method for registration of contra lateral breasts in thermal images

AIM: To achieve symmetric boundaries for left and right breasts boundaries in thermal images by registration. METHODS: The proposed method for registration consists of two steps. In the first step, shape context, an approach as presented by Belongie and Malik was applied for registration of two breast boundaries. The shape context is an approach to measure shape similarity. Two sets of finite sample points from shape contours of two breasts are then presented. Consequently, the correspondences between the two shapes are found. By finding correspondences, the sample point which has the most similar shape context is obtained. RESULTS: In this study, a line up transformation which maps one shape onto the other has been estimated in order to complete shape. The used of a thin plate spline permitted good estimation of a plane transformation which has capability to map unselective points from one shape onto the other. The obtained aligningtransformation of boundaries points has been applied successfully to map the two breasts interior points. Some of advantages for using shape context method in this work are as follows:(1) no special land marks or key points are needed;(2) it is tolerant to all common shape deformation; and(3) although it is uncomplicated and straightforward to use, it gives remarkably powerful descriptor for point sets significantly upgrading point set registration. Results are very promising. The proposed algorithm was implemented for 32 cases. Boundary registration is done perfectly for 28 cases.CONCLUSION: We used shape contexts method that is simple and easy to implement to achieve symmetric boundaries for left and right breasts boundaries in thermal images.

Shape characterization of sand particles based on digital image processing technology

To characterize the shape of sand particles for concrete,a new method is proposed based on digital image processing(known as the DIP method).By analyzing sand particles projection,the length,width and thickness of sand were measured to characterize particle form.The area and perimeter were measured to characterize particle angularity.The results of the DIP method and Vernier caliper were compared to examine the accuracy of the DIP method.The sample size test was conducted to show the statistical significance of shape results measured by the DIP method.The practicality of the DIP method was verified by instance analysis.The results show that aspect ratios and roundness measured by the DIP method are equal to ones by the Vernier caliper.Results by DIP are dependent on the sand particle number,and at least 350 particles should be measured to represent the overall shape property of sand.The results show that the DIP method is able to distinguish the differences in the shape of sand particles.It achieves the direct measurement of sand particle thickness,and the characterization results of sand aspect ratios and roundness are accurate,statistically significant and practical.Therefore,the DIP method is suitable for sand particle shape characterization.

Evolutionary Computation Based Optimization of Image Zernike Moments Shape Feature Vector

The image shape feature can be described by the image Zernike moments. In this paper, we points out the problem that the high dimension image Zernike moments shape feature vector can describe more detail of the original image but has too many elements making trouble for the next image analysis phases. Then the low dimension image Zernike moments shape feature vector should be improved and optimized to describe more detail of the original image. So the optimization algorithm based on evolutionary computation is designed and implemented in this paper to solve this problem. The experimental results demonstrate the feasibility of the optimization algorithm.

STUDY OF RECOGNITION TECHNIQUE OF RADAR TARGET'S ONE-DIMENSIONAL IMAGES BASED ON RADIAL BASIS FUNCTION NETWORK

This paper studies the problem applying Radial Basis Function Network(RBFN) which is trained by the Recursive Least Square Algorithm(RLSA) to the recognition of one dimensional images of radar targets. The equivalence between the RBFN and the estimate of Parzen window probabilistic density is proved. It is pointed out that the I/O functions in RBFN hidden units can be generalized to general Parzen window probabilistic kernel function or potential function, too. This paper discusses the effects of the shape parameter a in the RBFN and the forgotten factor A in RLSA on the results of the recognition of three kinds of kernel function such as Gaussian, triangle, double-exponential, at the same time, also discusses the relationship between A and the training time in the RBFN.

A method of automatic shape depiction and information extraction for oceanic eddies in SAR images

Synthetic aperture radar （SAR） provides a large amount of image data for the observation and research of oceanic eddies. The use of SAR images to automatically depict the shape of eddies and extract the eddy information is of great significance to the study of the oceanic eddies and the application of SAR eddy images. In this paper, a method of automatic shape depiction and information extraction for oceanic eddies in SAR images is proposed, which is for the research of spiral eddies. Firstly, the skeleton image is got by the skeletonization of SAR image. Secondly, the logarithmic spirals detected in the skeleton image are drawn on the SAR image to depict the shape of oceanic eddies. Finally, the eddy information is extracted based on the results of shape depiction. The sentinel 1 SAR eddy images in the Black Sea area were used for the experiment in this paper. The experimental results show that the proposed method can automatically depict the shape of eddies and extract the eddy information. The shape depiction results are consistent with the actual shape of the eddies, and the extracted eddy information is consistent with the reference information extracted by manual operation. As a result, the validity of the method is verified.

规训与新生--民国教育革新视域下学生形象塑造与服制变化

在中国近代社会的变革中,教育革新使学生群体从封建帝制下只为求取功名的书生,转变为中华民族思想觉醒的中坚力量和爱国运动中的关键角色。新教育体制下,学校从体育、智育、德育与美育方面对学生的内在思想与外在形象进行全面的教育重塑。其中,对学生形象的塑造包含了身体规训与服饰制度两个维度。教育部在1912年、1918年、1929年和1937年先后拟定、修正和颁布了统一的学校学生制服规程,对不同年龄、不同学习阶段学生穿着的制服形制加以规范。本文即以近代这一重要的教育革新时期为视角,梳理了民国新教育背景下制定与施行“学生制服规程”的动因、理念及内容,并进一步探讨它对于学生形象塑造及其精神构铸的重要意义,以期对我们今天探索如何结合各地文化特色进行多样性校服设计提供一定的启示。

Development of a mass model in estimating weight-wise particle size distribution using digital image processing

Particle size distribution of coarse aggregates through mechanical sieving gives results in terms of cumu- lative mass percent. But digital image processing generated size distribution of particles, while being fast and accurate, is often expressed in terms of area function or number of particles. In this paper, a mass model is developed which converts the image obtained size distribution to mass-wise distribution, mak- ing it readily comparable to mechanical sieving data. The concept of weight/particle ratio is introduced for mass reconstruction from 2D images of particle aggregates. Using this mass model, the effects of several particle shape parameters （such as major axis, minor axis, and equivalent diameter） on sieve-size of the particles is studied. It is shown that the sieve-size of a particle strongly depend upon the shape param- eters, 91% of its variation being explained by major axis, minor axis, bounding box length and equivalent diameter. Furthermore, minor axis gives an overall accurate estimate of particle sieve-size, error in mean size （D-50） being just 0.4%. However, sieve-size of smaller particles （〈20 ram） strongly depends upon the length of the smaller arm of the bounding box enclosing them and sieve-sizes of larger particles （〉20 mm） are highly correlated to their equivalent diameters. Multiple linear regression analysis has been used to generate overall mass-wise particle size distribution, considering the influences of all these shape parameters on particle sieve-size. Multiple linear regression generated overall mass-wise particle size distribution shows a strong correlation with sieve generated data. The adjusted R-square value of the regression analysis is found to be 99 percent （w.r,t cumulative frequency）. The method proposed in this paper provides a time-efficient way of producing accurate （up to 99%） mass-wise PSD using digital image processing and it can be used effectively to renlace the mechanical sieving.

Real-Time Characterization of Crystal Shape and Size Distribution Based on Moving Window and 3D Imaging in a Stirred Tank

Crystal shape distribution, i.e. the multidimensional size distribution of crystals, is of great importance to their down-stream processing such as in filtration as well as to the end-use properties including the dissolution rate and bioavailability for crystalline pharmaceuticals. Engineering crystal shape and shape distribution requires knowledge about the growth behavior of different crystal facets under varied operational conditions e.g. supersaturations. Measurement of the facet growth rates and growth kinetics of static crystals in a crystallizer without stirring has been reported previously. Here attention is given to study on real-time characterization of the 3D facet growth behavior of crystals in a stirred tank where crystals are constantly moving and rotating. The measurement technique is stereo imaging and the crystal shape reconstruction is based on a stereo imaging camera model. By reference to a case study on potash alum crystallization, it is demonstrated that the crystal size and shape distributions (CSSD) of moving and rotating potash alum crystals in the solution can be reconstructed. The moving window approach was used to correlate 3D face growth kinetics with supersaturation (in the range 0.04 - 0.12) given by an ATR FTIR probe. It revealed that {100} is the fastest growing face, leading to a rapid reduction of its area, while the {111} face has the slowest growth rate, reflected in its area continuously getting larger.

High-resolution Remote Sensing Image Segmentation Using Minimum Spanning Tree Tessellation and RHMRF-FCM Algorithm

It is proposed a high resolution remote sensing image segmentation method which combines static minimum spanning tree(MST)tessellation considering shape information and the RHMRF-FCM algorithm.It solves the problems in the traditional pixel-based HMRF-FCM algorithm in which poor noise resistance and low precision segmentation in a complex boundary exist.By using the MST model and shape information,the object boundary and geometrical noise can be expressed and reduced respectively.Firstly,the static MST tessellation is employed for dividing the image domain into some sub-regions corresponding to the components of homogeneous regions needed to be segmented.Secondly,based on the tessellation results,the RHMRF model is built,and regulation terms considering the KL information and the information entropy are introduced into the FCM objective function.Finally,the partial differential method and Lagrange function are employed to calculate the parameters of the fuzzy objective function for obtaining the global optimal segmentation results.To verify the robustness and effectiveness of the proposed algorithm,the experiments are carried out with WorldView-3(WV-3)high resolution image.The results from proposed method with different parameters and comparing methods(multi-resolution method and watershed segmentation method in eCognition software)are analyzed qualitatively and quantitatively.

Reconstructing the landing trajectory of the CE-3 lunar probe by using images from the landing camera

An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and analyzing the geological background of the landing site. Due to complexities involved in the landing process, there are some differences between the planned trajectory and the actual trajectory of CE-3. The land- ing camera on CE-3 recorded a sequence of the landing process with a frequency of 10 frames per second. These images recorded by the landing camera and high-resolution images of the lunar surface are utilized to calculate the position of the probe, so as to reconstruct its precise trajectory. This paper proposes using the method of trajectory reconstruction by Single Image Space Resection to make a detailed study of the hov- ering stage at a height of 100 m above the lunar surface. Analysis of the data shows that the closer CE-3 came to the lunar surface, the higher the spatial resolution of im- ages that were acquired became, and the more accurately the horizontal and vertical position of CE-3 could be determined. The horizontal and vertical accuracies were 7.09 m and 4.27 m respectively during the hovering stage at a height of 100.02 m. The reconstructed trajectory can reflect the change in CE-3＇s position during the powered descent process. A slight movement in CE-3 during the hovering stage is also clearly demonstrated. These results will provide a basis for analysis of orbit control strategy, and it will be conducive to adjustment and optimization of orbit control strategy in follow-up missions.

High-contrast imaging based on wavefront shaping to improve low signal-to-noise ratio photoacoustic signals using superpixel method

Photoacoustic(PA) imaging has drawn tremendous research interest for various applications in biomedicine and experienced exponential growth over the past decade. Since the scattering effect of biological tissue on ultrasound is two-to three-orders magnitude weaker than that of light, photoacoustic imaging can effectively improve the imaging depth.However, as the depth of imaging further increases, the incident light is seriously affected by scattering that the generated photoacoustic signal is very weak and the signal-to-noise ratio(SNR) is quite low. Low SNR signals can reduce imaging quality and even cause imaging failure. In this paper, we proposed a new wavefront shaping and imaging method of low SNR photoacoustic signal using digital micromirror device(DMD) based superpixel method. We combined the superpixel method with DMD to modulate the phase and amplitude of the incident light, and the genetic algorithm(GA) was used as the wavefront shaping algorithm. The enhancement of the photoacoustic signal reached 10.46. Then we performed scanning imaging by moving the absorber with the translation stage. A clear image with contrast of 8.57 was obtained while imaging with original photoacoustic signals could not be achieved. The proposed method opens new perspectives for imaging with weak photoacoustic signals.

Significance of including lid thickness and particle shape factor in numerical modeling for prediction of particle trap efficiency of invert trap

Sediment accumulation on the bed of open sewers and drains reduces hydraulic efficiency and can cause localized flooding.Slotted invert traps installed underneath the bed of open sewers and drains can eliminate sediment build-up by catching sediment load.Previous three-dimensional(3D)computational studies have examined the particle trapping performance of invert traps of different shapes and depths under varied sediment and flow conditions,considering particles as spheres.For two-dimensional and 3D numerical modeling,researchers assumed the lid geometry to be a thin line and a plane,respectively.In this 3D numerical study,the particle trapping efficiency of a slotted irregular hexagonal invert trap fitted at the flume bottom was examined by incorporating the particle shape factor of non-spherical sewage solid particles and the thicknesses of upstream and downstream lids over the trap in the discrete phase model of the ANSYS Fluent 2020 R1 software.The volume of fluid(VOF)and the realizable k-turbulence models were used to predict the velocity field.The two-dimensional particle image velocimetry(PIV)was used to measure the velocity field inside the invert trap.The results showed that the thicknesses of upstream and downstream lids affected the velocity field and turbulent kinetic energy at all flow depths.The joint impact of the particle shape factor and lid thickness on the trap efficiency was significant.When both the lid thickness and particle shape factor were considered in the numerical modeling,trap efficiencies were underestimated,with relative errors of-8.66%to-0.65%in comparison to the experimental values of Mohsin and Kaushal(2017).They were also lower than the values predicted by Mohsin and Kaushal(2017),which showed an overall overestimation with errors of-2.3%to 17.4%.

Parametric shape prior model used in image segmentation

Due to the frequency of occlusion, cluttering and lowcontrast edges, gray intensity based active contour models oftenfail to segment meaningful objects. Prior shape information is usuallyutilized to segment desirable objects. A parametric shape priormodel is proposed. Firstly, principal component analysis is employedto train object shape and transformation is added to shaperepresentation. Then the energy function is constructed througha combination of shape prior energy, gray intensity energy andshape constraint energy of the kernel density function. The objectboundary extraction process is converted into the parameters solvingprocess of object shape. Besides, two new shape prior energyfunctions are defined when desirable objects are occluded by otherobjects or some parts of them are missing. Finally, an alternatingdecent iteration solving scheme is proposed for numerical implementation.Experiments on synthetic and real images demonstratethe robustness and accuracy of the proposed method.

Human Plantar Pressure Image and Foot Shape Matching

Medical doctors and podiatrists have been using plantar pressure for the evaluation of the foot loading in regard to foot biomechanics and foot health for decades. High plantar pressure can cause pain and foot injury such as plantar ulcer during walking. Two types of systems are suitable for pressure capture and they are commonly known as floor mat or floor pad and in-shoe pad. For the floor-mat system pressure values are displayed as image which does not depict the foot shape. Therefore, shortcoming of this system for plantar pressure recording during walking is that the location of the pressure value related to the plantar surface is only approximate. A research was conducted to determine whether markers can be placed on the plantar surface and their positions identifiable on the pressure image. This paper describes the technique for matching the plantar shape to the pressure image during walking.

Improved HHT and its application in narrowband radar imaging for precession cone-shaped targets

Imaging the spatial precession cone-shaped targets with narrowband radar is a new technical approach in mid-course recognition problem. However, most existing time-frequency methods still have some inevitable deficiencies for extracting microDoppler information in practical applications, which leads to blurring of the image. A new narrowband radar imaging algorithm for the precession cone-shaped targets is proposed. The instantaneous frequency of each scattering point is gained by using the improved Hilbert-Huang transform, then the positions of scattering points in the parameter domain are reconstructed. Numerical simulation and experiment results confirm the effectiveness and high precision of the proposed algorithm.

A DESCRIPTION METHOD FOR ARBITRARILY SHAPED AND SIZED GRANULES IN 2D IMAGE

An alternative method is proposed in this letter for describing the arbitrary shape and size for granules in 2D image.After image binarization, the edge points on contour are detected, by which the centroid of the shape in question is sought using the moment calculation.Using Principal Component Analysis(PCA), the major and minor diameters are computed.Based on the signature curve-fitting, the first-order derivative is taken so as to seek all the characteristic vertices.By connecting the vertices found, the simplified polygon is formed and utilized for shape and size descriptive purposes.The developed algorithm is run on two given real particle images, and the execution results indicate that the computed parameters can technically well describe the shape and size for the original particles, being able to provide a ready-to-use database for machine vision system to perform related data processing tasks.